PNI FieldForce TCM Instrument Driver Readme
To rate this instrument driver, go to the driver download page on the Instrument Driver Network.
1. Overview
Instrument Driver Technology: LabVIEW Plug and Play (project-style)
Manufacturer: PNI Sensor Corporation
Supported Language(s): LabVIEW
Supported Model(s): TCM 3, TCM 5, TCM XB
Model(s) Tested: FieldForce TCM XB
Interface(s): Serial
Firmware Revision(s) Tested: s606
Certified: Yes
NI Supported: Yes
Source Code Available: Yes
Driver Revision: 1.0
Original Release Date: 11/8/2010
Current Revision Date: 11/8/2010
2. Required Software
Some software components need to be installed before using this
instrument driver. The minimum versions of these components are listed
below, and can be downloaded from the Download Site.
VISA 4.1 or later
Refer to the LabVIEW Help for more information about software requirements. You access the LabVIEW Help by selecting Help»Search the LabVIEW Help.
3. Known Issues
To report issues or provide feedback about this instrument driver,
please send an email to instrument.drivers@ni.com.
This driver does not support calibration. To calibrate the device TCMStudio must be used.
4. Revision History
The latest version of this and other LabVIEW and LabWindows/CVI
instrument drivers can be downloaded at the Instrument Driver Network.
REV 1.0, 11/8/10
Modified by: Justin Parker, Austin,TX.
Original release.