Index of /internal/projects/902204_CoMPAS/ME.Drawings/MiniROV/CoreVehicle

[ICO]NameLast modifiedSizeDescription
[PARENTDIR]Parent Directory  -  
[ ]0019080601-054.sldprt2024-05-08 14:08 294K 
[ ]002 oring.SLDPRT2024-05-08 09:39 176K 
[ ]050-008-BD Piston Rod End.sldprt2024-08-19 14:57 37K 
[ ]050-014-CD Jaw Support Plate.sldprt2024-08-19 14:57 72K 
[ ]050-017-_D Jaw Pin Outer.sldprt2024-08-19 14:57 28K 
[ ]050-018-_D Jaw Pin Inner.sldprt2024-08-19 14:57 30K 
[ ]050-023-AD Jaw Pivot Bush.sldprt2024-08-19 14:57 28K 
[ ]1.5_ANGLE.SLDPRT2024-08-19 14:57 55K 
[ ]1.sldprt2024-08-01 14:12 26K 
[ ]2.sldprt2024-08-01 14:12 38K 
[ ]2x_strut_bracket.SLDPRT2024-05-08 14:08 121K 
[ ]3.sldprt2024-08-01 14:12 514K 
[ ]3_16 dowel pin.SLDPRT2024-08-19 14:57 78K 
[ ]4.sldprt2024-08-01 14:12 49K 
[ ]4k cam bracket.SLDPRT2024-05-08 14:08 95K 
[ ]5.sldprt2024-08-01 14:12 50K 
[ ]14 Inch Toolsled Rib.SLDPRT2024-07-16 16:43 177K 
[ ]14 Inch Toolsled Side_manipulator.SLDPRT2024-08-19 14:57 125K 
[ ]235-401.sldprt2024-05-08 14:08 149K 
[ ]400-001-ASY Arm 5E Standard.SLDASM2024-06-24 10:56 1.1M 
[ ]400-009-A-__ Slew Plate Left Hand.sldprt2024-08-01 14:12 43K 
[ ]400-009-B-__ Slew Plate Right Hand.sldprt2024-08-01 14:12 43K 
[ ]400-010-_D.sldprt2024-08-01 14:12 44K 
[ ]400-022-__ LH Upper Arm Side Plates.sldprt2024-08-01 14:12 87K 
[ ]400-022-__ RH Upper Arm Side Plates.sldprt2024-08-01 14:12 84K 
[ ]401-000-AD.sldprt2024-08-01 14:12 32K 
[ ]401-006-AD.sldprt2024-08-01 14:12 34K 
[ ]401-012-AD.sldprt2024-08-01 14:12 38K 
[ ]401-020-AD.sldprt2024-08-01 14:12 47K 
[ ]401-020-AD Long.sldprt2024-08-01 14:12 42K 
[ ]402-001-BD Jaw Housing Unit.sldprt2024-08-19 14:57 59K 
[ ]402-003-AD Motor Mounting Plate.sldprt2024-08-19 14:57 34K 
[ ]402-004-AD Bearing Housing.sldprt2024-08-19 14:57 51K 
[ ]402-005-AD Seal Plate.sldprt2024-08-19 14:57 32K 
[ ]402-005-AD Washer.sldprt2024-08-19 14:57 27K 
[ ]402-006-AD Universal Jaw Mount.sldprt2024-08-19 14:57 40K 
[ ]402-021-CD Elbow End Cap.sldprt2024-08-01 14:12 73K 
[ ]404-002-BD Jaw Block Small.sldprt2024-08-19 14:57 50K 
[ ]404-003-_D Type 1 Cutter Jaw Plates.sldprt2024-08-19 14:57 33K 
[ ]404-003-_D Type 2 Cutter Jaw Plates.sldprt2024-08-19 14:57 34K 
[ ]404-004-AD Jaw Link.sldprt2024-08-19 14:57 29K 
[ ]404-005-BD Cutter Jaw.sldprt2024-08-19 14:57 38K 
[ ]404-006-BD Cutter Jaw.sldprt2024-08-19 14:57 37K 
[ ]404-007-AD Type 1 Cutter Jaw.sldprt2024-08-19 14:57 34K 
[ ]404-007-AD Type 2 Cutter Jaw.sldprt2024-08-19 14:57 35K 
[ ]404-008-AD Jaw Block Large.sldprt2024-08-19 14:57 46K 
[ ]421-021-AD Slew Cable Entry.sldprt2024-08-19 14:57 151K 
[ ]738-108.sldprt2024-05-08 14:08 1.3M 
[ ]742-111.sldprt2024-05-08 14:08 204K 
[ ]750 315.SLDPRT2024-05-08 14:08 380K 
[ ]750_477.sldprt2024-05-08 14:08 555K 
[ ]789_304.sldprt2024-05-08 14:08 546K 
[ ]907_assembly.SLDASM2024-05-08 14:08 10M 
[ ]907_boards^907_assembly.SLDPRT2024-05-08 14:08 22M 
[ ]3202_ATN9.sldasm2024-05-08 09:39 266K 
[ ]3202_ATN9_PART1.sldprt2024-05-08 09:39 179K 
[ ]3202_ATN9_PART2.sldprt2024-05-08 09:39 165K 
[ ]3202_ATN9_PART3.sldprt2024-05-08 09:39 114K 
[ ]3202_ATN9_PART4.sldprt2024-05-08 09:39 114K 
[ ]5463K249.SLDPRT2024-05-08 14:08 634K 
[ ]5463K257.SLDPRT2024-05-08 14:08 1.0M 
[ ]5972K242.SLDPRT2024-05-08 09:39 837K 
[ ]25008r7-VxxAxxxxxxBL.SLDPRT2024-05-08 14:08 636K 
[ ]60355K220.SLDPRT2021-08-31 08:28 693K 
[ ]60355K509.SLDPRT2021-08-31 08:28 690K 
[ ]72510s.SLDPRT2024-05-08 09:39 650K 
[ ]93576A180.SLDPRT2021-08-31 08:28 136K 
[ ]94065K420.SLDPRT2024-05-08 09:39 57K 
[ ]97345A183.SLDPRT2024-05-08 09:39 636K 
[ ]97395A418.SLDPRT2021-08-31 08:28 78K 
[ ]98394A443.SLDPRT2021-08-31 08:28 111K 
[ ]98455A134.SLDPRT2024-05-08 09:39 80K 
[ ]98541A410.SLDPRT2024-05-08 09:39 94K 
[ ]99142A630.SLDPRT2024-05-08 09:39 83K 
[ ]11021204ra_vicormicro_solid.SLDPRT2024-05-08 14:08 330K 
[ ]A-201022-11-Core-Vehicle.SLDASM2023-03-13 14:35 31M 
[ ]A-201022-11.SLDASM2024-08-22 13:46 38M 
[ ]ASME B18.21.2M 6.sldprt2024-08-19 14:57 29K 
[ ]Actuator 1.sldasm2024-08-19 14:57 254K 
[ ]Actuator 2.sldasm2024-08-19 14:57 250K 
[ ]Actuator 3.sldasm2024-08-19 14:57 190K 
[ ]Actuator plate.sldprt2024-08-19 14:57 29K 
[ ]Actuatotor bush.sldprt2024-08-01 14:12 31K 
[ ]Actuatotor pin.sldprt2024-08-01 14:12 32K 
[ ]BS 4168 _ Part 1 Hexagon Socket Head Cap Screw - Metric M5 x 25.sldprt2024-08-19 14:57 34K 
[ ]Brace Slew Support.sldprt2024-08-19 14:57 27K 
[ ]Bumper.SLDPRT2018-04-20 08:29 81K 
[ ]Bush Top Hat.sldprt2024-08-01 14:12 28K 
[ ]CCP-A 600 Bar.SLDASM2024-05-08 14:08 726K 
[ ]CCP-A 600 Bar.sldprt2024-05-08 14:08 152K 
[ ]CMC-P0551X 000XXX.SLDASM2021-08-31 08:28 74K 
[ ]CMC-P0551X 000XXX_ROTOR(p0551).sldprt2021-08-31 08:28 67K 
[ ]CMC-P0551X 000XXX_STATOR(p0551).sldprt2021-08-31 08:28 82K 
[ ]CMC-P0653A 000XXX_ROTOR(P0653).sldprt2024-05-08 09:39 165K 
[ ]CMC-P0653A 000XXX_STATOR(P0653).sldprt2024-05-08 09:39 99K 
[ ]Carbon Fiber Arm.SLDPRT2024-08-19 14:57 246K 
[ ]Clevis.SLDPRT2018-04-20 08:29 190K 
[ ]Compensator_rev2.SLDASM2024-06-24 10:56 606K 
[ ]Controller assembly.sldasm2024-08-19 13:17 3.2M 
[ ]Crydom_104701.SLDPRT2024-05-08 14:08 2.7M 
[ ]DIN 125-1 A A 6.4.sldprt2024-08-19 14:57 28K 
[ ]DIN 471 _ 9mm _= 300mm 12 x 1.sldprt2024-08-19 14:57 31K 
[ ]DRAWER FIBER CHANNEL.SLDPRT2024-08-01 14:12 71K 
[ ]DSPL_LED.SLDPRT2017-01-20 09:20 203K 
[ ]Drawer SLW_1040_1.SLDASM2024-06-24 10:56 357K 
[ ]EC-i_40_70w motor.SLDPRT2024-08-19 14:57 103K 
[ ]EPOD.SLDASM2024-08-22 13:46 20M 
[ ]EPOD 25MM FAN.SLDPRT2024-05-08 14:08 4.8M 
[ ]EPOD 40MM FAN_EMBPASPST.SLDPRT2017-01-20 09:33 4.3M 
[ ]EPOD 280_651.sldprt2024-05-08 14:08 222K 
[ ]EPOD ENDCAP.SLDPRT2024-05-08 14:08 606K 
[ ]EPOD FAN BRACKET.SLDPRT2024-05-08 14:08 168K 
[ ]EPOD INTERNALS.SLDASM2024-08-22 13:46 5.3M 
[ ]EPOD TI RING.SLDPRT2024-05-08 14:08 370K 
[ ]EPOD TI housing.SLDPRT2024-05-08 14:08 204K 
[ ]Encoder 16 easy.SLDPRT2024-08-19 14:57 77K 
[ ]FCR-A 600 BAR.SLDPRT2024-05-08 14:08 1.2M 
[ ]Fitting_Mounting Connector.SLDPRT2018-05-04 07:58 861K 
[ ]Foam_Block_Front_Port_Upper.SLDPRT2024-08-01 14:11 116K 
[ ]Foam_Block_Front_Starboard_Lower.SLDPRT2024-08-02 13:51 102K 
[ ]Foam_Block_Front_Starboard_Upper.SLDPRT2024-08-01 14:00 115K 
[ ]Forged Hexagon Socket Flat Countersunk Head Cap Screws - Metric M6x10.sldprt2024-08-19 14:57 31K 
[ ]Forged Socket Head Cap Screw - Metric M6x1 x 20.sldprt2024-08-19 14:57 34K 
[ ]Forged Socket Head Cap Screw - Metric M6x1 x 25.sldprt2024-08-19 14:57 34K 
[ ]Forged Socket Head Cap Screw - Metric M6x1 x 55.sldprt2024-08-19 14:57 34K 
[ ]Full Half Slider Rev A.SLDPRT2018-04-20 08:29 313K 
[ ]Full Mechanism Rev A.SLDASM2018-04-20 08:29 280K 
[ ]GP 42 C gear.SLDPRT2024-08-01 14:12 136K 
[ ]HUMIDITY SENSOR.SLDPRT2024-05-08 14:08 81K 
[ ]Hook.SLDPRT2018-04-20 08:29 88K 
[ ]IS 1862 M6 x 35.sldprt2024-08-19 14:57 27K 
[ ]LIFT ARM DONUT.SLDPRT2024-05-08 14:08 216K 
[ ]LIFT ARM PIVOT.SLDPRT2024-05-08 14:08 275K 
[ ]LIFT ARM STRAIN RELIEF_Assem.SLDASM2024-05-08 14:08 647K 
[ ]LIFT ARM TOP PIVOT.SLDPRT2024-05-08 14:08 482K 
[ ]MANIP ANGLE MOUNT.SLDPRT2024-08-01 14:12 65K 
[ ]MANIPULATOR MOUNT ASSEMBLY.SLDASM2024-06-24 10:56 1.1M 
[ ]MINO-CCP-PBOF-RA.SLDPRT2024-05-08 14:08 1.1M 
[ ]MINO-FCR.SLDPRT2024-05-08 14:08 452K 
[ ]Manipulator Pin_944dia.SLDPRT2024-08-01 14:12 146K 
[ ]Mini ROV Sonar Mount.SLDPRT2024-05-08 14:08 839K 
[ ]Mounting Slew to Shoulder.sldprt2024-08-19 14:57 34K 
[ ]New 400-001-ASY Arm Assembly.sldasm2024-08-19 14:57 68K 
[ ]P-201016-11.sldprt2017-01-20 09:20 364K 
[ ]P-201021-11.sldprt2024-05-08 14:08 105K 
[ ]PMCD1004.sldasm2024-05-08 09:39 146K 
[ ]PMCD1004_BODY.sldprt2024-05-08 09:39 202K 
[ ]PMC_LATCH.sldprt2024-05-08 09:39 140K 
[ ]Part6.sldprt2024-05-08 14:08 38K 
[ ]Pin Slew.sldprt2024-08-19 14:57 26K 
[ ]Pint Comp Piston.SLDPRT2024-08-01 14:12 66K 
[ ]Pint Comp Retainer.SLDPRT2024-08-01 14:12 128K 
[ ]Pint Comp base.SLDPRT2024-08-01 14:12 339K 
[ ]Plate Cover Slew Pin.sldprt2024-08-01 14:12 29K 
[ ]Plate Slew Chassis.sldprt2024-08-01 14:12 46K 
[ ]Push Core Cap.SLDPRT2024-08-19 14:57 212K 
[ ]Push Core Flapper.SLDPRT2024-08-19 14:57 64K 
[ ]Push Core Quiver.SLDPRT2024-08-19 14:57 112K 
[ ]Push Core Quiver Base.SLDPRT2024-08-19 14:57 74K 
[ ]Push Core Quiver and Tube.SLDASM2024-08-19 14:57 318K 
[ ]Push Core Rubber Flapper Seal.SLDPRT2024-08-19 14:57 60K 
[ ]Push Core Tee Handle.SLDPRT2024-08-19 14:57 216K 
[ ]Push Core Tube.SLDPRT2024-08-19 14:57 65K 
[ ]Quiver Holder.sldprt2024-08-19 14:57 168K 
[ ]Reciever Rev A.SLDPRT2018-04-20 08:29 130K 
[ ]Resolver body.SLDPRT2024-05-08 09:39 92K 
[ ]Resolver rotor.SLDPRT2024-05-08 09:39 68K 
[ ]S62GFR-050131R.SLDPRT2024-05-08 14:08 118K 
[ ]SDP_a_6a_4-24df05016.SLDPRT2019-03-28 07:36 546K 
[ ]SS SPIDER.SLDPRT2019-04-22 10:43 251K 
[ ]STRAIN RELIEF.SLDPRT2024-05-08 14:08 73K 
[ ]SULIS Z70_assembly.SLDPRT2024-05-08 14:08 1.8M 
[ ]Seal ring.SLDPRT2024-05-08 09:39 120K 
[ ]Shoulder Assy Standard.sldasm2024-08-19 14:57 207K 
[ ]Shroud assembly.sldasm2018-04-18 14:52 166K 
[ ]Slew Actuator Back Cover.sldprt2024-08-19 14:57 43K 
[ ]Slew Actuator Front Cover.sldprt2024-08-01 14:12 43K 
[ ]Slew Actuator Plate.sldprt2024-08-19 14:57 33K 
[ ]Slew Base.sldasm2024-08-19 14:57 131K 
[ ]Slew Pin.sldprt2024-08-01 14:12 27K 
[ ]Slew Pivot Standard.sldasm2024-08-19 14:57 168K 
[ ]Sonar Mount Nut.SLDPRT2024-05-08 14:08 207K 
[ ]Swing Arm.SLDASM2024-08-13 17:18 2.9M 
[ ]Swing Arm Main Mount.SLDPRT2024-08-19 14:57 1.8M 
[ ]Swing Arm Quiver Mount.SLDPRT2024-08-19 14:57 337K 
[ ]Swing Arm Tube Pivot Insert.SLDPRT2024-08-19 14:57 88K 
[ ]SwingArm_2.SLDASM2024-08-13 17:18 2.3M 
[ ]Swing arm motor mount.SLDPRT2024-08-01 14:12 261K 
[ ]Swivel Tab.SLDPRT2018-04-20 08:29 90K 
[ ]TILT HOUSING END CAP LID V2.SLDPRT2017-01-20 09:26 91K 
[ ]TILT HOUSING V2 ASSEMBLY.SLDASM2018-04-18 14:52 543K 
[ ]Thruster Mount Lid.SLDPRT2018-05-04 07:58 127K 
[ ]Thruster_Board_Mount.SLDPRT2018-05-04 07:58 344K 
[ ]Thruster assembly.SLDASM2024-09-24 11:55 5.1M 
[ ]Thumbs.db2026-06-08 13:39 1.8M 
[ ]Thuster_Junction Box.SLDASM2018-05-04 07:58 627K 
[ ]Tilt Housing end cap.SLDPRT2024-08-19 14:57 273K 
[ ]UMBILICAL_JBOX.SLDASM2024-05-08 14:08 1.3M 
[ ]UMBILICAL_JBOX.SLDPRT2024-05-08 09:39 674K 
[ ]UMBILICAL_JBOX FO BRACKET.SLDPRT2024-05-08 09:39 104K 
[ ]UMBILICAL_JBOX LID.SLDPRT2024-05-08 09:39 129K 
[ ]UMBILICAL_JBOX ST BARREL.SLDPRT2024-05-08 09:39 64K 
[ ]UMBILICAL_JBOX ST CONN.SLDPRT2024-05-08 09:39 55K 
[ ]UMBILICAL_JBOX TERMINAL.SLDPRT2017-01-20 09:20 200K 
[ ]WHISTLE.SLDPRT2024-05-08 09:39 819K 
[ ]Washer 1mm.sldprt2024-08-01 14:12 28K 
[ ]Wedge.SLDPRT2018-04-20 08:29 67K 
[ ]barb fitting 1 inch nylon.SLDPRT2024-05-08 14:08 962K 
[ ]bearing_resolver ring.SLDPRT2024-05-08 09:39 197K 
[ ]button anode_.75.SLDPRT2018-04-18 14:51 90K 
[ ]button anode assem.SLDASM2024-05-08 09:39 410K 
[ ]camera assembly.SLDASM2024-05-08 14:08 584K 
[ ]camera tilt.SLDASM2024-09-24 12:40 77K 
[ ]clevis pin w cotter_92401A715.SLDPRT2024-05-08 14:08 147K 
[ ]comp assembly.SLDASM2024-08-19 13:17 2.3M 
[ ]comp dome.SLDPRT2024-05-08 09:39 252K 
[ ]compensator bracket.SLDPRT2024-08-19 14:57 89K 
[ ]comp piston retainer plate.SLDPRT2024-05-08 09:39 147K 
[ ]comp support rod.SLDPRT2024-08-19 14:57 36K 
[ ]dcon_heading sensor.SLDPRT2024-05-08 09:39 68K 
[ ]delrin bushing_2705T310.SLDPRT2024-05-08 14:08 113K 
[ ]diagonal rod.SLDPRT2024-05-08 14:08 488K 
[ ]drawer_motor_adapter plate.SLDPRT2024-08-01 14:12 166K 
[ ]drawer box.SLDPRT2024-08-01 14:12 1.5M 
[ ]drawer gusset.SLDPRT2024-08-01 14:12 341K 
[ ]drawer main assembly.SLDASM2018-04-18 14:52 4.6M 
[ ]drawer motor assembly2.SLDASM2024-08-19 14:57 229K 
[ ]drawer motor endcap.SLDPRT2024-08-01 14:12 233K 
[ ]drawer motor housing2.SLDPRT2024-08-01 14:12 130K 
[ ]drawer motor oil seal.SLDPRT2024-08-19 14:57 157K 
[ ]drawer w_motor assembly.SLDASM2024-06-24 10:56 1.2M 
[ ]dspl_Ti_bracket.SLDPRT2017-01-20 09:26 177K 
[ ]dspl_bracket_rev2.SLDPRT2017-11-16 13:44 151K 
[ ]dspl dome protector.SLDASM2018-04-18 14:51 250K 
[ ]dspl nano led.SLDPRT2019-02-19 09:32 240K 
[ ]dvl.SLDPRT2018-04-20 08:28 137K 
[ ]elmo base plate.SLDPRT2024-05-08 09:39 149K 
[ ]elmofilterboardr0-3_solid-png.SLDPRT2018-05-04 07:53 143K 
[ ]elmo housing.SLDPRT2024-05-08 09:39 281K 
[ ]emi jbox base.SLDPRT2024-05-08 14:08 236K 
[ ]emi jobox assembly.SLDASM2024-05-08 14:08 565K 
[ ]emi jobox lid.SLDPRT2024-05-08 14:08 118K 
[ ]epod_baseplate.SLDPRT2024-05-08 14:08 346K 
[ ]epod_fuse_assemb.SLDASM2024-05-08 14:08 226K 
[ ]epod_fuse_pcb.SLDPRT2024-05-08 14:08 68K 
[ ]epod_rattler_mount.SLDPRT2024-05-08 14:08 210K 
[ ]epod_term_strip.SLDPRT2024-05-08 14:08 69K 
[ ]epod_term_strip_assem.SLDASM2024-08-22 13:46 348K 
[ ]epod_wago_shell.SLDPRT2024-05-08 14:08 228K 
[ ]epod back plate.SLDPRT2024-05-08 14:08 169K 
[ ]epod din rail.SLDPRT2024-05-08 14:08 107K 
[ ]flexlink pcb.SLDPRT2024-05-08 14:08 102K 
[ ]foam pack.sldprt2024-05-08 14:08 258K 
[ ]foam pack adapter.SLDPRT2024-08-13 10:34 797K 
[ ]foam pack front adapter.SLDASM2024-08-13 10:35 468K 
[ ]focal_907_baseplate.SLDPRT2024-05-08 14:08 519K 
[ ]frame base sheet.SLDPRT2024-05-08 14:08 504K 
[ ]frame bottom sheet.SLDPRT2024-11-22 14:51 1.0M 
[ ]frame bracket.SLDASM2024-09-24 12:40 182K 
[ ]fuse_72581-3f.SLDPRT2024-05-08 14:08 93K 
[ ]fuse terminal pcb bracket.SLDPRT2024-05-08 14:08 75K 
[ ]gas funnel relay 105401.SLDPRT2024-05-08 14:08 533K 
[ ]harmonic gear_motor side.SLDPRT2021-08-31 08:28 96K 
[ ]hd camera.SLDPRT2019-01-17 10:05 98K 
[ ]hd camera angle of view.SLDPRT2017-01-20 09:39 63K 
[ ]hd camera bracket.SLDPRT2019-01-16 12:11 267K 
[ ]hd camera bracket assembly.SLDASM2019-02-28 07:39 287K 
[ ]hd camera bracket spacer.SLDPRT2019-01-16 12:11 131K 
