20260726::203450.666:I: :3D: GUI Time Updated via GPS: 07 26 2026 20:34::50
20260726::203450.730:L: :3D: FAULT Power Voltages: Bus=3.3 V, Lsr=5.0
20260726::203450.730:L: :3D: lsr 20.0,digT 20.0,PBT 20.0,PBH 0.0,OCBT 0.0,OCBH 0.0,OPBT 0,Pan 0.000,Tlt 0.000,Pch 0.00,Rll 0.00,Att 0.
20260726::203450.792:L: :3D: Using new User configuration
20260726::203450.855:L: :3D: Using new Factory configuration
20260726::203450.918:I: :EC: 3D at Depth SL4 Sensor, Firmware Version 07.01.06.023
20260726::203450.980:I: :EC: Ethernet connection established with 3DCollect
20260726::203451.043:I: :EC: Booting SL Sensor, stand by...
20260726::203451.105:I: :EC: Initializing the EvoLase Laser...
20260726::203451.167:I: :EC: EvoLase port /dev/ttyS.LASER, baud rate is 115200
20260726::203451.293:I: :EC: EvoLase: 
20260726::203451.418:I: :EC:      EvoLase no initial data to collect
20260726::203452.650:I: :EC:      EvoLase Initialization Complete
20260726::203452.713:I: :EC: EvoLase Set TEC On
20260726::203452.776:I: :EC: Evolase Initialize, in standby
20260726::203452.839:I: :EC: Initializing Auto SHG Thermal control Object
20260726::203452.902:I: :EC:      Auto SHG Initialization Successful, Auto OFF 
20260726::203452.965:I: :EC: AutoSHG Initialize, in standby
20260726::203453.027:I: :EC: Initializing the I2C bus 0 Devices ...
20260726::203453.169:I: :EC: Initializing the I2C Bus 0 Select Successful.
20260726::203453.230:I: :EC: Initializing the A2D tec ch 0 Device 0x10 Successful.
20260726::203453.292:I: :EC: Initializing the A2D tec ch 1 Device 0x10 Successful.
20260726::203453.355:I: :EC: Initializing the A2D tec ch 2 Device 0x10 Successful.
20260726::203453.418:I: :EC: Initializing the A2D tec ch 3 Device 0x10 Successful.
20260726::203453.482:I: :EC: Initializing the A2D tec ch 4 Device 0x10 Successful.
20260726::203453.545:I: :EC: Initializing the A2D tec ch 5 Device 0x10 Successful.
20260726::203453.608:I: :EC: Initializing the A2D tec ch 6 Device 0x10 Successful.
20260726::203453.671:I: :EC: Initializing the A2D tec ch 7 Device 0x10 Successful.
20260726::203453.734:I: :EC: Initializing the A2D tec ch 8 Device 0x49 Successful.
20260726::203453.798:I: :EC: Initializing the Tec Temperature A2D 0x10 and 0x49 Successful.
20260726::203453.860:I: :EC: Initializing the Tec Command DAC 0x61 Successful.
20260726::203453.923:I: :EC: Initializing the SHT31 Humidity 1 Device 0x44 Successful.
20260726::203453.987:I: :EC: Initializing the SHT31 Temperature 1 Device 0x44 Successful.
20260726::203454.050:I: :EC: Initializing the SHT31 Humidity 2 Device 0x45 Successful.
20260726::203454.113:I: :EC: Initializing the SHT31 Temperature 2 Device 0x45 Successful.
20260726::203454.177:I: :EC: Initializing the SHT31 Humitidy and Temperature Devices Successful.
20260726::203454.239:I: :EC: Initializing the ADS1000 Device 0x48 Successful.
20260726::203454.302:I: :EC: Initializing the MCP4551T POT 1 Device 0x2E Success.
20260726::203454.366:I: :EC: Initializing the MCP4551T POT 2 Device 0x2F Success.
20260726::203454.429:I: :EC: Initializing the BME280 Device 0x76 Success.
20260726::203454.492:I: :EC: Initializing the CPU temperature Device Success.
20260726::203454.555:I: :EC: Detector 0 Bias cmd 28.00 volts, 43 Dac Counts
20260726::203454.618:I: :EC: Detector 1 Bias cmd 28.00 volts, 43 Dac Counts
20260726::203454.681:I: :EC: Detector 2 Bias cmd 28.00 volts, 43 Dac Counts
20260726::203454.745:I: :EC:      I2C Bus 0 Initialization Complete
20260726::203454.808:I: :EC: TecControl Initialize, in standby
20260726::203454.871:I: :EC: Memory is sized for 10050 pts/line and 14.500 Million pts/scan
20260726::203454.933:I: :EC: SL Sensor: SL4M-001
20260726::203454.996:I: :EC: Waiting for Hardware Initialization...
20260726::203455.121:L: :3D: Using new Factory configuration
20260726::203455.183:I: :EC: Loaded Extra Factory Parameters
20260726::203455.246:I: :EC: Initializing CTD Receive Object
20260726::203455.308:I: :EC:      CTD Initialization Successful, TCP Port:2003 
20260726::203455.372:I: :EC: Initializing Time Synchronization, Stand by ...
