ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('707-0264-6MG10_SW0001','2020-09-08T',(''),(''), 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2016360', 'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2016360','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#13866=DIMENSIONAL_EXPONENTS(1.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#13868=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.54E1),#13867);
#13869=(CONVERSION_BASED_UNIT('INCH',#13868)LENGTH_UNIT()NAMED_UNIT(#13866));
#13872=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2), #13871);
#13873=(CONVERSION_BASED_UNIT('DEGREE',#13872)NAMED_UNIT(*)PLANE_ANGLE_UNIT());
#13875=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.853441579648E-5),#13869, 'closure', 'Maximum model space distance between geometric entities at asserted connectivities');
#13876=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT(( #13875))GLOBAL_UNIT_ASSIGNED_CONTEXT((#13869,#13873,#13874))REPRESENTATION_CONTEXT('ID1','3'));
#13878=APPLICATION_CONTEXT( 'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#13879=APPLICATION_PROTOCOL_DEFINITION('international standard', 'config_control_design',1994,#13878);
#13880=DESIGN_CONTEXT('',#13878,'design');
#13881=MECHANICAL_CONTEXT('',#13878,'mechanical');
#13882=PRODUCT('707-0264-6MG10_SW0001','707-0264-6MG10_SW0001','NOT SPECIFIED',( #13881));
#13883=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION', #13882,.MADE.);
#13887=PRODUCT_CATEGORY('part','');
#13888=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#13882));
#13867=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#13871=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#13874=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#13884=PRODUCT_DEFINITION('design','',#13883,#13880);
#13885=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 707-0264-6MG10_SW0001.',#13884);
ENDSEC;
END-ISO-10303-21;