/**
  @Generated PIC24 / dsPIC33 / PIC32MM MCUs Source File

  @Company:
    Microchip Technology Inc.

  @File Name:
    clock.c

  @Summary:
    This is the clock.c file generated using PIC24 / dsPIC33 / PIC32MM MCUs

  @Description:
    This header file provides implementations for driver APIs for all modules selected in the GUI.
    Generation Information :
        Product Revision  :  PIC24 / dsPIC33 / PIC32MM MCUs - 1.171.0
        Device            :  PIC24FV32KA302
    The generated drivers are tested against the following:
        Compiler          :  XC16 v1.70
        MPLAB             :  MPLAB X v5.50
*/

/*
    (c) 2020 Microchip Technology Inc. and its subsidiaries. You may use this
    software and any derivatives exclusively with Microchip products.

    THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES, WHETHER
    EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE, INCLUDING ANY IMPLIED
    WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, AND FITNESS FOR A
    PARTICULAR PURPOSE, OR ITS INTERACTION WITH MICROCHIP PRODUCTS, COMBINATION
    WITH ANY OTHER PRODUCTS, OR USE IN ANY APPLICATION.

    IN NO EVENT WILL MICROCHIP BE LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE,
    INCIDENTAL OR CONSEQUENTIAL LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND
    WHATSOEVER RELATED TO THE SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS
    BEEN ADVISED OF THE POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE
    FULLEST EXTENT ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN
    ANY WAY RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
    THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.

    MICROCHIP PROVIDES THIS SOFTWARE CONDITIONALLY UPON YOUR ACCEPTANCE OF THESE
    TERMS.
*/

#include <stdint.h>
#include "xc.h"
#include "clock.h"

void CLOCK_Initialize(void)
{
    // RCDIV FRC/2; DOZE 1:8; DOZEN disabled; ROI disabled; 
    CLKDIV = 0x3100;
    // TUN Center frequency; 
    OSCTUN = 0x00;
    // ROEN disabled; ROSEL FOSC; RODIV 0; ROSSLP disabled; 
    REFOCON = 0x00;
    // ADC1MD enabled; T3MD enabled; T4MD enabled; T1MD enabled; U2MD enabled; T2MD enabled; U1MD enabled; SPI2MD enabled; SPI1MD enabled; T5MD enabled; I2C1MD enabled; 
    PMD1 = 0x00;
    // IC3MD enabled; OC1MD enabled; IC2MD enabled; OC2MD enabled; IC1MD enabled; OC3MD enabled; 
    PMD2 = 0x00;
    // RTCCMD enabled; CMPMD enabled; CRCPMD enabled; I2C2MD enabled; 
    PMD3 = 0x00;
    // EEMD enabled; CTMUMD enabled; REFOMD enabled; ULPWUMD enabled; HLVDMD enabled; 
    PMD4 = 0x00;
    // CF no clock failure; NOSC PRI; SOSCEN disabled; CLKLOCK unlocked; OSWEN Switch is Complete; 
    __builtin_write_OSCCONH((uint8_t) (0x02));
    __builtin_write_OSCCONL((uint8_t) (0x00));
}