PH CALIBRATION FILE GENERATED ON: 12/12/2023 08:29
DF 411
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 411, APEX# XXXX
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-9.70011e-12,1.85222e-08,-1.05126e-03, =k2(fP)*T
1.58922e-05, =k3*P^1
-2.88275e-08, =k4*P^2
2.79789e-11, =k5*P^3
-1.49911e-14, =k6*P^4
4.18684e-18, =k7*P^5
-4.70368e-22, =k8*P^6
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
12/05-12/08/2023	A		0.035					-9.70011e-12	1.85222e-08	-1.05126e-03	-1.39775	0.9998			-4.70368e-22	4.18684e-18	-1.49911e-14	2.79789e-11	-2.88275e-08	1.58922e-05	-1.39797e+00	0.9958	DF		411									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	411	
pH stem mfg:	MBARI	DF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	DF#411&VL#411_chA-231204.csv	
PT test channel :	A	
HCl concentration:	0.01000	Molar
k2 Calibration window:	12/05/2023 09:12	12/08/2023 22:52
Data subset:	ALL	
Vrs drift rate:	0.03529	mV/day
Vk drift rate:	3.78651	mV/day
Avg std Vk	105.56533	uVolts
Average k2:	-1.0474e-03	V/degC
Std dev k2:	4.0996e-06	V/degC
k2 f(P) c0	-1.0513e-03	
k2 f(P) c1	1.8522e-08	
k2 f(P) c2	-9.7001e-12	
k0 HCL:	-1.3977	Volts
Avg Ik:	10.56	nano amps
Std dev Ik:	2.83	nano amps
Avg Ib:	-2.35	nano amps
Std dev Ib:	2.04	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
7.0	-1.0543e-03	3.3441e-07	-1.3977	4.5133e-06	0.9998	2018	2.1	19.8
16.3	-1.0513e-03	4.6848e-06	-1.3977	6.7472e-05	0.9997	19	2.1	19.8
22.3	-1.0516e-03	2.3713e-06	-1.3975	4.3857e-05	0.9998	39	2.1	19.8
39.2	-1.0505e-03	4.4646e-06	-1.3974	5.8463e-05	0.9995	30	2.1	19.8
62.1	-1.0554e-03	4.8798e-06	-1.3971	6.9069e-05	0.9994	32	2.1	19.8
86.2	-1.0468e-03	5.2707e-06	-1.3969	7.0539e-05	0.9992	32	2.1	19.8
123.4	-1.0473e-03	4.7199e-06	-1.3965	6.4953e-05	0.9988	61	2.1	19.8
173.9	-1.0422e-03	4.5947e-06	-1.3960	6.3482e-05	0.9989	60	2.1	19.8
249.4	-1.0457e-03	3.7007e-06	-1.3954	4.9612e-05	0.9986	110	2.1	19.8
349.3	-1.0466e-03	2.8899e-06	-1.3950	3.9610e-05	0.9992	101	2.1	19.8
448.5	-1.0471e-03	2.9059e-06	-1.3946	3.9751e-05	0.9993	94	2.1	19.8
548.6	-1.0428e-03	2.6900e-06	-1.3945	3.7600e-05	0.9994	94	2.2	19.8
650.2	-1.0435e-03	2.1759e-06	-1.3943	3.0162e-05	0.9996	90	2.2	19.8
749.6	-1.0425e-03	1.9407e-06	-1.3943	2.7271e-05	0.9997	86	2.2	19.8
899.3	-1.0424e-03	1.3193e-06	-1.3942	1.8355e-05	0.9997	172	2.2	19.8
1099.1	-1.0437e-03	1.1740e-06	-1.3941	1.6525e-05	0.9998	164	2.2	19.8
1298.0	-1.0438e-03	1.1329e-06	-1.3941	1.5829e-05	0.9998	164	2.2	19.8
1499.4	-1.0463e-03	1.1132e-06	-1.3940	1.5505e-05	0.9998	162	2.2	19.8
1700.2	-1.0469e-03	1.1936e-06	-1.3939	1.6652e-05	0.9998	159	2.2	19.8
1894.4	-1.0521e-03	1.2697e-06	-1.3937	1.6572e-05	0.9998	137	2.2	19.8
2065.2	-1.0531e-03	4.4209e-07	-1.3936	6.2178e-06	0.9998	872	2.2	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	1.4774e-08	
f(P) R*R:	0.9958	
f(P) c0	-1.3980e+00	
f(P) c1	1.5892e-05	
f(P) c2	-2.8827e-08	
f(P) c3	2.7979e-11	
f(P) c4	-1.4991e-14	
f(P) c5	4.1868e-18	
f(P) c6	-4.7037e-22	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: