20251103::064039.998:I: :3D: GUI Time Updated via GPS: 11 03 2025 06:40::39
20251103::064040.076:L: :3D: FAULT Power Voltages: Bus=3.3 V, Lsr=5.0
20251103::064040.139:I: :EC: EvoLase: 
20251103::064040.265:I: :EC:      EvoLase no initial data to collect
20251103::064041.514:I: :EC:      EvoLase Initialization Complete
20251103::064041.577:I: :EC: EvoLase Set TEC On
20251103::064041.641:I: :EC: Evolase Initialize, in standby
20251103::064041.705:I: :EC: Initializing Auto SHG Thermal control Object
20251103::064041.768:I: :EC:      Auto SHG Initialization Successful, Auto OFF 
20251103::064041.831:I: :EC: AutoSHG Initialize, in standby
20251103::064041.895:I: :EC: Initializing the I2C bus 0 Devices ...
20251103::064041.959:I: :EC: Initializing the I2C Bus 0 Select Successful.
20251103::064042.023:I: :EC: Initializing the A2D tec ch 0 Device 0x10 Successful.
20251103::064042.085:I: :EC: Initializing the A2D tec ch 1 Device 0x10 Successful.
20251103::064042.148:I: :EC: Initializing the A2D tec ch 2 Device 0x10 Successful.
20251103::064042.210:I: :EC: Initializing the A2D tec ch 3 Device 0x10 Successful.
20251103::064042.273:I: :EC: Initializing the A2D tec ch 4 Device 0x10 Successful.
20251103::064042.337:I: :EC: Initializing the A2D tec ch 5 Device 0x10 Successful.
20251103::064042.400:I: :EC: Initializing the A2D tec ch 6 Device 0x10 Successful.
20251103::064042.464:I: :EC: Initializing the A2D tec ch 7 Device 0x10 Successful.
20251103::064042.527:I: :EC: Initializing the A2D tec ch 8 Device 0x49 Successful.
20251103::064042.593:I: :EC: Initializing the Tec Temperature A2D 0x10 and 0x49 Successful.
20251103::064042.655:I: :EC: Initializing the Tec Command DAC 0x61 Successful.
20251103::064042.712:I: :EC: Initializing the SHT31 Humidity 1 Device 0x44 Successful.
20251103::064042.773:I: :EC: Initializing the SHT31 Temperature 1 Device 0x44 Successful.
20251103::064042.835:I: :EC: Initializing the SHT31 Humidity 2 Device 0x45 Successful.
20251103::064042.897:I: :EC: Initializing the SHT31 Temperature 2 Device 0x45 Successful.
20251103::064042.961:I: :EC: Initializing the SHT31 Humitidy and Temperature Devices Successful.
20251103::064043.021:I: :EC: Initializing the ADS1000 Device 0x48 Successful.
20251103::064043.085:I: :EC: Initializing the MCP4551T POT 1 Device 0x2E Success.
20251103::064043.148:I: :EC: Initializing the MCP4551T POT 2 Device 0x2F Success.
20251103::064043.210:I: :EC: Initializing the BME280 Device 0x76 Success.
20251103::064043.273:I: :EC: Initializing the CPU temperature Device Success.
20251103::064043.335:I: :EC: Detector 0 Bias cmd 28.00 volts, 43 Dac Counts
20251103::064043.396:I: :EC: Detector 1 Bias cmd 28.00 volts, 43 Dac Counts
20251103::064043.459:I: :EC: Detector 2 Bias cmd 28.00 volts, 43 Dac Counts
20251103::064043.522:I: :EC:      I2C Bus 0 Initialization Complete
20251103::064043.585:I: :EC: TecControl Initialize, in standby
20251103::064043.647:I: :EC: Memory is sized for 10050 pts/line and 14.500 Million pts/scan
20251103::064043.709:I: :EC: SL Sensor: SL4M-001
20251103::064043.771:I: :EC: Waiting for Hardware Initialization...
20251103::064043.912:L: :3D: Using new Factory configuration
20251103::064043.976:I: :EC: Loaded Extra Factory Parameters
20251103::064044.039:I: :EC: Initializing CTD Receive Object
20251103::064044.101:I: :EC:      CTD Initialization Successful, TCP Port:2003 
20251103::064044.162:I: :EC: Initializing Time Synchronization, Stand by ...
20251103::064044.411:I: :EC:  Time Sync set Hardware time from Clock
20251103::064044.473:I: :EC: SL Time Synchronization with Hardware and Software Complete.
20251103::064044.534:I: :EC:    Time Synchronization Configured for UDP Ethernet GpsZda Packet
20251103::064044.596:I: :EC: Time Synchronization Initialization Complete.
20251103::064044.658:I: :EC: Script Successfully setup
20251103::064044.720:I: :EC: 
20251103::064044.783:I: :EC: Successful Sensor Initialization
20251103::064044.846:I: :EC: 
20251103::064045.105:L: :3D: FAULT Power Voltages: Bus=7.7 V, Lsr=9.7
20251103::064045.169:L: :3D: Using new Factory configuration
20251103::064046.335:I: :3D: Successfully read Sensor User Configuration.
20251103::064046.335:I: :3D: Successfully read Factory Configuration.
20251103::064046.344:W: :3D:  UserConfig param GPS_SYNC_CLOCK = TRUE.
20251103::064047.861:E: :EC: Error: Time Sync, Invalid ZDA string, GPZDA,,,,,,*48  
20251103::064050.132:L: :3D: FAULT Power Voltages: Bus=12.0 V, Lsr=13.3
20251103::064052.220:E: :EC: Error: Time Sync, PPS not received
20251103::064052.288:L: :3D: lsr 22.2,digT 17.3,PBT 40.4,PBH 13.1,OCBT 52.4,OCBH 0.0,OPBT 0,Pan 0.000,Tlt 0.000,Pch 0.00,Rll 0.00,Att 
20251103::064055.238:L: :3D: FAULT Power Voltages: Bus=15.2 V, Lsr=15.9
20251103::064100.337:L: :3D: FAULT Power Voltages: Bus=17.1 V, Lsr=17.9
20251103::064112.341:L: :3D: lsr 22.3,digT 32.1,PBT 41.3,PBH 12.8,OCBT 52.4,OCBH 0.0,OPBT 0,Pan 0.000,Tlt 0.000,Pch 0.00,Rll 0.00,Att 
20251103::064132.467:L: :3D: lsr 22.4,digT 38.1,PBT 42.4,PBH 12.6,OCBT 52.4,OCBH 0.0,OPBT 0,Pan 0.000,Tlt 0.000,Pch 0.00,Rll 0.00,Att