PH CALIBRATION FILE GENERATED ON: 01/23/2024 13:18
DF 415
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 415, APEX# XXXX
9, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-7.73952e-09,-9.04221e-04, =k2(fP)*T
2.29481e-05, =k3*P^1
-7.16351e-08, =k4*P^2
1.14056e-10, =k5*P^3
-1.03039e-13, =k6*P^4
5.33240e-17, =k7*P^5
-1.46889e-20, =k8*P^6
1.66772e-24, =k9*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
01/19-01/22/2024	B		-0.203						-7.73952e-09	-9.04221e-04	-1.48025	0.9997		1.66772e-24	-1.46889e-20	5.33240e-17	-1.03039e-13	1.14056e-10	-7.16351e-08	2.29481e-05	-1.48019e+00	0.9886	DF		415									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	415	
pH stem mfg:	MBARI	DF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	DF#415&VL#415_chB-240118.csv	
PT test channel :	B	
HCl concentration:	0.01000	Molar
k2 Calibration window:	01/19/2024 10:07	01/22/2024 22:49
Data subset:	ALL	
Vrs drift rate:	-0.20347	mV/day
Vk drift rate:	17.99799	mV/day
Avg std Vk	106.78551	uVolts
Average k2:	-9.0937e-04	V/degC
Std dev k2:	6.0920e-06	V/degC
k2 f(P) c0	-9.0422e-04	
k2 f(P) c1	-7.7395e-09	
k0 HCL:	-1.4803	Volts
Avg Ik:	9.03	nano amps
Std dev Ik:	3.10	nano amps
Avg Ib:	-0.70	nano amps
Std dev Ib:	3.11	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
7.0	-8.9521e-04	3.6555e-07	-1.4803	4.8832e-06	0.9997	1999	2.1	19.8
16.3	-9.0142e-04	5.1891e-06	-1.4799	6.8753e-05	0.9995	18	2.1	19.8
25.0	-9.1273e-04	8.4722e-06	-1.4795	1.1514e-04	0.9995	8	2.1	19.8
38.2	-9.0161e-04	4.3399e-06	-1.4794	6.0438e-05	0.9993	31	2.1	19.8
61.2	-9.0597e-04	3.9514e-06	-1.4790	5.5042e-05	0.9994	33	2.1	19.8
86.7	-9.0194e-04	3.6914e-06	-1.4787	5.1066e-05	0.9995	34	2.1	19.8
123.8	-9.0626e-04	3.2810e-06	-1.4782	4.4293e-05	0.9993	59	2.1	19.8
173.6	-9.0789e-04	2.5303e-06	-1.4778	3.4213e-05	0.9995	61	2.1	19.8
249.6	-9.0913e-04	1.9400e-06	-1.4775	2.6255e-05	0.9995	111	2.1	19.8
350.1	-9.0799e-04	2.0550e-06	-1.4773	2.8283e-05	0.9995	101	2.1	19.8
448.7	-9.0892e-04	2.1060e-06	-1.4773	2.8784e-05	0.9995	93	2.2	19.8
548.1	-9.0895e-04	2.0446e-06	-1.4774	2.8326e-05	0.9995	93	2.2	19.8
648.6	-9.0928e-04	2.0315e-06	-1.4775	2.8371e-05	0.9996	89	2.2	19.8
748.9	-9.1320e-04	1.9433e-06	-1.4774	2.6675e-05	0.9996	88	2.1	19.8
899.3	-9.1173e-04	1.2003e-06	-1.4775	1.6857e-05	0.9997	170	2.1	19.8
1099.9	-9.1187e-04	1.3196e-06	-1.4776	1.8396e-05	0.9997	166	2.1	19.8
1301.0	-9.1227e-04	1.1378e-06	-1.4776	1.5910e-05	0.9997	164	2.1	19.8
1498.8	-9.1377e-04	1.2392e-06	-1.4776	1.7245e-05	0.9997	156	2.1	19.8
1697.4	-9.1567e-04	1.5588e-06	-1.4775	2.1767e-05	0.9995	160	2.2	19.8
1894.1	-9.1737e-04	1.8679e-06	-1.4774	2.4915e-05	0.9994	142	2.2	19.8
2065.3	-9.2369e-04	6.3870e-07	-1.4772	8.9535e-06	0.9996	870	2.2	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	2.0858e-08	
f(P) R*R:	0.9886	
f(P) c0	-1.4802e+00	
f(P) c1	2.2948e-05	
f(P) c2	-7.1635e-08	
f(P) c3	1.1406e-10	
f(P) c4	-1.0304e-13	
f(P) c5	5.3324e-17	
f(P) c6	-1.4689e-20	
f(P) c7	1.6677e-24	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: