.. _dm2399: OAK-SoM-Pro-KB ============== .. image:: /_static/images/SOM-Pro-KB/board-back.png Overview ******** **OAK-SoM-Pro-KB** has on-board :ref:`Keem Bay VPU `, which has **much greater AI performance** compared to Myriad X, and **quadcore ARM CPU**. It was designed to have the same dimensions and pintout as the :ref:`OAK-SoM-Pro`, so it can easily replace the :ref:`OAK-SoM-Pro` on OAK cameras that use it (:ref:`list here `). It was primarily designed for evaluation and backwards compatibility. For new products, we would suggest using :ref:`OAK-SoM-Max` (differences :ref:`here `). The OAK-SoM-Pro-KB is a System on Module (SoM) designed for integration into top-level system with a need for a low-power, high performance, real-time AI and depth perception. The OAK-SoM-Pro-KB interfaces with the system through two 10-Gbps-rated 100-pin board-to-board mezzanine connector which carries all signal I/O as well as 5v input. The on-board SMPS system regulates the 5V input and provides all necessary digital and analog power. An auxiliary power port is offered to interface without connection to a baseboard. .. include:: /pages/includes/som-pro-kb-vs-max.rst Board Layout ************ .. image:: /_static/images/BW2099/BW2099_diag.jpg Dimensions and Weight ********************* * Width: 30 mm * Height: 45 mm * Length: 4 mm * Weight: 5g Key features ************ * :ref:`Keem Bay VPU ` * 2 GB RAM (16GBit) * Interfaces with the system through two 10-Gbps-rated 100-pin connectors (DF40C-100DP-0.4V(51)) * 2 x 2-lane MIPI channels * 2 x 4-lane MIPI channels (for multiple camera inputs) * USB 3.1 Gen 2 * Multiple Boot Modes supported: NOR, USB, Ethernet (EEPROM), or eMMC * SD-card supported * Design files produced with Altium Designer 20 .. image:: /_static/images/SOM-Pro-KB/on-FFC-4P.png **OAK-SoM-Pro-KB** on the :ref:`OAK-FFC-4P` baseboard, which has OAK-SoM-Pro integrated by default. Files ***** See files `here `__ .. include:: /pages/includes/footer-short.rst