Index of /internal/projects/901606_Park_n_Fly_AUV/Mechanical/Drawings/Dorado AUV/Midbody

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]3.4dia.sldprt2015-07-16 08:56 48K 
[ ]4 stage gearbox.SLDASM2016-04-06 09:10 80K 
[ ]5_16-18UNC SCREW ASSY.SLDASM2016-04-06 09:10 113K 
[ ]11 kg lead block.SLDPRT2016-04-06 09:23 60K 
[ ]305D0010.sldprt2015-07-16 08:56 21K 
[ ]810-4006-00.sldprt2015-07-16 08:56 22K 
[ ]811-4007-00.sldprt2015-07-15 15:17 198K 
[ ]817-1067-00_B18.3.6M - M5 x 0.8 x 4 Hex Socket Flat Pt. SS --S.sldprt2015-07-16 08:56 32K 
[ ]817-1146-00.sldprt2015-07-16 08:56 25K 
[ ]817-4013.sldprt2015-07-16 08:56 35K 
[ ]817-4125.sldprt2015-07-16 08:56 164K 
[ ]817 1229.sldprt2015-07-16 08:56 212K 
[ ]5011T370.SLDPRT2016-07-12 09:09 3.1M 
[ ]92196A164.SLDPRT2015-07-20 08:40 598K 
[ ]98164A107.SLDPRT2016-07-12 09:09 607K 
[ ]10021072rA_SOLID-MODEL.SLDPRT2015-07-20 08:40 280K 
[ ]100210301-1ra_tdghcontroller.SLDPRT2015-04-28 10:26 1.1M 
[ ]100210302-2ra_tdghinterface.SLDPRT2015-04-28 10:26 893K 
[ ]A-201xxx-12_TurbulenceNoseShellAssem.sldasm2016-04-06 09:10 383K 
[ ]Alignment Pin.SLDPRT2015-07-20 08:40 136K 
[ ]Assem4.SLDASM2016-04-06 09:10 1.3M 
[ ]BURN WIRE, PARALLEL.SLDPRT2014-04-02 22:35 224K 
[ ]BURN WIRE ASSY.SLDASM2016-04-06 09:10 155K 
[ ]Barrel Nut .25-20 thd .5 in. x 1 in..SLDPRT2015-04-28 10:27 154K 
[ ]Bottom Bulkheads Camera And DVL.SLDPRT2016-04-06 09:10 194K 
[ ]Burn and cut drop weight trigger.SLDASM2016-09-09 12:56 88K 
[ ]CA87-0004 M12 Camera Shell File.SLDPRT2015-04-30 11:40 636K 
[ ]CANON 50ml Sampler Rev B.SLDASM2016-04-06 09:10 2.9M 
[ ]Cathx_J_Bottle.SLDASM2016-07-21 16:38 4.9M 
[ ]Conn,LPMBH-7-MP-1,Impulse_CONNECTOR-DETAIL.sldprt2015-07-16 08:56 127K 
[ ]DGH HOUSING ENDCAP1.SLDPRT2016-07-21 16:38 753K 
[ ]DGH PCB Mount.SLDPRT2016-07-12 09:09 186K 
[ ]DROPWEIGHT LATCH.SLDPRT2015-04-28 10:27 44K 
[ ]DSPL_Bracket.SLDPRT2015-04-28 10:27 283K 
[ ]DVL-WHN300I_3km.SLDASM2016-04-06 09:10 720K 
[ ]DVL Bracket Bottom.SLDPRT2015-04-29 16:10 133K 
[ ]DVLBracketTall1.SLDPRT2015-07-17 12:45 133K 
[ ]DVLBracketTall2.SLDPRT2015-07-16 15:27 161K 
[ ]DVLBracketTall3.SLDPRT2016-04-06 09:10 146K 
[ ]DVL Bracket Top.SLDPRT2015-04-29 16:10 163K 
[ ]DVL Head-WHN300HP.SLDPRT2015-04-28 10:27 213K 
[ ]DVL Housing-WHN300I_3km.SLDPRT2015-04-28 10:27 1.1M 
[ ]DVLTall.SLDASM2016-04-06 09:11 1.8M 
[ ]DVL and Bracket Assembly Tall DVL.SLDASM2016-04-06 09:10 1.8M 
[ ]DVL dummy guts.SLDPRT2015-04-28 10:27 61K 
[ ]Die.SLDPRT2015-07-20 08:40 101K 
[ ]Drive Shaft.SLDPRT2015-07-20 08:40 81K 
[ ]DropWeight Large Diameter.SLDPRT2015-04-28 10:27 148K 
[ ]Drop weight Assembly.SLDASM2016-04-06 09:10 101K 
[ ]Drop weight body.SLDPRT2015-04-28 10:27 69K 
[ ]DummyPlug,LPMDC-7-FS,Impulse.sldprt2015-07-16 08:56 35K 
[ ]EC32fl-267121.SLDPRT2015-07-20 08:40 143K 
[ ]ECO -D.SLDPRT2015-04-24 17:29 370K 
[ ]END CAST, BURN WIRE.SLDPRT2014-04-02 22:35 116K 
[ ]End Cap.SLDPRT2015-07-20 08:40 218K 
[ ]Extened Nose with fin.SLDPRT2015-07-20 08:40 337K 
[ ]FLANGED BUSHING.SLDPRT2016-07-21 16:38 69K 
[ ]FLAT HEAD SCREW.SLDPRT2015-04-28 10:27 63K 
[ ]Flat Washer Type A Selected Wide_AI.sldprt2015-04-28 10:27 45K 
[ ]Frangibolt Actuator FC2-16-31SR2.SLDPRT2012-04-12 08:45 490K 
[ ]Frangibolt Base.SLDPRT2012-04-12 08:45 202K 
[ ]Frangibolt Fastener 1.SLDPRT2012-04-12 08:45 170K 
[ ]Front Manifold Rev C.SLDPRT2015-07-20 08:40 605K 
[ ]GP32A.sldprt2015-07-20 08:40 38K 
[ ]Guillotine DW Frame.SLDPRT2015-04-28 10:27 240K 
[ ]Guillotine filliment1.SLDPRT2015-04-28 10:27 256K 
[ ]Heavy Hex Jam Nut_AI.sldprt2015-04-28 10:27 88K 
[ ]IAUV Flat Washer Type A Wide_AI.sldprt2016-07-21 16:38 62K 
[ ]IAUV Hex Bolt_AI.SLDPRT2015-07-23 16:07 187K 
[ ]IAUV Lifting Beam Ti End Plate.SLDPRT2016-07-21 16:38 169K 
[ ]IAUV Main Foam Pack.SLDASM2016-07-21 16:38 180K 
[ ]IAUV Ti. Lifting beam tee.SLDPRT2015-04-28 10:27 40K 
[ ]IAUV Ti Lifting Beam Assy.SLDASM2016-07-21 16:38 262K 
[ ]IBAUV 0 PARALLEL SHELL MOLD.SLDPRT2011-02-17 12:44 140K 
[ ]IBAUV 1 PARALLEL SHELL BASE PART.SLDPRT2016-04-06 09:10 206K 
[ ]IBAUV 1 PARALLEL SHELL FLANGE BASE PART.SLDPRT2012-09-19 15:47 189K 
[ ]IBAUV 1 PARALLEL SHELL FLANGE TOP PART.SLDPRT2016-04-06 09:10 163K 
[ ]IBAUV C-CHANNEL.SLDPRT2016-07-21 16:38 435K 
[ ]IBAUV FLANGE, PARALLEL, BOTTOM.sldasm2016-04-06 09:10 136K 
[ ]IBAUV FLANGE, PARALLEL, TOP.sldasm2016-07-21 16:38 85K 
[ ]IBAUV HEX FLANGED INSERTRevB.SLDPRT2015-04-28 10:27 61K 
[ ]IBAUVMidBody.SLDASM2016-04-06 09:10 8.1M 
[ ]IBAUVMidBody2.SLDASM2016-09-09 12:56 140K 
[ ]IBAUV Midbody Foam Bulkhead.SLDPRT2016-04-06 09:10 173K 
[ ]IBAUV PLANE BUSHING.SLDPRT2015-04-28 10:27 49K 
[ ]IBAUV SHELL INSERT RING.sldprt2015-04-28 10:27 260K 
[ ]IBAUV TOP PARALLEL SHELL.SLDPRT2016-07-21 16:38 188K 
[ ]IB MB DW Plate.SLDPRT2015-04-28 10:27 202K 
[ ]Iceberg Weight Cage.SLDPRT2015-04-28 10:27 175K 
[ ]Iceberg Weight Cage flat top.SLDPRT2015-04-28 10:27 152K 
[ ]ImpulseLPBH-7-MP.sldprt2015-04-28 10:27 106K 
[ ]Impulse_MCBH(WB)-3-MP SS.SLDPRT2015-07-20 08:40 262K 
[ ]Inside sheer body.SLDPRT2015-04-28 10:27 92K 
[ ]KEY .75SQ.SLDPRT2015-05-18 14:15 273K 
[ ]KEY ASSEMBLY.SLDASM2016-04-06 09:28 81K 
[ ]L-LEVER.SLDPRT2015-04-28 10:27 64K 
[ ]Lure valve.SLDPRT2015-07-20 08:40 163K 
[ ]M8 FHSHCS 93395A407.SLDPRT2015-04-28 10:26 575K 
[ ]M400M1b.SLDPRT2015-07-20 08:40 464K 
[ ]MBProjectorMount1.SLDPRT2015-05-18 14:18 268K 
[ ]Magnet.SLDPRT2015-07-20 08:40 91K 
[ ]Main Body 50 ml Rev B.SLDPRT2015-07-20 08:40 344K 
[ ]Mapper_Recovery_Hook_2.SLDPRT2015-06-24 16:01 398K 
[ ]Mapper_Recovery_Hook_3.SLDASM2016-07-21 16:38 136K 
[ ]Mapper_Recovery_Hook_Gate.SLDPRT2016-07-21 16:38 175K 
[ ]MidBody.SLDASM2009-11-10 11:09 4.4M 
[ ]Mid Section Drop Weight.SLDASM2016-09-09 12:56 42K 
[ ]MidbobyBulkhead1.SLDPRT2016-07-21 16:38 458K 
[ ]MoCap 2in ID silicone cap.SLDPRT2015-07-20 08:40 63K 
[ ]Motor Drive.SLDASM2016-04-06 09:10 1.4M 
[ ]MultibeamProjectorBox1.SLDASM2016-07-21 16:38 390K 
[ ]NUT, HEX, MACHINE, .31.SLDPRT2015-04-28 10:27 59K 
[ ]NUT, Hex, M8_NUT, Hex, M8.sldprt2015-07-16 08:56 32K 
[ ]Omnitron Ethernet Switch.SLDPRT2016-07-12 09:09 176K 
[ ]Outside Tube.SLDPRT2015-07-20 08:40 216K 
[ ]P-200514-08_NoseShellMountRing.sldprt2014-04-02 17:38 626K 
[ ]P-201142-11_TurbMntRng.sldprt2015-07-20 08:40 91K 
[ ]P-201276-11 LRAUV Pop-off nose spool.SLDPRT2012-04-12 08:45 289K 
[ ]P-201277-11.sldprt2012-04-12 08:45 1.4M 
[ ]P-201552-13 IBAUV Midbody Shell.SLDASM2016-07-21 16:38 460K 
[ ]P-201557-13 IBAUV Midbody Foam Forward.SLDPRT2015-04-28 10:27 121K 
