ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('97-3102A-20_SW0001','2011-06-13T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2005450', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2005450','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#14776=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#14777=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#14778=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#14777);
#14779=(CONVERSION_BASED_UNIT('INCH',#14778)LENGTH_UNIT()NAMED_UNIT(#14776));
#14780=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#14781=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#14782=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #14781);
#14783=(CONVERSION_BASED_UNIT('DEGREE',#14782)NAMED_UNIT(#14780)PLANE_ANGLE_UNIT());
#14784=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#14785=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.369749047818E-4),#14779, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#14786=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #14785))GLOBAL_UNIT_ASSIGNED_CONTEXT((#14779,#14783,#14784))REPRESENTATION_CONTEXT('ID1','3'));
#14788=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#14789=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#14788);
#14790=DESIGN_CONTEXT('',#14788,'design');
#14791=MECHANICAL_CONTEXT('',#14788,'mechanical');
#14792=PRODUCT('97-3102A-20_SW0001','97-3102A-20_SW0001','NOT SPECIFIED', (#14791));
#14793=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #14792,.MADE.);
#14797=PRODUCT_CATEGORY('part','');
#14798=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#14792));
#14794=PRODUCT_DEFINITION('design','',#14793,#14790);
#14795=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 97-3102A-20_SW0001.',#14794);
ENDSEC;
END-ISO-10303-21;