Contents of the disk:

Info.txt		This file, information about the contents of the disk.

750_307\750-307.eds	standard EDS file for the 750-307 CANopen buscoupler
750_307\750-307.dib	Bitmap
750_307\750-307.bmp	Bitmap for NetCon

750_337\750-337.eds	standard EDS file for the 750-337 and 750-337/000-100 CANopen buscoupler
750_337\750-337.dib	Bitmap for NetCon
750_337\750-337.bmp	Bitmap for NetCon
750_337\750-337_d.dib	Bitmap for NetCon
750_337\750-337_r.dib	Bitmap for NetCon
750_337\750-337_s.dib	Bitmap for NetCon

750_347\750-347.eds	standard EDS file for the 750-347
750_347\750-347.dib	Bitmap for NetCon
750_347\750-347.bmp	Bitmap for NetCon
750_347\750-347_d.dib	Bitmap for NetCon
750_347\750-347_r.dib	Bitmap for NetCon
750_347\750-347_s.dib	Bitmap for NetCon

750_348\750-348.eds	standard EDS file for the 750-348
750_348\750-348.dib	Bitmap for NetCon
750_348\750-348.bmp	Bitmap for NetCon
750_348\750-348_d.dib	Bitmap for NetCon
750_348\750-348_r.dib	Bitmap for NetCon
750_348\750-348_s.dib	Bitmap for NetCon

750_837\750-837.eds	standard EDS file for the 750-837 CANopen buscoupler
750_837\750-837.dib	Bitmap for NetCon
750_837\750-837.bmp	Bitmap for NetCon
750_837\750-837_d.dib	Bitmap for NetCon
750_837\750-837_r.dib	Bitmap for NetCon
750_837\750-837_s.dib	Bitmap for NetCon

752_327\750-327.eds 	standard EDS file for the 752-327 CANopen module
752_327\750-327.bmp 	Bitmap
752_327\750-327_d.dib 	Bitmap for NetCon
752_327\750-327_r.dib 	Bitmap for NetCon
752_327\750-327_s.dib 	Bitmap for NetCon

NetCon\     		example EDS Files for the NetCon and SyCon



For configuring the CANopen bus coupler 750-307; 750-337; 750-347; 750-348; 
750-337/000-100; 750-837 with a Configuration Tool, the tool has to know 
about the implemented object dictionary.

The EDS-File consist of all objects the bus coupler could have implemented.
The amount of implemented objects depends on the amount of connected modules.
In the Eds-Fie are the maximum number of objects. 

Attention: Not to every object in the EDS-file belongs to a module. 
Mapping of such objects returns an error message from the bus coupler.

Pay attention to map only such objects, which are available 
and represented by modules.


Example:
The following modules are connected to the bus coupler 750-307:
  750-307   CANopen bus coupler
  750-550   2-Channel analog output  0-10V
	750-400		2-Channel digital input module
	750-400		2-Channel digital input module
	750-400		2-Channel digital input module
	750-400		2-Channel digital input module
	750-600		end module

The two channels of the analog output module are available 
at Index 2500, SubIndex 1 and 2. SubIndex 0 has the value 2, 
that means that 2 SubIndexs are valid.

The value in SubIndex 0 of Index 2500 in the EDS File is 128. That 
means 128 channels are available maximum. This is the case,
 if 64 x "2-Channel analog output  0-10V modules" are connected 
at the buscoupler.

If you map Index 2500 Subindex 3 (refer to the EDS-File) in our example, then there is no module connected for this SubIndex. The bus coupler returns an error (abort SDO tranfer).

As well it is not possible to write data  to Index 2500 SubIndex 3.