[ ]P-201558-13 IBAUV Midbody Foam Center.SLDPRT2015-04-28 10:27 153K 
[ ]P-201559-13 IBAUV Midbody Foam Aft.SLDPRT2015-04-28 10:27 160K 
[ ]P-201588 IBAUV Midbody Shell Rail.SLDPRT2016-04-06 09:10 172K 
[ ]P-201610-14 IBAUV Wetlabs Bracket.sldprt2015-04-28 10:28 149K 
[ ]P-201635-14.sldprt2015-07-20 08:40 337K 
[ ]P-201760-15 IBAUV Cathx Jbox bracket.sldprt2015-08-21 14:15 224K 
[ ]P-201766-15.sldprt2016-07-12 09:09 137K 
[ ]P 201277 .25 in. Spectra Line 50 ft. Layer 2.SLDPRT2011-12-09 16:24 1.5M 
[ ]PATZ Nose shell.sldprt2015-07-20 08:40 320K 
[ ]PIN, DOWEL, .1875 NOM, X .50L.SLDPRT2016-07-21 16:38 60K 
[ ]Pop Off Nose Assembly.SLDASM2016-04-06 09:10 1.2M 
[ ]Pop Off Nose Shell Assembly.SLDASM2012-01-19 15:28 3.0M 
[ ]Pop Off Nose Spool Assembly.SLDASM2016-04-06 09:10 2.3M 
[ ]Pop Off Nosecone Cap.SLDPRT2016-04-06 09:11 211K 
[ ]Pop Off Nosecone Line Spool.SLDPRT2016-04-06 09:10 539K 
[ ]RESON TC2160 Projector.SLDPRT2015-04-28 10:26 359K 
[ ]Rails.SLDASM2016-07-21 16:38 326K 
[ ]Rear Bulkhead.SLDPRT2015-07-20 08:40 175K 
[ ]Rear Manifold.SLDPRT2015-07-20 08:40 394K 
[ ]Reson Electronics Housing Mockup.SLDPRT2015-04-28 10:26 315K 
[ ]ResonProjectorMountingTab1.SLDPRT2016-07-21 16:38 318K 
[ ]Reson Projector top mount plate.SLDPRT2013-09-04 13:47 412K 
[ ]Reson TC2160 Projector Assy.SLDASM2016-04-06 09:10 587K 
[ ]Reson_6.8_inchbottle_assy.SLDASM2016-04-06 09:10 405K 
[ ]SCREW, CAP, SKT, .190-24UNC-2A X .50L.SLDPRT2015-04-28 10:27 47K 
[ ]SLEEVE, BURN WIRE.SLDPRT2014-04-02 22:35 176K 
[ ]SLOTTED NUT.SLDPRT2015-04-28 10:27 76K 
[ ]SL_DVL_with Brackets.SLDASM2016-04-06 09:11 664K 
[ ]SPACER, BURN WIRE MECHANISM.SLDPRT2015-04-28 10:27 33K 
[ ]STOP SLEEVE.SLDPRT2014-04-02 22:35 98K 
[ ]SWING WASHER.SLDPRT2013-04-04 16:29 169K 
[ ]Sample Chamber.SLDASM2016-04-06 09:10 600K 
[ ]Screw, M4x12_Screw, M4x12.sldprt2015-07-16 08:56 35K 
[ ]Screw,M5x0,8x13CSK_B18.6.7M - M5 x 0.8 x 13 Type I Cross Recessed FHMS --13S.sldprt2015-07-16 08:56 33K 
[ ]Screw,M8x1.25x40SH_B18.3.1M - 8 x 1.25 x 40 Hex SHCS -- 28NHX.sldprt2015-07-16 08:56 42K 
[ ]SeaCon_MINK-BCR.SLDPRT2016-07-12 09:09 73K 
[ ]Seabird.SLDPRT2014-04-02 12:02 169K 