20260726::203455.625:I: :EC:  Time Sync set Hardware time from Clock
20260726::203455.688:I: :EC: SL Time Synchronization with Hardware and Software Complete.
20260726::203455.751:I: :EC:    Time Synchronization Configured for UDP Ethernet GpsZda Packet
20260726::203455.814:I: :EC: Time Synchronization Initialization Complete.
20260726::203455.876:I: :EC: Script Successfully setup
20260726::203455.940:I: :EC: 
20260726::203456.003:I: :EC: Successful Sensor Initialization
20260726::203456.066:I: :EC: 
20260726::203456.129:L: :3D: FAULT Power Voltages: Bus=8.4 V, Lsr=9.7
20260726::203456.271:I: :EC: CTD Ethernet connection established with CGUI
20260726::203456.461:L: :3D: Using new Factory configuration
20260726::203456.524:I: :EC: Loaded Extra Factory Parameters
20260726::203457.110:I: :EC: Time GpsZda Synchronization Achieved: 2026.07.17   17:56:57::0396
20260726::203457.426:I: :EC: Loaded Extra Factory Parameters
20260726::203457.553:L: :3D: Using new Factory configuration
20260726::203501.158:L: :3D: FAULT Power Voltages: Bus=12.0 V, Lsr=13.3
20260726::203503.136:I: :3D: Successfully read Sensor User Configuration.
20260726::203503.136:I: :3D: Successfully read Factory Configuration.
20260726::203503.155:W: :3D:  UserConfig param GPS_SYNC_CLOCK = TRUE.
20260726::203506.263:L: :3D: FAULT Power Voltages: Bus=15.1 V, Lsr=15.9
20260726::203510.761:L: :3D: lsr 15.0,digT 21.9,PBT 26.1,PBH 10.4,OCBT 52.4,OCBH 10.4,OPBT 0,Pan 0.000,Tlt 0.000,Pch 0.00,Rll 0.00,Att
20260726::203511.372:L: :3D: FAULT Power Voltages: Bus=17.7 V, Lsr=17.9
20260726::203530.892:L: :3D: lsr 15.0,digT 31.6,PBT 26.2,PBH 10.3,OCBT 52.4,OCBH 10.3,OPBT 0,Pan 0.000,Tlt 0.000,Pch 0.00,Rll 0.00,Att
20260726::203543.081:I: :3D: Scan Mode:2 Gain:1,1 Rng:20.00 Az:-60.00 60.00 4000 El:0.00 0.00 1000  Pan:0.00 Tilt:0.00
20260726::203543.081:I: :3D: TCP immediate command to adjust laser power to 0.0 mW
20260726::203543.212:I: :EC: EvoLase Set TEC On
20260726::203543.268:I: :EC: Loaded Extra Factory Parameters
20260726::203543.329:I: :EC: Starting Stable Platform ContinuousAz Scan ...
20260726::203543.391:I: :EC: Turning on laser now.
20260726::203543.512:I: :EC: EvoLase Set Temperature 55.3
20260726::203543.574:I: :EC: EvoLase Set TEC On
20260726::203543.636:I: :EC: Comm EC LASER GAIN cmd On, Pwr  60.0
20260726::203543.696:I: :EC: EC cmd Laser at Power  60.0 percent
20260726::203543.756:I: :EC: Attenuator Gain Mode is Manual(2) and voltage is   0.0,   0.0 percent
20260726::203543.946:I: :EC: Spin speed target is 50.00 Hz
20260726::203544.081:I: :EC: EvoLase 239 waiting for Thermal condition 54.20 == 55.30 cmd by 0.3C
20260726::203545.902:I: :EC: EvoLase Set Mode 0
20260726::203545.981:I: :EC: EvoLase Set Frequency 200000
20260726::203546.043:I: :EC: EvoLase Set Power 60.0
20260726::203546.358:I: :EC: EvoLase Set Emission On
20260726::203546.421:I: :EC: EvoLase Command success, turning on. TEC at 55.1 C
20260726::203546.484:I: :EC: Evolase: On 0, Power 0.0 of 60.0, F=200000 Hz
20260726::203546.547:I: :EC:        : Pump 15.0 C, Over 0, Tec On 1, 55.4 C, 0.5 A
20260726::203546.611:I: :EC:  Attenuator Map: Input 0, DAC 0, Ctrl 0x0,
20260726::203546.674:I: :EC: EvoLase Set Temperature 55.3
20260726::203546.801:I: :EC: EvoLase Set TEC On
20260726::203547.053:E: :EC: EvoLase Set Mode Failed lrmode usr 0 ERR 
20260726::203547.116:E: :EC: EvoLase Set Frequency Failed lrfreq usr 0 ERR 
20260726::203547.179:I: :EC: EvoLase Set Power 60.0
20260726::203547.242:E: :EC: EvoLase Command(s) failed, not turning on
20260726::203547.305:I: :EC: Evolase: On 1, Power 0.0 of 60.0, F=200000 Hz
20260726::203547.368:I: :EC:        : Pump 15.0 C, Over 0, Tec On 1, 55.5 C, 0.4 A
20260726::203547.431:I: :EC:  Attenuator Map: Input 0, DAC 0, Ctrl 0x0,
