For remote operations:

The following software must be installed, configured, and running prior to beginning the instructions in this guide:
2.1.	LogMeIn Hamachi must be running on both computers, with both joined to the LaserDemo virtual LAN. The software should already be installed on both computers. If you need to install Hamachi, the login and password information will be supplied separately.
2.1.1.	 Hamachi configuration settings:
	Hamachi configuration can be accessed via (Hamachi)->System->Preferences-> Settings
	•	Select “Advanced Settings” if not already shown
	•	Compression: any
	•	Traffic Filtering: allow all
2.2.	For the demo, webcams should be set up and running.
2.3.	Chrome Remote Desktop app must be running on the Offshore PC. The Onshore PC should connect to it through the web interface at https://remotedesktop.google.com/access. A Google account has been set up for remote desktop. Both systems should be logged in under the same account. The remote system should have the Chrome Remote Desktop app installed to provide access. The app should automatically start on boot, to 	enable remote login in the event of a computer reboot.
2.4.	Both computers will need the latest version of 3D Cloud Motion (8.04.07 or newer) and both running the same version.
2.5.	Both computers will require 7-zip to be installed.

For chrome remote desktop, Google account: 
LaserFish3d@gmail.com
Pw – same as the Factory mode configuration edit

when asked, make the computer pin:
Computer pin = 202005