PH CALIBRATION FILE GENERATED ON: 02/13/2024 12:34
DF 417
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 417, APEX# XXXX
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-4.97758e-09,-9.57358e-04, =k2(fP)*T
1.34781e-05, =k3*P^1
-2.58710e-08, =k4*P^2
2.43466e-11, =k5*P^3
-1.21955e-14, =k6*P^4
3.09360e-18, =k7*P^5
-3.06756e-22, =k8*P^6
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
02/09-02/13/2024	B		-0.112						-4.97758e-09	-9.57358e-04	-1.48684	0.9998			-3.06756e-22	3.09360e-18	-1.21955e-14	2.43466e-11	-2.58710e-08	1.34781e-05	-1.48705e+00	0.9788	DF		417									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	417	
pH stem mfg:	MBARI	DF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	DF#417&VL#417_chB-240208.csv	
PT test channel :	B	
HCl concentration:	0.01000	Molar
k2 Calibration window:	02/09/2024 16:08	02/13/2024 04:52
Data subset:	ALL	
Vrs drift rate:	-0.11229	mV/day
Vk drift rate:	-1.54066	mV/day
Avg std Vk	116.02165	uVolts
Average k2:	-9.6067e-04	V/degC
Std dev k2:	5.0122e-06	V/degC
k2 f(P) c0	-9.5736e-04	
k2 f(P) c1	-4.9776e-09	
k0 HCL:	-1.4868	Volts
Avg Ik:	8.45	nano amps
Std dev Ik:	1.87	nano amps
Avg Ib:	0.79	nano amps
Std dev Ib:	2.24	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
7.0	-9.5535e-04	3.1748e-07	-1.4868	4.2390e-06	0.9998	2004	2.1	19.8
15.4	-9.6079e-04	3.2806e-06	-1.4867	4.6045e-05	0.9998	17	2.1	19.8
25.1	-9.6076e-04	4.9912e-06	-1.4867	6.1478e-05	0.9996	15	2.1	19.8
39.8	-9.5572e-04	4.1961e-06	-1.4866	6.0396e-05	0.9995	28	2.1	19.8
62.5	-9.5842e-04	4.5296e-06	-1.4864	6.0359e-05	0.9993	35	2.1	19.8
87.5	-9.5178e-04	4.7245e-06	-1.4862	6.7317e-05	0.9993	31	2.1	19.8
125.0	-9.5384e-04	4.2175e-06	-1.4858	5.7300e-05	0.9988	63	2.1	19.8
175.4	-9.5503e-04	3.3237e-06	-1.4854	4.5034e-05	0.9993	58	2.1	19.8
248.9	-9.5759e-04	2.3958e-06	-1.4850	3.2853e-05	0.9993	109	2.1	19.8
349.0	-9.5796e-04	2.1968e-06	-1.4847	2.9708e-05	0.9995	103	2.1	19.8
448.9	-9.5985e-04	1.8711e-06	-1.4844	2.6051e-05	0.9997	94	2.1	19.8
547.6	-9.6629e-04	2.2676e-06	-1.4843	3.0781e-05	0.9995	91	2.2	19.8
649.9	-9.6858e-04	2.8877e-06	-1.4843	4.0638e-05	0.9992	93	2.2	19.8
751.0	-9.6591e-04	3.0844e-06	-1.4844	4.2536e-05	0.9992	85	2.2	19.8
899.2	-9.6334e-04	1.8883e-06	-1.4844	2.6355e-05	0.9994	167	2.2	19.8
1098.4	-9.6220e-04	1.9876e-06	-1.4845	2.7696e-05	0.9993	164	2.2	19.8
1299.2	-9.6182e-04	2.0176e-06	-1.4846	2.8201e-05	0.9993	162	2.2	19.8
1498.8	-9.6088e-04	1.9005e-06	-1.4847	2.6566e-05	0.9994	157	2.2	19.8
1698.4	-9.6114e-04	1.8636e-06	-1.4847	2.5972e-05	0.9994	158	2.2	19.8
1893.4	-9.6393e-04	2.0890e-06	-1.4846	2.7871e-05	0.9994	139	2.2	19.8
2065.2	-9.7298e-04	7.8320e-07	-1.4845	1.0956e-05	0.9994	871	2.2	19.8

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	2.6448e-08	
f(P) R*R:	0.9788	
f(P) c0	-1.4870e+00	
f(P) c1	1.3478e-05	
f(P) c2	-2.5871e-08	
f(P) c3	2.4347e-11	
f(P) c4	-1.2195e-14	
f(P) c5	3.0936e-18	
f(P) c6	-3.0676e-22	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: