PH CALIBRATION FILE GENERATED ON: 01/23/2024 13:16
DF 414
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 414, APEX# XXXX
10, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-9.63419e-04, =k2*T
3.15874e-05, =k3*P^1
-1.41492e-07, =k4*P^2
3.46621e-10, =k5*P^3
-4.95172e-13, =k6*P^4
4.19602e-16, =k7*P^5
-2.07517e-19, =k8*P^6
5.52909e-23, =k9*P^7
-6.12863e-27, =k10*P^8
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
01/19-01/22/2024	A		-0.195							-9.63419e-04	-1.49713	0.9990	-6.12863e-27	5.52909e-23	-2.07517e-19	4.19602e-16	-4.95172e-13	3.46621e-10	-1.41492e-07	3.15874e-05	-1.49705e+00	0.9653	DF		414									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	414	
pH stem mfg:	MBARI	DF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	DF#414&VL#414_chA-240118.csv	
PT test channel :	A	
HCl concentration:	0.01000	Molar
k2 Calibration window:	01/19/2024 10:07	01/22/2024 22:29
Data subset:	ALL	
Vrs drift rate:	-0.19494	mV/day
Vk drift rate:	-9.48505	mV/day
Avg std Vk	89.96716	uVolts
Average k2:	-9.6342e-04	V/degC
Std dev k2:	5.0339e-06	V/degC
k2 f(P) c0	-9.6342e-04	
k2 f(P) c1	0.0000e+00	
k0 HCL:	-1.4971	Volts
Avg Ik:	11.39	nano amps
Std dev Ik:	2.33	nano amps
Avg Ib:	0.47	nano amps
Std dev Ib:	2.59	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
7.0	-9.4880e-04	6.8727e-07	-1.4971	9.1254e-06	0.9990	1979	2.1	19.8
16.3	-9.5826e-04	8.0291e-06	-1.4967	1.0638e-04	0.9989	18	2.1	19.8
25.0	-9.7005e-04	1.2640e-05	-1.4962	1.7178e-04	0.9990	8	2.1	19.8
38.2	-9.5457e-04	8.5552e-06	-1.4962	1.1914e-04	0.9977	31	2.1	19.8
61.2	-9.6026e-04	7.0482e-06	-1.4955	9.8179e-05	0.9983	33	2.1	19.8
86.7	-9.6269e-04	7.2529e-06	-1.4951	1.0034e-04	0.9982	34	2.1	19.8
123.8	-9.6531e-04	4.9047e-06	-1.4946	6.6212e-05	0.9985	59	2.1	19.8
173.6	-9.6845e-04	3.8395e-06	-1.4943	5.1916e-05	0.9991	61	2.1	19.8
249.6	-9.6892e-04	2.9746e-06	-1.4941	4.0257e-05	0.9990	111	2.1	19.8
350.1	-9.6592e-04	3.1098e-06	-1.4940	4.2801e-05	0.9990	101	2.1	19.8
448.7	-9.6756e-04	3.2528e-06	-1.4939	4.4459e-05	0.9990	93	2.2	19.8
548.1	-9.6402e-04	2.9536e-06	-1.4939	4.0920e-05	0.9991	93	2.2	19.8
648.6	-9.6327e-04	2.8101e-06	-1.4939	3.9245e-05	0.9993	89	2.2	19.8
748.9	-9.6273e-04	2.8896e-06	-1.4940	3.9664e-05	0.9992	88	2.1	19.8
899.3	-9.6137e-04	2.1500e-06	-1.4942	3.0193e-05	0.9992	170	2.1	19.8
1099.9	-9.6031e-04	2.2244e-06	-1.4944	3.1010e-05	0.9991	166	2.1	19.8
1301.0	-9.6185e-04	2.2750e-06	-1.4946	3.1812e-05	0.9991	164	2.1	19.8
1498.8	-9.6464e-04	2.3050e-06	-1.4948	3.2076e-05	0.9991	156	2.1	19.8
1697.4	-9.6574e-04	2.1803e-06	-1.4949	3.0446e-05	0.9992	160	2.2	19.8
1894.1	-9.6877e-04	2.2970e-06	-1.4950	3.0637e-05	0.9992	142	2.2	19.8
2065.3	-9.6830e-04	8.7024e-07	-1.4951	1.2199e-05	0.9993	870	2.2	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	4.9563e-08	
f(P) R*R:	0.9653	
f(P) c0	-1.4970e+00	
f(P) c1	3.1587e-05	
f(P) c2	-1.4149e-07	
f(P) c3	3.4662e-10	
f(P) c4	-4.9517e-13	
f(P) c5	4.1960e-16	
f(P) c6	-2.0752e-19	
f(P) c7	5.5291e-23	
f(P) c8	-6.1286e-27	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: