# Simplified Chinese translation of GNU Wget # Copyright (C) 2003, 2009, 2011 Free Software Foundation, Inc. # This file is distributed under the same license as the wget package. # Rongjun Mu , 2003. # Liu Songhe , 2003. # Zong Yaotang , 2003. # Ji ZhengYu , 2009, 2010. # Anthony Fok , 2010, 2011. # msgid "" msgstr "" "Project-Id-Version: wget 1.12-pre7\n" "Report-Msgid-Bugs-To: bug-wget@gnu.org\n" "POT-Creation-Date: 2014-10-27 09:59+0100\n" "PO-Revision-Date: 2011-10-28 13:04+0800\n" "Last-Translator: Anthony Fok \n" "Language-Team: Chinese (simplified) \n" "Language: zh_CN\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=1; plural=0;\n" #: lib/error.c:188 msgid "Unknown system error" msgstr "未知的系统错误" #: lib/gai_strerror.c:57 #, fuzzy msgid "Address family for hostname not supported" msgstr "不支持 IPv6 地址" #: lib/gai_strerror.c:58 src/host.c:365 msgid "Temporary failure in name resolution" msgstr "名字解析时有临时错误" #: lib/gai_strerror.c:59 msgid "Bad value for ai_flags" msgstr "" #: lib/gai_strerror.c:60 #, fuzzy msgid "Non-recoverable failure in name resolution" msgstr "名字解析时有临时错误" #: lib/gai_strerror.c:61 msgid "ai_family not supported" msgstr "" #: lib/gai_strerror.c:62 msgid "Memory allocation failure" msgstr "" #: lib/gai_strerror.c:63 msgid "No address associated with hostname" msgstr "" #: lib/gai_strerror.c:64 msgid "Name or service not known" msgstr "" #: lib/gai_strerror.c:65 msgid "Servname not supported for ai_socktype" msgstr "" #: lib/gai_strerror.c:66 #, fuzzy msgid "ai_socktype not supported" msgstr "不支持 IPv6 地址" #: lib/gai_strerror.c:67 #, fuzzy msgid "System error" msgstr "未知的系统错误" #: lib/gai_strerror.c:68 msgid "Argument buffer too small" msgstr "" #: lib/gai_strerror.c:70 msgid "Processing request in progress" msgstr "" #: lib/gai_strerror.c:71 msgid "Request canceled" msgstr "" #: lib/gai_strerror.c:72 msgid "Request not canceled" msgstr "" #: lib/gai_strerror.c:73 msgid "All requests done" msgstr "" #: lib/gai_strerror.c:74 msgid "Interrupted by a signal" msgstr "" #: lib/gai_strerror.c:75 msgid "Parameter string not correctly encoded" msgstr "" #: lib/gai_strerror.c:87 src/host.c:367 msgid "Unknown error" msgstr "未知的错误" #: lib/getopt.c:547 lib/getopt.c:576 #, fuzzy, c-format msgid "%s: option '%s' is ambiguous; possibilities:" msgstr "%s：选项“%s”不明确\n" #: lib/getopt.c:624 lib/getopt.c:628 #, c-format msgid "%s: option '--%s' doesn't allow an argument\n" msgstr "%s：选项“--%s”不允许有参数\n" #: lib/getopt.c:637 lib/getopt.c:642 #, c-format msgid "%s: option '%c%s' doesn't allow an argument\n" msgstr "%s：选项“%c%s”不允许有参数\n" #: lib/getopt.c:685 lib/getopt.c:704 #, c-format msgid "%s: option '--%s' requires an argument\n" msgstr "%s：选项“%s”需要参数\n" #: lib/getopt.c:742 lib/getopt.c:745 #, c-format msgid "%s: unrecognized option '--%s'\n" msgstr "%s：无法识别的选项“--%s”\n" #: lib/getopt.c:753 lib/getopt.c:756 #, c-format msgid "%s: unrecognized option '%c%s'\n" msgstr "%s：无法识别的选项“%c%s”\n" #: lib/getopt.c:805 lib/getopt.c:808 #, c-format msgid "%s: invalid option -- '%c'\n" msgstr "%s：无效选项 -- %c\n" #: lib/getopt.c:861 lib/getopt.c:878 lib/getopt.c:1088 lib/getopt.c:1106 #, c-format msgid "%s: option requires an argument -- '%c'\n" msgstr "%s：选项需要参数 -- %c\n" #: lib/getopt.c:934 lib/getopt.c:950 #, c-format msgid "%s: option '-W %s' is ambiguous\n" msgstr "%s：选项“-W %s”不明确\n" #: lib/getopt.c:974 lib/getopt.c:992 #, c-format msgid "%s: option '-W %s' doesn't allow an argument\n" msgstr "%s：选项“-W %s”不允许有参数\n" #: lib/getopt.c:1013 lib/getopt.c:1031 #, c-format msgid "%s: option '-W %s' requires an argument\n" msgstr "%s：选项“%s”需要参数\n" #. TRANSLATORS: #. Get translations for open and closing quotation marks. #. The message catalog should translate "`" to a left #. quotation mark suitable for the locale, and similarly for #. "'". For example, a French Unicode local should translate #. these to U+00AB (LEFT-POINTING DOUBLE ANGLE #. QUOTATION MARK), and U+00BB (RIGHT-POINTING DOUBLE ANGLE #. QUOTATION MARK), respectively. #. #. If the catalog has no translation, we will try to #. use Unicode U+2018 (LEFT SINGLE QUOTATION MARK) and #. Unicode U+2019 (RIGHT SINGLE QUOTATION MARK). If the #. current locale is not Unicode, locale_quoting_style #. will quote 'like this', and clocale_quoting_style will #. quote "like this". You should always include translations #. for "`" and "'" even if U+2018 and U+2019 are appropriate #. for your locale. #. #. If you don't know what to put here, please see #. #. and use glyphs suitable for your language. #: lib/quotearg.c:312 msgid "`" msgstr "“" #: lib/quotearg.c:313 msgid "'" msgstr "”" #: lib/regcomp.c:131 msgid "Success" msgstr "" #: lib/regcomp.c:134 msgid "No match" msgstr "" #: lib/regcomp.c:137 msgid "Invalid regular expression" msgstr "" #: lib/regcomp.c:140 msgid "Invalid collation character" msgstr "" #: lib/regcomp.c:143 #, fuzzy msgid "Invalid character class name" msgstr "无效的主机名" #: lib/regcomp.c:146 msgid "Trailing backslash" msgstr "" #: lib/regcomp.c:149 #, fuzzy msgid "Invalid back reference" msgstr "无效的用户名" #: lib/regcomp.c:152 msgid "Unmatched [ or [^" msgstr "" #: lib/regcomp.c:155 msgid "Unmatched ( or \\(" msgstr "" #: lib/regcomp.c:158 msgid "Unmatched \\{" msgstr "" #: lib/regcomp.c:161 msgid "Invalid content of \\{\\}" msgstr "" #: lib/regcomp.c:164 #, fuzzy msgid "Invalid range end" msgstr "无效的用户名" #: lib/regcomp.c:167 #, fuzzy msgid "Memory exhausted" msgstr "内存耗尽" #: lib/regcomp.c:170 msgid "Invalid preceding regular expression" msgstr "" #: lib/regcomp.c:173 msgid "Premature end of regular expression" msgstr "" #: lib/regcomp.c:176 msgid "Regular expression too big" msgstr "" #: lib/regcomp.c:179 msgid "Unmatched ) or \\)" msgstr "" #: lib/regcomp.c:707 msgid "No previous regular expression" msgstr "" #: lib/spawn-pipe.c:135 lib/spawn-pipe.c:138 lib/spawn-pipe.c:259 #: lib/spawn-pipe.c:262 #, c-format msgid "cannot create pipe" msgstr "" #: lib/spawn-pipe.c:229 lib/spawn-pipe.c:343 lib/wait-process.c:282 #: lib/wait-process.c:356 #, c-format msgid "%s subprocess failed" msgstr "" #: lib/w32spawn.h:43 #, c-format msgid "_open_osfhandle failed" msgstr "" #: lib/w32spawn.h:84 #, c-format msgid "cannot restore fd %d: dup2 failed" msgstr "" #: lib/wait-process.c:223 lib/wait-process.c:255 lib/wait-process.c:317 #, c-format msgid "%s subprocess" msgstr "" #: lib/wait-process.c:274 lib/wait-process.c:346 #, c-format msgid "%s subprocess got fatal signal %d" msgstr "" #: lib/xalloc-die.c:34 msgid "memory exhausted" msgstr "内存耗尽" #: src/connect.c:200 #, c-format msgid "%s: unable to resolve bind address %s; disabling bind.\n" msgstr "%s: 无法解析 bind 地址 %s；禁用 bind。\n" #: src/connect.c:284 #, c-format msgid "Connecting to %s|%s|:%d... " msgstr "正在连接 %s|%s|:%d... " #: src/connect.c:293 #, c-format msgid "Connecting to %s:%d... " msgstr "正在连接 %s:%d... " #: src/connect.c:296 #, fuzzy, c-format msgid "Connecting to [%s]:%d... " msgstr "正在连接 %s:%d... " #: src/connect.c:358 msgid "connected.\n" msgstr "已连接。\n" #: src/connect.c:370 src/host.c:783 src/host.c:812 #, c-format msgid "failed: %s.\n" msgstr "失败：%s。\n" #: src/connect.c:394 src/http.c:1990 #, c-format msgid "%s: unable to resolve host address %s\n" msgstr "%s: 无法解析主机地址 %s\n" #: src/convert.c:196 #, c-format msgid "Converted %d files in %s seconds.\n" msgstr "已转换了 %d 个文件，用时 %s 秒。\n" #: src/convert.c:224 #, c-format msgid "Converting %s... " msgstr "正在转换 %s... " #: src/convert.c:237 msgid "nothing to do.\n" msgstr "不需进行任何操作。\n" #: src/convert.c:245 src/convert.c:269 #, c-format msgid "Cannot convert links in %s: %s\n" msgstr "无法转换 %s 中的链接：%s\n" #: src/convert.c:260 #, c-format msgid "Unable to delete %s: %s\n" msgstr "无法删除 %s: %s\n" #: src/convert.c:476 #, c-format msgid "Cannot back up %s as %s: %s\n" msgstr "无法将 %s 备份成 %s: %s\n" #: src/cookies.c:450 #, c-format msgid "Syntax error in Set-Cookie: %s at position %d.\n" msgstr "在 Set-Cookie 中出现语法错误：%s 在位置 %d 处。\n" #: src/cookies.c:732 #, fuzzy, c-format msgid "Cookie coming from %s attempted to set domain to " msgstr "来自 %s 的 Cookie 尝试将域设置为 %s\n" #: src/cookies.c:735 src/spider.c:92 #, c-format msgid "%s\n" msgstr "%s\n" #: src/cookies.c:1183 src/cookies.c:1304 #, c-format msgid "Cannot open cookies file %s: %s\n" msgstr "无法打开 cookie 文件 %s: %s\n" #: src/cookies.c:1341 #, c-format msgid "Error writing to %s: %s\n" msgstr "写入 %s 时发生错误: %s\n" #: src/cookies.c:1344 #, c-format msgid "Error closing %s: %s\n" msgstr "关闭 %s 时发生错误: %s\n" #: src/ftp-ls.c:1049 msgid "Unsupported listing type, trying Unix listing parser.\n" msgstr "不支持的文件列表类型，试用 Unix 格式的列表来分析。\n" #: src/ftp-ls.c:1100 src/ftp-ls.c:1102 #, c-format msgid "Index of /%s on %s:%d" msgstr "/%s 的索引，在 %s:%d" #: src/ftp-ls.c:1127 #, c-format msgid "time unknown " msgstr "未知的时间 " #: src/ftp-ls.c:1131 #, c-format msgid "File " msgstr "文件 " #: src/ftp-ls.c:1134 #, c-format msgid "Directory " msgstr "目录 " #: src/ftp-ls.c:1137 #, c-format msgid "Link " msgstr "链接 " #: src/ftp-ls.c:1140 #, c-format msgid "Not sure " msgstr "不确定 " #: src/ftp-ls.c:1163 #, c-format msgid " (%s bytes)" msgstr " (%s 字节)" #: src/ftp.c:222 #, c-format msgid "Length: %s" msgstr "长度：%s" #: src/ftp.c:228 src/http.c:2810 #, c-format msgid ", %s (%s) remaining" msgstr "，剩余 %s (%s)" #: src/ftp.c:232 src/http.c:2814 #, c-format msgid ", %s remaining" msgstr "，剩余 %s" #: src/ftp.c:235 msgid " (unauthoritative)\n" msgstr " (非正式数据)\n" #: src/ftp.c:313 #, c-format msgid "Logging in as %s ... " msgstr "正在以 %s 登录 ... " #: src/ftp.c:332 src/ftp.c:378 src/ftp.c:445 src/ftp.c:510 src/ftp.c:740 #: src/ftp.c:793 src/ftp.c:840 src/ftp.c:897 src/ftp.c:958 src/ftp.c:1049 #: src/ftp.c:1099 msgid "Error in server response, closing control connection.