ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('97-3102A-22_SW0001','2011-06-17T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2005450', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2005450','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#13952=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#13953=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#13954=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#13953);
#13955=(CONVERSION_BASED_UNIT('INCH',#13954)LENGTH_UNIT()NAMED_UNIT(#13952));
#13956=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#13957=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#13958=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #13957);
#13959=(CONVERSION_BASED_UNIT('DEGREE',#13958)NAMED_UNIT(#13956)PLANE_ANGLE_UNIT());
#13960=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#13961=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.369749047818E-4),#13955, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#13962=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #13961))GLOBAL_UNIT_ASSIGNED_CONTEXT((#13955,#13959,#13960))REPRESENTATION_CONTEXT('ID1','3'));
#13964=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#13965=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#13964);
#13966=DESIGN_CONTEXT('',#13964,'design');
#13967=MECHANICAL_CONTEXT('',#13964,'mechanical');
#13968=PRODUCT('97-3102A-22_SW0001','97-3102A-22_SW0001','NOT SPECIFIED', (#13967));
#13969=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #13968,.MADE.);
#13973=PRODUCT_CATEGORY('part','');
#13974=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#13968));
#13970=PRODUCT_DEFINITION('design','',#13969,#13966);
#13971=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 97-3102A-22_SW0001.',#13970);
ENDSEC;
END-ISO-10303-21;