/**
  System Interrupts Generated Driver File

  @Company:
    Microchip Technology Inc.

  @File Name:
    pin_manager.h

  @Summary:
    This is the generated manager file for the MPLAB� Code Configurator device.  This manager
    configures the pins direction, initial state, analog setting.
    The peripheral pin select, PPS, configuration is also handled by this manager.

  @Description:
    This source file provides implementations for MPLAB� Code Configurator interrupts.
    Generation Information :
        Product Revision  :  MPLAB� Code Configurator - v2.25.2
        Device            :  PIC24FJ256GA106
        Version           :  1.02
    The generated drivers are tested against the following:
        Compiler          :  XC16 v1.24
        MPLAB             :  MPLAB X v2.35 or v3.00
 */
/*
Copyright (c) 2013 - 2015 released Microchip Technology Inc.  All rights reserved.

Microchip licenses to you the right to use, modify, copy and distribute
Software only when embedded on a Microchip microcontroller or digital signal
controller that is integrated into your product or third party product
(pursuant to the sublicense terms in the accompanying license agreement).

You should refer to the license agreement accompanying this Software for
additional information regarding your rights and obligations.

SOFTWARE AND DOCUMENTATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE.
IN NO EVENT SHALL MICROCHIP OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER
CONTRACT, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR
OTHER LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR
CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT OF
SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
(INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
 */

#ifndef _PIN_MANAGER_H
#define _PIN_MANAGER_H
/**
    Section: Includes
 */
#include <xc.h>
/**
    Section: Device Pin Macros
 */
/**
  @Summary
    Sets the GPIO pin, RB0, high using LATB0.

  @Description
    Sets the GPIO pin, RB0, high using LATB0.

  @Preconditions
    The RB0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB0 high (1)
    VREFp_SetHigh();
    </code>

 */
#define VREFp_SetHigh()          _LATB0 = 1
/**
  @Summary
    Sets the GPIO pin, RB0, low using LATB0.

  @Description
    Sets the GPIO pin, RB0, low using LATB0.

  @Preconditions
    The RB0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB0 low (0)
    VREFp_SetLow();
    </code>

 */
#define VREFp_SetLow()           _LATB0 = 0
/**
  @Summary
    Toggles the GPIO pin, RB0, using LATB0.

  @Description
    Toggles the GPIO pin, RB0, using LATB0.

  @Preconditions
    The RB0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB0
    VREFp_SetToggle();
    </code>

 */
#define VREFp_Toggle()           _LATB0 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB0.

  @Description
    Reads the value of the GPIO pin, RB0.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB0
    postValue = VREFp_GetValue();
    </code>

 */
#define VREFp_GetValue()         _RB0
/**
  @Summary
    Configures the GPIO pin, RB0, as an input.

  @Description
    Configures the GPIO pin, RB0, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB0 as an input
    VREFp_SetDigitalInput();
    </code>

 */
#define VREFp_SetDigitalInput()  _TRISB0 = 1
/**
  @Summary
    Configures the GPIO pin, RB0, as an output.

  @Description
    Configures the GPIO pin, RB0, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB0 as an output
    VREFp_SetDigitalOutput();
    </code>

 */
#define VREFp_SetDigitalOutput() _TRISB0 = 0
/**
  @Summary
    Sets the GPIO pin, RB1, high using LATB1.

  @Description
    Sets the GPIO pin, RB1, high using LATB1.

  @Preconditions
    The RB1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB1 high (1)
    VREFn_SetHigh();
    </code>

 */
#define VREFn_SetHigh()          _LATB1 = 1
/**
  @Summary
    Sets the GPIO pin, RB1, low using LATB1.

  @Description
    Sets the GPIO pin, RB1, low using LATB1.

  @Preconditions
    The RB1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB1 low (0)
    VREFn_SetLow();
    </code>

 */
#define VREFn_SetLow()           _LATB1 = 0
/**
  @Summary
    Toggles the GPIO pin, RB1, using LATB1.

  @Description
    Toggles the GPIO pin, RB1, using LATB1.

  @Preconditions
    The RB1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB1
    VREFn_SetToggle();
    </code>

 */
#define VREFn_Toggle()           _LATB1 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB1.

  @Description
    Reads the value of the GPIO pin, RB1.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB1
    postValue = VREFn_GetValue();
    </code>

 */
#define VREFn_GetValue()         _RB1
/**
  @Summary
    Configures the GPIO pin, RB1, as an input.

  @Description
    Configures the GPIO pin, RB1, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB1 as an input
    VREFn_SetDigitalInput();
    </code>

 */
#define VREFn_SetDigitalInput()  _TRISB1 = 1
/**
  @Summary
    Configures the GPIO pin, RB1, as an output.

  @Description
    Configures the GPIO pin, RB1, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB1 as an output
    VREFn_SetDigitalOutput();
    </code>

 */
#define VREFn_SetDigitalOutput() _TRISB1 = 0
/**
  @Summary
    Sets the GPIO pin, RB2, high using LATB2.

  @Description
    Sets the GPIO pin, RB2, high using LATB2.

  @Preconditions
    The RB2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB2 high (1)
    IO_RB2_SetHigh();
    </code>

 */
#define IO_RB2_SetHigh()          _LATB2 = 1
/**
  @Summary
    Sets the GPIO pin, RB2, low using LATB2.

  @Description
    Sets the GPIO pin, RB2, low using LATB2.

  @Preconditions
    The RB2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB2 low (0)
    IO_RB2_SetLow();
    </code>

 */
#define IO_RB2_SetLow()           _LATB2 = 0
/**
  @Summary
    Toggles the GPIO pin, RB2, using LATB2.

  @Description
    Toggles the GPIO pin, RB2, using LATB2.

  @Preconditions
    The RB2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB2
    IO_RB2_SetToggle();
    </code>

 */
#define IO_RB2_Toggle()           _LATB2 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB2.

  @Description
    Reads the value of the GPIO pin, RB2.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB2
    postValue = IO_RB2_GetValue();
    </code>

 */
#define IO_RB2_GetValue()         _RB2
/**
  @Summary
    Configures the GPIO pin, RB2, as an input.

  @Description
    Configures the GPIO pin, RB2, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB2 as an input
    IO_RB2_SetDigitalInput();
    </code>

 */
#define IO_RB2_SetDigitalInput()  _TRISB2 = 1
/**
  @Summary
    Configures the GPIO pin, RB2, as an output.

  @Description
    Configures the GPIO pin, RB2, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB2 as an output
    IO_RB2_SetDigitalOutput();
    </code>

 */
#define IO_RB2_SetDigitalOutput() _TRISB2 = 0
/**
  @Summary
    Sets the GPIO pin, RB3, high using LATB3.

  @Description
    Sets the GPIO pin, RB3, high using LATB3.

  @Preconditions
    The RB3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB3 high (1)
    IO_RB3_SetHigh();
    </code>

 */
#define IO_RB3_SetHigh()          _LATB3 = 1
/**
  @Summary
    Sets the GPIO pin, RB3, low using LATB3.

  @Description
    Sets the GPIO pin, RB3, low using LATB3.

  @Preconditions
    The RB3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB3 low (0)
    IO_RB3_SetLow();
    </code>

 */
#define IO_RB3_SetLow()           _LATB3 = 0
/**
  @Summary
    Toggles the GPIO pin, RB3, using LATB3.

  @Description
    Toggles the GPIO pin, RB3, using LATB3.

  @Preconditions
    The RB3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB3
    IO_RB3_SetToggle();
    </code>

 */
#define IO_RB3_Toggle()           _LATB3 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB3.

  @Description
    Reads the value of the GPIO pin, RB3.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB3
    postValue = IO_RB3_GetValue();
    </code>

 */
#define IO_RB3_GetValue()         _RB3
/**
  @Summary
    Configures the GPIO pin, RB3, as an input.

  @Description
    Configures the GPIO pin, RB3, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB3 as an input
    IO_RB3_SetDigitalInput();
    </code>

 */
#define IO_RB3_SetDigitalInput()  _TRISB3 = 1
/**
  @Summary
    Configures the GPIO pin, RB3, as an output.

  @Description
    Configures the GPIO pin, RB3, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB3 as an output
    IO_RB3_SetDigitalOutput();
    </code>

 */
#define IO_RB3_SetDigitalOutput() _TRISB3 = 0
/**
  @Summary
    Sets the GPIO pin, RB6, high using LATB6.

  @Description
    Sets the GPIO pin, RB6, high using LATB6.

  @Preconditions
    The RB6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB6 high (1)
    Channel_AN6_SetHigh();
    </code>

 */
#define Channel_AN6_SetHigh()          _LATB6 = 1
/**
  @Summary
    Sets the GPIO pin, RB6, low using LATB6.

  @Description
    Sets the GPIO pin, RB6, low using LATB6.

  @Preconditions
    The RB6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB6 low (0)
    Channel_AN6_SetLow();
    </code>

 */
#define Channel_AN6_SetLow()           _LATB6 = 0
/**
  @Summary
    Toggles the GPIO pin, RB6, using LATB6.

  @Description
    Toggles the GPIO pin, RB6, using LATB6.

  @Preconditions
    The RB6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB6
    Channel_AN6_SetToggle();
    </code>

 */
#define Channel_AN6_Toggle()           _LATB6 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB6.

  @Description
    Reads the value of the GPIO pin, RB6.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB6
    postValue = Channel_AN6_GetValue();
    </code>

 */
#define Channel_AN6_GetValue()         _RB6
/**
  @Summary
    Configures the GPIO pin, RB6, as an input.

  @Description
    Configures the GPIO pin, RB6, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB6 as an input
    Channel_AN6_SetDigitalInput();
    </code>

 */
#define Channel_AN6_SetDigitalInput()  _TRISB6 = 1
/**
  @Summary
    Configures the GPIO pin, RB6, as an output.

  @Description
    Configures the GPIO pin, RB6, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB6 as an output
    Channel_AN6_SetDigitalOutput();
    </code>

 */
#define Channel_AN6_SetDigitalOutput() _TRISB6 = 0
/**
  @Summary
    Sets the GPIO pin, RB7, high using LATB7.

  @Description
    Sets the GPIO pin, RB7, high using LATB7.

  @Preconditions
    The RB7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB7 high (1)
    Channel_AN7_SetHigh();
    </code>

 */
#define Channel_AN7_SetHigh()          _LATB7 = 1
/**
  @Summary
    Sets the GPIO pin, RB7, low using LATB7.

  @Description
    Sets the GPIO pin, RB7, low using LATB7.

  @Preconditions
    The RB7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB7 low (0)
    Channel_AN7_SetLow();
    </code>

 */
#define Channel_AN7_SetLow()           _LATB7 = 0
/**
  @Summary
    Toggles the GPIO pin, RB7, using LATB7.

  @Description
    Toggles the GPIO pin, RB7, using LATB7.

  @Preconditions
    The RB7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB7
    Channel_AN7_SetToggle();
    </code>

 */
#define Channel_AN7_Toggle()           _LATB7 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB7.

  @Description
    Reads the value of the GPIO pin, RB7.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB7
    postValue = Channel_AN7_GetValue();
    </code>

 */
#define Channel_AN7_GetValue()         _RB7
/**
  @Summary
    Configures the GPIO pin, RB7, as an input.

  @Description
    Configures the GPIO pin, RB7, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB7 as an input
    Channel_AN7_SetDigitalInput();
    </code>

 */
#define Channel_AN7_SetDigitalInput()  _TRISB7 = 1
/**
  @Summary
    Configures the GPIO pin, RB7, as an output.

  @Description
    Configures the GPIO pin, RB7, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB7 as an output
    Channel_AN7_SetDigitalOutput();
    </code>

 */
#define Channel_AN7_SetDigitalOutput() _TRISB7 = 0
/**
  @Summary
    Sets the GPIO pin, RB8, high using LATB8.

  @Description
    Sets the GPIO pin, RB8, high using LATB8.

  @Preconditions
    The RB8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB8 high (1)
    Channel_AN8_SetHigh();
    </code>

 */
#define Channel_AN8_SetHigh()          _LATB8 = 1
/**
  @Summary
    Sets the GPIO pin, RB8, low using LATB8.

  @Description
    Sets the GPIO pin, RB8, low using LATB8.

  @Preconditions
    The RB8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB8 low (0)
    Channel_AN8_SetLow();
    </code>

 */
#define Channel_AN8_SetLow()           _LATB8 = 0
/**
  @Summary
    Toggles the GPIO pin, RB8, using LATB8.

  @Description
    Toggles the GPIO pin, RB8, using LATB8.

  @Preconditions
    The RB8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB8
    Channel_AN8_SetToggle();
    </code>

 */
#define Channel_AN8_Toggle()           _LATB8 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB8.

  @Description
    Reads the value of the GPIO pin, RB8.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB8
    postValue = Channel_AN8_GetValue();
    </code>

 */
#define Channel_AN8_GetValue()         _RB8
/**
  @Summary
    Configures the GPIO pin, RB8, as an input.

  @Description
    Configures the GPIO pin, RB8, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB8 as an input
    Channel_AN8_SetDigitalInput();
    </code>

 */
#define Channel_AN8_SetDigitalInput()  _TRISB8 = 1
/**
  @Summary
    Configures the GPIO pin, RB8, as an output.

  @Description
    Configures the GPIO pin, RB8, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB8 as an output
    Channel_AN8_SetDigitalOutput();
    </code>

 */
#define Channel_AN8_SetDigitalOutput() _TRISB8 = 0
/**
  @Summary
    Sets the GPIO pin, RB9, high using LATB9.

  @Description
    Sets the GPIO pin, RB9, high using LATB9.

  @Preconditions
    The RB9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB9 high (1)
    Channel_AN9_SetHigh();
    </code>

 */
#define Channel_AN9_SetHigh()          _LATB9 = 1
/**
  @Summary
    Sets the GPIO pin, RB9, low using LATB9.

  @Description
    Sets the GPIO pin, RB9, low using LATB9.

  @Preconditions
    The RB9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB9 low (0)
    Channel_AN9_SetLow();
    </code>

 */
#define Channel_AN9_SetLow()           _LATB9 = 0
/**
  @Summary
    Toggles the GPIO pin, RB9, using LATB9.

  @Description
    Toggles the GPIO pin, RB9, using LATB9.

  @Preconditions
    The RB9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB9
    Channel_AN9_SetToggle();
    </code>

 */
#define Channel_AN9_Toggle()           _LATB9 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB9.

  @Description
    Reads the value of the GPIO pin, RB9.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB9
    postValue = Channel_AN9_GetValue();
    </code>

 */
#define Channel_AN9_GetValue()         _RB9
/**
  @Summary
    Configures the GPIO pin, RB9, as an input.

  @Description
    Configures the GPIO pin, RB9, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB9 as an input
    Channel_AN9_SetDigitalInput();
    </code>

 */
#define Channel_AN9_SetDigitalInput()  _TRISB9 = 1
/**
  @Summary
    Configures the GPIO pin, RB9, as an output.

  @Description
    Configures the GPIO pin, RB9, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB9 as an output
    Channel_AN9_SetDigitalOutput();
    </code>

 */
#define Channel_AN9_SetDigitalOutput() _TRISB9 = 0
/**
  @Summary
    Sets the GPIO pin, RB10, high using LATB10.

  @Description
    Sets the GPIO pin, RB10, high using LATB10.

  @Preconditions
    The RB10 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB10 high (1)
    Channel_AN10_SetHigh();
    </code>

 */
#define Channel_AN10_SetHigh()          _LATB10 = 1
/**
  @Summary
    Sets the GPIO pin, RB10, low using LATB10.

  @Description
    Sets the GPIO pin, RB10, low using LATB10.

  @Preconditions
    The RB10 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB10 low (0)
    Channel_AN10_SetLow();
    </code>

 */
#define Channel_AN10_SetLow()           _LATB10 = 0
/**
  @Summary
    Toggles the GPIO pin, RB10, using LATB10.

  @Description
    Toggles the GPIO pin, RB10, using LATB10.

  @Preconditions
    The RB10 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB10
    Channel_AN10_SetToggle();
    </code>

 */
#define Channel_AN10_Toggle()           _LATB10 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB10.

  @Description
    Reads the value of the GPIO pin, RB10.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB10
    postValue = Channel_AN10_GetValue();
    </code>

 */
#define Channel_AN10_GetValue()         _RB10
/**
  @Summary
    Configures the GPIO pin, RB10, as an input.

  @Description
    Configures the GPIO pin, RB10, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB10 as an input
    Channel_AN10_SetDigitalInput();
    </code>

 */
#define Channel_AN10_SetDigitalInput()  _TRISB10 = 1
/**
  @Summary
    Configures the GPIO pin, RB10, as an output.

  @Description
    Configures the GPIO pin, RB10, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB10 as an output
    Channel_AN10_SetDigitalOutput();
    </code>

 */
#define Channel_AN10_SetDigitalOutput() _TRISB10 = 0
/**
  @Summary
    Sets the GPIO pin, RB11, high using LATB11.

  @Description
    Sets the GPIO pin, RB11, high using LATB11.

  @Preconditions
    The RB11 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB11 high (1)
    Channel_AN11_SetHigh();
    </code>

 */
#define Channel_AN11_SetHigh()          _LATB11 = 1
/**
  @Summary
    Sets the GPIO pin, RB11, low using LATB11.

  @Description
    Sets the GPIO pin, RB11, low using LATB11.

  @Preconditions
    The RB11 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB11 low (0)
    Channel_AN11_SetLow();
    </code>

 */
#define Channel_AN11_SetLow()           _LATB11 = 0
/**
  @Summary
    Toggles the GPIO pin, RB11, using LATB11.

  @Description
    Toggles the GPIO pin, RB11, using LATB11.

  @Preconditions
    The RB11 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB11
    Channel_AN11_SetToggle();
    </code>

 */
#define Channel_AN11_Toggle()           _LATB11 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB11.

  @Description
    Reads the value of the GPIO pin, RB11.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB11
    postValue = Channel_AN11_GetValue();
    </code>

 */
#define Channel_AN11_GetValue()         _RB11
/**
  @Summary
    Configures the GPIO pin, RB11, as an input.

  @Description
    Configures the GPIO pin, RB11, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB11 as an input
    Channel_AN11_SetDigitalInput();
    </code>

 */
#define Channel_AN11_SetDigitalInput()  _TRISB11 = 1
/**
  @Summary
    Configures the GPIO pin, RB11, as an output.

  @Description
    Configures the GPIO pin, RB11, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB11 as an output
    Channel_AN11_SetDigitalOutput();
    </code>

 */
#define Channel_AN11_SetDigitalOutput() _TRISB11 = 0
/**
  @Summary
    Sets the GPIO pin, RB12, high using LATB12.

  @Description
    Sets the GPIO pin, RB12, high using LATB12.

  @Preconditions
    The RB12 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB12 high (1)
    IO_RB12_SetHigh();
    </code>

 */
#define IO_RB12_SetHigh()          _LATB12 = 1
/**
  @Summary
    Sets the GPIO pin, RB12, low using LATB12.

  @Description
    Sets the GPIO pin, RB12, low using LATB12.

  @Preconditions
    The RB12 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB12 low (0)
    IO_RB12_SetLow();
    </code>

 */
#define IO_RB12_SetLow()           _LATB12 = 0
/**
  @Summary
    Toggles the GPIO pin, RB12, using LATB12.

  @Description
    Toggles the GPIO pin, RB12, using LATB12.

  @Preconditions
    The RB12 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB12
    IO_RB12_SetToggle();
    </code>

 */
#define IO_RB12_Toggle()           _LATB12 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB12.

  @Description
    Reads the value of the GPIO pin, RB12.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB12
    postValue = IO_RB12_GetValue();
    </code>

 */
#define IO_RB12_GetValue()         _RB12
/**
  @Summary
    Configures the GPIO pin, RB12, as an input.

  @Description
    Configures the GPIO pin, RB12, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB12 as an input
    IO_RB12_SetDigitalInput();
    </code>

 */
#define IO_RB12_SetDigitalInput()  _TRISB12 = 1
/**
  @Summary
    Configures the GPIO pin, RB12, as an output.

  @Description
    Configures the GPIO pin, RB12, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB12 as an output
    IO_RB12_SetDigitalOutput();
    </code>

 */
#define IO_RB12_SetDigitalOutput() _TRISB12 = 0
/**
  @Summary
    Sets the GPIO pin, RB13, high using LATB13.

  @Description
    Sets the GPIO pin, RB13, high using LATB13.

  @Preconditions
    The RB13 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB13 high (1)
    IO_RB13_SetHigh();
    </code>

 */
#define IO_RB13_SetHigh()          _LATB13 = 1
/**
  @Summary
    Sets the GPIO pin, RB13, low using LATB13.

  @Description
    Sets the GPIO pin, RB13, low using LATB13.

  @Preconditions
    The RB13 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB13 low (0)
    IO_RB13_SetLow();
    </code>

 */
#define IO_RB13_SetLow()           _LATB13 = 0
/**
  @Summary
    Toggles the GPIO pin, RB13, using LATB13.

  @Description
    Toggles the GPIO pin, RB13, using LATB13.

  @Preconditions
    The RB13 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB13
    IO_RB13_SetToggle();
    </code>

 */
#define IO_RB13_Toggle()           _LATB13 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB13.

  @Description
    Reads the value of the GPIO pin, RB13.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB13
    postValue = IO_RB13_GetValue();
    </code>

 */
#define IO_RB13_GetValue()         _RB13
/**
  @Summary
    Configures the GPIO pin, RB13, as an input.

  @Description
    Configures the GPIO pin, RB13, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB13 as an input
    IO_RB13_SetDigitalInput();
    </code>

 */
#define IO_RB13_SetDigitalInput()  _TRISB13 = 1
/**
  @Summary
    Configures the GPIO pin, RB13, as an output.

  @Description
    Configures the GPIO pin, RB13, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB13 as an output
    IO_RB13_SetDigitalOutput();
    </code>

 */
#define IO_RB13_SetDigitalOutput() _TRISB13 = 0
/**
  @Summary
    Sets the GPIO pin, RB14, high using LATB14.

  @Description
    Sets the GPIO pin, RB14, high using LATB14.

  @Preconditions
    The RB14 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB14 high (1)
    IO_RB14_SetHigh();
    </code>

 */
#define IO_RB14_SetHigh()          _LATB14 = 1
/**
  @Summary
    Sets the GPIO pin, RB14, low using LATB14.

  @Description
    Sets the GPIO pin, RB14, low using LATB14.

  @Preconditions
    The RB14 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB14 low (0)
    IO_RB14_SetLow();
    </code>

 */
#define IO_RB14_SetLow()           _LATB14 = 0
/**
  @Summary
    Toggles the GPIO pin, RB14, using LATB14.

  @Description
    Toggles the GPIO pin, RB14, using LATB14.

  @Preconditions
    The RB14 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB14
    IO_RB14_SetToggle();
    </code>

 */
#define IO_RB14_Toggle()           _LATB14 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB14.

  @Description
    Reads the value of the GPIO pin, RB14.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB14
    postValue = IO_RB14_GetValue();
    </code>

 */
#define IO_RB14_GetValue()         _RB14
/**
  @Summary
    Configures the GPIO pin, RB14, as an input.

  @Description
    Configures the GPIO pin, RB14, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB14 as an input
    IO_RB14_SetDigitalInput();
    </code>

 */
#define IO_RB14_SetDigitalInput()  _TRISB14 = 1
/**
  @Summary
    Configures the GPIO pin, RB14, as an output.

  @Description
    Configures the GPIO pin, RB14, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB14 as an output
    IO_RB14_SetDigitalOutput();
    </code>

 */
#define IO_RB14_SetDigitalOutput() _TRISB14 = 0
/**
  @Summary
    Sets the GPIO pin, RB15, high using LATB15.

  @Description
    Sets the GPIO pin, RB15, high using LATB15.

  @Preconditions
    The RB15 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB15 high (1)
    IO_RB15_SetHigh();
    </code>

 */
#define IO_RB15_SetHigh()          _LATB15 = 1
/**
  @Summary
    Sets the GPIO pin, RB15, low using LATB15.

  @Description
    Sets the GPIO pin, RB15, low using LATB15.

  @Preconditions
    The RB15 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RB15 low (0)
    IO_RB15_SetLow();
    </code>

 */
#define IO_RB15_SetLow()           _LATB15 = 0
/**
  @Summary
    Toggles the GPIO pin, RB15, using LATB15.

  @Description
    Toggles the GPIO pin, RB15, using LATB15.

  @Preconditions
    The RB15 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RB15
    IO_RB15_SetToggle();
    </code>

 */
#define IO_RB15_Toggle()           _LATB15 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RB15.

  @Description
    Reads the value of the GPIO pin, RB15.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RB15
    postValue = IO_RB15_GetValue();
    </code>

 */
#define IO_RB15_GetValue()         _RB15
/**
  @Summary
    Configures the GPIO pin, RB15, as an input.

  @Description
    Configures the GPIO pin, RB15, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB15 as an input
    IO_RB15_SetDigitalInput();
    </code>

 */
#define IO_RB15_SetDigitalInput()  _TRISB15 = 1
/**
  @Summary
    Configures the GPIO pin, RB15, as an output.

  @Description
    Configures the GPIO pin, RB15, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RB15 as an output
    IO_RB15_SetDigitalOutput();
    </code>

 */
#define IO_RB15_SetDigitalOutput() _TRISB15 = 0
/**
  @Summary
    Sets the GPIO pin, RC13, high using LATC13.

  @Description
    Sets the GPIO pin, RC13, high using LATC13.

  @Preconditions
    The RC13 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RC13 high (1)
    IO_RC13_SetHigh();
    </code>

 */
#define IO_RC13_SetHigh()          _LATC13 = 1
/**
  @Summary
    Sets the GPIO pin, RC13, low using LATC13.

  @Description
    Sets the GPIO pin, RC13, low using LATC13.

  @Preconditions
    The RC13 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RC13 low (0)
    IO_RC13_SetLow();
    </code>

 */
#define IO_RC13_SetLow()           _LATC13 = 0
/**
  @Summary
    Toggles the GPIO pin, RC13, using LATC13.

  @Description
    Toggles the GPIO pin, RC13, using LATC13.

  @Preconditions
    The RC13 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RC13
    IO_RC13_SetToggle();
    </code>

 */
#define IO_RC13_Toggle()           _LATC13 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RC13.

  @Description
    Reads the value of the GPIO pin, RC13.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RC13
    postValue = IO_RC13_GetValue();
    </code>

 */
#define IO_RC13_GetValue()         _RC13
/**
  @Summary
    Configures the GPIO pin, RC13, as an input.

  @Description
    Configures the GPIO pin, RC13, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RC13 as an input
    IO_RC13_SetDigitalInput();
    </code>

 */
#define IO_RC13_SetDigitalInput()  _TRISC13 = 1
/**
  @Summary
    Configures the GPIO pin, RC13, as an output.

