ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('97-3102A-18_SW0001','2011-06-13T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2005450', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2005450','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#14785=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#14786=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#14787=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#14786);
#14788=(CONVERSION_BASED_UNIT('INCH',#14787)LENGTH_UNIT()NAMED_UNIT(#14785));
#14789=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#14790=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#14791=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #14790);
#14792=(CONVERSION_BASED_UNIT('DEGREE',#14791)NAMED_UNIT(#14789)PLANE_ANGLE_UNIT());
#14793=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#14794=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.187063809256E-4),#14788, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#14795=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #14794))GLOBAL_UNIT_ASSIGNED_CONTEXT((#14788,#14792,#14793))REPRESENTATION_CONTEXT('ID1','3'));
#14797=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#14798=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#14797);
#14799=DESIGN_CONTEXT('',#14797,'design');
#14800=MECHANICAL_CONTEXT('',#14797,'mechanical');
#14801=PRODUCT('97-3102A-18_SW0001','97-3102A-18_SW0001','NOT SPECIFIED', (#14800));
#14802=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #14801,.MADE.);
#14806=PRODUCT_CATEGORY('part','');
#14807=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#14801));
#14803=PRODUCT_DEFINITION('design','',#14802,#14799);
#14804=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 97-3102A-18_SW0001.',#14803);
ENDSEC;
END-ISO-10303-21;