CoCreate ME DXF Translator - Revision - 9.00 1999.
Translation - MI to DWG

The configuration file is : d:\APPLICATIONS\ME10\dxf\DXF.con
The message file is       : d:\APPLICATIONS\ME10\dxf\DXF.ms

The source file is        : C:\TEMP\M_A00422
The destination file is   : .\00.TMP.dxf
The log file is           : J:\VAULT\WESTERNFLYER\100057.log
___________________________________________________________________________
$$ general translation parameters
String  **Source directory path      :.\
String  **Destination directory path :.\
ON/OFF  **Verbose                    :ON
Integer **Error limit                :0
ON/OFF  **Overwrite                  :ON

ON/OFF  **Strip suffix               :ON
String  **MI suffix                  :
String  **DXF suffix                 :.dxf
String  **Log suffix                 :.log
ON/OFF  **Kanji translation          :OFF
ON/OFF  **Translate Thickness        :OFF

ON/OFF  **Translate RGB-Color        :ON
ON/OFF  **Associative Dimensions     :ON
ON/OFF  ****Alternate Dimension Text :ON
ON/OFF  ****Associative Centerlines  :ON
ON/OFF  ****Associative Linetypes    :OFF
ON/OFF  ****Missing Extension Lines  :ON
ON/OFF  ****Changed with OBLIQUE     :ON
ON/OFF  ****Missing DIMSTYLE TABLE   :ON
ON/OFF  ****Create polymarkers       :ON
ON/OFF  ****Fix dxf text position    :OFF
ON/OFF  **Keep attrib text with part :OFF
ON/OFF  ****Keep extra attrib info   :OFF
ON/OFF  **Record layer 0 information :OFF
ON/OFF  **Record bylayer information :OFF
ON/OFF  **Keep block layer info      :OFF

$$ data for translation DXF to MI
String  **Units                      :mm
Real>0  **Units scale                :1
String  **User specified MI file name:
String  **File description           :
String  **Model revision code        :
String  **Creation date              :
String  **Creation time              :
String  **Creator                    :
String  **Department                 :
String  **Update date                :
String  **Update time                :
String  **Updater                    :
String  **Text of start section      :DXF to MI Translator
String  **Name of assoc solid        :ACADSOLID
String  **Name of assoc trace        :ACADTRACE
String  **Name of ext ref part layer :ACAD_EXT_REF
ON/OFF  **Solid/trace fill switch    :ON
ON/OFF  **Delete unused blocks       :ON
1-8     **Polymarker type number     :2
Real>0  **Character width factor     :1.1
Real>0  **Degree of spline pts       :10
ON/OFF  **Translate to B-spline      :ON
1-3     **Translate DXF Linesize     :0

$$ data for translation from MI to DXF
ON/OFF  **Point translation switch   :ON
ON/OFF  **Constr geometry switch     :ON
String  **Layer of construction      :CONSTRUCTION
1-7     **DXF color for black        :7
ON/OFF  **Translate hatch dist 0     :ON
Real>0  **Alternative hatch distance :0.1
Real>0  **Character width factor     :0.9
1-100   **Max num arcs               :5
Real>=0 **Min arc length             :0
Real>=0 **Min arc radius             :0
Real>0  **Max arc radius             :3.40282e+038
1-100   **B-spline accuracy          :10
1-3     **Translate MI Pen/Linesize  :0

$$ $$ additional translation parameters for

$$ $$ translation from or to DWG
String  **DWG suffix                 :.dwg
ON/OFF  **Keep DXF file              :OFF
ON/OFF  **Store Pixel Data           :ON

$$    0 SOLID
$$    1 DASHED
$$    2 DOTTED
$$    3 DOT_CENTER
$$    5 LONG_DASHED
$$    6 DASH_CENTER
$$    7 PHANTOM
$$   10 CENTER_DASH_DASH

$$  Old linetypes, not longer used in ME10 but necessary for
$$  compatibility to old ME10 drawings

$$    4 DASH_DOT_DOT
$$    8 (old PHANTOM)
$$    9 SHORT DASH
$$   11 LONG_DASH_SHORT_DASH
$$   12 LONG_DASH_2X_SHORT_DASH

$$ linetype mapping - format MUST be maintained
MI linetype  0 <==> DXF linetype CONTINUOUS
MI linetype  1 <==> DXF linetype DASHED
MI linetype  2 <==> DXF linetype DOT
MI linetype  3 <==> DXF linetype DASHDOT
MI linetype  5 <==> DXF linetype DASHED
MI linetype  6 <==> DXF linetype CENTER
MI linetype  7 <==> DXF linetype DIVIDE
MI linetype 10 <==> DXF linetype PHANTOM
MI linetype  3 <==> DXF linetype BORDER
MI linetype  1 <==> DXF linetype HIDDEN
MI linetype  4 <==> DXF linetype DIVIDE
MI linetype  8 <==> DXF linetype DIVIDE
MI linetype  9 <==> DXF linetype DASHED
MI linetype 11 <==> DXF linetype CENTER
MI linetype 12 <==> DXF linetype DIVIDE

$$ font mapping - format MUST be maintained
MI font hp_i3098_v <==> DXF style STANDARD => font txt
MI font hp_i3098_c <==> DXF style STANDARD => font txt
MI font hp_d17_v <==> DXF style SIMPLEX => font simplex
MI font hp_d17_c <==> DXF style SIMPLEX => font simplex
MI font hp_block_v <==> DXF style COMPLEX => font complex
MI font hp_block_c <==> DXF style COMPLEX => font complex
MI font hp_jasc_v <==> DXF style ITALIC => font italic
MI font hp_jasc_c <==> DXF style ITALIC => font italic

$$DXF2MI-Arrowmaps
ARROWMAP_DXF_TICK    ARROWMAP_MI_SLASH   
ARROWMAP_DXF_ARROW   ARROWMAP_MI_ARROW   
ARROWMAP_DXF_FREE    ARROWMAP_MI_ARROW   
ARROWMAP_DXF_DOT     ARROWMAP_MI_DOT     

$$MI2DXF-Arrowmaps
ARROWMAP_MI_SLASH    ARROWMAP_DXF_TICK   
ARROWMAP_MI_ARROW    ARROWMAP_DXF_ARROW  
ARROWMAP_MI_NONE     ARROWMAP_DXF_NONE   
ARROWMAP_MI_DOT      ARROWMAP_DXF_DOT    
ARROWMAP_MI_JIS      ARROWMAP_DXF_ARROW  
ARROWMAP_MI_REVARR   ARROWMAP_DXF_ARROW  
___________________________________________________________________________
___________________________________________________________________________
The configuration file is : d:\APPLICATIONS\ME10\dxf\DXF.con
The message file is       : d:\APPLICATIONS\ME10\dxf\DXF.ms

The source file is        : .\00.TMP.dxf
The destination file is   : J:\VAULT\WESTERNFLYER\100057.dwg
The log file is           : J:\VAULT\WESTERNFLYER\100057.log
___________________________________________________________________________


No errors encountered during translation.