  @Description
    Configures the GPIO pin, RC13, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RC13 as an output
    IO_RC13_SetDigitalOutput();
    </code>

 */
#define IO_RC13_SetDigitalOutput() _TRISC13 = 0
/**
  @Summary
    Sets the GPIO pin, RC14, high using LATC14.

  @Description
    Sets the GPIO pin, RC14, high using LATC14.

  @Preconditions
    The RC14 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RC14 high (1)
    IO_RC14_SetHigh();
    </code>

 */
#define IO_RC14_SetHigh()          _LATC14 = 1
/**
  @Summary
    Sets the GPIO pin, RC14, low using LATC14.

  @Description
    Sets the GPIO pin, RC14, low using LATC14.

  @Preconditions
    The RC14 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RC14 low (0)
    IO_RC14_SetLow();
    </code>

 */
#define IO_RC14_SetLow()           _LATC14 = 0
/**
  @Summary
    Toggles the GPIO pin, RC14, using LATC14.

  @Description
    Toggles the GPIO pin, RC14, using LATC14.

  @Preconditions
    The RC14 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RC14
    IO_RC14_SetToggle();
    </code>

 */
#define IO_RC14_Toggle()           _LATC14 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RC14.

  @Description
    Reads the value of the GPIO pin, RC14.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RC14
    postValue = IO_RC14_GetValue();
    </code>

 */
#define IO_RC14_GetValue()         _RC14
/**
  @Summary
    Configures the GPIO pin, RC14, as an input.

  @Description
    Configures the GPIO pin, RC14, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RC14 as an input
    IO_RC14_SetDigitalInput();
    </code>

 */
#define IO_RC14_SetDigitalInput()  _TRISC14 = 1
/**
  @Summary
    Configures the GPIO pin, RC14, as an output.

  @Description
    Configures the GPIO pin, RC14, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RC14 as an output
    IO_RC14_SetDigitalOutput();
    </code>

 */
#define IO_RC14_SetDigitalOutput() _TRISC14 = 0
/**
  @Summary
    Sets the GPIO pin, RD0, high using LATD0.

  @Description
    Sets the GPIO pin, RD0, high using LATD0.

  @Preconditions
    The RD0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD0 high (1)
    IO_RD0_SetHigh();
    </code>

 */
#define IO_RD0_SetHigh()          _LATD0 = 1
/**
  @Summary
    Sets the GPIO pin, RD0, low using LATD0.

  @Description
    Sets the GPIO pin, RD0, low using LATD0.

  @Preconditions
    The RD0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD0 low (0)
    IO_RD0_SetLow();
    </code>

 */
#define IO_RD0_SetLow()           _LATD0 = 0
/**
  @Summary
    Toggles the GPIO pin, RD0, using LATD0.

  @Description
    Toggles the GPIO pin, RD0, using LATD0.

  @Preconditions
    The RD0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD0
    IO_RD0_SetToggle();
    </code>

 */
#define IO_RD0_Toggle()           _LATD0 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD0.

  @Description
    Reads the value of the GPIO pin, RD0.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD0
    postValue = IO_RD0_GetValue();
    </code>

 */
#define IO_RD0_GetValue()         _RD0
/**
  @Summary
    Configures the GPIO pin, RD0, as an input.

  @Description
    Configures the GPIO pin, RD0, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD0 as an input
    IO_RD0_SetDigitalInput();
    </code>

 */
#define IO_RD0_SetDigitalInput()  _TRISD0 = 1
/**
  @Summary
    Configures the GPIO pin, RD0, as an output.

  @Description
    Configures the GPIO pin, RD0, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD0 as an output
    IO_RD0_SetDigitalOutput();
    </code>

 */
#define IO_RD0_SetDigitalOutput() _TRISD0 = 0
/**
  @Summary
    Sets the GPIO pin, RD1, high using LATD1.

  @Description
    Sets the GPIO pin, RD1, high using LATD1.

  @Preconditions
    The RD1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD1 high (1)
    U3TX_SetHigh();
    </code>

 */
#define U3TX_SetHigh()          _LATD1 = 1
/**
  @Summary
    Sets the GPIO pin, RD1, low using LATD1.

  @Description
    Sets the GPIO pin, RD1, low using LATD1.

  @Preconditions
    The RD1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD1 low (0)
    U3TX_SetLow();
    </code>

 */
#define U3TX_SetLow()           _LATD1 = 0
/**
  @Summary
    Toggles the GPIO pin, RD1, using LATD1.

  @Description
    Toggles the GPIO pin, RD1, using LATD1.

  @Preconditions
    The RD1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD1
    U3TX_SetToggle();
    </code>

 */
#define U3TX_Toggle()           _LATD1 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD1.

  @Description
    Reads the value of the GPIO pin, RD1.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD1
    postValue = U3TX_GetValue();
    </code>

 */
#define U3TX_GetValue()         _RD1
/**
  @Summary
    Configures the GPIO pin, RD1, as an input.

  @Description
    Configures the GPIO pin, RD1, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD1 as an input
    U3TX_SetDigitalInput();
    </code>

 */
#define U3TX_SetDigitalInput()  _TRISD1 = 1
/**
  @Summary
    Configures the GPIO pin, RD1, as an output.

  @Description
    Configures the GPIO pin, RD1, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD1 as an output
    U3TX_SetDigitalOutput();
    </code>

 */
#define U3TX_SetDigitalOutput() _TRISD1 = 0
/**
  @Summary
    Sets the GPIO pin, RD2, high using LATD2.

  @Description
    Sets the GPIO pin, RD2, high using LATD2.

  @Preconditions
    The RD2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD2 high (1)
    U3RX_SetHigh();
    </code>

 */
#define U3RX_SetHigh()          _LATD2 = 1
/**
  @Summary
    Sets the GPIO pin, RD2, low using LATD2.

  @Description
    Sets the GPIO pin, RD2, low using LATD2.

  @Preconditions
    The RD2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD2 low (0)
    U3RX_SetLow();
    </code>

 */
#define U3RX_SetLow()           _LATD2 = 0
/**
  @Summary
    Toggles the GPIO pin, RD2, using LATD2.

  @Description
    Toggles the GPIO pin, RD2, using LATD2.

  @Preconditions
    The RD2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD2
    U3RX_SetToggle();
    </code>

 */
#define U3RX_Toggle()           _LATD2 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD2.

  @Description
    Reads the value of the GPIO pin, RD2.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD2
    postValue = U3RX_GetValue();
    </code>

 */
#define U3RX_GetValue()         _RD2
/**
  @Summary
    Configures the GPIO pin, RD2, as an input.

  @Description
    Configures the GPIO pin, RD2, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD2 as an input
    U3RX_SetDigitalInput();
    </code>

 */
#define U3RX_SetDigitalInput()  _TRISD2 = 1
/**
  @Summary
    Configures the GPIO pin, RD2, as an output.

  @Description
    Configures the GPIO pin, RD2, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD2 as an output
    U3RX_SetDigitalOutput();
    </code>

 */
#define U3RX_SetDigitalOutput() _TRISD2 = 0
/**
  @Summary
    Sets the GPIO pin, RD3, high using LATD3.

  @Description
    Sets the GPIO pin, RD3, high using LATD3.

  @Preconditions
    The RD3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD3 high (1)
    IO_RD3_SetHigh();
    </code>

 */
#define IO_RD3_SetHigh()          _LATD3 = 1
/**
  @Summary
    Sets the GPIO pin, RD3, low using LATD3.

  @Description
    Sets the GPIO pin, RD3, low using LATD3.

  @Preconditions
    The RD3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD3 low (0)
    IO_RD3_SetLow();
    </code>

 */
#define IO_RD3_SetLow()           _LATD3 = 0
/**
  @Summary
    Toggles the GPIO pin, RD3, using LATD3.

  @Description
    Toggles the GPIO pin, RD3, using LATD3.

  @Preconditions
    The RD3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD3
    IO_RD3_SetToggle();
    </code>

 */
#define IO_RD3_Toggle()           _LATD3 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD3.

  @Description
    Reads the value of the GPIO pin, RD3.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD3
    postValue = IO_RD3_GetValue();
    </code>

 */
#define IO_RD3_GetValue()         _RD3
/**
  @Summary
    Configures the GPIO pin, RD3, as an input.

  @Description
    Configures the GPIO pin, RD3, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD3 as an input
    IO_RD3_SetDigitalInput();
    </code>

 */
#define IO_RD3_SetDigitalInput()  _TRISD3 = 1
/**
  @Summary
    Configures the GPIO pin, RD3, as an output.

  @Description
    Configures the GPIO pin, RD3, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD3 as an output
    IO_RD3_SetDigitalOutput();
    </code>

 */
#define IO_RD3_SetDigitalOutput() _TRISD3 = 0
/**
  @Summary
    Sets the GPIO pin, RD4, high using LATD4.

  @Description
    Sets the GPIO pin, RD4, high using LATD4.

  @Preconditions
    The RD4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD4 high (1)
    IO_RD4_SetHigh();
    </code>

 */
#define IO_RD4_SetHigh()          _LATD4 = 1
/**
  @Summary
    Sets the GPIO pin, RD4, low using LATD4.

  @Description
    Sets the GPIO pin, RD4, low using LATD4.

  @Preconditions
    The RD4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD4 low (0)
    IO_RD4_SetLow();
    </code>

 */
#define IO_RD4_SetLow()           _LATD4 = 0
/**
  @Summary
    Toggles the GPIO pin, RD4, using LATD4.

  @Description
    Toggles the GPIO pin, RD4, using LATD4.

  @Preconditions
    The RD4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD4
    IO_RD4_SetToggle();
    </code>

 */
#define IO_RD4_Toggle()           _LATD4 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD4.

  @Description
    Reads the value of the GPIO pin, RD4.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD4
    postValue = IO_RD4_GetValue();
    </code>

 */
#define IO_RD4_GetValue()         _RD4
/**
  @Summary
    Configures the GPIO pin, RD4, as an input.

  @Description
    Configures the GPIO pin, RD4, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD4 as an input
    IO_RD4_SetDigitalInput();
    </code>

 */
#define IO_RD4_SetDigitalInput()  _TRISD4 = 1
/**
  @Summary
    Configures the GPIO pin, RD4, as an output.

  @Description
    Configures the GPIO pin, RD4, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD4 as an output
    IO_RD4_SetDigitalOutput();
    </code>

 */
#define IO_RD4_SetDigitalOutput() _TRISD4 = 0
/**
  @Summary
    Sets the GPIO pin, RD5, high using LATD5.

  @Description
    Sets the GPIO pin, RD5, high using LATD5.

  @Preconditions
    The RD5 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD5 high (1)
    IO_RD5_SetHigh();
    </code>

 */
#define IO_RD5_SetHigh()          _LATD5 = 1
/**
  @Summary
    Sets the GPIO pin, RD5, low using LATD5.

  @Description
    Sets the GPIO pin, RD5, low using LATD5.

  @Preconditions
    The RD5 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD5 low (0)
    IO_RD5_SetLow();
    </code>

 */
#define IO_RD5_SetLow()           _LATD5 = 0
/**
  @Summary
    Toggles the GPIO pin, RD5, using LATD5.

  @Description
    Toggles the GPIO pin, RD5, using LATD5.

  @Preconditions
    The RD5 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD5
    IO_RD5_SetToggle();
    </code>

 */
#define IO_RD5_Toggle()           _LATD5 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD5.

  @Description
    Reads the value of the GPIO pin, RD5.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD5
    postValue = IO_RD5_GetValue();
    </code>

 */
#define IO_RD5_GetValue()         _RD5
/**
  @Summary
    Configures the GPIO pin, RD5, as an input.

  @Description
    Configures the GPIO pin, RD5, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD5 as an input
    IO_RD5_SetDigitalInput();
    </code>

 */
#define IO_RD5_SetDigitalInput()  _TRISD5 = 1
/**
  @Summary
    Configures the GPIO pin, RD5, as an output.

  @Description
    Configures the GPIO pin, RD5, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD5 as an output
    IO_RD5_SetDigitalOutput();
    </code>

 */
#define IO_RD5_SetDigitalOutput() _TRISD5 = 0
/**
  @Summary
    Sets the GPIO pin, RD6, high using LATD6.

  @Description
    Sets the GPIO pin, RD6, high using LATD6.

  @Preconditions
    The RD6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD6 high (1)
    IO_RD6_SetHigh();
    </code>

 */
#define IO_RD6_SetHigh()          _LATD6 = 1
/**
  @Summary
    Sets the GPIO pin, RD6, low using LATD6.

  @Description
    Sets the GPIO pin, RD6, low using LATD6.

  @Preconditions
    The RD6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD6 low (0)
    IO_RD6_SetLow();
    </code>

 */
#define IO_RD6_SetLow()           _LATD6 = 0
/**
  @Summary
    Toggles the GPIO pin, RD6, using LATD6.

  @Description
    Toggles the GPIO pin, RD6, using LATD6.

  @Preconditions
    The RD6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD6
    IO_RD6_SetToggle();
    </code>

 */
#define IO_RD6_Toggle()           _LATD6 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD6.

  @Description
    Reads the value of the GPIO pin, RD6.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD6
    postValue = IO_RD6_GetValue();
    </code>

 */
#define IO_RD6_GetValue()         _RD6
/**
  @Summary
    Configures the GPIO pin, RD6, as an input.

  @Description
    Configures the GPIO pin, RD6, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD6 as an input
    IO_RD6_SetDigitalInput();
    </code>

 */
#define IO_RD6_SetDigitalInput()  _TRISD6 = 1
/**
  @Summary
    Configures the GPIO pin, RD6, as an output.

  @Description
    Configures the GPIO pin, RD6, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD6 as an output
    IO_RD6_SetDigitalOutput();
    </code>

 */
#define IO_RD6_SetDigitalOutput() _TRISD6 = 0
/**
  @Summary
    Sets the GPIO pin, RD7, high using LATD7.

  @Description
    Sets the GPIO pin, RD7, high using LATD7.

  @Preconditions
    The RD7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD7 high (1)
    IO_RD7_SetHigh();
    </code>

 */
#define IO_RD7_SetHigh()          _LATD7 = 1
/**
  @Summary
    Sets the GPIO pin, RD7, low using LATD7.

  @Description
    Sets the GPIO pin, RD7, low using LATD7.

  @Preconditions
    The RD7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD7 low (0)
    IO_RD7_SetLow();
    </code>

 */
#define IO_RD7_SetLow()           _LATD7 = 0
/**
  @Summary
    Toggles the GPIO pin, RD7, using LATD7.

  @Description
    Toggles the GPIO pin, RD7, using LATD7.

  @Preconditions
    The RD7 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD7
    IO_RD7_SetToggle();
    </code>

 */
#define IO_RD7_Toggle()           _LATD7 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD7.

  @Description
    Reads the value of the GPIO pin, RD7.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD7
    postValue = IO_RD7_GetValue();
    </code>

 */
#define IO_RD7_GetValue()         _RD7
/**
  @Summary
    Configures the GPIO pin, RD7, as an input.

  @Description
    Configures the GPIO pin, RD7, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD7 as an input
    IO_RD7_SetDigitalInput();
    </code>

 */
#define IO_RD7_SetDigitalInput()  _TRISD7 = 1
/**
  @Summary
    Configures the GPIO pin, RD7, as an output.

  @Description
    Configures the GPIO pin, RD7, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD7 as an output
    IO_RD7_SetDigitalOutput();
    </code>

 */
#define IO_RD7_SetDigitalOutput() _TRISD7 = 0
/**
  @Summary
    Sets the GPIO pin, RD8, high using LATD8.

  @Description
    Sets the GPIO pin, RD8, high using LATD8.

  @Preconditions
    The RD8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD8 high (1)
    U2TX_SetHigh();
    </code>

 */
#define U2TX_SetHigh()          _LATD8 = 1
/**
  @Summary
    Sets the GPIO pin, RD8, low using LATD8.

  @Description
    Sets the GPIO pin, RD8, low using LATD8.

  @Preconditions
    The RD8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD8 low (0)
    U2TX_SetLow();
    </code>

 */
#define U2TX_SetLow()           _LATD8 = 0
/**
  @Summary
    Toggles the GPIO pin, RD8, using LATD8.

  @Description
    Toggles the GPIO pin, RD8, using LATD8.

  @Preconditions
    The RD8 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD8
    U2TX_SetToggle();
    </code>

 */
#define U2TX_Toggle()           _LATD8 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD8.

  @Description
    Reads the value of the GPIO pin, RD8.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD8
    postValue = U2TX_GetValue();
    </code>

 */
#define U2TX_GetValue()         _RD8
/**
  @Summary
    Configures the GPIO pin, RD8, as an input.

  @Description
    Configures the GPIO pin, RD8, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD8 as an input
    U2TX_SetDigitalInput();
    </code>

 */
#define U2TX_SetDigitalInput()  _TRISD8 = 1
/**
  @Summary
    Configures the GPIO pin, RD8, as an output.

  @Description
    Configures the GPIO pin, RD8, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD8 as an output
    U2TX_SetDigitalOutput();
    </code>

 */
#define U2TX_SetDigitalOutput() _TRISD8 = 0
/**
  @Summary
    Sets the GPIO pin, RD9, high using LATD9.

  @Description
    Sets the GPIO pin, RD9, high using LATD9.

  @Preconditions
    The RD9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD9 high (1)
    U2RX_SetHigh();
    </code>

 */
#define U2RX_SetHigh()          _LATD9 = 1
/**
  @Summary
    Sets the GPIO pin, RD9, low using LATD9.

  @Description
    Sets the GPIO pin, RD9, low using LATD9.

  @Preconditions
    The RD9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD9 low (0)
    U2RX_SetLow();
    </code>

 */
#define U2RX_SetLow()           _LATD9 = 0
/**
  @Summary
    Toggles the GPIO pin, RD9, using LATD9.

  @Description
    Toggles the GPIO pin, RD9, using LATD9.

  @Preconditions
    The RD9 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD9
    U2RX_SetToggle();
    </code>

 */
#define U2RX_Toggle()           _LATD9 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD9.

  @Description
    Reads the value of the GPIO pin, RD9.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD9
    postValue = U2RX_GetValue();
    </code>

 */
#define U2RX_GetValue()         _RD9
/**
  @Summary
    Configures the GPIO pin, RD9, as an input.

  @Description
    Configures the GPIO pin, RD9, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD9 as an input
    U2RX_SetDigitalInput();
    </code>

 */
#define U2RX_SetDigitalInput()  _TRISD9 = 1
/**
  @Summary
    Configures the GPIO pin, RD9, as an output.

  @Description
    Configures the GPIO pin, RD9, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD9 as an output
    U2RX_SetDigitalOutput();
    </code>

 */
#define U2RX_SetDigitalOutput() _TRISD9 = 0
/**
  @Summary
    Sets the GPIO pin, RD10, high using LATD10.

  @Description
    Sets the GPIO pin, RD10, high using LATD10.

  @Preconditions
    The RD10 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD10 high (1)
    IO_RD10_SetHigh();
    </code>

 */
#define IO_RD10_SetHigh()          _LATD10 = 1
/**
  @Summary
    Sets the GPIO pin, RD10, low using LATD10.

  @Description
    Sets the GPIO pin, RD10, low using LATD10.

  @Preconditions
    The RD10 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD10 low (0)
    IO_RD10_SetLow();
    </code>

 */
#define IO_RD10_SetLow()           _LATD10 = 0
/**
  @Summary
    Toggles the GPIO pin, RD10, using LATD10.

  @Description
    Toggles the GPIO pin, RD10, using LATD10.

  @Preconditions
    The RD10 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD10
    IO_RD10_SetToggle();
    </code>

 */
#define IO_RD10_Toggle()           _LATD10 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD10.

  @Description
    Reads the value of the GPIO pin, RD10.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD10
    postValue = IO_RD10_GetValue();
    </code>

 */
#define IO_RD10_GetValue()         _RD10
/**
  @Summary
    Configures the GPIO pin, RD10, as an input.

  @Description
    Configures the GPIO pin, RD10, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD10 as an input
    IO_RD10_SetDigitalInput();
    </code>

 */
#define IO_RD10_SetDigitalInput()  _TRISD10 = 1
/**
  @Summary
    Configures the GPIO pin, RD10, as an output.

  @Description
    Configures the GPIO pin, RD10, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD10 as an output
    IO_RD10_SetDigitalOutput();
    </code>

 */
#define IO_RD10_SetDigitalOutput() _TRISD10 = 0
/**
  @Summary
    Sets the GPIO pin, RD11, high using LATD11.

  @Description
    Sets the GPIO pin, RD11, high using LATD11.

  @Preconditions
    The RD11 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD11 high (1)
    IO_RD11_SetHigh();
    </code>

 */
#define IO_RD11_SetHigh()          _LATD11 = 1
/**
  @Summary
    Sets the GPIO pin, RD11, low using LATD11.

  @Description
    Sets the GPIO pin, RD11, low using LATD11.

  @Preconditions
    The RD11 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RD11 low (0)
    IO_RD11_SetLow();
    </code>

 */
#define IO_RD11_SetLow()           _LATD11 = 0
/**
  @Summary
    Toggles the GPIO pin, RD11, using LATD11.

  @Description
    Toggles the GPIO pin, RD11, using LATD11.

  @Preconditions
    The RD11 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RD11
    IO_RD11_SetToggle();
    </code>

 */
#define IO_RD11_Toggle()           _LATD11 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RD11.

  @Description
    Reads the value of the GPIO pin, RD11.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RD11
    postValue = IO_RD11_GetValue();
    </code>

 */
#define IO_RD11_GetValue()         _RD11
/**
  @Summary
    Configures the GPIO pin, RD11, as an input.

  @Description
    Configures the GPIO pin, RD11, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD11 as an input
    IO_RD11_SetDigitalInput();
    </code>

 */
#define IO_RD11_SetDigitalInput()  _TRISD11 = 1
/**
  @Summary
    Configures the GPIO pin, RD11, as an output.

  @Description
    Configures the GPIO pin, RD11, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RD11 as an output
    IO_RD11_SetDigitalOutput();
    </code>

 */
#define IO_RD11_SetDigitalOutput() _TRISD11 = 0
/**
  @Summary
    Sets the GPIO pin, RE0, high using LATE0.

  @Description
    Sets the GPIO pin, RE0, high using LATE0.

  @Preconditions
    The RE0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE0 high (1)
    IO_RE0_SetHigh();
    </code>

 */
#define IO_RE0_SetHigh()          _LATE0 = 1
/**
  @Summary
    Sets the GPIO pin, RE0, low using LATE0.

  @Description
    Sets the GPIO pin, RE0, low using LATE0.

  @Preconditions
    The RE0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE0 low (0)
    IO_RE0_SetLow();
    </code>

 */
#define IO_RE0_SetLow()           _LATE0 = 0
/**
  @Summary
    Toggles the GPIO pin, RE0, using LATE0.

  @Description
    Toggles the GPIO pin, RE0, using LATE0.

  @Preconditions
    The RE0 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RE0
    IO_RE0_SetToggle();
    </code>

 */
#define IO_RE0_Toggle()           _LATE0 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RE0.

  @Description
    Reads the value of the GPIO pin, RE0.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RE0
    postValue = IO_RE0_GetValue();
    </code>

 */
#define IO_RE0_GetValue()         _RE0
/**
  @Summary
    Configures the GPIO pin, RE0, as an input.

  @Description
    Configures the GPIO pin, RE0, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE0 as an input
    IO_RE0_SetDigitalInput();
    </code>

 */
#define IO_RE0_SetDigitalInput()  _TRISE0 = 1
/**
  @Summary
    Configures the GPIO pin, RE0, as an output.

  @Description
    Configures the GPIO pin, RE0, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE0 as an output
    IO_RE0_SetDigitalOutput();
    </code>

 */
#define IO_RE0_SetDigitalOutput() _TRISE0 = 0
/**
  @Summary
    Sets the GPIO pin, RE1, high using LATE1.

  @Description
    Sets the GPIO pin, RE1, high using LATE1.

  @Preconditions
    The RE1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE1 high (1)
    IO_RE1_SetHigh();
    </code>

 */
#define IO_RE1_SetHigh()          _LATE1 = 1
/**
  @Summary
    Sets the GPIO pin, RE1, low using LATE1.

  @Description
    Sets the GPIO pin, RE1, low using LATE1.

  @Preconditions
    The RE1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE1 low (0)
    IO_RE1_SetLow();
    </code>

 */
#define IO_RE1_SetLow()           _LATE1 = 0
/**
  @Summary
    Toggles the GPIO pin, RE1, using LATE1.

  @Description
    Toggles the GPIO pin, RE1, using LATE1.

  @Preconditions
    The RE1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RE1
    IO_RE1_SetToggle();
    </code>

 */
#define IO_RE1_Toggle()           _LATE1 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RE1.

  @Description
    Reads the value of the GPIO pin, RE1.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RE1
    postValue = IO_RE1_GetValue();
    </code>

 */
#define IO_RE1_GetValue()         _RE1
/**
  @Summary
    Configures the GPIO pin, RE1, as an input.

  @Description
    Configures the GPIO pin, RE1, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE1 as an input
    IO_RE1_SetDigitalInput();
    </code>

 */
#define IO_RE1_SetDigitalInput()  _TRISE1 = 1
/**
  @Summary
    Configures the GPIO pin, RE1, as an output.

  @Description
    Configures the GPIO pin, RE1, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE1 as an output
    IO_RE1_SetDigitalOutput();
    </code>

 */
#define IO_RE1_SetDigitalOutput() _TRISE1 = 0
/**
  @Summary
    Sets the GPIO pin, RE2, high using LATE2.

  @Description
    Sets the GPIO pin, RE2, high using LATE2.

  @Preconditions
    The RE2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE2 high (1)
    IO_RE2_SetHigh();
    </code>

 */
#define IO_RE2_SetHigh()          _LATE2 = 1
/**
  @Summary
    Sets the GPIO pin, RE2, low using LATE2.

  @Description
    Sets the GPIO pin, RE2, low using LATE2.

  @Preconditions
    The RE2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE2 low (0)
    IO_RE2_SetLow();
    </code>

 */
#define IO_RE2_SetLow()           _LATE2 = 0
/**
  @Summary
    Toggles the GPIO pin, RE2, using LATE2.

  @Description
    Toggles the GPIO pin, RE2, using LATE2.

  @Preconditions
    The RE2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RE2
    IO_RE2_SetToggle();
    </code>

 */
#define IO_RE2_Toggle()           _LATE2 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RE2.

  @Description
    Reads the value of the GPIO pin, RE2.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RE2
    postValue = IO_RE2_GetValue();
    </code>

 */
#define IO_RE2_GetValue()         _RE2
/**
  @Summary
    Configures the GPIO pin, RE2, as an input.

  @Description
    Configures the GPIO pin, RE2, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE2 as an input
    IO_RE2_SetDigitalInput();
    </code>

 */
#define IO_RE2_SetDigitalInput()  _TRISE2 = 1
/**
  @Summary
    Configures the GPIO pin, RE2, as an output.

