//++************** Deployment Settings ***************
// Firmware version: 	v4.1.6 MpHOx revB
// Sampling period (s)	300
// Samples hour align:	Yes
// Vrsi sps,trials: 	20, 10
// Vrse sps,trials: 	20, 10
// Vtherm sps,trials	20, 5
// Ik sps, trials:   	20, 1
// Vk sps, trials:   	20, 5
// Ib sps, trials:   	20, 1
// Vb sps, trials:   	20, 5
// Vbias sps,trials: 	40, 1
// Pump start delay: 	0
// Pump seq type:   	PUMP_SINGLE
// Pump on time (s):	10
// Low battery voltage:	8.0
// Output mode:        	Normal
// Deploy time:   	2023/10/25 06:57:06
// Time zone:       	Local
// TCOffset:     	0.000000
// k0int:        	-0.400000
// k0ext:        	-1.300000
// k2int:        	-0.001455
// k2ext:        	-0.001081
// Def Sal (ppt):	35.000000
// Offset Ik:    	0.000000
// Offset Ib:    	0.000000
// S-H c0        	340.981986
// S-H c1        	-0.000091
// S-H c2        	-95.088067
// S-H c3        	0.965370
// Version Info: 	v4.1.6 MpHOx revB
// File name:     	LLB22_3.txt
// User initials: 	yt
// Board SN:      	A001023
// MCAP SN:       	D000035
// DuraFET SN:    	DSD_Yui2
// Optode SN:     	1912
// CTD SN:        	NA
// Pump1 SN:      	NA
// Pump2 SN:      	NA
// Package name:  	mphox002_BEAMS
// Fab Note:      	2020 unipolarbias r30 installed
// Deploy note:   	 
// MicroSD Logging:  	1
// Uart Echo:     	1
// App Exec:      	0
// A -- Sample Num               = 1
// B -- MM/DD/YYYY HH:MM:SS      = 1
// C -- Battery Volt             = 1
// D -- Bias Battery Pos         = 1
// E -- Bias Battery Neg         = 0
// F -- Board Temperature        = 1
// G -- Board Humidity           = 1
// H -- Vthermistor              = 0
//      Vtermistor Std           = 0
// I -- Temperature Calc         = 0
// J -- Vrsi (Int Ref pH volt)   = 0
//      Vrsi Std                 = 0
// K -- pH Vrsi Calc             = 0
// L -- Vrse (Ext Ref pH volt)   = 1
//      Vrse Std                 = 1
// M -- pH Vrse Calc             = 0
// N -- Vrsi Biased (7pH=0v)     = 0
// O -- Vrsi Biased Std          = 0
// P -- Vrse Biased (7pH=0v)     = 0
// Q -- Vrse Biased Std          = 0
// R -- Counter Electrode Vk     = 1
//      Counter Electrode Vk Std = 1
// T -- Counter Electrode Cur Ik = 1
// U -- Substrate Current        = 1
// V -- Optode 4831              = 1
// W -- CTD SBE37 MicroCat       = 1
//--**************************************************


 SampNum	     MM/DD/YYYY HH:MM:SS	VbatMain	VbiasPos	 TC_cont	Humidity	    Vrse	Vrse_std	      Vk	  Vk_std	      Ik	      Ib	Opt_PN	Opt_SN	Moxy	O2satper	TC_opt	Dphase	Bphase	Rphase	Bamp	Bpot	Ramp	Opt_rawtemp	TC_MCat	Cond	Pres	pSal	Date_MC	Time_MC
#0000000	10/25/2023 06:57:31	   10.66	    3.58	   22.91	      40	-1.092949	0.000006	-0.892928	0.000014	   19.71	  -0.218	5730	1912	273.323	97.468	20.620	29.473	30.979	37.054	6.075	703.0	727.9	260.4	CTD not responding with SBE37 data, check connection, make sure data config is SBE37