<h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.<br><br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. <br><br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br><br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. Released under the Creative Commons Attribution Share-Alike 4.0 License https://creativecommons.org/licenses/by-sa/4.0/ Designed by: Date: >LAST_DATE_TIME Sheet: >SHEET REV: TITLE: >DRAWING_NAME Released under the Creative Commons Attribution Share-Alike 4.0 License https://creativecommons.org/licenses/by-sa/4.0/ Design by: >VALUE >VALUE >VALUE <b>Schematic Frame</b><p> Standard 8.5x11 US Letter frame <b>V_BATT</b><br> Generic symbol for the battery input to a system. <b>Open Source Hardware Logo</b> This logo indicates the piece of hardware it is found on incorporates a OSHW license and/or adheres to the definition of open source hardware found here: http://freedomdefined.org/OSHW <b>SUPPLY SYMBOL</b> <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.<br><br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. <br><br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br><br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. <b>8M, 8-Lead, 0.118" Wide, Miniature Small Outline Package</b><p> MSOP<br> 8M-Package doc1097.pdf >NAME >VALUE >NAME >VALUE <b>TO 92</b> >NAME >VALUE <b>SOT-223</b> >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE D S G >NAME >VALUE D S G >NAME >VALUE 30V Dual PMOS/NMOS MSOP-8<BR> NMOS RDS .11-ohm<BR> PMOS RDS .20-ohm<BR> TRANS-07913 <b>Generic NPN BJT</b> <p> MMBT2222A - TRANS-08049 (SOT-23, 1A 40V)<br> MPSA42 - TRANS-09116 (SOT-23, 500mA 300V)<br> MMBT5088LT1G - TRANS-11160 (SOT-23, 50 mA 30V)<br> </p> <ul> <li> BC547 - <a href="http://www.sparkfun.com/products/8928">COM-08928</a> (TO-92 45V 100mA) (1.Collector 2.Base 3.Emitter) </li> <li> 2N3904 - <a href="http://www.sparkfun.com/products/521">COM-00521</a> (TO-92 40V 200mA) (1.Emitter 2.Base 3.Collector) </li> <li> P2N2222A - <a href="http://www.sparkfun.com/products/12852">COM-12852</a> (TO-92 40V 600mA) (1.Collector 2.Base 3.Emitter) </li> </ul> <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. <br><br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br><br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >NAME >VALUE >NAME >VALUE >NAME >VALUE RES-07828 RES-00824 RES-08609 <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.<br><br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. <br><br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br><br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >NAME >VALUE >NAME >VALUE 2mm SMD side-entry connector. tDocu layer indicates the actual physical plastic housing. +/- indicate SparkFun standard batteries and wiring. >Name >Value + - >Name >Value >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE >Name >Value + - >NAME >VALUE >Name >Value + - <H3>JST-2-PTH-KIT</h3> 2-Pin JST, through-hole connector<br> <br> <b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side. >Name >Value + - >Name >Value + - >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also, if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. >NAME >VALUE >NAME >VALUE >NAME >VALUE thru-hole vertical Female Header used as an SMD part (placed horizontally, at board's edge) >NAME >VALUE Package for 4UCONN part #19686 *UNPROVEN* >Value >Name >NAME >VALUE >NAME >VALUE >NAME >VALUE British Telecom connector, used for Vernier sensors (analog) >NAME British Telecom connector, used for Vernier sensors (digital) >Name >NAME >VALUE Works with part #579 (https://www.sparkfun.com/products/579). Commonly used on GPS modules EM408, EM406 and GP-635T. Also compatible with cable 9123 (https://www.sparkfun.com/products/9123) and cable 574 (https://www.sparkfun.com/products/574). >Name >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE JST crimp connector: 1mm pitch, top entry >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME Standard 2-pin 0.1" header. Use with <br> - straight break away headers ( PRT-00116)<br> - right angle break away headers (PRT-00553)<br> - swiss pins (PRT-00743)<br> - machine pins (PRT-00117)<br> - female headers (PRT-00115)<br><br> Molex polarized connector foot print use with: PRT-08233 with associated crimp pins and housings.<br><br> 2.54_SCREWTERM for use with PRT-10571.<br><br> 3.5mm Screw Terminal footprints for PRT-08084<br><br> 5mm Screw Terminal footprints for use with PRT-08432 <b>Header 12</b> Standard 12-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). <b>Header 6</b><br> Standard 6-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). Molex polarized connector foot print use with SKU : PRT-08094 with associated crimp pins and housings.<p> NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS... This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side. This idea of altering the position of holes to aid alignment will be further integrated into the Sparkfun Library for other footprints. It can help hold any component with 3 or more connection pins. <b>Header 8</b> Standard 8-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). <b>Header 10</b> Standard 10-pin 0.1" header. Use with straight break away headers (SKU : PRT-00116), right angle break away headers (PRT-00553), swiss pins (PRT-00743), machine pins (PRT-00117), and female headers (PRT-00115). <b>Maxim Components</b><p> <author>Created by librarian@cadsoft.de</author> <b>micro MAX Package</b> >NAME >VALUE >NAME >VALUE <b>460kbps, 1µA Supply Current, RS-232-Compatible Transceivers in µMAX</b><p> Source: http://www.maxim-ic.com .. MAX3311-MAX3313.pdf <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.<br><br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. <br><br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br><br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >NAME >VALUE >NAME >VALUE CAP-08604 <h3>SparkFun Electronics' preferred foot prints</h3> In this library you'll find crystals and oscillators and other things that go "tick".<br><br> We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com. <br><br> <b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ <br><br> You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage. >NAME >NAME >VALUE SPI RTC module with battery backup and internal clock. <b>Analog Devices Components</b><p> <author>Created by librarian@cadsoft.de</author> <b>5-Lead Small Outline Transistor</b> Package SOT-23<p> Source: http://www.analog.com/UploadedFiles/Data_Sheets/346131962AD8067_a.pdf >NAME >VALUE >NAME >VALUE + - +VS -VS <b>Precision Micropower, Low Noise CMOS, Rail-to-Rail Input/Output Operational Amplifiers</b><p> Source: http://www.analog.com/static/imported-files/data_sheets/AD8603_8607_8609.pdf To 12V Battery Eliminator To LED Module 12-pin male headers on board top for Arduino Pro-Mini 6-pin, 8-pin, 8-pin, 10-pin female headers on board bottom for Arduino Yun Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.