PH CALIBRATION FILE GENERATED ON: 02/13/2024 12:38
DF 416
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 416, APEX# XXXX
9, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-9.52086e-04, =k2*T
2.02508e-05, =k3*P^1
-7.11366e-08, =k4*P^2
1.27507e-10, =k5*P^3
-1.30861e-13, =k6*P^4
7.64023e-17, =k7*P^5
-2.35019e-20, =k8*P^6
2.94852e-24, =k9*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
02/09-02/13/2024	A		-0.032							-9.52086e-04	-1.49797	0.9994		2.94852e-24	-2.35019e-20	7.64023e-17	-1.30861e-13	1.27507e-10	-7.11366e-08	2.02508e-05	-1.49793e+00	0.9416	DF		416									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	416	
pH stem mfg:	MBARI	DF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	DF#416&VL#416_chA-240208.csv	
PT test channel :	A	
HCl concentration:	0.01000	Molar
k2 Calibration window:	02/09/2024 16:01	02/13/2024 04:41
Data subset:	ALL	
Vrs drift rate:	-0.03222	mV/day
Vk drift rate:	6.84449	mV/day
Avg std Vk	106.21221	uVolts
Average k2:	-9.5209e-04	V/degC
Std dev k2:	3.4127e-06	V/degC
k2 f(P) c0	-9.5209e-04	
k2 f(P) c1	0.0000e+00	
k0 HCL:	-1.4980	Volts
Avg Ik:	10.96	nano amps
Std dev Ik:	1.73	nano amps
Avg Ib:	1.04	nano amps
Std dev Ib:	1.81	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
7.0	-9.5157e-04	5.1804e-07	-1.4980	6.9065e-06	0.9994	1999	2.1	19.8
15.4	-9.5170e-04	7.2375e-06	-1.4978	1.0158e-04	0.9991	17	2.1	19.8
25.1	-9.5446e-04	9.1462e-06	-1.4976	1.1266e-04	0.9988	15	2.1	19.8
39.8	-9.5084e-04	9.1617e-06	-1.4973	1.3187e-04	0.9976	28	2.1	19.8
62.5	-9.5544e-04	8.5201e-06	-1.4969	1.1353e-04	0.9974	35	2.1	19.8
87.5	-9.4929e-04	7.4591e-06	-1.4966	1.0628e-04	0.9982	31	2.1	19.8
125.0	-9.5738e-04	4.7991e-06	-1.4961	6.5201e-05	0.9985	63	2.1	19.8
175.4	-9.5808e-04	3.9624e-06	-1.4959	5.3687e-05	0.9990	58	2.1	19.8
248.9	-9.5348e-04	2.3374e-06	-1.4958	3.2052e-05	0.9994	109	2.1	19.8
349.0	-9.5335e-04	2.3498e-06	-1.4957	3.1777e-05	0.9994	103	2.1	19.8
448.9	-9.4970e-04	2.4525e-06	-1.4957	3.4147e-05	0.9994	94	2.1	19.8
547.6	-9.5156e-04	2.4677e-06	-1.4958	3.3497e-05	0.9994	91	2.2	19.8
649.9	-9.5233e-04	2.1814e-06	-1.4959	3.0698e-05	0.9995	93	2.2	19.8
751.0	-9.5231e-04	2.2687e-06	-1.4960	3.1287e-05	0.9995	85	2.2	19.8
899.2	-9.5363e-04	1.7540e-06	-1.4962	2.4480e-05	0.9994	167	2.2	19.8
1098.4	-9.5489e-04	1.8900e-06	-1.4964	2.6336e-05	0.9994	164	2.2	19.8
1299.2	-9.5272e-04	1.7982e-06	-1.4967	2.5135e-05	0.9994	162	2.2	19.8
1498.8	-9.5239e-04	1.8848e-06	-1.4969	2.6346e-05	0.9994	157	2.2	19.8
1698.4	-9.5070e-04	1.7813e-06	-1.4972	2.4826e-05	0.9995	158	2.2	19.8
1893.4	-9.4338e-04	1.7972e-06	-1.4975	2.3978e-05	0.9995	139	2.2	19.8
2065.2	-9.4462e-04	5.5780e-07	-1.4977	7.8029e-06	0.9997	871	2.2	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	3.7226e-08	
f(P) R*R:	0.9416	
f(P) c0	-1.4979e+00	
f(P) c1	2.0251e-05	
f(P) c2	-7.1137e-08	
f(P) c3	1.2751e-10	
f(P) c4	-1.3086e-13	
f(P) c5	7.6402e-17	
f(P) c6	-2.3502e-20	
f(P) c7	2.9485e-24	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: