PH CALIBRATION FILE GENERATED ON: 01/16/2024 10:32
DF 413
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 413, APEX# XXXX
10, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-7.41401e-09,-1.02609e-03, =k2(fP)*T
1.78532e-05, =k3*P^1
-9.40591e-08, =k4*P^2
2.46906e-10, =k5*P^3
-3.64131e-13, =k6*P^4
3.13928e-16, =k7*P^5
-1.56828e-19, =k8*P^6
4.20555e-23, =k9*P^7
-4.68322e-27, =k10*P^8
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
01/12-01/16/2024	B		-0.108						-7.41401e-09	-1.02609e-03	-1.48447	0.9995	-4.68322e-27	4.20555e-23	-1.56828e-19	3.13928e-16	-3.64131e-13	2.46906e-10	-9.40591e-08	1.78532e-05	-1.48444e+00	0.9393	DF		413									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	413	
pH stem mfg:	MBARI	DF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	DF#413&VL#413_chB-240111.csv	
PT test channel :	B	
HCl concentration:	0.01000	Molar
k2 Calibration window:	01/12/2024 17:23	01/16/2024 05:47
Data subset:	ALL	
Vrs drift rate:	-0.10760	mV/day
Vk drift rate:	23.75269	mV/day
Avg std Vk	121.78806	uVolts
Average k2:	-1.0310e-03	V/degC
Std dev k2:	5.9592e-06	V/degC
k2 f(P) c0	-1.0261e-03	
k2 f(P) c1	-7.4140e-09	
k0 HCL:	-1.4845	Volts
Avg Ik:	8.14	nano amps
Std dev Ik:	1.91	nano amps
Avg Ib:	0.70	nano amps
Std dev Ib:	2.32	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
7.0	-1.0163e-03	4.9391e-07	-1.4845	6.5511e-06	0.9995	1974	2.1	19.8
15.5	-1.0230e-03	3.9164e-06	-1.4842	5.4960e-05	0.9997	20	2.1	19.8
26.4	-1.0249e-03	6.7032e-06	-1.4841	8.6649e-05	0.9995	13	2.1	19.8
39.8	-1.0212e-03	4.3174e-06	-1.4839	6.3108e-05	0.9995	29	2.1	19.8
61.1	-1.0300e-03	3.9005e-06	-1.4836	5.0683e-05	0.9996	31	2.1	19.8
86.1	-1.0293e-03	3.7013e-06	-1.4834	5.1587e-05	0.9996	36	2.1	19.8
123.3	-1.0318e-03	2.8021e-06	-1.4832	3.7657e-05	0.9996	59	2.1	19.8
173.1	-1.0292e-03	2.2120e-06	-1.4831	3.0299e-05	0.9997	62	2.1	19.8
248.9	-1.0317e-03	1.6445e-06	-1.4831	2.2254e-05	0.9997	111	2.1	19.8
349.0	-1.0316e-03	1.8415e-06	-1.4832	2.5217e-05	0.9997	101	2.1	19.8
449.0	-1.0298e-03	1.8502e-06	-1.4832	2.5297e-05	0.9997	95	2.1	19.8
549.8	-1.0300e-03	1.7216e-06	-1.4832	2.4110e-05	0.9997	92	2.1	19.8
650.7	-1.0307e-03	2.0074e-06	-1.4833	2.7800e-05	0.9997	89	2.1	19.8
749.8	-1.0323e-03	2.0686e-06	-1.4833	2.8791e-05	0.9997	84	2.1	19.8
899.1	-1.0328e-03	1.7079e-06	-1.4834	2.3843e-05	0.9995	171	2.1	19.8
1100.7	-1.0360e-03	1.7977e-06	-1.4834	2.5207e-05	0.9995	165	2.1	19.8
1301.2	-1.0375e-03	1.7137e-06	-1.4834	2.3994e-05	0.9996	163	2.1	19.8
1499.7	-1.0380e-03	2.1543e-06	-1.4833	2.9974e-05	0.9993	157	2.1	19.8
1699.3	-1.0377e-03	2.1637e-06	-1.4832	3.0259e-05	0.9993	162	2.1	19.8
1893.9	-1.0346e-03	2.3879e-06	-1.4831	3.1386e-05	0.9993	136	2.1	19.8
2065.1	-1.0430e-03	7.1893e-07	-1.4829	1.0089e-05	0.9996	874	2.2	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	2.3798e-08	
f(P) R*R:	0.9393	
f(P) c0	-1.4844e+00	
f(P) c1	1.7853e-05	
f(P) c2	-9.4059e-08	
f(P) c3	2.4691e-10	
f(P) c4	-3.6413e-13	
f(P) c5	3.1393e-16	
f(P) c6	-1.5683e-19	
f(P) c7	4.2056e-23	
f(P) c8	-4.6832e-27	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: