Index of /internal/projects/901123.ROV1k/Mechanical/Solidworks files/smart clump

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]0019080601-054.sldprt2017-01-20 09:26 272K 
[ ]002 oring.SLDPRT2022-02-01 17:38 174K 
[ ]3_16 dowel pin.SLDPRT2024-05-16 17:27 84K 
[ ]881_gs_sonar.SLDPRT2022-02-01 17:38 65K 
[ ]3202_ATN9.sldasm2022-02-01 17:38 263K 
[ ]3202_ATN9_PART1.sldprt2022-02-01 17:38 176K 
[ ]3202_ATN9_PART2.sldprt2022-02-01 17:38 163K 
[ ]3202_ATN9_PART3.sldprt2022-02-01 17:38 111K 
[ ]3202_ATN9_PART4.sldprt2022-02-01 17:38 112K 
[ ]5463K249.SLDPRT2017-01-20 09:12 589K 
[ ]5972K242.SLDPRT2022-02-01 17:38 833K 
[ ]8020_1.5x3.SLDPRT2022-02-01 17:38 69K 
[ ]8020 frame.SLDASM2022-02-01 17:38 175K 
[ ]72510s.SLDPRT2022-02-01 17:38 648K 
[ ]94065K420.SLDPRT2022-02-01 17:38 55K 
[ ]97345A183.SLDPRT2022-02-01 17:38 631K 
[ ]98455A134.SLDPRT2022-02-01 17:38 76K 
[ ]98541A410.SLDPRT2022-02-01 17:38 90K 
[ ]99142A630.SLDPRT2022-02-01 17:38 77K 
[ ]B18.6.7M - M4 x 0.7 x 10 Type I Cross Recessed PHMS --10N.sldprt2017-02-22 08:37 151K 
[ ]Bumper.SLDPRT2017-01-20 09:13 78K 
[ ]CCP-A 600 Bar.SLDASM2018-04-20 08:10 836K 
[ ]CCP-A 600 Bar.sldprt2017-01-20 09:26 125K 
[ ]CLUMP_CAGE.SLDASM2018-04-20 08:10 117K 
[ ]CLUMP_CAGE_BACK.SLDPRT2017-01-20 09:26 82K 
[ ]CLUMP_CAGE_BOTTOM.SLDPRT2017-12-04 10:58 92K 
[ ]CLUMP_CAGE_FRONT.SLDPRT2017-01-20 09:26 62K 
[ ]CLUMP_CAGE_LIFT_BAR.SLDPRT2017-01-20 09:26 69K 
[ ]CLUMP_CAGE_ROV_TERM.SLDPRT2017-01-20 09:26 58K 
[ ]CLUMP_CAGE_SIDE.SLDPRT2017-01-20 09:26 74K 
[ ]CLUMP_CAGE_THRUSTER_TOP.SLDPRT2017-01-20 09:26 93K 
[ ]CLUMP_CAGE_TOP.SLDPRT2018-04-20 08:10 86K 
[ ]CLUMP_EPOD_ENDCAP1.SLDDRW2018-04-20 08:10 634K 
[ ]CLUMP_EPOD_ENDCAP1.SLDPRT2022-02-01 17:38 697K 
[ ]CLUMP_EPOD_HOUSING.SLDDRW2018-04-20 08:10 166K 
[ ]CLUMP_EPOD_HOUSING.SLDPRT2022-02-01 17:38 85K 
[ ]CLUMP_EPOD_HOUSING_ASM.SLDDRW2018-04-20 08:10 1.6M 
[ ]CLUMP_EPOD_HOUSING_ASM.sldasm2022-02-01 17:38 1.5M 
[ ]CLUMP_EPOD_RETAINER_RING.SLDPRT2022-02-01 17:38 118K 
[ ]CLUMP_EPOD_focal_907_baseplate.SLDPRT2022-02-01 17:38 485K 
[ ]CLUMP_TILT_ASSEMBLY.SLDASM2022-03-08 14:56 42K 
[ ]CLUMP_UMBILICAL_JBOX.SLDASM2022-02-01 17:38 297K 
[ ]CLUMP_epod_baseplate.SLDPRT2022-02-01 17:38 322K 
[ ]CLUMP_epod back plate.SLDPRT2022-02-01 17:38 154K 
[ ]CMC-P0653A 000XXX_ROTOR(P0653).sldprt2022-02-01 17:38 162K 
[ ]CMC-P0653A 000XXX_STATOR(P0653).sldprt2022-02-01 17:38 97K 
[ ]CR-FHMS 0.216-24x0.5x0.5-N.sldprt2017-02-22 08:37 154K 
[ ]Clevis.SLDPRT2017-01-20 09:13 189K 
[ ]Clump_Thruster assembly.SLDASM2022-02-01 17:38 4.1M 
[ ]Compensator_rev2.SLDASM2022-02-01 17:38 607K 
[ ]Controller assembly.sldasm2022-02-01 17:38 1.5M 
[ ]DSPL_LED.SLDPRT2017-01-20 09:20 203K 
[ ]EC-i_40_70w motor.SLDPRT2024-05-16 17:28 103K 
[ ]EPOD INTERNALS.SLDASM2018-04-20 08:09 5.3M 
[ ]Encoder 16 easy.SLDPRT2024-05-16 17:27 76K 
[ ]FCR-A 600 BAR.SLDPRT2017-01-20 09:26 1.1M 
[ ]Fitting_Mounting Connector.SLDPRT2022-02-01 17:38 863K 
[ ]Full Half Slider Rev A.SLDPRT2017-01-20 09:13 302K 
[ ]Full Mechanism Rev A.SLDASM2018-04-20 08:10 281K 
[ ]GP 42 C gear.SLDPRT2024-05-16 17:27 133K 
[ ]HD_FIELDofVIEW_FLAT.SLDPRT2018-04-20 12:36 51K 
[ ]HD_SEACAM.SLDPRT2022-02-01 17:38 168K 
[ ]HD_SEACAM_CLAMP.SLDPRT2022-02-01 17:38 156K 
[ ]HX-SHCS 0.164-32x0.5x0.5-N.sldprt2017-11-08 10:36 266K 
[ ]Hook.SLDDRW2018-04-20 08:10 147K 
[ ]Hook.SLDPRT2017-01-20 09:13 87K 
[ ]LIFT ARM DONUT.SLDDRW2018-04-20 08:10 307K 
[ ]LIFT ARM DONUT.SLDPRT2017-01-20 09:13 198K 
[ ]LIFT ARM PIVOT.SLDDRW2018-04-20 08:10 295K 
[ ]LIFT ARM PIVOT.SLDPRT2017-01-20 09:13 253K 
[ ]LIFT ARM STRAIN RELIEF_Assem.SLDASM2018-04-20 08:10 635K 
[ ]LIFT ARM TOP PIVOT.SLDDRW2018-04-20 08:10 454K 
[ ]LIFT ARM TOP PIVOT.SLDPRT2017-01-20 09:14 442K 
[ ]MINL-LONG.SLDPRT2022-02-01 17:38 61K 
[ ]NiskinBottle_CoarseModel.SLDPRT2022-02-02 14:44 240K 
[ ]PMCD1004.sldasm2024-05-16 17:27 155K 
[ ]PMCD1004_BODY.sldprt2024-05-16 17:27 200K 
[ ]PMC_LATCH.sldprt2024-05-16 17:27 147K 
[ ]Part24.SLDPRT2018-04-20 12:37 75K 
[ ]Pint Comp Piston.SLDPRT2022-02-01 17:38 61K 
[ ]Pint Comp Retainer.SLDPRT2022-02-01 17:38 122K 
[ ]Pint Comp base.SLDPRT2022-02-01 17:38 320K 
[ ]Reciever Rev A.SLDPRT2017-01-20 09:13 126K 
[ ]Resolver body.SLDPRT2022-02-01 17:38 88K 
[ ]Resolver rotor.SLDPRT2022-02-01 17:38 65K 
[ ]S-201017-11.slddrw2018-04-20 08:10 813K 
[ ]STRAIN RELIEF.SLDPRT2017-01-20 09:13 65K 
[ ]Seal ring.SLDPRT2022-02-01 17:38 116K 
[DIR]Smart Clump Thruster/2025-02-12 13:10 -  
[ ]SuperWideEye_camera.SLDPRT2022-02-01 17:38 135K 
[ ]Swivel Tab.SLDPRT2017-01-20 09:13 88K 
[ ]Thruster Housing Clamp.SLDPRT2018-05-01 14:22 98K 
[ ]Thruster Mount Lid.SLDPRT2022-02-01 17:38 129K 
[ ]Thruster_Board_Mount.SLDPRT2022-02-01 17:38 347K 
[ ]Thruster assembly.SLDASM2017-11-29 11:23 3.1M 
[ ]Thumbs.db2026-04-16 10:40 1.9M 
[ ]Thuster_Junction Box.SLDASM2022-02-01 17:38 629K 
[ ]Thuster_Junction Box.SLDDRW2018-04-20 08:10 3.1M 
[ ]UMBILICAL_JBOX.SLDASM2018-04-20 08:10 1.3M 
[ ]UMBILICAL_JBOX.SLDDRW2018-04-20 08:10 1.1M 
[ ]UMBILICAL_JBOX.SLDPRT2022-02-01 17:38 643K 
[ ]UMBILICAL_JBOX FO BRACKET.SLDDRW2018-04-20 08:10 649K 
[ ]UMBILICAL_JBOX FO BRACKET.SLDPRT2022-02-01 17:38 100K 
[ ]UMBILICAL_JBOX LID.SLDDRW2018-04-20 08:10 678K 
[ ]UMBILICAL_JBOX LID.SLDPRT2022-02-01 17:38 125K 
[ ]UMBILICAL_JBOX ST BARREL.SLDPRT2022-02-01 17:38 62K 
[ ]UMBILICAL_JBOX ST CONN.SLDPRT2022-02-01 17:38 53K 
[ ]UMBILICAL_JBOX TERMINAL.SLDPRT2017-01-20 09:20 200K 
[ ]UMBILICAL_JBOX_FLYING TETHER.SLDDRW2018-04-20 08:10 381K 
[ ]Valeport-VA500-Altimeter.sldprt2022-02-01 17:38 81K 
[ ]WHISTLE.SLDPRT2022-02-01 17:38 812K 
[ ]Wedge.SLDPRT2017-01-20 09:13 65K 
[ ]altimeter bracket.SLDPRT2022-02-01 17:38 56K 
[ ]bearing_resolver ring.SLDPRT2022-02-01 17:38 189K 
[ ]button anode_.75.SLDPRT2022-02-01 17:38 92K 
[ ]button anode assem.SLDASM2022-02-01 17:38 406K 
[ ]camera superwide bracket.SLDPRT2022-02-01 17:38 59K 
[ ]can mount.SLDPRT2018-04-20 08:28 64K 
[ ]clevis pin w cotter_92401A715.SLDPRT2017-01-20 09:13 135K 
[ ]clump.SLDASM2022-03-08 14:56 8.7M 
[ ]clump_rev1.SLDASM2018-02-05 15:50 5.1M 
[ ]comp assembly.SLDASM2022-02-01 17:38 906K 
[ ]comp bracket.SLDPRT2022-02-01 17:38 58K 
[ ]comp dome.SLDDRW2018-04-20 08:10 939K 
[ ]comp dome.SLDPRT2022-02-01 17:38 247K 
[ ]comp piston retainer plate.SLDDRW2018-04-20 08:10 661K 
[ ]comp piston retainer plate.SLDPRT2022-02-01 17:38 143K 
[ ]dcon_heading sensor.SLDPRT2022-02-01 17:38 65K 
[ ]delrin bushing_2705T310.SLDPRT2017-01-20 09:13 105K 
[ ]elmo base plate.SLDDRW2018-04-20 08:10 161K 
[ ]elmo base plate.SLDPRT2022-02-01 17:38 141K 
[ ]elmofilterboardr0-3_solid.SLDPRT2022-02-01 17:38 142K 
[ ]elmo housing.SLDDRW2018-04-20 08:10 248K 
[ ]elmo housing.SLDPRT2022-02-01 17:38 264K 
[ ]epod bracket.SLDPRT2022-02-01 17:38 97K 
[ ]flying tether attachment point.SLDPRT2022-02-01 17:38 85K 
[ ]frame 8020.SLDPRT2022-02-01 17:38 175K 
[ ]heading bracket.SLDPRT2022-02-01 17:38 57K 
[ ]heading sensor housing.SLDPRT2022-02-01 17:38 155K 
[ ]heading sensor housing assembly.SLDASM2022-02-01 17:38 179K 
[ ]heading sensor housing assembly.SLDDRW2018-04-20 08:10 2.1M 
[ ]heading sensor housing bracket.SLDPRT2017-01-20 09:20 230K 
[ ]heading sensor housing endcap.SLDPRT2022-02-01 17:38 214K 
[ ]housing.SLDDRW2018-04-20 08:10 906K 
[ ]housing.SLDPRT2022-02-01 17:38 222K 
[ ]jbox bracket.SLDPRT2022-02-01 17:38 94K 
[ ]lancer feedthru.SLDPRT2022-02-01 17:38 94K 
[ ]large prop.SLDPRT2022-02-01 17:38 121K 
[ ]lift plate.SLDPRT2022-02-01 17:38 77K 
[ ]lift ring spacer.SLDPRT2022-02-01 17:38 53K 
[ ]mink fcr.SLDPRT2022-02-01 17:38 110K 
[ ]motor assembly.sldasm2022-02-01 17:38 24K 
[ ]motor assembly_EC-i 40_70w.SLDASM2024-05-16 17:28 119K 
[ ]oil comp clampV3.SLDPRT2022-06-24 10:43 186K 
[ ]piston.SLDPRT2022-02-01 17:38 115K 
[ ]responder.SLDPRT2022-02-01 17:38 73K 
[ ]rovtool_positioncontroller_110516.SLDPRT2024-05-16 17:27 5.5M 
[ ]seal.SLDPRT2022-02-01 17:38 58K 
[ ]seal_12x20x5mm.SLDPRT2024-05-16 17:28 97K 
[ ]seal cap.SLDDRW2018-04-20 08:10 870K 
[ ]seal cap.sldprt2022-02-01 17:38 253K 
[ ]seal cap1.SLDDRW2018-04-20 08:10 1.1M 
[ ]shroud post.SLDPRT2022-02-01 17:38 80K 
[ ]small prop.SLDPRT2017-12-01 07:34 102K 
[ ]small shroud.SLDDRW2018-04-20 08:10 687K 
[ ]small shroud.SLDPRT2022-02-01 17:38 234K 
[ ]sonar bracket.SLDPRT2022-02-01 17:38 96K 
[ ]spur gear_ai.sldprt2017-02-15 10:58 326K 
[ ]square maxon gear motor assembly.SLDASM2022-02-01 17:38 1.7M 
[ ]square maxon gear pivot shaft.SLDDRW2018-04-20 08:10 180K 
[ ]square maxon gear pivot shaft.SLDPRT2024-05-16 17:27 107K 
[ ]square motor endcap_1.SLDPRT2024-05-16 17:28 184K 
[ ]square motor endcap_2.SLDPRT2024-05-16 17:27 193K 
[ ]square motor gearbox.SLDDRW2018-04-20 08:10 644K 
[ ]square motor housing.SLDDRW2018-04-20 08:10 171K 
[ ]square motor housing.SLDPRT2024-05-16 17:27 484K 
[ ]strain relief collar.SLDDRW2018-04-20 08:10 234K 
[ ]strain relief collar.SLDPRT2017-01-20 09:20 148K 
[ ]subconn conn.SLDPRT2024-05-16 17:28 80K 
[ ]suberwide_field of view.SLDPRT2022-02-01 17:38 54K 
[ ]superWideEye_camera assembly.SLDASM2022-02-01 17:38 118K 
[ ]thruster comp base.SLDDRW2018-04-20 08:10 949K 
[ ]thruster comp base.SLDPRT2022-02-01 17:38 192K 
[ ]thruster mount.SLDPRT2017-01-20 09:12 527K 
[ ]thruster shaft.SLDPRT2022-02-01 17:38 116K 
[ ]thruster shaft assembly.SLDASM2022-02-01 17:38 962K 
[ ]transponder bracket.SLDPRT2022-02-01 17:38 59K 
[ ]umbilical_jbox gland fitting.SLDPRT2022-02-01 17:38 149K 
[ ]~$002 oring.SLDPRT2022-02-28 11:42 7  
[ ]~$3_16 dowel pin.SLDPRT2022-02-28 11:42 7  
[ ]~$881_gs_sonar.SLDPRT2022-02-28 11:42 7  
[ ]~$3202_ATN9.sldasm2022-02-28 11:43 7  
[ ]~$3202_ATN9_PART1.sldprt2022-02-28 11:43 7  
[ ]~$3202_ATN9_PART2.sldprt2022-02-28 11:43 7  
[ ]~$3202_ATN9_PART3.sldprt2022-02-28 11:43 7  
[ ]~$3202_ATN9_PART4.sldprt2022-02-28 11:43 7  
[ ]~$5972K242.SLDPRT2022-02-28 11:43 7  
[ ]~$8020_1.5x3.SLDPRT2022-02-28 11:43 7  
[ ]~$8020 frame.SLDASM2022-02-28 11:43 7  
[ ]~$72510s.SLDPRT2022-02-28 11:43 7  
[ ]~$94065K420.SLDPRT2022-02-28 11:43 7  
[ ]~$97345A183.SLDPRT2022-02-28 11:42 7  
[ ]~$98455A134.SLDPRT2022-02-28 11:43 7  
[ ]~$98541A410.SLDPRT2022-02-28 11:43 7  
[ ]~$99142A630.SLDPRT2022-02-28 11:43 7  
[ ]~$CLUMP_EPOD_ENDCAP1.SLDPRT2022-02-28 11:42 7  
[ ]~$CLUMP_EPOD_HOUSING.SLDPRT2022-02-28 11:42 7  
[ ]~$CLUMP_EPOD_HOUSING_ASM.sldasm2022-02-28 11:42 7  
[ ]~$CLUMP_EPOD_RETAINER_RING.SLDPRT2022-02-28 11:42 7  
[ ]~$CLUMP_EPOD_focal_907_baseplate.SLDPRT2022-02-28 11:42 7  
[ ]~$CLUMP_TILT_ASSEMBLY.SLDASM2022-02-28 11:42 7  
[ ]~$CLUMP_UMBILICAL_JBOX.SLDASM2022-02-28 11:42 7  
[ ]~$CLUMP_epod_baseplate.SLDPRT2022-02-28 11:42 7  
[ ]~$CLUMP_epod back plate.SLDPRT2022-02-28 11:42 7  
[ ]~$CMC-P0653A 000XXX_ROTOR(P0653).sldprt2022-02-28 11:43 7  
[ ]~$CMC-P0653A 000XXX_STATOR(P0653).sldprt2022-02-28 11:43 7  
[ ]~$Clump_Thruster assembly.SLDASM2022-02-28 11:43 7  
[ ]~$Compensator_rev2.SLDASM2022-02-28 11:42 7  
[ ]~$Controller assembly.sldasm2022-02-28 11:43 7  
[ ]~$EC-i_40_70w motor.SLDPRT2022-02-28 11:42 7  
[ ]~$Encoder 16 easy.SLDPRT2022-02-28 11:42 7  
[ ]~$Fitting_Mounting Connector.SLDPRT2022-02-28 11:43 7  
[ ]~$GP 42 C gear.SLDPRT2022-02-28 11:42 7  
[ ]~$HD_SEACAM.SLDPRT2022-02-28 11:42 7  
[ ]~$HD_SEACAM_CLAMP.SLDPRT2022-02-28 11:42 7  
[ ]~$MINL-LONG.SLDPRT2022-02-28 11:42 7  
[ ]~$NiskinBottle_CoarseModel.SLDPRT2022-02-28 11:43 7  
[ ]~$PMCD1004.sldasm2022-02-28 11:42 7  
[ ]~$PMCD1004_BODY.sldprt2022-02-28 11:42 7  
[ ]~$PMC_LATCH.sldprt2022-02-28 11:42 7  
[ ]~$Pint Comp Piston.SLDPRT2022-02-28 11:42 7  
[ ]~$Pint Comp Retainer.SLDPRT2022-02-28 11:42 7  
[ ]~$Pint Comp base.SLDPRT2022-02-28 11:42 7  
[ ]~$Resolver body.SLDPRT2022-02-28 11:43 7  
[ ]~$Resolver rotor.SLDPRT2022-02-28 11:43 7  
[ ]~$Seal ring.SLDPRT2022-02-28 11:43 7  
[ ]~$SuperWideEye_camera.SLDPRT2022-02-28 11:42 7  
[ ]~$Thruster Mount Lid.SLDPRT2022-02-28 11:43 7  
[ ]~$Thruster_Board_Mount.SLDPRT2022-02-28 11:43 7  
[ ]~$Thuster_Junction Box.SLDASM2022-02-28 11:43 7  
[ ]~$UMBILICAL_JBOX.SLDPRT2022-02-28 11:42 7  
[ ]~$UMBILICAL_JBOX FO BRACKET.SLDPRT2022-02-28 11:42 7  
[ ]~$UMBILICAL_JBOX LID.SLDPRT2022-02-28 11:42 7  
[ ]~$UMBILICAL_JBOX ST BARREL.SLDPRT2022-02-28 11:42 7  
[ ]~$UMBILICAL_JBOX ST CONN.SLDPRT2022-02-28 11:42 7  
[ ]~$Valeport-VA500-Altimeter.sldprt2022-02-28 11:42 7  
[ ]~$WHISTLE.SLDPRT2022-02-28 11:43 7  
[ ]~$altimeter bracket.SLDPRT2022-02-28 11:43 7  
[ ]~$bearing_resolver ring.SLDPRT2022-02-28 11:43 7  
[ ]~$button anode_.75.SLDPRT2022-02-28 11:42 7  
[ ]~$button anode assem.SLDASM2022-02-28 11:42 7  
[ ]~$camera superwide bracket.SLDPRT2022-02-28 11:43 7  
[ ]~$clump.SLDASM2022-03-02 16:18 7  
[ ]~$comp assembly.SLDASM2022-02-28 11:43 7  
[ ]~$comp bracket.SLDPRT2022-02-28 11:43 7  
[ ]~$comp dome.SLDPRT2022-02-28 11:43 7  
[ ]~$comp piston retainer plate.SLDPRT2022-02-28 11:43 7  
[ ]~$dcon_heading sensor.SLDPRT2022-02-28 11:42 7  
[ ]~$elmo base plate.SLDPRT2022-02-28 11:43 7  
[ ]~$elmofilterboardr0-3_solid.SLDPRT2022-02-28 11:43 7  
[ ]~$elmo housing.SLDPRT2022-02-28 11:43 7  
[ ]~$epod bracket.SLDPRT2022-02-28 11:43 7  
[ ]~$flying tether attachment point.SLDPRT2022-02-28 11:43 7  
[ ]~$frame 8020.SLDPRT2022-02-28 11:43 7  
[ ]~$heading bracket.SLDPRT2022-02-28 11:43 7  
[ ]~$heading sensor housing.SLDPRT2022-02-28 11:42 7  
[ ]~$heading sensor housing assembly.SLDASM2022-02-28 11:42 7  
[ ]~$heading sensor housing endcap.SLDPRT2022-02-28 11:42 7  
[ ]~$housing.SLDPRT2022-02-28 11:43 7  
[ ]~$jbox bracket.SLDPRT2022-02-28 11:43 7  
[ ]~$lancer feedthru.SLDPRT2022-02-28 11:42 7  
[ ]~$lift plate.SLDPRT2022-02-28 11:43 7  
[ ]~$lift ring spacer.SLDPRT2022-02-28 11:43 7  
[ ]~$mink fcr.SLDPRT2022-02-28 11:42 7  
[ ]~$motor assembly.sldasm2022-02-28 11:43 7  
[ ]~$motor assembly_EC-i 40_70w.SLDASM2022-02-28 11:42 7  
[ ]~$oil comp clampV3.SLDPRT2022-02-28 11:42 7  
[ ]~$piston.SLDPRT2022-02-28 11:43 7  
[ ]~$responder.SLDPRT2022-02-28 11:42 7  
[ ]~$rovtool_positioncontroller_110516.SLDPRT2022-02-28 11:42 7  
[ ]~$seal.SLDPRT2022-02-28 11:43 7  
[ ]~$seal_12x20x5mm.SLDPRT2022-02-28 11:42 7  
[ ]~$seal cap.sldprt2022-02-28 11:43 7  
[ ]~$shroud post.SLDPRT2022-02-28 11:43 7  
[ ]~$small shroud.SLDPRT2022-02-28 11:43 7  
[ ]~$sonar bracket.SLDPRT2022-02-28 11:43 7  
[ ]~$square maxon gear motor assembly.SLDASM2022-02-28 11:42 7  
[ ]~$square maxon gear pivot shaft.SLDPRT2022-02-28 11:42 7  
[ ]~$square motor endcap_1.SLDPRT2022-02-28 11:42 7  
[ ]~$square motor endcap_2.SLDPRT2022-02-28 11:42 7  
[ ]~$square motor housing.SLDPRT2022-02-28 11:42 7  
[ ]~$subconn conn.SLDPRT2022-02-28 11:42 7  
[ ]~$suberwide_field of view.SLDPRT2022-02-28 11:42 7  
[ ]~$superWideEye_camera assembly.SLDASM2022-02-28 11:42 7  
[ ]~$thruster comp base.SLDPRT2022-02-28 11:43 7  
[ ]~$thruster shaft.SLDPRT2022-02-28 11:43 7  
[ ]~$thruster shaft assembly.SLDASM2022-02-28 11:43 7  
[ ]~$transponder bracket.SLDPRT2022-02-28 11:43 7  
[ ]~$umbilical_jbox gland fitting.SLDPRT2022-02-28 11:42 7  
Apache/2.4.52 (Ubuntu) Server at docs.mbari.org Port 80