## Footprint report - date 1/9/2020 9:35:38 PM
## Created by Pcbnew version kicad (5.1.5)-3
## Unit = mm, Angle = deg.

$BeginDESCRIPTION

$BOARD
upper_left_corner -43.432143 -38.381220
lower_right_corner 43.432143 38.092500
$EndBOARD

$MODULE "J1"
reference "J1"
value "Conn_01x02"
footprint "ProjectFootprints:LED-PWR-IN"
attribut none
position 20.238507 -26.957310  orientation 50.00
layer front
$PAD "2"
Shape Rect Layer front
position  0.000000  2.400000  size  3.000000  2.000000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer front
position  0.000000 -2.400000  size  3.000000  2.000000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  J1

$MODULE "U28"
reference "U28"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  0.000000 24.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U28

$MODULE "U27"
reference "U27"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  6.900000 28.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U27

$MODULE "U57"
reference "U57"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 20.800000 20.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U57

$MODULE "U20"
reference "U20"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -20.800000  4.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U20

$MODULE "U19"
reference "U19"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -27.700000  8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U19

$MODULE "U18"
reference "U18"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -20.800000 -4.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U18

$MODULE "U25"
reference "U25"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -7.000000 28.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U25

$MODULE "U23"
reference "U23"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -13.900000 24.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U23

$MODULE "U26"
reference "U26"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -6.900000 20.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U26

$MODULE "U22"
reference "U22"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -20.800000 12.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U22

$MODULE "U24"
reference "U24"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -13.800000 16.100000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U24

$MODULE "U21"
reference "U21"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -20.800000 20.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U21

$MODULE "U4"
reference "U4"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 20.800000 -12.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U4

$MODULE "U1"
reference "U1"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 27.700000 -16.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U1

$MODULE "U31"
reference "U31"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 27.700000  0.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U31

$MODULE "U2"
reference "U2"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 27.700000 -8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U2

$MODULE "U8"
reference "U8"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  6.900000 -20.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U8

$MODULE "U5"
reference "U5"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 13.800000 -24.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U5

$MODULE "U3"
reference "U3"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 20.800000 -20.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U3

$MODULE "U7"
reference "U7"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  6.900000 -28.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U7

$MODULE "U6"
reference "U6"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 13.800000 -16.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U6

$MODULE "U50"
reference "U50"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  6.900000  4.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U50

$MODULE "U56"
reference "U56"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 13.900000 16.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U56

$MODULE "U51"
reference "U51"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  0.000000 16.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U51

$MODULE "U53"
reference "U53"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  6.900000 20.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U53

$MODULE "U55"
reference "U55"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 13.900000 24.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U55

$MODULE "U52"
reference "U52"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  6.900000 12.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U52

$MODULE "U58"
reference "U58"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 20.800000 12.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U58

$MODULE "U54"
reference "U54"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 13.800000  8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U54

$MODULE "U12"
reference "U12"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -7.000000 -20.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U12

$MODULE "U11"
reference "U11"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -13.900000 -24.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U11

$MODULE "U10"
reference "U10"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  0.000000 -24.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U10

$MODULE "U17"
reference "U17"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -27.700000  0.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U17

$MODULE "U15"
reference "U15"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -27.700000 -8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U15

$MODULE "U16"
reference "U16"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -20.800000 -12.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U16

$MODULE "U13"
reference "U13"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -20.800000 -20.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U13

$MODULE "U9"
reference "U9"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -6.900000 -28.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U9

$MODULE "U14"
reference "U14"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -13.900000 -16.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U14

$MODULE "U38"
reference "U38"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  6.900000 -4.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U38

$MODULE "U46"
reference "U46"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  0.000000  0.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U46

$MODULE "U48"
reference "U48"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  0.000000  8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U48

$MODULE "U32"
reference "U32"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 27.800000  8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U32

$MODULE "U43"
reference "U43"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -13.900000 -8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U43

$MODULE "U39"
reference "U39"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  0.000000 -16.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U39

$MODULE "U33"
reference "U33"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 20.800000 -4.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U33

$MODULE "U35"
reference "U35"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 13.900000 -8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U35

$MODULE "U44"
reference "U44"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -6.900000  4.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U44

$MODULE "U45"
reference "U45"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -13.900000  0.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U45

$MODULE "U41"
reference "U41"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -6.900000 -12.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U41

$MODULE "U49"
reference "U49"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -6.900000 12.100000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U49

$MODULE "U47"
reference "U47"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -13.900000  8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U47

$MODULE "U34"
reference "U34"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 20.800000  4.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U34

$MODULE "U40"
reference "U40"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  0.000000 -8.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U40

$MODULE "U36"
reference "U36"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position 13.900000  0.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U36

$MODULE "U42"
reference "U42"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position -6.900000 -4.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U42

$MODULE "U37"
reference "U37"
value "CreeXD16"
footprint "ProjectFootprints:LED_Cree-XD16_7.5-mm-reflector-HandSoldering"
attribut smd
position  6.900000 -12.000000  orientation 180.00
layer front
$PAD "1"
Shape Rect Layer front
position -0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position  0.880000  0.000000  size  1.250000  1.600000  orientation -180.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  U37

$MODULE ""
reference ""
value "MountingHole_2.2mm_M2"
footprint "MountingHole:MountingHole_2.2mm_M2"
attribut virtual
position -34.000000  0.000000  orientation 0.00
layer front
$PAD "1"
Shape Circle Layer both
position  0.000000  0.000000  size  2.200000  2.200000  orientation 0.00
drill  2.200000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  

$MODULE ""
reference ""
value "MountingHole_2.2mm_M2"
footprint "MountingHole:MountingHole_2.2mm_M2"
attribut virtual
position  0.000000 34.000000  orientation 0.00
layer front
$PAD "1"
Shape Circle Layer both
position  0.000000  0.000000  size  2.200000  2.200000  orientation 0.00
drill  2.200000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  

$MODULE ""
reference ""
value "MountingHole_2.2mm_M2"
footprint "MountingHole:MountingHole_2.2mm_M2"
attribut virtual
position 34.000000  0.000000  orientation 0.00
layer front
$PAD "1"
Shape Circle Layer both
position  0.000000  0.000000  size  2.200000  2.200000  orientation 0.00
drill  2.200000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  

$MODULE ""
reference ""
value "MountingHole_2.2mm_M2"
footprint "MountingHole:MountingHole_2.2mm_M2"
attribut virtual
position  0.000000 -34.000000  orientation 0.00
layer front
$PAD "1"
Shape Circle Layer both
position  0.000000  0.000000  size  2.200000  2.200000  orientation 0.00
drill  2.200000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  

$MODULE "D2"
reference "D2"
value "Red 1.8V @ 2mA"
footprint "LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder"
attribut smd
position 12.300000 -32.900000  orientation 145.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.875000  0.000000  size  1.050000  0.950000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.875000  0.000000  size  1.050000  0.950000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  D2

$MODULE "D1"
reference "D1"
value "Green 2.65V 2 mA"
footprint "LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder"
attribut smd
position 15.400000 -30.700000  orientation 145.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.875000  0.000000  size  1.050000  0.950000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.875000  0.000000  size  1.050000  0.950000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  D1

$MODULE "R5"
reference "R5"
value "10k NTC"
footprint "Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder"
attribut smd
position 32.300000  4.500000  orientation 90.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  1.025000  0.000000  size  1.150000  1.400000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -1.025000  0.000000  size  1.150000  1.400000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R5

$MODULE "R2"
reference "R2"
value "210k NTC"
footprint "Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder"
attribut smd
position 11.100000 -31.300000  orientation 145.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  1.025000  0.000000  size  1.150000  1.400000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -1.025000  0.000000  size  1.150000  1.400000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R2

$MODULE "Q1"
reference "Q1"
value "BSC028N06LS3"
footprint "Package_TO_SOT_SMD:TDSON-8-1"
attribut smd
position 28.900000 16.600000  orientation 240.00
layer front
$PAD ""
Shape CustomShape Layer nocopper
position  0.650000  0.000000  size  3.750000  4.410000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD ""
Shape Rect Layer nocopper
position  2.905000  1.905000  size  0.750000  0.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD ""
Shape Rect Layer nocopper
position  2.905000  0.635000  size  0.750000  0.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD ""
Shape Rect Layer nocopper
position  2.905000 -0.635000  size  0.750000  0.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD ""
Shape Rect Layer nocopper
position  2.905000 -1.905000  size  0.750000  0.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "5"
Shape Rect Layer front
position  1.050000  0.000000  size  4.550000  4.410000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD ""
Shape Rect Layer nocopper
position -0.200000  0.850000  size  1.500000  1.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD ""
Shape Rect Layer nocopper
position -0.200000 -0.850000  size  1.500000  1.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD ""
Shape Rect Layer nocopper
position  1.500000  0.850000  size  1.500000  1.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD ""
Shape Rect Layer nocopper
position  1.500000 -0.850000  size  1.500000  1.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "4"
Shape Rect Layer front
position -2.900000  1.905000  size  0.850000  0.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "3"
Shape Rect Layer front
position -2.900000  0.635000  size  0.850000  0.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "2"
Shape Rect Layer front
position -2.900000 -0.635000  size  0.850000  0.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Rect Layer front
position -2.900000 -1.905000  size  0.850000  0.500000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  Q1

$MODULE "R1"
reference "R1"
value "23.7k"
footprint "Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder"
attribut smd
position 14.400000 -29.300000  orientation 145.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  0.875000  0.000000  size  1.050000  0.950000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -0.875000  0.000000  size  1.050000  0.950000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R1

$MODULE "R3"
reference "R3"
value "4k"
footprint "Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder"
attribut smd
position 25.700000 13.800000  orientation 240.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  1.025000  0.000000  size  1.150000  1.400000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -1.025000  0.000000  size  1.150000  1.400000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R3

$MODULE "R4"
reference "R4"
value ".075"
footprint "Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder"
attribut smd
position 34.800000  5.000000  orientation 270.00
layer front
$PAD "2"
Shape Roundrect Layer front
position  1.487500  0.000000  size  1.425000  1.750000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$PAD "1"
Shape Roundrect Layer front
position -1.487500  0.000000  size  1.425000  1.750000  orientation 0.00
drill  0.000000
shape_offset  0.000000  0.000000
$EndPAD
$EndMODULE  R4

$EndDESCRIPTION