\n" msgstr "服务器响应时发生错误，正在关闭控制连接。\n" #: src/ftp.c:339 msgid "Error in server greeting.\n" msgstr "服务器消息出现错误。\n" #: src/ftp.c:346 src/ftp.c:518 src/ftp.c:748 src/ftp.c:848 src/ftp.c:907 #: src/ftp.c:968 src/ftp.c:1059 src/ftp.c:1109 msgid "Write failed, closing control connection.\n" msgstr "写入失败，正在关闭控制连接。\n" #: src/ftp.c:352 msgid "The server refuses login.\n" msgstr "服务器拒绝登录。\n" #: src/ftp.c:358 msgid "Login incorrect.\n" msgstr "登录不正确。\n" #: src/ftp.c:364 msgid "Logged in!\n" msgstr "登录成功！\n" #: src/ftp.c:386 msgid "Server error, can't determine system type.\n" msgstr "服务器错误，无法确定操作系统的类型。\n" #: src/ftp.c:395 src/ftp.c:884 src/ftp.c:941 src/ftp.c:984 msgid "done. " msgstr "完成。 " #: src/ftp.c:498 src/ftp.c:765 src/ftp.c:810 src/ftp.c:1079 src/ftp.c:1128 msgid "done.\n" msgstr "完成。\n" #: src/ftp.c:525 #, c-format msgid "Unknown type `%c', closing control connection.\n" msgstr "未知的类别“%c”，正在关闭控制连接。\n" #: src/ftp.c:537 msgid "done. " msgstr "完成。 " #: src/ftp.c:543 msgid "==> CWD not needed.\n" msgstr "==> 不需要 CWD。\n" #: src/ftp.c:754 #, c-format msgid "" "No such directory %s.\n" "\n" msgstr "" "目录 %s 不存在。\n" "\n" #: src/ftp.c:775 msgid "==> CWD not required.\n" msgstr "==> 不需要 CWD。\n" #: src/ftp.c:818 msgid "File has already been retrieved.\n" msgstr "该文件已经被获取了。\n" #: src/ftp.c:854 msgid "Cannot initiate PASV transfer.\n" msgstr "无法启动 PASV 传输。\n" #: src/ftp.c:858 msgid "Cannot parse PASV response.\n" msgstr "无法解析 PASV 响应内容。\n" #: src/ftp.c:875 #, c-format msgid "couldn't connect to %s port %d: %s\n" msgstr "无法连接到 %s 端口号 %d: %s\n" #: src/ftp.c:923 #, c-format msgid "Bind error (%s).\n" msgstr "Bind 错误 (%s)。\n" #: src/ftp.c:929 msgid "Invalid PORT.\n" msgstr "PORT 命令无效。\n" #: src/ftp.c:975 msgid "" "\n" "REST failed, starting from scratch.\n" msgstr "" "\n" "断点续传 (REST) 失败，重头开始下载。\n" #: src/ftp.c:1015 #, c-format msgid "File %s exists.\n" msgstr "文件 %s 已存在。\n" #: src/ftp.c:1021 #, c-format msgid "No such file %s.\n" msgstr "文件 %s 不存在。\n" #: src/ftp.c:1067 #, c-format msgid "" "No such file %s.\n" "\n" msgstr "" "文件 %s 不存在。\n" "\n" #: src/ftp.c:1117 #, c-format msgid "" "No such file or directory %s.\n" "\n" msgstr "" "文件或目录 %s 不存在。\n" "\n" #: src/ftp.c:1276 src/http.c:2940 #, c-format msgid "%s has sprung into existence.\n" msgstr "%s 突然出现。\n" #: src/ftp.c:1328 #, c-format msgid "%s: %s, closing control connection.\n" msgstr "%s：%s，正在关闭控制连接。\n" #: src/ftp.c:1340 #, c-format msgid "%s (%s) - Data connection: %s; " msgstr "%s (%s) - 数据连接：%s；" #: src/ftp.c:1356 msgid "Control connection closed.\n" msgstr "已关闭控制连接。\n" #: src/ftp.c:1374 msgid "Data transfer aborted.\n" msgstr "数据传输已被中止。\n" #: src/ftp.c:1580 #, c-format msgid "File %s already there; not retrieving.\n" msgstr "文件 %s 已存在；不获取。\n" #: src/ftp.c:1663 src/http.c:3107 #, c-format msgid "(try:%2d)" msgstr "(尝试次数：%2d)" #: src/ftp.c:1745 src/http.c:3493 #, c-format msgid "" "%s (%s) - written to stdout %s[%s]\n" "\n" msgstr "" "%s (%s) - 已写入标准输出 %s[%s]\n" "\n" #: src/ftp.c:1746 src/http.c:3494 #, c-format msgid "" "%s (%s) - %s saved [%s]\n" "\n" msgstr "" "%s (%s) - %s 已保存 [%s]\n" "\n" #: src/ftp.c:1804 src/main.c:1670 src/recur.c:433 src/recur.c:650 #: src/retr.c:1102 #, c-format msgid "Removing %s.\n" msgstr "正在删除 %s。\n" #: src/ftp.c:1850 #, c-format msgid "Using %s as listing tmp file.\n" msgstr "使用 %s 作为列表临时文件。\n" #: src/ftp.c:1867 #, c-format msgid "Removed %s.\n" msgstr "已删除 %s。\n" #: src/ftp.c:1904 #, c-format msgid "Recursion depth %d exceeded max. depth %d.\n" msgstr "链接递归深度 %d 超过最大值 %d。\n" #: src/ftp.c:1974 #, c-format msgid "Remote file no newer than local file %s -- not retrieving.\n" msgstr "远程文件比本地文件 %s 更老 -- 不获取。\n" #: src/ftp.c:1981 #, c-format msgid "" "Remote file is newer than local file %s -- retrieving.\n" "\n" msgstr "远程文件较本地文件 %s 新 -- 获取。\n" #: src/ftp.c:1988 #, c-format msgid "" "The sizes do not match (local %s) -- retrieving.\n" "\n" msgstr "" "文件大小不符 (本地文件 %s) -- 获取。\n" "\n" #: src/ftp.c:2006 msgid "Invalid name of the symlink, skipping.\n" msgstr "无效的符号连接名，跳过。\n" #: src/ftp.c:2023 #, c-format msgid "" "Already have correct symlink %s -> %s\n" "\n" msgstr "" "已经存在正确的符号连接 %s -> %s\n" "\n" #: src/ftp.c:2032 #, c-format msgid "Creating symlink %s -> %s\n" msgstr "正在创建符号链接 %s -> %s\n" #: src/ftp.c:2042 #, c-format msgid "Symlinks not supported, skipping symlink %s.\n" msgstr "不支持符号连接，正在跳过符号连接 %s。\n" #: src/ftp.c:2054 #, c-format msgid "Skipping directory %s.\n" msgstr "正在跳过目录 %s。\n" #: src/ftp.c:2063 #, c-format msgid "%s: unknown/unsupported file type.\n" msgstr "%s：未知的/不支持的文件类型。\n" #: src/ftp.c:2103 #, c-format msgid "%s: corrupt time-stamp.\n" msgstr "%s：错误的时间戳标记。\n" #: src/ftp.c:2127 #, c-format msgid "Will not retrieve dirs since depth is %d (max %d).\n" msgstr "因为目录深度为 %d (最大值为 %d)，所以不获取目录。\n" #: src/ftp.c:2177 #, c-format msgid "Not descending to %s as it is excluded/not-included.\n" msgstr "不进入 %s 目录因为其已被排除或未被包含进来。\n" #: src/ftp.c:2266 src/ftp.c:2280 #, c-format msgid "Rejecting %s.\n" msgstr "拒绝 %s。\n" #: src/ftp.c:2303 #, c-format msgid "Error matching %s against %s: %s\n" msgstr "%s 和 %s 匹配错误: %s\n" #: src/ftp.c:2359 #, c-format msgid "No matches on pattern %s.\n" msgstr "没有与模式 %s 相符合的。\n" #: src/ftp.c:2430 #, c-format msgid "Wrote HTML-ized index to %s [%s].\n" msgstr "已经将 HTML 格式的索引写入到 %s [%s]。\n" #: src/ftp.c:2435 #, c-format msgid "Wrote HTML-ized index to %s.\n" msgstr "已经将 HTML 格式的索引写入到 %s。\n" #: src/gnutls.c:110 #, c-format msgid "ERROR: Cannot open directory %s.\n" msgstr "错误：无法打开目录 %s。\n" #: src/gnutls.c:141 #, fuzzy, c-format msgid "ERROR: Failed to open cert %s: (%d).\n" msgstr "错误：无法打开目录 %s。\n" #: src/gnutls.c:173 msgid "ERROR: GnuTLS requires the key and the cert to be of the same type.\n" msgstr "" #: src/gnutls.c:589 src/openssl.c:599 msgid "ERROR" msgstr "错误" #: src/gnutls.c:589 src/openssl.c:599 msgid "WARNING" msgstr "警告" #: src/gnutls.c:595 src/openssl.c:608 #, c-format msgid "%s: No certificate presented by %s.\n" msgstr "%s: %s 未提出证书。\n" #: src/gnutls.c:601 #, c-format msgid "%s: The certificate of %s is not trusted.\n" msgstr "%s: %s 的证书不可信。\n" #: src/gnutls.c:602 #, c-format msgid "%s: The certificate of %s hasn't got a known issuer.\n" msgstr "%s: %s 的证书颁发者未知。\n" #: src/gnutls.c:603 #, c-format msgid "%s: The certificate of %s has been revoked.\n" msgstr "%s: %s 的证书已经过期。\n" #: src/gnutls.c:604 #, fuzzy, c-format msgid "%s: The certificate signer of %s was not a CA.\n" msgstr "%s: %s 的证书不可信。\n" #: src/gnutls.c:605 #, fuzzy, c-format msgid "%s: The certificate of %s was signed using an insecure algorithm.\n" msgstr "%s: %s 的证书颁发者未知。\n" #: src/gnutls.c:606 #, fuzzy, c-format msgid "%s: The certificate of %s is not yet activated.\n" msgstr "%s: %s 的证书不可信。\n" #: src/gnutls.c:607 #, fuzzy, c-format msgid "%s: The certificate of %s has expired.\n" msgstr "%s: %s 的证书已经过期。\n" #: src/gnutls.c:618 #, c-format msgid "Error initializing X509 certificate: %s\n" msgstr "初始化 X509 证书错误: %s\n" #: src/gnutls.c:627 msgid "No certificate found\n" msgstr "未找到证书\n" #: src/gnutls.c:634 #, c-format msgid "Error parsing certificate: %s\n" msgstr "解析证书时发生错误: %s。\n" #: src/gnutls.c:641 msgid "The certificate has not yet been activated\n" msgstr "证书还未激活\n" #: src/gnutls.c:646 msgid "The certificate has expired\n" msgstr "证书已经过期\n" #: src/gnutls.c:652 #, c-format msgid "The certificate's owner does not match hostname %s\n" msgstr "证书所有者与主机名 %s 不符\n" #: src/gnutls.c:661 msgid "Certificate must be X.509\n" msgstr "" #: src/host.c:361 msgid "Unknown host" msgstr "未知的主机" #: src/host.c:740 #, c-format msgid "Resolving %s... " msgstr "正在解析主机 %s... " #: src/host.c:792 msgid "failed: No IPv4/IPv6 addresses for host.\n" msgstr "失败：主机没有 IPv4/IPv6 地址。\n" #: src/host.c:815 msgid "failed: timed out.\n" msgstr "失败：超时。\n" #: src/html-url.c:303 #, c-format msgid "%s: Cannot resolve incomplete link %s.\n" msgstr "%s：无法解析不完整的链接 %s。\n" #: src/html-url.c:836 #, c-format msgid "%s: Invalid URL %s: %s\n" msgstr "%s：无效的 URL %s: %s\n" #: src/http.c:371 #, c-format msgid "Failed writing HTTP request: %s.\n" msgstr "无法写入 HTTP 请求：%s。\n" #: src/http.c:767 msgid "No headers, assuming HTTP/0.9" msgstr "没有 HTTP 头，尝试 HTTP/0.9" #: src/http.c:1495 #, c-format msgid "" "File %s already there; not retrieving.\n" "\n" msgstr "" "文件 %s 已经存在；不获取。\n" "\n" #: src/http.c:1747 msgid "Disabling SSL due to encountered errors.\n" msgstr "由于遭遇错误，将禁用 SSL。\n" #: src/http.c:1869 #, fuzzy, c-format msgid "BODY data file %s missing: %s\n" msgstr "缺少 POST 数据文件 %s : %s\n" #: src/http.c:1971 #, fuzzy, c-format msgid "Reusing existing connection to [%s]:%d.\n" msgstr "再次使用存在的到 %s:%d 的连接。\n" #: src/http.c:1976 #, c-format msgid "Reusing existing connection to %s:%d.\n" msgstr "再次使用存在的到 %s:%d 的连接。\n" #: src/http.c:2048 #, c-format msgid "Failed reading proxy response: %s\n" msgstr "无法读取代理响应：%s\n" #: src/http.c:2068 src/http.c:2235 src/http.c:3287 #, c-format msgid "%s ERROR %d: %s.\n" msgstr "%s 错误 %d：%s。\n" #: src/http.c:2070 src/http.c:2237 src/http.c:2572 msgid "Malformed status line" msgstr "不正常的状态行" #: src/http.c:2081 #, c-format msgid "Proxy tunneling failed: %s" msgstr "代理渠道错误: %s" #: src/http.c:2175 #, c-format msgid "%s request sent, awaiting response... " msgstr "已发出 %s 请求，正在等待回应... " #: src/http.c:2210 msgid "No data received.\n" msgstr "没有接收到数据。\n" #: src/http.c:2217 #, c-format msgid "Read error (%s) in headers.\n" msgstr "读取文件头错误 (%s)。\n" #: src/http.c:2389 msgid "Unknown authentication scheme.\n" msgstr "未知的验证方式。\n" #: src/http.c:2574 msgid "(no description)" msgstr "(没有描述)" #: src/http.c:2650 #, c-format msgid "Location: %s%s\n" msgstr "位置：%s%s\n" #: src/http.c:2651 src/http.c:2820 msgid "unspecified" msgstr "未指定" #: src/http.c:2652 msgid " [following]" msgstr " [跟随至新的 URL]" #: src/http.c:2765 msgid "" "\n" " The file is already fully retrieved; nothing to do.\n" "\n" msgstr "" "\n" " 文件已下载完成；不会进行任何操作。\n" "\n" #: src/http.c:2800 msgid "Length: " msgstr "长度：" #: src/http.c:2820 msgid "ignored" msgstr "已忽略" #: src/http.c:2961 #, c-format msgid "Saving to: %s\n" msgstr "正在保存至: %s\n" #: src/http.c:3031 msgid "Warning: wildcards not supported in HTTP.\n" msgstr "警告：HTTP 不支持通配符。\n" #: src/http.c:3096 msgid "Spider mode enabled. Check if remote file exists.\n" msgstr "开启 Spider 模式。检查是否存在远程文件。\n" #: src/http.c:3185 #, c-format msgid "Cannot write to %s (%s).\n" msgstr "无法写入 %s (%s)。\n" #: src/http.c:3196 msgid "Required attribute missing from Header received.\n" msgstr "" #: src/http.c:3201 msgid "Username/Password Authentication Failed.\n" msgstr "" #: src/http.c:3207 #, fuzzy msgid "Cannot write to WARC file.\n" msgstr "无法写入 %s (%s)。\n" #: src/http.c:3213 #, fuzzy msgid "Cannot write to temporary WARC file.\n" msgstr "无法写入 %s (%s)。\n" #: src/http.c:3218 msgid "Unable to establish SSL connection.\n" msgstr "无法建立 SSL 连接。\n" #: src/http.c:3224 #, fuzzy, c-format msgid "Cannot unlink %s (%s).\n" msgstr "无法写入 %s (%s)。\n" #: src/http.c:3234 #, c-format msgid "ERROR: Redirection (%d) without location.\n" msgstr "错误：重定向 (%d) 但没有指定位置。\n" #: src/http.c:3282 msgid "Remote file does not exist -- broken link!!!\n" msgstr "远程文件不存在 -- 链接失效！！！\n" #: src/http.c:3304 msgid "Last-modified header missing -- time-stamps turned off.\n" msgstr "缺少“Last-modified”文件头 -- 关闭时间戳标记。\n" #: src/http.c:3312 msgid "Last-modified header invalid -- time-stamp ignored.\n" msgstr "无效的“Last-modified”文件头 -- 忽略时间戳标记。\n" #: src/http.c:3342 #, c-format msgid "" "Server file no newer than local file %s -- not retrieving.\n" "\n" msgstr "" "远程文件比本地文件 %s 更老 -- 不获取。\n" "\n" #: src/http.c:3350 #, c-format msgid "The sizes do not match (local %s) -- retrieving.\n" msgstr "文件大小不符 (本地文件 %s) -- 获取。\n" #: src/http.c:3359 msgid "Remote file is newer, retrieving.\n" msgstr "远程文件较新，获取。\n" #: src/http.c:3377 msgid "" "Remote file exists and could contain links to other resources -- " "retrieving.\n" "\n" msgstr "" "存在远程文件且可能含有到其它资源的链接 -- 获取。\n" "\n" #: src/http.c:3383 msgid "" "Remote file exists but does not contain any link -- not retrieving.\n" "\n" msgstr "" "存在远程文件但不含任何链接 -- 无法获取。\n" "\n" #: src/http.c:3392 msgid "" "Remote file exists and could contain further links,\n" "but recursion is disabled -- not retrieving.\n" "\n" msgstr "" "存在远程文件且该文件可能含有更深层的链接，\n" "但不能进行递归操作 -- 无法获取。\n" "\n" #: src/http.c:3398 msgid "" "Remote file exists.\n" "\n" msgstr "" "存在远程文件。\n" "\n" #: src/http.c:3407 #, c-format msgid "%s URL: %s %2d %s\n" msgstr "%s URL: %s %2d %s\n" #: src/http.c:3457 #, c-format msgid "" "%s (%s) - written to stdout %s[%s/%s]\n" "\n" msgstr "" "%s (%s) - 已写入至标准输出 %s[%s/%s]\n" "\n" #: src/http.c:3458 #, c-format msgid "" "%s (%s) - %s saved [%s/%s]\n" "\n" msgstr "" "%s (%s) - 已保存 %s [%s/%s])\n" "\n" #: src/http.c:3519 #, c-format msgid "%s (%s) - Connection closed at byte %s. " msgstr "%s (%s) - 在 %s 字节处连接关闭。" #: src/http.c:3542 #, c-format msgid "%s (%s) - Read error at byte %s (%s)." msgstr "%s (%s) - 在 %s 字节处发生读取错误 (%s)。" #: src/http.c:3551 #, c-format msgid "%s (%s) - Read error at byte %s/%s (%s). " msgstr "%s (%s) - 在 %s/%s 字节处发生读取错误 (%s)。" #: src/http.c:3786 #, c-format msgid "Unsupported quality of protection '%s'.\n" msgstr "" #: src/http.c:3792 #, fuzzy, c-format msgid "Unsupported algorithm '%s'.\n" msgstr "不支持的协议类型 %s" #: src/init.c:500 #, c-format msgid "%s: WGETRC points to %s, which doesn't exist.\n" msgstr "%s: WGETRC指向 %s，但它并不存在。\n" #: src/init.c:605 src/netrc.c:246 #, c-format msgid "%s: Cannot read %s (%s).\n" msgstr "%s：无法读取 %s (%s)。\n" #: src/init.c:622 #, c-format msgid "%s: Error in %s at line %d.\n" msgstr "%1$s：错误发生于第 %3$d 行的 %2$s。\n" #: src/init.c:628 #, c-format msgid "%s: Syntax error in %s at line %d.\n" msgstr "%1$s: 第 %3$d 行的 %2$s 处发生语法错误。\n" #: src/init.c:633 #, c-format msgid "%s: Unknown command %s in %s at line %d.\n" msgstr "%1$s: 未知的命令 %2$s 在第 %4$d 行 %3$s 处。\n" #: src/init.c:670 #, c-format msgid "" "Parsing system wgetrc file (env SYSTEM_WGETRC) failed. Please check\n" "'%s',\n" "or specify a different file using --config.\n" msgstr "" #: src/init.c:685 #, c-format msgid "" "Parsing system wgetrc file failed. Please check\n" "'%s',\n" "or specify a different file using --config.\n" msgstr "" #: src/init.c:701 #, c-format msgid "%s: Warning: Both system and user wgetrc point to %s.\n" msgstr "%s：警告：系统与用户的 wgetrc 都指向 %s。\n" #: src/init.c:891 #, c-format msgid "%s: Invalid --execute command %s\n" msgstr "%s：无效的 --execute 命令 %s\n" #: src/init.c:936 #, c-format msgid "%s: %s: Invalid boolean %s; use `on' or `off'.\n" msgstr "%s：%s：无效的布尔值 %s；请使用“on”或“off”。\n" #: src/init.c:953 #, c-format msgid "%s: %s: Invalid number %s.\n" msgstr "%s：%s：无效数字 %s。\n" #: src/init.c:1175 src/init.c:1194 #, c-format msgid "%s: %s: Invalid byte value %s\n" msgstr "%s：%s：无效的字节数值 %s\n" #: src/init.c:1219 #, c-format msgid "%s: %s: Invalid time period %s\n" msgstr "%s：%s：无效的时间周期 %s\n" #: src/init.c:1273 src/init.c:1384 src/init.c:1440 src/init.c:1504 #: src/init.c:1523 src/init.c:1548 #, c-format msgid "%s: %s: Invalid value %s.\n" msgstr "%s：%s：无效的值 %s。\n" #: src/init.c:1310 #, c-format msgid "%s: %s: Invalid header %s.\n" msgstr "%s：%s：无效的文件头 %s。\n" #: src/init.c:1331 #, fuzzy, c-format msgid "%s: %s: Invalid WARC header %s.\n" msgstr "%s：%s：无效的文件头 %s。\n" #: src/init.c:1397 #, c-format msgid "%s: %s: Invalid progress type %s.\n" msgstr "%s：%s：无效的进度指示方式 %s。\n" #: src/init.c:1477 #, c-format msgid "" "%s: %s: Invalid restriction %s,\n" " use [unix|windows],[lowercase|uppercase],[nocontrol],[ascii].\n" msgstr "" "%s：%s：无效的限定项 %s，\n" " 请使用 [unix|windows]、[lowercase|uppercase]、[nocontrol] 或 [ascii]。\n" #: src/iri.c:101 #, c-format msgid "Encoding %s isn't valid\n" msgstr "编码 %s 无效\n" #: src/iri.c:126 #, c-format msgid "Conversion from %s to %s isn't supported\n" msgstr "不支持从 %s 转换为 %s\n" #: src/iri.c:149 src/iri.c:190 #, c-format msgid "converted '%s' (%s) -> '%s' (%s)\n" msgstr "" #: src/iri.c:158 msgid "Incomplete or invalid multibyte sequence encountered\n" msgstr "出现不完整或无效的多字节序列\n" #: src/iri.c:183 #, c-format msgid "Unhandled errno %d\n" msgstr "无法处理的错误 %d\n" #: src/iri.c:204 msgid "locale_to_utf8: locale is unset\n" msgstr "locale_to_utf8: locale 未设定\n" #: src/iri.c:238 #, c-format msgid "idn_encode failed (%d): %s\n" msgstr "idn_encode 错误 (%d): %s\n" #: src/iri.c:257 #, c-format msgid "idn_decode failed (%d): %s\n" msgstr "idn_decode 错误 (%d): %s\n" #: src/log.c:867 #, c-format msgid "" "\n" "%s received, redirecting output to %s.\n" msgstr "" "\n" "接收 %s 完毕，正在把输出重定向至 %s。\n" #: src/log.c:877 #, c-format msgid "" "\n" "%s received.\n" msgstr "" "\n" "接收了 %s。\n" #: src/log.c:878 #, c-format msgid "%s: %s; disabling logging.\n" msgstr "%s：%s；禁用日志记录。\n" #: src/main.c:414 #, c-format msgid "Usage: %s [OPTION]... [URL]...\n" msgstr "用法： %s [选项]... [URL]...\n" #: src/main.c:426 msgid "" "Mandatory arguments to long options are mandatory for short options too.\n" "\n" msgstr "" "长选项所必须的参数在使用短选项时也是必须的。\n" "\n" #: src/main.c:428 msgid "Startup:\n" msgstr "启动：\n" #: src/main.c:430 #, fuzzy msgid "" " -V, --version display the version of Wget and exit.\n" msgstr " -V, --version 显示 Wget 的版本信息并退出。\n" #: src/main.c:432 #, fuzzy msgid " -h, --help print this help.\n" msgstr " -h, --help 打印此帮助。\n" #: src/main.c:434 #, fuzzy msgid " -b, --background go to background after startup.\n" msgstr " -b, --background 启动后转入后台。\n" #: src/main.c:436 #, fuzzy msgid " -e, --execute=COMMAND execute a `.wgetrc'-style command.\n" msgstr " -e, --execute=COMMAND 运行一个“.wgetrc”风格的命令。\n" #: src/main.c:440 msgid "Logging and input file:\n" msgstr "日志和输入文件：\n" #: src/main.c:442 #, fuzzy msgid " -o, --output-file=FILE log messages to FILE.\n" msgstr " -o, --output-file=FILE 将日志信息写入 FILE。\n" #: src/main.c:444 #, fuzzy msgid " -a, --append-output=FILE append messages to FILE.\n" msgstr " -a, --append-output=FILE 将信息添加至 FILE。\n" #: src/main.c:447 #, fuzzy msgid "" " -d, --debug print lots of debugging information.\n" msgstr " -d, --debug 打印大量调试信息。\n" #: src/main.c:451 #, fuzzy msgid " --wdebug print Watt-32 debug output.\n" msgstr " --wdebug 打印 Watt-32 调试信息。\n" #: src/main.c:454 #, fuzzy msgid " -q, --quiet quiet (no output).\n" msgstr " -q, --quiet 安静模式 (无信息输出)。\n" #: src/main.c:456 #, fuzzy msgid " -v, --verbose be verbose (this is the default).\n" msgstr " -v, --verbose 详尽的输出 (此为默认值)。\n" #: src/main.c:458 #, fuzzy msgid "" " -nv, --no-verbose turn off verboseness, without being " "quiet.\n" msgstr " -nv, --no-verbose 关闭详尽输出，但不进入安静模式。\n" #: src/main.c:460 msgid "" " --report-speed=TYPE Output bandwidth as TYPE. TYPE can be " "bits.\n" msgstr "" #: src/main.c:462 #, fuzzy msgid "" " -i, --input-file=FILE download URLs found in local or external " "FILE.\n" msgstr " -i, --input-file=FILE 下载本地或外部 FILE 中的 URLs。\n" #: src/main.c:464 #, fuzzy msgid " -F, --force-html treat input file as HTML.\n" msgstr " -F, --force-html 把输入文件当成 HTML 文件。\n" #: src/main.c:466 #, fuzzy msgid "" " -B, --base=URL resolves HTML input-file links (-i -F)\n" " relative to URL.\n" msgstr "" " -B, --base=URL 解析与 URL 相关的\n" " HTML 输入文件 (由 -i -F 选项指定)。\n" #: src/main.c:469 #, fuzzy msgid " --config=FILE Specify config file to use.\n" msgstr " --certificate=FILE 客户端证书文件。\n" #: src/main.c:471 #, fuzzy msgid " --no-config Do not read any config file.\n" msgstr " --no-cookies 不使用 cookies。\n" #: src/main.c:475 msgid "Download:\n" msgstr "下载：\n" #: src/main.c:477 #, fuzzy msgid "" " -t, --tries=NUMBER set number of retries to NUMBER (0 " "unlimits).\n" msgstr "" " -t, --tries=NUMBER 设置重试次数为 NUMBER (0 代表无限制)。\n" #: src/main.c:479 #, fuzzy msgid "" " --retry-connrefused retry even if connection is refused.\n" msgstr " --retry-connrefused 即使拒绝连接也是重试。\n" #: src/main.c:481 #, fuzzy msgid " -O, --output-document=FILE write documents to FILE.\n" msgstr " -O, --output-document=FILE 将文档写入 FILE。\n" #: src/main.c:483 #, fuzzy msgid "" " -nc, --no-clobber skip downloads that would download to\n" " existing files (overwriting them).\n" msgstr "" " -nc, --no-clobber 不要重复下载已存在的文件。\n" " \n" #: src/main.c:486 #, fuzzy msgid "" " -c, --continue resume getting a partially-downloaded " "file.\n" msgstr " -c, --continue 断点续传下载文件。\n" #: src/main.c:488 msgid "" " --start-pos=OFFSET start downloading from zero-based " "position OFFSET.\n" msgstr "" #: src/main.c:490 #, fuzzy msgid " --progress=TYPE select progress gauge type.\n" msgstr " --progress=TYPE 选择进度条类型。\n" #: src/main.c:492 #, fuzzy msgid "" " --show-progress display the progress bar in any verbosity " "mode.\n" msgstr " --progress=TYPE 选择进度条类型。\n" #: src/main.c:494 #, fuzzy msgid "" " -N, --timestamping don't re-retrieve files unless newer " "than\n" " local.\n" msgstr " -N, --timestamping 只获取比本地文件新的文件。\n" #: src/main.c:497 #, fuzzy msgid "" " --no-use-server-timestamps don't set the local file's timestamp by\n" " the one on the server.\n" msgstr "" " --no-use-server-timestamps 不用服务器上的时间戳来设置本地文件。\n" #: src/main.c:500 #, fuzzy msgid " -S, --server-response print server response.\n" msgstr " -S, --server-response 打印服务器响应。\n" #: src/main.c:502 #, fuzzy msgid " --spider don't download anything.\n" msgstr " --spider 不下载任何文件。\n" #: src/main.c:504 #, fuzzy msgid " -T, --timeout=SECONDS set all timeout values to SECONDS.\n" msgstr " -T, --timeout=SECONDS 将所有超时设为 SECONDS 秒。\n" #: src/main.c:506 #, fuzzy msgid "" " --dns-timeout=SECS set the DNS lookup timeout to SECS.\n" msgstr " --dns-timeout=SECS 设置 DNS 查寻超时为 SECS 秒。\n" #: src/main.c:508 #, fuzzy msgid " --connect-timeout=SECS set the connect timeout to SECS.\n" msgstr " --connect-timeout=SECS 设置连接超时为 SECS 秒。\n" #: src/main.c:510 #, fuzzy msgid " --read-timeout=SECS set the read timeout to SECS.\n" msgstr " --read-timeout=SECS 设置读取超时为 SECS 秒。\n" #: src/main.c:512 #, fuzzy msgid " -w, --wait=SECONDS wait SECONDS between retrievals.\n" msgstr " -w, --wait=SECONDS 等待间隔为 SECONDS 秒。\n" #: src/main.c:514 #, fuzzy msgid "" " --waitretry=SECONDS wait 1..SECONDS between retries of a " "retrieval.\n" msgstr "" " --waitretry=SECONDS 在获取文件的重试期间等待 1..SECONDS 秒。\n" #: src/main.c:516 #, fuzzy msgid "" " --random-wait wait from 0.5*WAIT...1.5*WAIT secs " "between retrievals.\n" msgstr "" " --random-wait 获取多个文件时，每次随机等待间隔\n" " 0.5*WAIT...1.5*WAIT 秒。\n" #: src/main.c:518 #, fuzzy msgid " --no-proxy explicitly turn off proxy.\n" msgstr " --no-proxy 禁止使用代理。\n" #: src/main.c:520 #, fuzzy msgid " -Q, --quota=NUMBER set retrieval quota to NUMBER.\n" msgstr " -Q, --quota=NUMBER 设置获取配额为 NUMBER 字节。\n" #: src/main.c:522 #, fuzzy msgid "" " --bind-address=ADDRESS bind to ADDRESS (hostname or IP) on local " "host.\n" msgstr "" " --bind-address=ADDRESS 绑定至本地主机上的 ADDRESS (主机名或是 " "IP)。\n" #: src/main.c:524 #, fuzzy msgid " --limit-rate=RATE limit download rate to RATE.\n" msgstr " --limit-rate=RATE 限制下载速率为 RATE。\n" #: src/main.c:526 #, fuzzy msgid " --no-dns-cache disable caching DNS lookups.\n" msgstr " --no-dns-cache 关闭 DNS 查寻缓存。\n" #: src/main.c:528 #, fuzzy msgid "" " --restrict-file-names=OS restrict chars in file names to ones OS " "allows.\n" msgstr "" " --restrict-file-names=OS 限定文件名中的字符为 OS 允许的字符。\n" #: src/main.c:530 #, fuzzy msgid "" " --ignore-case ignore case when matching files/" "directories.\n" msgstr " --ignore-case 匹配文件/目录时忽略大小写。\n" #: src/main.c:533 #, fuzzy msgid " -4, --inet4-only connect only to IPv4 addresses.\n" msgstr " -4, --inet4-only 仅连接至 IPv4 地址。\n" #: src/main.c:535 #, fuzzy msgid " -6, --inet6-only connect only to IPv6 addresses.\n" msgstr " -6, --inet6-only 仅连接至 IPv6 地址。\n" #: src/main.c:537 #, fuzzy msgid "" " --prefer-family=FAMILY connect first to addresses of specified " "family,\n" " one of IPv6, IPv4, or none.\n" msgstr "" " --prefer-family=FAMILY 首先连接至指定协议的地址\n" " FAMILY 为 IPv6，IPv4 或是 none。\n" #: src/main.c:541 #, fuzzy msgid "" " --user=USER set both ftp and http user to USER.\n" msgstr "" " --user=USER 将 ftp 和 http 的用户名均设置为 USER。\n" #: src/main.c:543 #, fuzzy msgid "" " --password=PASS set both ftp and http password to PASS.\n" msgstr "" " --password=PASS 将 ftp 和 http 的密码均设置为 PASS。\n" #: src/main.c:545 #, fuzzy msgid " --ask-password prompt for passwords.\n" msgstr " --ask-password 提示输入密码。\n" #: src/main.c:547 #, fuzzy msgid " --no-iri turn off IRI support.\n" msgstr " --no-iri 关闭 IRI 支持。\n" #: src/main.c:549 #, fuzzy msgid "" " --local-encoding=ENC use ENC as the local encoding for IRIs.\n" msgstr "" " --local-encoding=ENC IRI (国际化资源标识符) 使用 ENC 作为本地编" "码。\n" #: src/main.c:551 #, fuzzy msgid "" " --remote-encoding=ENC use ENC as the default remote encoding.\n" msgstr " --remote-encoding=ENC 使用 ENC 作为默认远程编码。\n" #: src/main.c:553 #, fuzzy msgid " --unlink remove file before clobber.\n" msgstr " --no-glob 不在 FTP 文件名中使用通配符展开。\n" #: src/main.c:557 msgid "Directories:\n" msgstr "目录：\n" #: src/main.c:559 #, fuzzy msgid " -nd, --no-directories don't create directories.\n" msgstr " -nd, --no-directories 不创建目录。\n" #: src/main.c:561 #, fuzzy msgid " -x, --force-directories force creation of directories.\n" msgstr " -x, --force-directories 强制创建目录。\n" #: src/main.c:563 #, fuzzy msgid " -nH, --no-host-directories don't create host directories.\n" msgstr " -nH, --no-host-directories 不要创建主目录。\n" #: src/main.c:565 #, fuzzy msgid " --protocol-directories use protocol name in directories.\n" msgstr " --protocol-directories 在目录中使用协议名称。\n" #: src/main.c:567 #, fuzzy msgid " -P, --directory-prefix=PREFIX save files to PREFIX/...\n" msgstr " -P, --directory-prefix=PREFIX 以 PREFIX/... 保存文件\n" #: src/main.c:569 #, fuzzy msgid "" " --cut-dirs=NUMBER ignore NUMBER remote directory " "components.\n" msgstr " --cut-dirs=NUMBER 忽略远程目录中 NUMBER 个目录层。\n" #: src/main.c:573 msgid "HTTP options:\n" msgstr "HTTP 选项：\n" #: src/main.c:575 #, fuzzy msgid " --http-user=USER set http user to USER.\n" msgstr " --http-user=USER 设置 http 用户名为 USER。\n" #: src/main.c:577 #, fuzzy msgid " --http-password=PASS set http password to PASS.\n" msgstr " --http-password=PASS 设置 http 密码为 PASS。\n" #: src/main.c:579 #, fuzzy msgid " --no-cache disallow server-cached data.\n" msgstr " --no-cache 不在服务器上缓存数据。\n" #: src/main.c:581 #, fuzzy msgid "" " --default-page=NAME Change the default page name (normally\n" " this is `index.html'.).\n" msgstr "" " --default-page=NAME 改变默认页\n" " (默认页通常是“index.html”)。\n" #: src/main.c:584 #, fuzzy msgid "" " -E, --adjust-extension save HTML/CSS documents with proper " "extensions.\n" msgstr " -E, --adjust-extension 以合适的扩展名保存 HTML/CSS 文档。\n" #: src/main.c:586 #, fuzzy msgid "" " --ignore-length ignore `Content-Length' header field.\n" msgstr " --ignore-length 忽略头部的‘Content-Length’区域。\n" #: src/main.c:588 #, fuzzy msgid " --header=STRING insert STRING among the headers.\n" msgstr " --header=STRING 在头部插入 STRING。\n" #: src/main.c:590 #, fuzzy msgid "" " --max-redirect maximum redirections allowed per page.\n" msgstr " --max-redirect 每页所允许的最大重定向。\n" #: src/main.c:592 #, fuzzy msgid " --proxy-user=USER set USER as proxy username.\n" msgstr " --proxy-user=USER 使用 USER 作为代理用户名。\n" #: src/main.c:594 #, fuzzy msgid " --proxy-password=PASS set PASS as proxy password.\n" msgstr " --proxy-password=PASS 使用 PASS 作为代理密码。\n" #: src/main.c:596 #, fuzzy msgid "" " --referer=URL include `Referer: URL' header in HTTP " "request.\n" msgstr " --referer=URL 在 HTTP 请求头包含‘Referer: URL’。\n" #: src/main.c:598 #, fuzzy msgid " --save-headers save the HTTP headers to file.\n" msgstr " --save-headers 将 HTTP 头保存至文件。\n" #: src/main.c:600 #, fuzzy msgid "" " -U, --user-agent=AGENT identify as AGENT instead of Wget/" "VERSION.\n" msgstr " -U, --user-agent=AGENT 标识为 AGENT 而不是 Wget/VERSION。\n" #: src/main.c:602 #, fuzzy msgid "" " --no-http-keep-alive disable HTTP keep-alive (persistent " "connections).\n" msgstr " --no-http-keep-alive 禁用 HTTP keep-alive (永久连接)。\n" #: src/main.c:604 #, fuzzy msgid " --no-cookies don't use cookies.\n" msgstr " --no-cookies 不使用 cookies。\n" #: src/main.c:606 #, fuzzy msgid "" " --load-cookies=FILE load cookies from FILE before session.\n" msgstr " --load-cookies=FILE 会话开始前从 FILE 中载入 cookies。\n" #: src/main.c:608 #, fuzzy msgid "" " --save-cookies=FILE save cookies to FILE after session.\n" msgstr " --save-cookies=FILE 会话结束后保存 cookies 至 FILE。\n" #: src/main.c:610 #, fuzzy msgid "" " --keep-session-cookies load and save session (non-permanent) " "cookies.\n" msgstr " --keep-session-cookies 载入并保存会话 (非永久) cookies。\n" #: src/main.c:612 #, fuzzy msgid "" " --post-data=STRING use the POST method; send STRING as the " "data.\n" msgstr "" " --post-data=STRING 使用 POST 方式；把 STRING 作为数据发送。\n" #: src/main.c:614 #, fuzzy msgid "" " --post-file=FILE use the POST method; send contents of " "FILE.\n" msgstr " --post-file=FILE 使用 POST 方式；发送 FILE 内容。\n" #: src/main.c:616 msgid "" " --method=HTTPMethod use method \"HTTPMethod\" in the " "request.\n" msgstr "" #: src/main.c:618 #, fuzzy msgid "" " --body-data=STRING Send STRING as data. --method MUST be " "set.\n" msgstr "" " --post-data=STRING 使用 POST 方式；把 STRING 作为数据发送。\n" #: src/main.c:620 #, fuzzy msgid "" " --body-file=FILE Send contents of FILE. --method MUST be " "set.\n" msgstr " --post-file=FILE 使用 POST 方式；发送 FILE 内容。\n" #: src/main.c:622 #, fuzzy msgid "" " --content-disposition honor the Content-Disposition header " "when\n" " choosing local file names " "(EXPERIMENTAL).\n" msgstr "" " --content-disposition 当选中本地文件名时\n" " 允许 Content-Disposition 头部 (尚在实验)。\n" #: src/main.c:625 msgid "" " --content-on-error output the received content on server " "errors.\n" msgstr "" #: src/main.c:627 #, fuzzy msgid "" " --auth-no-challenge send Basic HTTP authentication " "information\n" " without first waiting for the server's\n" " challenge.\n" msgstr "" " --auth-no-challenge 发送不含服务器询问的首次等待\n" " 的基本 HTTP 验证信息。\n" #: src/main.c:634 msgid "HTTPS (SSL/TLS) options:\n" msgstr "HTTPS (SSL/TLS) 选项：\n" #: src/main.c:636 #, fuzzy msgid "" " --secure-protocol=PR choose secure protocol, one of auto, " "SSLv2,\n" " SSLv3, TLSv1 and PFS.\n" msgstr "" " --secure-protocol=PR 选择安全协议，可以是 auto、SSLv2、\n" " SSLv3 或是 TLSv1 中的一个。\n" #: src/main.c:639 #, fuzzy msgid " --https-only only follow secure HTTPS links\n" msgstr " -L, --relative 只跟踪有关系的链接。\n" #: src/main.c:641 #, fuzzy msgid "" " --no-check-certificate don't validate the server's certificate.\n" msgstr " --no-check-certificate 不要验证服务器的证书。\n" #: src/main.c:643 #, fuzzy msgid " --certificate=FILE client certificate file.\n" msgstr " --certificate=FILE 客户端证书文件。\n" #: src/main.c:645 #, fuzzy msgid "" " --certificate-type=TYPE client certificate type, PEM or DER.\n" msgstr " --certificate-type=TYPE 客户端证书类型，PEM 或 DER。\n" #: src/main.c:647 #, fuzzy msgid " --private-key=FILE private key file.\n" msgstr " --private-key=FILE 私钥文件。\n" #: src/main.c:649 #, fuzzy msgid " --private-key-type=TYPE private key type, PEM or DER.\n" msgstr " --private-key-type=TYPE 私钥文件类型，PEM 或 DER。\n" #: src/main.c:651 #, fuzzy msgid " --ca-certificate=FILE file with the bundle of CA's.\n" msgstr " --ca-certificate=FILE 带有一组 CA 认证的文件。\n" #: src/main.c:653 #, fuzzy msgid "" " --ca-directory=DIR directory where hash list of CA's is " "stored.\n" msgstr " --ca-directory=DIR 保存 CA 认证的哈希列表的目录。\n" #: src/main.c:655 #, fuzzy msgid "" " --random-file=FILE file with random data for seeding the SSL " "PRNG.\n" msgstr " --random-file=FILE 带有生成 SSL PRNG 的随机数据的文件。\n" #: src/main.c:657 #, fuzzy msgid "" " --egd-file=FILE file naming the EGD socket with random " "data.\n" msgstr "" " --egd-file=FILE 用于命名带有随机数据的 EGD 套接字的文件。\n" #: src/main.c:662 msgid "FTP options:\n" msgstr "FTP 选项：\n" #: src/main.c:665 #, fuzzy msgid "" " --ftp-stmlf Use Stream_LF format for all binary FTP " "files.\n" msgstr "" " --ftp-stmlf 对所有二进制 FTP 文件使用 Stream_LF 格式\n" #: src/main.c:668 #, fuzzy msgid " --ftp-user=USER set ftp user to USER.\n" msgstr " --ftp-user=USER 设置 ftp 用户名为 USER。\n" #: src/main.c:670 #, fuzzy msgid " --ftp-password=PASS set ftp password to PASS.\n" msgstr " --ftp-password=PASS 设置 ftp 密码为 PASS。\n" #: src/main.c:672 #, fuzzy msgid " --no-remove-listing don't remove `.listing' files.\n" msgstr " --no-remove-listing 不要删除‘.listing’文件。\n" #: src/main.c:674 #, fuzzy msgid " --no-glob turn off FTP file name globbing.\n" msgstr " --no-glob 不在 FTP 文件名中使用通配符展开。\n" #: src/main.c:676 #, fuzzy msgid "" " --no-passive-ftp disable the \"passive\" transfer mode.\n" msgstr " --no-passive-ftp 禁用“passive”传输模式。\n" #: src/main.c:678 #, fuzzy msgid " --preserve-permissions preserve remote file permissions.\n" msgstr " --preserve-permissions 保留远程文件的权限。\n" #: src/main.c:680 #, fuzzy msgid "" " --retr-symlinks when recursing, get linked-to files (not " "dir).\n" msgstr "" " --retr-symlinks 递归目录时，获取链接的文件 (而非目录)。\n" #: src/main.c:684 #, fuzzy msgid "WARC options:\n" msgstr "FTP 选项：\n" #: src/main.c:686 msgid "" " --warc-file=FILENAME save request/response data to a .warc.gz " "file.\n" msgstr "" #: src/main.c:688 #, fuzzy msgid "" " --warc-header=STRING insert STRING into the warcinfo record.\n" msgstr " --header=STRING 在头部插入 STRING。\n" #: src/main.c:690 #, fuzzy msgid "" " --warc-max-size=NUMBER set maximum size of WARC files to " "NUMBER.\n" msgstr "" " -t, --tries=NUMBER 设置重试次数为 NUMBER (0 代表无限制)。\n" #: src/main.c:692 #, fuzzy msgid " --warc-cdx write CDX index files.\n" msgstr " --spider 不下载任何文件。\n" #: src/main.c:694 msgid "" " --warc-dedup=FILENAME do not store records listed in this CDX " "file.\n" msgstr "" #: src/main.c:697 msgid "" " --no-warc-compression do not compress WARC files with GZIP.\n" msgstr "" #: src/main.c:700 #, fuzzy msgid " --no-warc-digests do not calculate SHA1 digests.\n" msgstr " --no-cookies 不使用 cookies。\n" #: src/main.c:702 #, fuzzy msgid "" " --no-warc-keep-log do not store the log file in a WARC " "record.\n" msgstr " --ignore-case 匹配文件/目录时忽略大小写。\n" #: src/main.c:704 msgid "" " --warc-tempdir=DIRECTORY location for temporary files created by " "the\n" " WARC writer.\n" msgstr "" #: src/main.c:709 msgid "Recursive download:\n" msgstr "递归下载：\n" #: src/main.c:711 #, fuzzy msgid " -r, --recursive specify recursive download.\n" msgstr " -r, --recursive 指定递归下载。\n" #: src/main.c:713 #, fuzzy msgid "" " -l, --level=NUMBER maximum recursion depth (inf or 0 for " "infinite).\n" msgstr "" " -l, --level=NUMBER 最大递归深度 (inf 或 0 代表无限制，即全部下" "载)。\n" #: src/main.c:715 #, fuzzy msgid "" " --delete-after delete files locally after downloading " "them.\n" msgstr " --delete-after 下载完成后删除本地文件。\n" #: src/main.c:717 #, fuzzy msgid "" " -k, --convert-links make links in downloaded HTML or CSS " "point to\n" " local files.\n" msgstr "" " -k, --convert-links 让下载得到的 HTML 或 CSS 中的链接指向本地文件。\n" #: src/main.c:720 msgid "" " --backups=N before writing file X, rotate up to N " "backup files.\n" msgstr "" #: src/main.c:724 #, fuzzy msgid "" " -K, --backup-converted before converting file X, back up as " "X_orig.\n" msgstr " -K, --backup-converted 在转换文件 X 前先将它备份为 X_orig。\n" #: src/main.c:727 #, fuzzy msgid "" " -K, --backup-converted before converting file X, back up as X." "orig.\n" msgstr " -K, --backup-converted 在转换文件 X 前先将它备份为 X.orig。\n" #: src/main.c:730 #, fuzzy msgid "" " -m, --mirror shortcut for -N -r -l inf --no-remove-" "listing.\n" msgstr "" " -m, --mirror -N -r -l inf --no-remove-listing 的缩写形式。\n" #: src/main.c:732 #, fuzzy msgid "" " -p, --page-requisites get all images, etc. needed to display " "HTML page.\n" msgstr "" " -p, --page-requisites 下载所有用于显示 HTML 页面的图片之类的元素。\n" #: src/main.c:734 #, fuzzy msgid "" " --strict-comments turn on strict (SGML) handling of HTML " "comments.\n" msgstr " --strict-comments 用严格方式 (SGML) 处理 HTML 注释。\n" #: src/main.c:738 msgid "Recursive accept/reject:\n" msgstr "递归接受/拒绝：\n" #: src/main.c:740 msgid "" " -A, --accept=LIST comma-separated list of accepted " "extensions.\n" msgstr " -A, --accept=LIST 逗号分隔的可接受的扩展名列表。\n" #: src/main.c:742 msgid "" " -R, --reject=LIST comma-separated list of rejected " "extensions.\n" msgstr " -R, --reject=LIST 逗号分隔的要拒绝的扩展名列表。\n" #: src/main.c:744 msgid " --accept-regex=REGEX regex matching accepted URLs.\n" msgstr "" #: src/main.c:746 msgid " --reject-regex=REGEX regex matching rejected URLs.\n" msgstr "" #: src/main.c:749 #, fuzzy msgid " --regex-type=TYPE regex type (posix|pcre).\n" msgstr " --progress=TYPE 选择进度条类型。\n" #: src/main.c:752 #, fuzzy msgid " --regex-type=TYPE regex type (posix).\n" msgstr " --progress=TYPE 选择进度条类型。\n" #: src/main.c:755 msgid "" " -D, --domains=LIST comma-separated list of accepted " "domains.\n" msgstr " -D, --domains=LIST 逗号分隔的可接受的域列表。\n" #: src/main.c:757 msgid "" " --exclude-domains=LIST comma-separated list of rejected " "domains.\n" msgstr " --exclude-domains=LIST 逗号分隔的要拒绝的域列表。\n" #: src/main.c:759 msgid "" " --follow-ftp follow FTP links from HTML documents.\n" msgstr " --follow-ftp 跟踪 HTML 文档中的 FTP 链接。\n" #: src/main.c:761 msgid "" " --follow-tags=LIST comma-separated list of followed HTML " "tags.\n" msgstr " --follow-tags=LIST 逗号分隔的跟踪的 HTML 标识列表。\n" #: src/main.c:763 msgid "" " --ignore-tags=LIST comma-separated list of ignored HTML " "tags.\n" msgstr " --ignore-tags=LIST 逗号分隔的忽略的 HTML 标识列表。\n" #: src/main.c:765 msgid "" " -H, --span-hosts go to foreign hosts when recursive.\n" msgstr " -H, --span-hosts 递归时转向外部主机。\n" #: src/main.c:767 msgid " -L, --relative follow relative links only.\n" msgstr " -L, --relative 只跟踪有关系的链接。\n" #: src/main.c:769 msgid " -I, --include-directories=LIST list of allowed directories.\n" msgstr " -I, --include-directories=LIST 允许目录的列表。\n" #: src/main.c:771 #, fuzzy msgid "" " --trust-server-names use the name specified by the " "redirection\n" " url last component.\n" msgstr "" " --trust-server-names 使用重定向 URL 的最后一段作为本地文件" "名。\n" #: src/main.c:774 msgid " -X, --exclude-directories=LIST list of excluded directories.\n" msgstr " -X, --exclude-directories=LIST 排除目录的列表。\n" #: src/main.c:776 msgid "" " -np, --no-parent don't ascend to the parent directory.\n" msgstr " -np, --no-parent 不追溯至父目录。\n" #: src/main.c:779 msgid "Mail bug reports and suggestions to .\n" msgstr "请将错误报告或建议寄给 。\n" #: src/main.c:784 #, c-format msgid "GNU Wget %s, a non-interactive network retriever.\n" msgstr "GNU Wget %s，非交互式的网络文件下载工具。\n" #: src/main.c:827 #, c-format msgid "Password for user %s: " msgstr "用户 %s 的密码: " #: src/main.c:829 #, c-format msgid "Password: " msgstr "密码: " #: src/main.c:885 msgid "Wgetrc: " msgstr "Wgetrc: " #: src/main.c:886 msgid "Locale: " msgstr "字符集: " #: src/main.c:887 msgid "Compile: " msgstr "编译: " #: src/main.c:888 msgid "Link: " msgstr "链接程序: " #: src/main.c:892 #, c-format msgid "" "GNU Wget %s built on %s.\n" "\n" msgstr "" "GNU Wget %s 在 %s 上编译。\n" "\n" #: src/main.c:919 #, c-format msgid " %s (env)\n" msgstr " %s (环境)\n" #: src/main.c:926 #, c-format msgid " %s (user)\n" msgstr " %s (用户)\n" #: src/main.c:931 #, c-format msgid " %s (system)\n" msgstr " %s (系统)\n" #. TRANSLATORS: When available, an actual copyright character #. (circle-c) should be used in preference to "(C)". #: src/main.c:959 #, fuzzy, c-format msgid "Copyright (C) %s Free Software Foundation, Inc.\n" msgstr "版权所有 © 2009 Free Software Foundation, Inc.\n" #: src/main.c:962 msgid "" "License GPLv3+: GNU GPL version 3 or later\n" ".\n" "This is free software: you are free to change and redistribute it.\n" "There is NO WARRANTY, to the extent permitted by law.\n" msgstr "" "授权 GPLv3+: GNU GPL 第三版或更高版本\n" "。\n" "这是自由软件：您可以自由地更改并重新分发它。\n" "在法律所允许的范围内，没有任何担保。\n" #. TRANSLATORS: When available, please use the proper diacritics for #. names such as this one. See en_US.po for reference. #: src/main.c:970 msgid "" "\n" "Originally written by Hrvoje Niksic .\n" msgstr "" "\n" "最初由 Hrvoje Nikšić 编写。\n" #: src/main.c:973 msgid "Please send bug reports and questions to .\n" msgstr "请将错误报告或建议寄给 。\n" #: src/main.c:1024 src/main.c:1515 #, c-format msgid "Memory allocation problem\n" msgstr "" #: src/main.c:1075 #, c-format msgid "Exiting due to error in %s\n" msgstr "" #: src/main.c:1104 src/main.c:1174 src/main.c:1376 #, c-format msgid "Try `%s --help' for more options.\n" msgstr "请尝试使用“%s --help”查看更多的选项。\n" #: src/main.c:1170 #, c-format msgid "%s: illegal option -- `-n%c'\n" msgstr "%s：非法的选项 -- “-n%c”\n" #: src/main.c:1213 #, c-format msgid "Debugging support not compiled in. Ignoring --debug flag.\n" msgstr "" #: src/main.c:1225 #, c-format msgid "" "Both --no-clobber and --convert-links were specified, only --convert-links " "will be used.\n" msgstr "" #: src/main.c:1255 #, c-format msgid "Can't be verbose and quiet at the same time.\n" msgstr "无法同时使用详细输出模式和安静模式。\n" #: src/main.c:1261 #, c-format msgid "Can't timestamp and not clobber old files at the same time.\n" msgstr "无法修改时间戳标记而不更改本地文件。\n" #: src/main.c:1270 #, c-format msgid "Cannot specify both --inet4-only and --inet6-only.\n" msgstr "无法同时指定 --inet4-only 和 --inet6-only。\n" #: src/main.c:1280 msgid "" "Cannot specify both -k and -O if multiple URLs are given, or in combination\n" "with -p or -r. See the manual for details.\n" "\n" msgstr "" "如果给出了多个 URL 则无法同时指定 -k 和 -O 选项，也不可以与 -p 或 -r 选项\n" "结合使用。参阅手册来获取详细信息。\n" "\n" #: src/main.c:1289 msgid "" "WARNING: combining -O with -r or -p will mean that all downloaded content\n" "will be placed in the single file you specified.\n" "\n" msgstr "" "警告: 将 -O 与 -r 或 -p 选项结合使用意味着所有下载来的内容\n" "会被放入您指定的那个单一文件。\n" "\n" #: src/main.c:1295 msgid "" "WARNING: timestamping does nothing in combination with -O. See the manual\n" "for details.\n" "\n" msgstr "" "警告: 时间戳与 -O 结合使用没有任何效果。\n" "参阅手册来获取详细信息。\n" "\n" #: src/main.c:1304 #, c-format msgid "File `%s' already there; not retrieving.\n" msgstr "文件“%s”已经存在；不获取。\n" #: src/main.c:1315 #, c-format msgid "" "WARC output does not work with --no-clobber, --no-clobber will be disabled.\n" msgstr "" #: src/main.c:1322 #, c-format msgid "" "WARC output does not work with timestamping, timestamping will be disabled.\n" msgstr "" #: src/main.c:1329 #, c-format msgid "WARC output does not work with --spider.\n" msgstr "" #: src/main.c:1335 #, c-format msgid "" "WARC output does not work with --continue or --start-pos, they will be " "disabled.\n" msgstr "" #: src/main.c:1343 #, c-format msgid "" "Digests are disabled; WARC deduplication will not find duplicate records.\n" msgstr "" #: src/main.c:1355 #, c-format msgid "Cannot specify both --ask-password and --password.\n" msgstr "无法同时指定 --ask-password 和 --password。\n" #: src/main.c:1363 #, c-format msgid "" "Specifying both --start-pos and --continue is not recommended; --continue " "will be disabled.\n" msgstr "" #: src/main.c:1371 #, c-format msgid "%s: missing URL\n" msgstr "%s：未指定 URL\n" #: src/main.c:1412 #, fuzzy, c-format msgid "You cannot specify both --post-data and --post-file.\n" msgstr "无法同时指定 --ask-password 和 --password。\n" #: src/main.c:1417 #, c-format msgid "" "You cannot use --post-data or --post-file along with --method. --method " "expects data through --body-data and --body-file options" msgstr "" #: src/main.c:1426 #, c-format msgid "" "You must specify a method through --method=HTTPMethod to use with --body-" "data or --body-file.\n" msgstr "" #: src/main.c:1432 #, fuzzy, c-format msgid "You cannot specify both --body-data and --body-file.\n" msgstr "无法同时指定 --inet4-only 和 --inet6-only。\n" #: src/main.c:1484 #, c-format msgid "This version does not have support for IRIs\n" msgstr "此版本不支持 IRIs\n" #: src/main.c:1584 #, c-format msgid "-k can be used together with -O only if outputting to a regular file.\n" msgstr "-k 只有在输出至普通文件的时候才可以与 -O 共用。\n" #: src/main.c:1689 #, c-format msgid "No URLs found in %s.\n" msgstr "在 %s 中找不到 URL。\n" #: src/main.c:1710 #, fuzzy, c-format msgid "" "FINISHED --%s--\n" "Total wall clock time: %s\n" "Downloaded: %d files, %s in %s (%s)\n" msgstr "" "下载完毕 --%1$s--\n" "下载了：%2$d 个文件，%4$s (%5$s) 中的 %3$s\n" #: src/main.c:1724 #, c-format msgid "Download quota of %s EXCEEDED!\n" msgstr "超过下载限额 (%s 字节)！\n" #: src/mswindows.c:100 #, c-format msgid "Continuing in background.\n" msgstr "继续在后台运行。\n" #: src/mswindows.c:293 #, c-format msgid "Continuing in background, pid %lu.\n" msgstr "继续在后台运行，pid 为 %lu。\n" #: src/mswindows.c:295 src/utils.c:481 #, c-format msgid "Output will be written to %s.\n" msgstr "将把输出写入至 %s。\n" #: src/mswindows.c:327 #, c-format msgid "fake_fork_child() failed\n" msgstr "" #: src/mswindows.c:335 #, c-format msgid "fake_fork() failed\n" msgstr "" #: src/mswindows.c:463 src/mswindows.c:470 #, c-format msgid "%s: Couldn't find usable socket driver.\n" msgstr "%s：找不到可用的 socket 驱动程序。\n" #: src/mswindows.c:650 #, c-format msgid "ioctl() failed. The socket could not be set as blocking.\n" msgstr "" #: src/netrc.c:354 #, c-format msgid "%s: %s:%d: warning: %s token appears before any machine name\n" msgstr "%s：%s:%d：警告: %s 标记出现在机器名称前\n" #: src/netrc.c:385 #, c-format msgid "%s: %s:%d: unknown token \"%s\"\n" msgstr "%s：%s:%d：未知的标记“%s”\n" #: src/netrc.c:448 #, c-format msgid "Usage: %s NETRC [HOSTNAME]\n" msgstr "用法：%s NETRC [主机名]\n" #: src/netrc.c:466 #, c-format msgid "%s: cannot stat %s: %s\n" msgstr "%s：无法 stat %s：%s\n" #: src/openssl.c:118 msgid "WARNING: using a weak random seed.\n" msgstr "警告: 正在使用一个弱口令的随机种子。\n" #: src/openssl.c:189 msgid "Could not seed PRNG; consider using --random-file.\n" msgstr "无法 seed PRNG；考虑使用 --random-file。\n" #: src/openssl.c:630 #, c-format msgid "%s: cannot verify %s's certificate, issued by %s:\n" msgstr "%s: 无法验证 %s 的由 %s 颁发的证书:\n" #: src/openssl.c:639 msgid " Unable to locally verify the issuer's authority.\n" msgstr " 无法本地校验颁发者的权限。\n" #: src/openssl.c:644 msgid " Self-signed certificate encountered.\n" msgstr " 出现了自己签名的证书。\n" #: src/openssl.c:647 msgid " Issued certificate not yet valid.\n" msgstr " 颁发的证书还未生效。\n" #: src/openssl.c:650 msgid " Issued certificate has expired.\n" msgstr " 颁发的证书已经过期。\n" #: src/openssl.c:735 #, c-format msgid "" "%s: no certificate subject alternative name matches\n" "\trequested host name %s.\n" msgstr "" "%s: 没有匹配的证书主体别名 (Subject Alternative Name)。\n" "\t请求的主机名为 %s。\n" #: src/openssl.c:752 #, c-format msgid "" " %s: certificate common name %s doesn't match requested host name %s.\n" msgstr " %s: 证书通用名 %s 与所要求的主机名 %s 不符。\n" #: src/openssl.c:784 #, c-format msgid "" " %s: certificate common name is invalid (contains a NUL character).\n" " This may be an indication that the host is not who it claims to be\n" " (that is, it is not the real %s).\n" msgstr "" " %s: 证书通用名无效 (包含空字符)。\n" " 这可能意味着该主机所声称的身份与实际不符。\n" " (也就是说，它不是真正的 %s)。\n" #: src/openssl.c:802 #, c-format msgid "To connect to %s insecurely, use `--no-check-certificate'.\n" msgstr "要以不安全的方式连接至 %s，使用“--no-check-certificate”。\n" #: src/progress.c:244 #, c-format msgid "" "\n" "%*s[ skipping %sK ]" msgstr "" "\n" "%*s[ 跳过 %sK ]" #: src/progress.c:465 #, c-format msgid "Invalid dot style specification %s; leaving unchanged.\n" msgstr "无效的进度指示方式 %s；不会改变原来的方式。\n" #. TRANSLATORS: "ETA" is English-centric, but this must #. be short, ideally 3 chars. Abbreviate if necessary. #: src/progress.c:854 #, fuzzy, c-format msgid " eta %s" msgstr " 剩余 %s" #: src/progress.c:1150 msgid " in " msgstr " 用时 " #: src/ptimer.c:158 #, c-format msgid "Cannot get REALTIME clock frequency: %s\n" msgstr "无法获取 REALTIME 时钟频率: %s\n" #: src/recur.c:434 #, c-format msgid "Removing %s since it should be rejected.\n" msgstr "正在删除 %s 因为它应该被指定了拒绝下载。\n" #: src/res.c:391 #, c-format msgid "Cannot open %s: %s" msgstr "无法打开 %s: %s" #: src/res.c:550 msgid "Loading robots.txt; please ignore errors.\n" msgstr "正在载入 robots.txt；请忽略错误消息。\n" #: src/retr.c:768 #, c-format msgid "Error parsing proxy URL %s: %s.\n" msgstr "解析代理服务器 URL %s 时发生错误：%s。\n" #: src/retr.c:778 #, c-format msgid "Error in proxy URL %s: Must be HTTP.\n" msgstr "代理服务器 URL %s 错误：必须是 HTTP。\n" #: src/retr.c:879 #, c-format msgid "%d redirections exceeded.\n" msgstr "已超过 %d 次重定向。\n" #: src/retr.c:1126 msgid "" "Giving up.\n" "\n" msgstr "" "放弃操作。\n" "\n" #: src/retr.c:1126 msgid "" "Retrying.\n" "\n" msgstr "" "重试中。\n" "\n" #: src/spider.c:75 msgid "" "Found no broken links.\n" "\n" msgstr "" "未找到死链接。\n" "\n" #: src/spider.c:82 #, c-format msgid "" "Found %d broken link.\n" "\n" msgid_plural "" "Found %d broken links.\n" "\n" msgstr[0] "" "找到 %d 个死链接。\n" "\n" #: src/url.c:639 msgid "No error" msgstr "没有错误" #: src/url.c:641 #, c-format msgid "Unsupported scheme %s" msgstr "不支持的协议类型 %s" #: src/url.c:643 msgid "Scheme missing" msgstr "地址缺少协议类型" #: src/url.c:645 msgid "Invalid host name" msgstr "无效的主机名" #: src/url.c:647 msgid "Bad port number" msgstr "端口号错误" #: src/url.c:649 msgid "Invalid user name" msgstr "无效的用户名" #: src/url.c:651 msgid "Unterminated IPv6 numeric address" msgstr "未结束的 IPv6 数字地址" #: src/url.c:653 msgid "IPv6 addresses not supported" msgstr "不支持 IPv6 地址" #: src/url.c:655 msgid "Invalid IPv6 numeric address" msgstr "无效的 IPv6 数字地址" #: src/url.c:959 msgid "HTTPS support not compiled in" msgstr "未将 HTTPS 支持编译到程序中" #: src/utils.c:116 #, c-format msgid "%s: %s: Failed to allocate enough memory; memory exhausted.\n" msgstr "%s: %s: 无法分配足够内存；内存耗尽。\n" #: src/utils.c:122 #, c-format msgid "%s: %s: Failed to allocate %ld bytes; memory exhausted.\n" msgstr "%s: %s: 无法分配 %ld 字节；内存耗尽。\n" #: src/utils.c:336 #, c-format msgid "%s: aprintf: text buffer is too big (%ld bytes), aborting.\n" msgstr "%s: aprintf: 文本缓冲区太大 (%ld 字节)，退出。\n" #: src/utils.c:479 #, c-format msgid "Continuing in background, pid %d.\n" msgstr "继续在后台运行，pid 为 %d。\n" #: src/utils.c:555 #, c-format msgid "Failed to unlink symlink %s: %s\n" msgstr "无法删除符号链接 %s: %s\n" #: src/utils.c:2273 src/utils.c:2292 #, c-format msgid "Invalid regular expression %s, %s\n" msgstr "" #: src/utils.c:2315 src/utils.c:2339 #, fuzzy, c-format msgid "Error while matching %s: %d\n" msgstr "写入 %s 时发生错误: %s\n" #: src/warc.c:222 msgid "Error opening GZIP stream to WARC file.\n" msgstr "" #: src/warc.c:710 msgid "Error writing warcinfo record to WARC file.\n" msgstr "" #: src/warc.c:771 #, c-format msgid "" "Opening WARC file %s.\n" "\n" msgstr "" #: src/warc.c:777 #, fuzzy, c-format msgid "Error opening WARC file %s.\n" msgstr "解析证书时发生错误: %s。\n" #: src/warc.c:974 msgid "CDX file does not list original urls. (Missing column 'a'.)\n" msgstr "" #: src/warc.c:977 msgid "CDX file does not list checksums. (Missing column 'k'.)\n" msgstr "" #: src/warc.c:980 msgid "CDX file does not list record ids. (Missing column 'u'.)\n" msgstr "" #: src/warc.c:1002 #, c-format msgid "" "Loaded %d record from CDX.\n" "\n" msgid_plural "" "Loaded %d records from CDX.\n" "\n" msgstr[0] "" #: src/warc.c:1047 #, c-format msgid "Could not read CDX file %s for deduplication.\n" msgstr "" #: src/warc.c:1057 msgid "Could not open temporary WARC manifest file.\n" msgstr "" #: src/warc.c:1067 msgid "Could not open temporary WARC log file.\n" msgstr "" #: src/warc.c:1076 msgid "Could not open WARC file.\n" msgstr "" #: src/warc.c:1085 #, fuzzy msgid "Could not open CDX file for output.\n" msgstr "找不到代理服务器主机。\n" #: src/warc.c:1113 msgid "Could not open temporary WARC file.\n" msgstr "" #: src/warc.c:1370 msgid "Found exact match in CDX file. Saving revisit record to WARC.\n" msgstr "" #~ msgid "Authorization failed.\n" #~ msgstr "验证失败。\n" #~ msgid "" #~ "WARNING: Can't reopen standard output in binary mode;\n" #~ " downloaded file may contain inappropriate line endings.\n" #~ msgstr "" #~ "警告: 无法在二进制模式下重新打开标准输出设备；\n" #~ " 下载到的文件可能带有错误的行尾结束符。\n" #~ msgid "%s: illegal option -- %c\n" #~ msgstr "%s：非法选项 -- %c\n" #~ msgid "" #~ "GNU Wget %s built on VMS %s %s.\n" #~ "\n" #~ msgstr "" #~ "GNU Wget %s 在 VMS %s %s 上编译。\n" #~ "\n" #~ msgid "Currently maintained by Micah Cowan .\n" #~ msgstr "目前由 Micah Cowan 维护。\n" #~ msgid "" #~ " -B, --base=URL prepends URL to relative links in -F -i " #~ "file.\n" #~ msgstr "" #~ " -B, --base=URL prepends URL 至 -F -i 选项所指定文件中的相关" #~ "链接。\n" #~ msgid "Unable to convert `%s' to a bind address. Reverting to ANY.\n" #~ msgstr "无法转换 “%s”为绑定地址，正在恢复为 ANY。\n" #~ msgid "Error in Set-Cookie, field `%s'" #~ msgstr "在 Set-Cookie 的中出现错误，字段“%s”" #~ msgid "" #~ "\n" #~ "REST failed; will not truncate `%s'.\n" #~ msgstr "" #~ "\n" #~ "重置 (REST) 失败；不会截短‘%s’。\n" #~ msgid " [%s to go]" #~ msgstr " [尚有 %s]" #~ msgid "Host not found" #~ msgstr "找不到主机" #~ msgid "Failed to set up an SSL context\n" #~ msgstr "无法创建 SSL context\n" #~ msgid "Failed to load certificates from %s\n" #~ msgstr "无法从 %s 载入证书 (certificate)\n" #~ msgid "Trying without the specified certificate\n" #~ msgstr "尝试不载入指定的证书 (certificate)\n" #~ msgid "Failed to get certificate key from %s\n" #~ msgstr "无法从 %s 获取证书密钥\n" #~ msgid "End of file while parsing headers.\n" #~ msgstr "正在分析文件头时，文件已结束。\n" #~ msgid "" #~ "\n" #~ "Continued download failed on this file, which conflicts with `-c'.\n" #~ "Refusing to truncate existing file `%s'.\n" #~ "\n" #~ msgstr "" #~ "\n" #~ "无法续传此文件，与“-c”选项的意义冲突。\n" #~ "不会截短已存在的文件“%s”。\n" #~ "\n" #~ msgid " (%s to go)" #~ msgstr " (尚有 %s)" #~ msgid "File `%s' already there, will not retrieve.\n" #~ msgstr "文件“%s”已经存在，不会获取。\n" #~ msgid "" #~ "%s (%s) - `%s' saved [%ld/%ld])\n" #~ "\n" #~ msgstr "" #~ "%s (%s) -- 已保存“%s”[%ld/%ld])\n" #~ "\n" #~ msgid "%s (%s) - Connection closed at byte %ld/%ld. " #~ msgstr "%s (%s) - 连接在 %ld/%ld 字节时被关闭。" #~ msgid "%s: %s: Invalid boolean `%s', use always, on, off, or never.\n" #~ msgstr "%s：%s：无效的布尔值“%s”，请使用 always、on、off 或 never。\n" #~ msgid "" #~ "Startup:\n" #~ " -V, --version display the version of Wget and exit.\n" #~ " -h, --help print this help.\n" #~ " -b, --background go to background after startup.\n" #~ " -e, --execute=COMMAND execute a `.wgetrc'-style command.\n" #~ "\n" #~ msgstr "" #~ "启动：\n" #~ " -V, --version 显示 Wget 的版本并且退出。\n" #~ " -h, --help 打印此帮助。\n" #~ " -b, -background 启动后进入后台操作。\n" #~ " -e, -execute=COMMAND 运行‘.wgetrc’形式的命令。\n" #~ "\n" #~ msgid "" #~ "Logging and input file:\n" #~ " -o, --output-file=FILE log messages to FILE.\n" #~ " -a, --append-output=FILE append messages to FILE.\n" #~ " -d, --debug print debug output.\n" #~ " -q, --quiet quiet (no output).\n" #~ " -v, --verbose be verbose (this is the default).\n" #~ " -nv, --non-verbose turn off verboseness, without being quiet.\n" #~ " -i, --input-file=FILE download URLs found in FILE.\n" #~ " -F, --force-html treat input file as HTML.\n" #~ " -B, --base=URL prepends URL to relative links in -F -i " #~ "file.\n" #~ "\n" #~ msgstr "" #~ "日志记录及输入文件：\n" #~ " -o, --output-file=文件 将日志消息写入到指定文件中。\n" #~ " -a, --append-output=文件 将日志消息追加到指定文件的末端。\n" #~ " -d, --debug 打印调试输出。\n" #~ " -q, --quiet 安静模式(不输出信息)。\n" #~ " -v, --verbose 详细输出模式(默认)。\n" #~ " -nv, --non-verbose 关闭详细输出模式，但不进入安静模式。\n" #~ " -i, --input-file=文件 下载从指定文件中找到的 URL。\n" #~ " -F, --force-html 以 HTML 方式处理输入文件。\n" #~ " -B, --base=URL 使用 -F -i 文件选项时，在相对链接前添加指定" #~ "的 URL。\n" #~ "\n" #~ msgid "" #~ "Download:\n" #~ " -t, --tries=NUMBER set number of retries to NUMBER (0 " #~ "unlimits).\n" #~ " --retry-connrefused retry even if connection is refused.\n" #~ " -O --output-document=FILE write documents to FILE.\n" #~ " -nc, --no-clobber don't clobber existing files or use .# " #~ "suffixes.\n" #~ " -c, --continue resume getting a partially-downloaded " #~ "file.\n" #~ " --progress=TYPE select progress gauge type.\n" #~ " -N, --timestamping don't re-retrieve files unless newer than " #~ "local.\n" #~ " -S, --server-response print server response.\n" #~ " --spider don't download anything.\n" #~ " -T, --timeout=SECONDS set all timeout values to SECONDS.\n" #~ " --dns-timeout=SECS set the DNS lookup timeout to SECS.\n" #~ " --connect-timeout=SECS set the connect timeout to SECS.\n" #~ " --read-timeout=SECS set the read timeout to SECS.\n" #~ " -w, --wait=SECONDS wait SECONDS between retrievals.\n" #~ " --waitretry=SECONDS wait 1...SECONDS between retries of a " #~ "retrieval.\n" #~ " --random-wait wait from 0...2*WAIT secs between " #~ "retrievals.\n" #~ " -Y, --proxy=on/off turn proxy on or off.\n" #~ " -Q, --quota=NUMBER set retrieval quota to NUMBER.\n" #~ " --bind-address=ADDRESS bind to ADDRESS (hostname or IP) on local " #~ "host.\n" #~ " --limit-rate=RATE limit download rate to RATE.\n" #~ " --dns-cache=off disable caching DNS lookups.\n" #~ " --restrict-file-names=OS restrict chars in file names to ones OS " #~ "allows.\n" #~ "\n" #~ msgstr "" #~ "下载：\n" #~ " -t, --tries=次数 配置重试次数（0 表示无限）。\n" #~ " --retry-connrefused 即使拒绝连接也重试。\n" #~ " -O --output-document=文件 将数据写入此文件中。\n" #~ " -nc, --no-clobber 不更改已经存在的文件，也不使用在文件名后\n" #~ " 添加 .#（# 为数字）的方法写入新的文件。\n" #~ " -c, --continue 继续接收已下载了一部分的文件。\n" #~ " --progress=方式 选择下载进度的表示方式。\n" #~ " -N, --timestamping 除非远程文件较新，否则不再获取。\n" #~ " -S, --server-response 显示服务器回应消息。\n" #~ " --spider 不下载任何数据。\n" #~ " -T, --timeout=秒数 配置读取数据的超时时间 (秒数)。\n" #~ " -w, --wait=秒数 接收不同文件之间等待的秒数。\n" #~ " --waitretry=秒数 在每次重试之间稍等一段时间 (由 1 秒至指定" #~ "的 秒数不等)。\n" #~ " --random-wait 接收不同文件之间稍等一段时间(由 0 秒至 " #~ "2*WAIT 秒不等)。\n" #~ " -Y, --proxy=on/off 打开或关闭代理服务器。\n" #~ " -Q, --quota=大小 配置接收数据的限额大小。\n" #~ " --bind-address=地址 使用本机的指定地址 (主机名称或 IP) 进行连" #~ "接。\n" #~ " --limit-rate=速率 限制下载的速率。\n" #~ " --dns-cache=off 禁止查找存于高速缓存中的 DNS。\n" #~ " --restrict-file-names=OS 限制文件名中的字符为指定的 OS (操作系统) " #~ "所允许的字符。\n" #~ "\n" #~ msgid "" #~ "Directories:\n" #~ " -nd, --no-directories don't create directories.\n" #~ " -x, --force-directories force creation of directories.\n" #~ " -nH, --no-host-directories don't create host directories.\n" #~ " -P, --directory-prefix=PREFIX save files to PREFIX/...\n" #~ " --cut-dirs=NUMBER ignore NUMBER remote directory " #~ "components.\n" #~ "\n" #~ msgstr "" #~ "目录：\n" #~ " -nd --no-directories 不创建目录。\n" #~ " -x, --force-directories 强制创建目录。\n" #~ " -nH, --no-host-directories 不创建含有远程主机名称的目录。\n" #~ " -P, --directory-prefix=名称 保存文件前先创建指定名称的目录。\n" #~ " --cut-dirs=数目 忽略远程目录中指定数目的目录层。\n" #~ "\n" #~ msgid "" #~ "HTTP options:\n" #~ " --http-user=USER set http user to USER.\n" #~ " --http-passwd=PASS set http password to PASS.\n" #~ " -C, --cache=on/off (dis)allow server-cached data (normally " #~ "allowed).\n" #~ " -E, --html-extension save all text/html documents with .html " #~ "extension.\n" #~ " --ignore-length ignore `Content-Length' header field.\n" #~ " --header=STRING insert STRING among the headers.\n" #~ " --proxy-user=USER set USER as proxy username.\n" #~ " --proxy-passwd=PASS set PASS as proxy password.\n" #~ " --referer=URL include `Referer: URL' header in HTTP " #~ "request.\n" #~ " -s, --save-headers save the HTTP headers to file.\n" #~ " -U, --user-agent=AGENT identify as AGENT instead of Wget/VERSION.\n" #~ " --no-http-keep-alive disable HTTP keep-alive (persistent " #~ "connections).\n" #~ " --cookies=off don't use cookies.\n" #~ " --load-cookies=FILE load cookies from FILE before session.\n" #~ " --save-cookies=FILE save cookies to FILE after session.\n" #~ " --post-data=STRING use the POST method; send STRING as the " #~ "data.\n" #~ " --post-file=FILE use the POST method; send contents of FILE.\n" #~ "\n" #~ msgstr "" #~ "HTTP 选项：\n" #~ " --http-user=用户 配置 http 用户名。\n" #~ " --http-passwd=密码 配置 http 用户密码。\n" #~ " -C, --cache=on/off (不)使用服务器中的高速缓存中的数据 (默认是使" #~ "用的)。\n" #~ " -E, --html-extension 将所有 MIME 类型为 text/html 的文件都加上 ." #~ "html 扩展文件名。\n" #~ " --ignore-length 忽略“Content-Length”文件头字段。\n" #~ " --header=字符串 在文件头中添加指定字符串。\n" #~ " --proxy-user=用户 配置代理服务器用户名。\n" #~ " --proxy-passwd=密码 配置代理服务器用户密码。\n" #~ " --referer=URL 在 HTTP 请求中包含“Referer：URL”头。\n" #~ " -s, --save-headers 将 HTTP 头存入文件。\n" #~ " -U, --user-agent=AGENT 标志为 AGENT 而不是 Wget/VERSION。\n" #~ " --no-http-keep-alive 禁用 HTTP keep-alive（持久性连接）。\n" #~ " --cookies=off 禁用 cookie。\n" #~ " --load-cookies=文件 会话开始前由指定文件载入 cookie。\n" #~ " --save-cookies=文件 会话结束后将 cookie 保存至指定文件。\n" #~ " --post-data=字符串 使用 POST 方法，发送指定字符串。\n" #~ " --post-file=文件 使用 POST 方法，发送指定文件中的内容。\n" #~ "\n" #~ msgid "" #~ "HTTPS (SSL) options:\n" #~ " --sslcertfile=FILE optional client certificate.\n" #~ " --sslcertkey=KEYFILE optional keyfile for this certificate.\n" #~ " --egd-file=FILE file name of the EGD socket.\n" #~ " --sslcadir=DIR dir where hash list of CA's are stored.\n" #~ " --sslcafile=FILE file with bundle of CA's\n" #~ " --sslcerttype=0/1 Client-Cert type 0=PEM (default) / 1=ASN1 " #~ "(DER)\n" #~ " --sslcheckcert=0/1 Check the server cert agenst given CA\n" #~ " --sslprotocol=0-3 choose SSL protocol; 0=automatic,\n" #~ " 1=SSLv2 2=SSLv3 3=TLSv1\n" #~ "\n" #~ msgstr "" #~ "HTTPS (SSL) 选项：\n" #~ " --sslcertfile=文件 可选的客户段端证书。\n" #~ " --sslcertkey=密钥文件 对此证书可选的“密钥文件”。\n" #~ " --egd-file=文件 EGD socket 文件名。\n" #~ " --sslcadir=目录 CA 散列表所在的目录。\n" #~ " --sslcafile=文件 包含 CA 的文件。\n" #~ " --sslcerttype=0/1 Client-Cert 类型 0=PEM (默认) / 1=ASN1 " #~ "(DER)\n" #~ " --sslcheckcert=0/1 根据提供的 CA 检查服务器的证书\n" #~ " --sslprotocol=0-3 选择 SSL 协议；0=自动选择，\n" #~ " 1=SSLv2 2=SSLv3 3=TLSv1\n" #~ "\n" #~ msgid "" #~ "FTP options:\n" #~ " -nr, --dont-remove-listing don't remove `.listing' files.\n" #~ " -g, --glob=on/off turn file name globbing on or off.\n" #~ " --passive-ftp use the \"passive\" transfer mode.\n" #~ " --retr-symlinks when recursing, get linked-to files (not " #~ "dirs).\n" #~ "\n" #~ msgstr "" #~ "FTP 选项：\n" #~ " -nr, --dont-remove-listing 不删除“.listing”文件。\n" #~ " -g, --glob=on/off 设置是否展开有通配符的文件名。\n" #~ " --passive-ftp 使用“被动”传输模式。\n" #~ " --retr-symlinks 在递归模式中，下载链接所指示的文件(连至目" #~ "录\n" #~ " 则例外）。\n" #~ msgid "" #~ "Recursive retrieval:\n" #~ " -r, --recursive recursive download.\n" #~ " -l, --level=NUMBER maximum recursion depth (inf or 0 for " #~ "infinite).\n" #~ " --delete-after delete files locally after downloading them.\n" #~ " -k, --convert-links convert non-relative links to relative.\n" #~ " -K, --backup-converted before converting file X, back up as X.orig.\n" #~ " -m, --mirror shortcut option equivalent to -r -N -l inf -" #~ "nr.\n" #~ " -p, --page-requisites get all images, etc. needed to display HTML " #~ "page.\n" #~ " --strict-comments turn on strict (SGML) handling of HTML " #~ "comments.\n" #~ "\n" #~ msgstr "" #~ "递归下载：\n" #~ " -r, --recursive 递归下载。\n" #~ " -l, --level=数字 最大递归深度(inf 或 0 表示无限)。\n" #~ " --delete-after 删除下载后的文件。\n" #~ " -k, --convert-links 将绝对链接转换为相对链接。\n" #~ " -K, --backup-converted 转换文件 X 前先将其备份为 X.orig。\n" #~ " -m, --mirror 等效于 -r -N -l inf -nr 的选项。\n" #~ " -p, --page-requisites 下载所有显示完整网页所需的文件，例如图像。\n" #~ " --strict-comments 打开对 HTML 备注的严格(SGML)处理选项。\n" #~ "\n" #~ msgid "" #~ "Recursive accept/reject:\n" #~ " -A, --accept=LIST comma-separated list of accepted " #~ "extensions.\n" #~ " -R, --reject=LIST comma-separated list of rejected " #~ "extensions.\n" #~ " -D, --domains=LIST comma-separated list of accepted " #~ "domains.\n" #~ " --exclude-domains=LIST comma-separated list of rejected " #~ "domains.\n" #~ " --follow-ftp follow FTP links from HTML " #~ "documents.\n" #~ " --follow-tags=LIST comma-separated list of followed HTML " #~ "tags.\n" #~ " -G, --ignore-tags=LIST comma-separated list of ignored HTML " #~ "tags.\n" #~ " -H, --span-hosts go to foreign hosts when recursive.\n" #~ " -L, --relative follow relative links only.\n" #~ " -I, --include-directories=LIST list of allowed directories.\n" #~ " -X, --exclude-directories=LIST list of excluded directories.\n" #~ " -np, --no-parent don't ascend to the parent " #~ "directory.\n" #~ "\n" #~ msgstr "" #~ "递归下载时有关接受/拒绝的选项：\n" #~ " -A, --accept=列表 接受的文件样式列表，以逗号分隔。\n" #~ " -R, --reject=列表 排除的文件样式列表，以逗号分隔。\n" #~ " -D, --domains=列表 接受的域列表，以逗号分隔。\n" #~ " --exclude-domains=列表 排除的域列表，以逗号分隔。\n" #~ " --follow-ftp 跟随 HTML 文件中的 FTP 链接。\n" #~ " --follow-tags=列表 要跟随的 HTML 标记，以逗号分隔。\n" #~ " -G, --ignore-tags=列表 要忽略的 HTML 标记，以逗号分隔。\n" #~ " -H, --span-hosts 递归时可进入其它主机。\n" #~ " -L, --relative 只跟随相对链接。\n" #~ " -I, --include-directories=列表 要下载的目录列表。\n" #~ " -X, --exclude-directories=列表 要排除的目录列表。\n" #~ " -np, --no-parent 不搜索上层目录。\n" #~ "\n" #~ msgid "" #~ "This program is distributed in the hope that it will be useful,\n" #~ "but WITHOUT ANY WARRANTY; without even the implied warranty of\n" #~ "MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" #~ "GNU General Public License for more details.\n" #~ msgstr "" #~ "此程序发布的目的是希望它会有用，但它不作任何保证；\n" #~ "甚至没有可售性或适用于特定目的的保证。\n" #~ "详情请查看 GNU General Public License。\n" #~ msgid "Starting WinHelp %s\n" #~ msgstr "正在启动 WinHelp %s\n" #~ msgid "Empty host" #~ msgstr "未指定主机" #~ msgid "%s: %s: Not enough memory.\n" #~ msgstr "%s：%s：内存不足。\n" #~ msgid "Syntax error in Set-Cookie at character `%c'.\n" #~ msgstr "在 Set-Cookie 中字符“%c”处出现语法错误。\n" #~ msgid "%s: %s: Cannot convert `%s' to an IP address.\n" #~ msgstr "%s：%s：无法将“%s”转换为一个 IP 地址。\n" #~ msgid "%s: %s: invalid command\n" #~ msgstr "%s：%s：无效的命令\n" #~ msgid "%s: Redirection cycle detected.\n" #~ msgstr "%s：重定向到自己。\n"