[ ]Seacon_MINK10-CCPL.SLDPRT2016-07-12 09:09 51K 
[ ]Shaft Extension.SLDPRT2015-07-20 08:40 146K 
[ ]Sheer Disk.SLDPRT2015-04-28 10:27 39K 
[ ]Socket Head Cap Screws (U.S.).SLDPRT2015-09-30 16:26 791K 
[ ]Subconn_MCBH6M.SLDPRT2016-10-07 15:38 132K 
[ ]Subconn_MCBH8F.SLDPRT2015-04-28 10:26 270K 
[ ]Subconn_MCBH12F.SLDPRT2015-04-28 10:26 241K 
[ ]Subconn_MCBHRA6MSS.SLDPRT2015-04-21 16:50 204K 
[ ]TCS_M400_Pump_Housing.SLDASM2016-04-06 09:10 764K 
[ ]THREADED ROD.SLDPRT2015-04-28 10:27 50K 
[ ]Thumbs.db2022-02-10 12:44 88K 
[ ]Ti. Lifting Eye.SLDPRT2015-04-28 10:27 126K 
[ ]Ti. Lifting beam.SLDPRT2015-04-29 13:46 127K 
[ ]User Library-ELECT_WAGO_DIN_RAIL_210-112.SLDPRT2015-09-24 13:47 122K 
[ ]WASHER, LOCK, HLCL SPR, .190 NOM, REG DUTY.sldprt2015-04-29 13:46 258K 
[ ]WASHER 5_16.SLDPRT2015-04-28 10:27 39K 
[ ]WHISTLE.SLDPRT2015-07-20 08:40 811K 
[ ]Washer,Lock,.375_Regular LW 0.375.sldprt2015-07-16 08:56 22K 
[ ]Washer,M8,smod_Washer,M8,smod.sldprt2015-07-16 08:56 21K 
[ ]Washer, SAE #6.SLDPRT2014-04-02 22:35 103K 
[ ]Wear Spacer.SLDPRT2015-07-20 08:40 68K 
[ ]WetLabs ECO_FLNTURTD.SLDASM2016-04-06 09:10 257K 
[ ]battery Housing.SLDPRT2016-07-12 09:09 94K 
[ ]canon ez holder.SLDPRT2015-07-20 08:40 72K 
[ ]canon motor housing base plate.SLDPRT2015-07-20 08:40 433K 
[ ]dgh clamp.SLDPRT2016-07-12 09:09 112K 
[ ]dgh module.SLDPRT2015-04-28 10:26 122K 
[ ]dgh module base plate.SLDPRT2015-04-28 10:26 133K 
[ ]dgh standoff.SLDPRT2015-04-28 10:26 38K 
[ ]guillotine stopper.SLDPRT2015-04-28 10:27 100K 
[ ]mcbh6f-2-o-ring-20mm-hex.SLDPRT2016-07-12 09:09 1.0M 
[ ]mcbh8f-2-o-ring-20mm-hex.SLDPRT2016-07-12 09:09 2.4M 
[ ]motor housing1.SLDPRT2015-07-20 08:40 503K 
[ ]socket head cap screw_ai.sldprt2015-08-06 20:18 74K 
[ ]subconn conn.SLDPRT2015-04-28 10:26 73K 
[ ]temp term block.SLDPRT2015-09-22 17:15 65K 
[ ]temp term block2.SLDPRT2016-07-12 09:08 60K 
[ ]~$5_16-18UNC SCREW ASSY.SLDASM2016-04-06 09:36 7  
[ ]~$Burn and cut drop weight trigger.SLDASM2017-01-26 09:13 7  
[ ]~$DROPWEIGHT LATCH.SLDPRT2016-04-06 09:36 7  
[ ]~$DSPL_Bracket.SLDPRT2016-04-06 09:36 7  
[ ]~$DropWeight Large Diameter.SLDPRT2016-04-06 09:36 7  
[ ]~$Drop weight Assembly.SLDASM2016-04-06 09:36 7  
[ ]~$Drop weight body.SLDPRT2016-04-06 09:36 7  
[ ]~$Flat Washer Type A Selected Wide_AI.sldprt2016-04-06 09:36 7  
[ ]~$Guillotine DW Frame.SLDPRT2016-04-06 09:36 7  
[ ]~$Guillotine filliment1.SLDPRT2016-04-06 09:36 7  
[ ]~$Heavy Hex Jam Nut_AI.sldprt2016-04-06 09:36 7  
[ ]~$IAUV Hex Bolt_AI.SLDPRT2016-04-06 09:36 7  
[ ]~$IAUV Ti. Lifting beam tee.SLDPRT2016-04-06 09:36 7  
[ ]~$IBAUVMidBody2.SLDASM2017-01-26 09:13 7  
[ ]~$IBAUV Midbody Foam Bulkhead.SLDPRT2016-04-06 09:36 7  
[ ]~$Iceberg Weight Cage.SLDPRT2016-04-06 09:36 7  
[ ]~$Iceberg Weight Cage flat top.SLDPRT2016-04-06 09:36 7  
[ ]~$Inside sheer body.SLDPRT2016-04-06 09:36 7  
[ ]~$L-LEVER.SLDPRT2016-04-06 09:36 7  
[ ]~$M8 FHSHCS 93395A407.SLDPRT2016-04-06 09:36 7  
[ ]~$MBProjectorMount1.SLDPRT2016-04-06 09:36 7  
[ ]~$Mapper_Recovery_Hook_2.SLDPRT2016-04-06 09:36 7  
[ ]~$Mid Section Drop Weight.SLDASM2017-01-26 09:13 7  
[ ]~$NUT, HEX, MACHINE, .31.SLDPRT2016-04-06 09:36 7  
[ ]~$P-200514-08_NoseShellMountRing.sldprt2016-04-28 13:06 7  
[ ]~$P-201557-13 IBAUV Midbody Foam Forward.SLDPRT2016-04-06 09:36 7  
[ ]~$P-201558-13 IBAUV Midbody Foam Center.SLDPRT2016-04-06 09:36 7  
[ ]~$P-201559-13 IBAUV Midbody Foam Aft.SLDPRT2016-04-06 09:36 7  
[ ]~$RESON TC2160 Projector.SLDPRT2016-04-06 09:36 7  
[ ]~$Reson Electronics Housing Mockup.SLDPRT2016-04-06 09:36 7  
[ ]~$Reson TC2160 Projector Assy.SLDASM2016-04-06 09:36 7  
[ ]~$Reson_6.8_inchbottle_assy.SLDASM2016-04-06 09:36 7  
[ ]~$SCREW, CAP, SKT, .190-24UNC-2A X .50L.SLDPRT2016-04-06 09:36 7  
[ ]~$SLOTTED NUT.SLDPRT2016-04-06 09:36 7  
[ ]~$SPACER, BURN WIRE MECHANISM.SLDPRT2016-04-06 09:36 7  
[ ]~$Sheer Disk.SLDPRT2016-04-06 09:36 7  
[ ]~$Subconn_MCBH8F.SLDPRT2016-04-06 09:36 7  
[ ]~$Subconn_MCBH12F.SLDPRT2016-04-06 09:36 7  
[ ]~$THREADED ROD.SLDPRT2016-04-06 09:36 7  
[ ]~$Ti. Lifting beam.SLDPRT2016-04-06 09:36 7  
[ ]~$WASHER, LOCK, HLCL SPR, .190 NOM, REG DUTY.sldprt2017-01-26 09:13 7  
[ ]~$WASHER 5_16.SLDPRT2016-04-06 09:36 7  
[ ]~$guillotine stopper.SLDPRT2016-04-06 09:36 7  
Apache/2.4.52 (Ubuntu) Server at docs.mbari.org Port 80