PH CALIBRATION FILE GENERATED ON: 01/16/2024 10:31
DF 412
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 412, APEX# XXXX
10, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
5.21487e-10,-9.41792e-04, =k2(fP)*T
1.88689e-05, =k3*P^1
-7.50838e-08, =k4*P^2
1.76765e-10, =k5*P^3
-2.56564e-13, =k6*P^4
2.23859e-16, =k7*P^5
-1.13630e-19, =k8*P^6
3.08408e-23, =k9*P^7
-3.45526e-27, =k10*P^8
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
01/12-01/16/2024	A		-0.129						5.21487e-10	-9.41792e-04	-1.51654	0.9995	-3.45526e-27	3.08408e-23	-1.13630e-19	2.23859e-16	-2.56564e-13	1.76765e-10	-7.50838e-08	1.88689e-05	-1.51655e+00	0.9578	DF		412									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	412	
pH stem mfg:	MBARI	DF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	DF#412&VL#412_chA-240111.csv	
PT test channel :	A	
HCl concentration:	0.01000	Molar
k2 Calibration window:	01/12/2024 17:39	01/16/2024 05:56
Data subset:	ALL	
Vrs drift rate:	-0.12852	mV/day
Vk drift rate:	8.95564	mV/day
Avg std Vk	103.33786	uVolts
Average k2:	-9.4144e-04	V/degC
Std dev k2:	3.6464e-06	V/degC
k2 f(P) c0	-9.4179e-04	
k2 f(P) c1	5.2149e-10	
k0 HCL:	-1.5165	Volts
Avg Ik:	11.38	nano amps
Std dev Ik:	1.72	nano amps
Avg Ib:	0.98	nano amps
Std dev Ib:	1.82	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
7.0	-9.3694e-04	4.9275e-07	-1.5165	6.5216e-06	0.9995	1967	2.1	19.8
15.5	-9.4083e-04	6.1562e-06	-1.5163	8.6393e-05	0.9992	20	2.1	19.8
26.4	-9.5027e-04	7.7554e-06	-1.5160	1.0025e-04	0.9993	13	2.1	19.8
39.8	-9.3767e-04	5.3696e-06	-1.5160	7.8487e-05	0.9991	29	2.1	19.8
61.1	-9.4017e-04	5.6737e-06	-1.5157	7.3724e-05	0.9989	31	2.1	19.8
86.1	-9.4145e-04	4.6359e-06	-1.5154	6.4613e-05	0.9992	36	2.1	19.8
123.3	-9.4260e-04	3.3100e-06	-1.5151	4.4482e-05	0.9993	59	2.1	19.8
173.1	-9.4057e-04	2.7907e-06	-1.5149	3.8225e-05	0.9995	62	2.1	19.8
248.9	-9.4061e-04	2.0360e-06	-1.5146	2.7551e-05	0.9995	111	2.1	19.8
349.0	-9.4334e-04	1.8921e-06	-1.5144	2.5910e-05	0.9996	101	2.1	19.8
449.0	-9.4385e-04	1.9191e-06	-1.5143	2.6241e-05	0.9996	95	2.1	19.8
549.8	-9.4401e-04	1.9037e-06	-1.5143	2.6661e-05	0.9996	92	2.1	19.8
650.7	-9.4399e-04	1.9379e-06	-1.5144	2.6837e-05	0.9996	89	2.1	19.8
749.8	-9.4707e-04	2.9221e-06	-1.5145	4.0671e-05	0.9992	84	2.1	19.8
899.1	-9.4018e-04	2.1457e-06	-1.5148	2.9955e-05	0.9991	171	2.1	19.8
1100.7	-9.3720e-04	2.0982e-06	-1.5151	2.9420e-05	0.9992	165	2.1	19.8
1301.2	-9.3560e-04	1.9748e-06	-1.5153	2.7650e-05	0.9993	163	2.1	19.8
1499.7	-9.3568e-04	1.8245e-06	-1.5155	2.5386e-05	0.9994	157	2.1	19.8
1699.3	-9.4001e-04	1.6941e-06	-1.5157	2.3690e-05	0.9995	162	2.1	19.8
1893.9	-9.4273e-04	1.7954e-06	-1.5158	2.3597e-05	0.9995	136	2.1	19.8
2065.1	-9.4559e-04	6.0250e-07	-1.5158	8.4552e-06	0.9996	874	2.2	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	2.2365e-08	
f(P) R*R:	0.9578	
f(P) c0	-1.5166e+00	
f(P) c1	1.8869e-05	
f(P) c2	-7.5084e-08	
f(P) c3	1.7676e-10	
f(P) c4	-2.5656e-13	
f(P) c5	2.2386e-16	
f(P) c6	-1.1363e-19	
f(P) c7	3.0841e-23	
f(P) c8	-3.4553e-27	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: