;============================================================================
;    Device description file according to DIN 19245 Part 3 (PROFIBUS-DP)
;============================================================================
;
; FILENAME        : WAGOB760.GSD
;----------------------------------------------------------------------------
; DEVICENAME      : Binary I/O Module PROFIBUS-DP 12MBaud
;----------------------------------------------------------------------------
; DEVICEFAMILY    : WAGO->I/O->SYSTEM 752
;----------------------------------------------------------------------------
; PROTOCOL        : PROFIBUS-DP (Slave)
;----------------------------------------------------------------------------
; VENDOR          : WAGO Kontakttechnik GmbH
;                   Hansastrasse 27
;                   D-32423 Minden/Westf.
;                   Germany
;                   Phone: +49 (0) 571 / 887-0
;                   Fax  : +49 (0) 571 / 887-169
;----------------------------------------------------------------------------
; ORDER-NO        : 755-323 (/...-...)
;----------------------------------------------------------------------------
; CONTACT         : Mr. Detlef Brand
;                   Phone: +49 (0) 571 / 887-473
;                   Fax  : +49 (0) 571 / 887-8473
;----------------------------------------------------------------------------
; FILE VERSION    : 1.20
;----------------------------------------------------------------------------
; DATE            : 2002-03-01
;----------------------------------------------------------------------------
; MODIFICATIONS   :
; V1.0  1999-10-31  1st official revision
; V1.1  2000-10-31  Upgrade from GSD-Revision 1 to 2 according to 
;                   PNO-Testspecification 02.2000
; V1.2  2002-03-01  Syntax modifications
;
;============================================================================
#Profibus_DP
PrmText = 1
Text(0) = "10 ms"
Text(1) = " 1 ms"
EndPrmText
ExtUserPrmData = 1 "Watchdog-Base"
Bit(2) 0 0-1
Prm_Text_Ref = 1
EndExtUserPrmData
GSD_Revision               = 2
Vendor_Name                = "WAGO Kontakttechnik GmbH"
Model_Name                 = "WAGO 752"
Revision                   = "1.00"
Ident_Number               = 0xB760
Protocol_Ident             = 0
Station_Type               = 0
FMS_supp                   = 0
Hardware_Release           = "HW 01"
Software_Release           = "---"
9.6_supp                   = 1
19.2_supp                  = 1
93.75_supp                 = 1
187.5_supp                 = 1
500_supp                   = 1
1.5M_supp                  = 1
3M_supp                    = 1
6M_supp                    = 1
12M_supp                   = 1
MaxTsdr_9.6                = 60
MaxTsdr_19.2               = 60
MaxTsdr_93.75              = 60
MaxTsdr_187.5              = 60
MaxTsdr_500                = 100
MaxTsdr_1.5M               = 150
MaxTsdr_3M                 = 250
MaxTsdr_6M                 = 450
MaxTsdr_12M                = 800
Redundancy                 = 0
Repeater_Ctrl_Sig          = 0
24V_Pins                   = 0
Implementation_Type        = "LSPM2-ASIC STEP B"
Bitmap_Device              = "WAGO752N"
Bitmap_Diag                = "WAGO752S"
Freeze_Mode_supp           = 1
Sync_Mode_supp             = 1
Auto_Baud_supp             = 1
Set_Slave_Add_supp         = 1
Min_Slave_Intervall        = 1
Modular_Station            = 0
Modul_Offset               = 0
User_Prm_Data_Len          = 5
User_Prm_Data              = 0x00 , 0x00 , 0x00 , 0x00 , 0x00
Max_User_Prm_Data_Len      = 5
Fail_Safe                  = 0
Slave_Family               = 3@WAGO-IO-SYSTEM@BINARY
Max_Diag_Data_Len          = 13
Ext_User_Prm_Data_Const(0) = 0x00 , 0x00 , 0x00 , 0x00 , 0x00
Ext_User_Prm_Data_Ref(1)   = 1
Module = "752-323  16I/16Q"  0x21 , 0x11
1
Ext_Module_Prm_Data_Len = 0
EndModule
Unit_Diag_Bit (0x0000) = "Failure Output-Group 1"
Unit_Diag_Bit (0x0001) = "Failure Output-Group 2"
Unit_Diag_Bit (0x0002) = "Failure Output-Group 3"
Unit_Diag_Bit (0x0003) = "Failure Output-Group 4"