.. _bw2099: OAK-SoM-Pro =========== `Buy it on Luxonis shop `__ .. image:: /_static/images/BW2099/BW2099.png Overview ******** The **OAK-SoM-Pro** is a System on Module (SoM) designed for integration into top-level system with a need for a low-power, 4 Tera Operation Per Second (TOPS) AI vision system. To be used in industrial automation, robotics and security systems. The OAK-SoM-Pro interfaces with the system through two 10-Gbps-rated 100-pin board-to-board mezzanine connector which carries all signal I/O as well as 5v input. The on-board SMPS system regulates the 5V input and provides all necessary digital and analog power. An auxiliary power port is offered to interface without connection to a baseboard. Devices that use OAK-SoM-Pro **************************** All devices that have SoM on-board are also open-source. You could redesign them, for example to change stereo baseline. If you are interested in integrating DepthAI (via SoM) into your product, see :ref:`documentation here `. - :ref:`OAK-1-PoE` - :ref:`OAK-D-PoE` - :ref:`OAK-FFC-4P` - :ref:`OAK-D CM4 PoE` .. include:: /pages/includes/mx_inside.rst Board Layout ************ .. image:: /_static/images/BW2099/BW2099_diag.jpg Dimensions and Weight ********************* * Width: 30 mm * Height: 45 mm * Length: 4 mm * Weight: 5g .. image:: /_static/images/BW2099/BW2099_dimm.jpg Key features ************ * Interfaces with the system through two 10-Gbps-rated 100-pin connectors (DF40C-100DP-0.4V(51)) * 2 x 2-lane MIPI channels * 2 x 4-lane MIPI channels (for multiple camera inputs) * USB 3.1 Gen 2 * Multiple Boot Modes supported: NOR, USB, Ethernet (EEPROM), or eMMC * eMMC is not populated by default but could be with Factory Special Order (send us an e-mail) * SD-card supported * Design files produced with Altium Designer 20 Datasheets ********** * `Datasheet `__ 3D Models ********* - Board STEP files `here `__ Altium Design Files ******************* See files `here `__ .. include:: /pages/includes/footer-short.rst