  @Description
    Configures the GPIO pin, RE2, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE2 as an output
    IO_RE2_SetDigitalOutput();
    </code>

 */
#define IO_RE2_SetDigitalOutput() _TRISE2 = 0
/**
  @Summary
    Sets the GPIO pin, RE3, high using LATE3.

  @Description
    Sets the GPIO pin, RE3, high using LATE3.

  @Preconditions
    The RE3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE3 high (1)
    IO_RE3_SetHigh();
    </code>

 */
#define IO_RE3_SetHigh()          _LATE3 = 1
/**
  @Summary
    Sets the GPIO pin, RE3, low using LATE3.

  @Description
    Sets the GPIO pin, RE3, low using LATE3.

  @Preconditions
    The RE3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE3 low (0)
    IO_RE3_SetLow();
    </code>

 */
#define IO_RE3_SetLow()           _LATE3 = 0
/**
  @Summary
    Toggles the GPIO pin, RE3, using LATE3.

  @Description
    Toggles the GPIO pin, RE3, using LATE3.

  @Preconditions
    The RE3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RE3
    IO_RE3_SetToggle();
    </code>

 */
#define IO_RE3_Toggle()           _LATE3 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RE3.

  @Description
    Reads the value of the GPIO pin, RE3.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RE3
    postValue = IO_RE3_GetValue();
    </code>

 */
#define IO_RE3_GetValue()         _RE3
/**
  @Summary
    Configures the GPIO pin, RE3, as an input.

  @Description
    Configures the GPIO pin, RE3, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE3 as an input
    IO_RE3_SetDigitalInput();
    </code>

 */
#define IO_RE3_SetDigitalInput()  _TRISE3 = 1
/**
  @Summary
    Configures the GPIO pin, RE3, as an output.

  @Description
    Configures the GPIO pin, RE3, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE3 as an output
    IO_RE3_SetDigitalOutput();
    </code>

 */
#define IO_RE3_SetDigitalOutput() _TRISE3 = 0
/**
  @Summary
    Sets the GPIO pin, RE4, high using LATE4.

  @Description
    Sets the GPIO pin, RE4, high using LATE4.

  @Preconditions
    The RE4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE4 high (1)
    IO_RE4_SetHigh();
    </code>

 */
#define IO_RE4_SetHigh()          _LATE4 = 1
/**
  @Summary
    Sets the GPIO pin, RE4, low using LATE4.

  @Description
    Sets the GPIO pin, RE4, low using LATE4.

  @Preconditions
    The RE4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RE4 low (0)
    IO_RE4_SetLow();
    </code>

 */
#define IO_RE4_SetLow()           _LATE4 = 0
/**
  @Summary
    Toggles the GPIO pin, RE4, using LATE4.

  @Description
    Toggles the GPIO pin, RE4, using LATE4.

  @Preconditions
    The RE4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RE4
    IO_RE4_SetToggle();
    </code>

 */
#define IO_RE4_Toggle()           _LATE4 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RE4.

  @Description
    Reads the value of the GPIO pin, RE4.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RE4
    postValue = IO_RE4_GetValue();
    </code>

 */
#define IO_RE4_GetValue()         _RE4
/**
  @Summary
    Configures the GPIO pin, RE4, as an input.

  @Description
    Configures the GPIO pin, RE4, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE4 as an input
    IO_RE4_SetDigitalInput();
    </code>

 */
#define IO_RE4_SetDigitalInput()  _TRISE4 = 1
/**
  @Summary
    Configures the GPIO pin, RE4, as an output.

  @Description
    Configures the GPIO pin, RE4, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RE4 as an output
    IO_RE4_SetDigitalOutput();
    </code>

 */
#define IO_RE4_SetDigitalOutput() _TRISE4 = 0
/**
  @Summary
    Sets the GPIO pin, RF1, high using LATF1.

  @Description
    Sets the GPIO pin, RF1, high using LATF1.

  @Preconditions
    The RF1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF1 high (1)
    IO_RF1_SetHigh();
    </code>

 */
#define IO_RF1_SetHigh()          _LATF1 = 1
/**
  @Summary
    Sets the GPIO pin, RF1, low using LATF1.

  @Description
    Sets the GPIO pin, RF1, low using LATF1.

  @Preconditions
    The RF1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF1 low (0)
    IO_RF1_SetLow();
    </code>

 */
#define IO_RF1_SetLow()           _LATF1 = 0
/**
  @Summary
    Toggles the GPIO pin, RF1, using LATF1.

  @Description
    Toggles the GPIO pin, RF1, using LATF1.

  @Preconditions
    The RF1 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RF1
    IO_RF1_SetToggle();
    </code>

 */
#define IO_RF1_Toggle()           _LATF1 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RF1.

  @Description
    Reads the value of the GPIO pin, RF1.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RF1
    postValue = IO_RF1_GetValue();
    </code>

 */
#define IO_RF1_GetValue()         _RF1
/**
  @Summary
    Configures the GPIO pin, RF1, as an input.

  @Description
    Configures the GPIO pin, RF1, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF1 as an input
    IO_RF1_SetDigitalInput();
    </code>

 */
#define IO_RF1_SetDigitalInput()  _TRISF1 = 1
/**
  @Summary
    Configures the GPIO pin, RF1, as an output.

  @Description
    Configures the GPIO pin, RF1, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF1 as an output
    IO_RF1_SetDigitalOutput();
    </code>

 */
#define IO_RF1_SetDigitalOutput() _TRISF1 = 0
/**
  @Summary
    Sets the GPIO pin, RF2, high using LATF2.

  @Description
    Sets the GPIO pin, RF2, high using LATF2.

  @Preconditions
    The RF2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF2 high (1)
    IO_RF2_SetHigh();
    </code>

 */
#define IO_RF2_SetHigh()          _LATF2 = 1
/**
  @Summary
    Sets the GPIO pin, RF2, low using LATF2.

  @Description
    Sets the GPIO pin, RF2, low using LATF2.

  @Preconditions
    The RF2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF2 low (0)
    IO_RF2_SetLow();
    </code>

 */
#define IO_RF2_SetLow()           _LATF2 = 0
/**
  @Summary
    Toggles the GPIO pin, RF2, using LATF2.

  @Description
    Toggles the GPIO pin, RF2, using LATF2.

  @Preconditions
    The RF2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RF2
    IO_RF2_SetToggle();
    </code>

 */
#define IO_RF2_Toggle()           _LATF2 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RF2.

  @Description
    Reads the value of the GPIO pin, RF2.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RF2
    postValue = IO_RF2_GetValue();
    </code>

 */
#define IO_RF2_GetValue()         _RF2
/**
  @Summary
    Configures the GPIO pin, RF2, as an input.

  @Description
    Configures the GPIO pin, RF2, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF2 as an input
    IO_RF2_SetDigitalInput();
    </code>

 */
#define IO_RF2_SetDigitalInput()  _TRISF2 = 1
/**
  @Summary
    Configures the GPIO pin, RF2, as an output.

  @Description
    Configures the GPIO pin, RF2, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF2 as an output
    IO_RF2_SetDigitalOutput();
    </code>

 */
#define IO_RF2_SetDigitalOutput() _TRISF2 = 0
/**
  @Summary
    Sets the GPIO pin, RF3, high using LATF3.

  @Description
    Sets the GPIO pin, RF3, high using LATF3.

  @Preconditions
    The RF3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF3 high (1)
    U1TX_SetHigh();
    </code>

 */
#define U1TX_SetHigh()          _LATF3 = 1
/**
  @Summary
    Sets the GPIO pin, RF3, low using LATF3.

  @Description
    Sets the GPIO pin, RF3, low using LATF3.

  @Preconditions
    The RF3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF3 low (0)
    U1TX_SetLow();
    </code>

 */
#define U1TX_SetLow()           _LATF3 = 0
/**
  @Summary
    Toggles the GPIO pin, RF3, using LATF3.

  @Description
    Toggles the GPIO pin, RF3, using LATF3.

  @Preconditions
    The RF3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RF3
    U1TX_SetToggle();
    </code>

 */
#define U1TX_Toggle()           _LATF3 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RF3.

  @Description
    Reads the value of the GPIO pin, RF3.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RF3
    postValue = U1TX_GetValue();
    </code>

 */
#define U1TX_GetValue()         _RF3
/**
  @Summary
    Configures the GPIO pin, RF3, as an input.

  @Description
    Configures the GPIO pin, RF3, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF3 as an input
    U1TX_SetDigitalInput();
    </code>

 */
#define U1TX_SetDigitalInput()  _TRISF3 = 1
/**
  @Summary
    Configures the GPIO pin, RF3, as an output.

  @Description
    Configures the GPIO pin, RF3, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF3 as an output
    U1TX_SetDigitalOutput();
    </code>

 */
#define U1TX_SetDigitalOutput() _TRISF3 = 0
/**
  @Summary
    Sets the GPIO pin, RF4, high using LATF4.

  @Description
    Sets the GPIO pin, RF4, high using LATF4.

  @Preconditions
    The RF4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF4 high (1)
    IO_RF4_SetHigh();
    </code>

 */
#define IO_RF4_SetHigh()          _LATF4 = 1
/**
  @Summary
    Sets the GPIO pin, RF4, low using LATF4.

  @Description
    Sets the GPIO pin, RF4, low using LATF4.

  @Preconditions
    The RF4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF4 low (0)
    IO_RF4_SetLow();
    </code>

 */
#define IO_RF4_SetLow()           _LATF4 = 0
/**
  @Summary
    Toggles the GPIO pin, RF4, using LATF4.

  @Description
    Toggles the GPIO pin, RF4, using LATF4.

  @Preconditions
    The RF4 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RF4
    IO_RF4_SetToggle();
    </code>

 */
#define IO_RF4_Toggle()           _LATF4 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RF4.

  @Description
    Reads the value of the GPIO pin, RF4.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RF4
    postValue = IO_RF4_GetValue();
    </code>

 */
#define IO_RF4_GetValue()         _RF4
/**
  @Summary
    Configures the GPIO pin, RF4, as an input.

  @Description
    Configures the GPIO pin, RF4, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF4 as an input
    IO_RF4_SetDigitalInput();
    </code>

 */
#define IO_RF4_SetDigitalInput()  _TRISF4 = 1
/**
  @Summary
    Configures the GPIO pin, RF4, as an output.

  @Description
    Configures the GPIO pin, RF4, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF4 as an output
    IO_RF4_SetDigitalOutput();
    </code>

 */
#define IO_RF4_SetDigitalOutput() _TRISF4 = 0
/**
  @Summary
    Sets the GPIO pin, RF6, high using LATF6.

  @Description
    Sets the GPIO pin, RF6, high using LATF6.

  @Preconditions
    The RF6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF6 high (1)
    U1RX_SetHigh();
    </code>

 */
#define U1RX_SetHigh()          _LATF6 = 1
/**
  @Summary
    Sets the GPIO pin, RF6, low using LATF6.

  @Description
    Sets the GPIO pin, RF6, low using LATF6.

  @Preconditions
    The RF6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RF6 low (0)
    U1RX_SetLow();
    </code>

 */
#define U1RX_SetLow()           _LATF6 = 0
/**
  @Summary
    Toggles the GPIO pin, RF6, using LATF6.

  @Description
    Toggles the GPIO pin, RF6, using LATF6.

  @Preconditions
    The RF6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RF6
    U1RX_SetToggle();
    </code>

 */
#define U1RX_Toggle()           _LATF6 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RF6.

  @Description
    Reads the value of the GPIO pin, RF6.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RF6
    postValue = U1RX_GetValue();
    </code>

 */
#define U1RX_GetValue()         _RF6
/**
  @Summary
    Configures the GPIO pin, RF6, as an input.

  @Description
    Configures the GPIO pin, RF6, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF6 as an input
    U1RX_SetDigitalInput();
    </code>

 */
#define U1RX_SetDigitalInput()  _TRISF6 = 1
/**
  @Summary
    Configures the GPIO pin, RF6, as an output.

  @Description
    Configures the GPIO pin, RF6, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RF6 as an output
    U1RX_SetDigitalOutput();
    </code>

 */
#define U1RX_SetDigitalOutput() _TRISF6 = 0
/**
  @Summary
    Sets the GPIO pin, RG2, high using LATG2.

  @Description
    Sets the GPIO pin, RG2, high using LATG2.

  @Preconditions
    The RG2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RG2 high (1)
    IO_RG2_SetHigh();
    </code>

 */
#define IO_RG2_SetHigh()          _LATG2 = 1
/**
  @Summary
    Sets the GPIO pin, RG2, low using LATG2.

  @Description
    Sets the GPIO pin, RG2, low using LATG2.

  @Preconditions
    The RG2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RG2 low (0)
    IO_RG2_SetLow();
    </code>

 */
#define IO_RG2_SetLow()           _LATG2 = 0
/**
  @Summary
    Toggles the GPIO pin, RG2, using LATG2.

  @Description
    Toggles the GPIO pin, RG2, using LATG2.

  @Preconditions
    The RG2 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RG2
    IO_RG2_SetToggle();
    </code>

 */
#define IO_RG2_Toggle()           _LATG2 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RG2.

  @Description
    Reads the value of the GPIO pin, RG2.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RG2
    postValue = IO_RG2_GetValue();
    </code>

 */
#define IO_RG2_GetValue()         _RG2
/**
  @Summary
    Configures the GPIO pin, RG2, as an input.

  @Description
    Configures the GPIO pin, RG2, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RG2 as an input
    IO_RG2_SetDigitalInput();
    </code>

 */
#define IO_RG2_SetDigitalInput()  _TRISG2 = 1
/**
  @Summary
    Configures the GPIO pin, RG2, as an output.

  @Description
    Configures the GPIO pin, RG2, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RG2 as an output
    IO_RG2_SetDigitalOutput();
    </code>

 */
#define IO_RG2_SetDigitalOutput() _TRISG2 = 0
/**
  @Summary
    Sets the GPIO pin, RG3, high using LATG3.

  @Description
    Sets the GPIO pin, RG3, high using LATG3.

  @Preconditions
    The RG3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RG3 high (1)
    IO_RG3_SetHigh();
    </code>

 */
#define IO_RG3_SetHigh()          _LATG3 = 1
/**
  @Summary
    Sets the GPIO pin, RG3, low using LATG3.

  @Description
    Sets the GPIO pin, RG3, low using LATG3.

  @Preconditions
    The RG3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RG3 low (0)
    IO_RG3_SetLow();
    </code>

 */
#define IO_RG3_SetLow()           _LATG3 = 0
/**
  @Summary
    Toggles the GPIO pin, RG3, using LATG3.

  @Description
    Toggles the GPIO pin, RG3, using LATG3.

  @Preconditions
    The RG3 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RG3
    IO_RG3_SetToggle();
    </code>

 */
#define IO_RG3_Toggle()           _LATG3 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RG3.

  @Description
    Reads the value of the GPIO pin, RG3.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RG3
    postValue = IO_RG3_GetValue();
    </code>

 */
#define IO_RG3_GetValue()         _RG3
/**
  @Summary
    Configures the GPIO pin, RG3, as an input.

  @Description
    Configures the GPIO pin, RG3, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RG3 as an input
    IO_RG3_SetDigitalInput();
    </code>

 */
#define IO_RG3_SetDigitalInput()  _TRISG3 = 1
/**
  @Summary
    Configures the GPIO pin, RG3, as an output.

  @Description
    Configures the GPIO pin, RG3, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RG3 as an output
    IO_RG3_SetDigitalOutput();
    </code>

 */
#define IO_RG3_SetDigitalOutput() _TRISG3 = 0
/**
  @Summary
    Sets the GPIO pin, RG6, high using LATG6.

  @Description
    Sets the GPIO pin, RG6, high using LATG6.

  @Preconditions
    The RG6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RG6 high (1)
    IO_RG6_SetHigh();
    </code>

 */
#define IO_RG6_SetHigh()          _LATG6 = 1
/**
  @Summary
    Sets the GPIO pin, RG6, low using LATG6.

  @Description
    Sets the GPIO pin, RG6, low using LATG6.

  @Preconditions
    The RG6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Set RG6 low (0)
    IO_RG6_SetLow();
    </code>

 */
#define IO_RG6_SetLow()           _LATG6 = 0
/**
  @Summary
    Toggles the GPIO pin, RG6, using LATG6.

  @Description
    Toggles the GPIO pin, RG6, using LATG6.

  @Preconditions
    The RG6 must be set to an output.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Toggle RG6
    IO_RG6_SetToggle();
    </code>

 */
#define IO_RG6_Toggle()           _LATG6 ^= 1
/**
  @Summary
    Reads the value of the GPIO pin, RG6.

  @Description
    Reads the value of the GPIO pin, RG6.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    uint16_t portValue;

    // Read RG6
    postValue = IO_RG6_GetValue();
    </code>

 */
#define IO_RG6_GetValue()         _RG6
/**
  @Summary
    Configures the GPIO pin, RG6, as an input.

  @Description
    Configures the GPIO pin, RG6, as an input.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RG6 as an input
    IO_RG6_SetDigitalInput();
    </code>

 */
#define IO_RG6_SetDigitalInput()  _TRISG6 = 1
/**
  @Summary
    Configures the GPIO pin, RG6, as an output.

  @Description
    Configures the GPIO pin, RG6, as an output.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    // Sets the RG6 as an output
    IO_RG6_SetDigitalOutput();
    </code>

 */
#define IO_RG6_SetDigitalOutput() _TRISG6 = 0

/**
    Section: Function Prototypes
 */
/**
  @Summary
    Configures the pin settings of the PIC24FJ256GA106
    The peripheral pin select, PPS, configuration is also handled by this manager.

  @Description
    This is the generated manager file for the MPLAB� Code Configurator device.  This manager
    configures the pins direction, initial state, analog setting.
    The peripheral pin select, PPS, configuration is also handled by this manager.

  @Preconditions
    None.

  @Returns
    None.

  @Param
    None.

  @Example
    <code>
    void SYSTEM_Initialize(void)
    {
        // Other initializers are called from this function
        PIN_MANAGER_Initialize();
    }
    </code>

 */
void PIN_MANAGER_Initialize(void);

#endif