[ ]hd camera tilt rod.SLDPRT2019-01-17 10:05 41K 
[ ]heading sensor housing.SLDPRT2024-05-08 09:39 162K 
[ ]heading sensor housing assembly.SLDASM2024-08-12 16:52 183K 
[ ]heading sensor housing bracket.SLDPRT2017-01-20 09:20 230K 
[ ]heading sensor housing endcap.SLDPRT2024-05-08 09:39 226K 
[ ]housing.SLDPRT2024-05-08 09:39 233K 
[ ]insite 1t1000 camera.SLDPRT2024-05-08 14:08 84K 
[ ]insite it1000.SLDASM2024-08-12 16:52 73K 
[ ]lancer feedthru.SLDPRT2024-05-08 09:39 97K 
[ ]lancer nut.SLDPRT2024-05-08 14:08 64K 
[ ]large prop.SLDPRT2024-05-08 09:39 126K 
[ ]large subcon.SLDPRT2024-05-08 14:08 75K 
[ ]large subconn connector.SLDASM2024-05-08 14:08 92K 
[ ]laser mount.SLDPRT2024-05-08 14:08 95K 
[ ]lift arm.SLDPRT2024-05-08 14:08 208K 
[ ]lift frame assembly.SLDASM2024-05-08 14:08 155K 
[ ]lift frame box.SLDPRT2024-05-08 14:08 236K 
[ ]lift frame wing.SLDPRT2024-05-08 14:08 146K 
[ ]lighting jbox assembly.SLDASM2024-05-08 14:08 1.5M 
[ ]lighting jbox base.SLDPRT2024-05-08 14:08 383K 
[ ]lighting jbox lid.SLDPRT2024-05-08 14:08 132K 
[ ]lighting jbox shell.SLDPRT2024-05-08 14:08 409K 
[ ]littlefuse_lpsm_id.SLDPRT2024-05-08 14:08 120K 
[ ]main vehicle.SLDASM2018-04-18 14:52 4.2M 
[ ]manipulator bottle.SLDPRT2024-08-19 14:57 45K 
[ ]manipulator mounting plate.SLDPRT2024-08-01 14:12 72K 
[ ]manipulator toolskid assembly.SLDASM2024-08-22 11:12 7.9M 
[ ]manipulator toolskid bottom plate.SLDPRT2024-08-19 14:57 76K 
[ ]maxmotorshape.SLDPRT2024-08-19 14:57 87K 
[ ]maxom tilt shaft.SLDPRT2021-08-31 08:28 138K 
[ ]maxon motor shaft adapter.SLDPRT2024-08-19 14:57 78K 
[ ]micro vicor.SLDPRT2024-05-08 14:08 682K 
[ ]mink fcr.SLDPRT2024-05-08 09:39 114K 
[ ]motor assembly.sldasm2024-05-08 09:39 27K 
[ ]motor assembly_EC-i 40_70w.SLDASM2024-08-19 14:57 114K 
[ ]oil comp clampV3.SLDPRT2024-08-01 14:12 186K 
[ ]pc104 blank card.SLDPRT2024-05-08 14:08 64K 
[ ]pint comp bracket.SLDPRT2017-01-20 09:26 153K 
[ ]piston.SLDPRT2024-05-08 09:39 530K 
[ ]rattler4.SLDPRT2024-05-08 14:08 233K 
[ ]responder.SLDPRT2024-05-08 09:39 76K 
[ ]responder clamp.SLDPRT2024-05-08 14:08 824K 
[ ]rotary assembly.SLDASM2021-08-31 08:28 2.3M 
[ ]rotary direct drive shaft.SLDPRT2017-01-20 09:38 318K 
[ ]rotary direct drive thrust bearing collar.SLDPRT2017-01-20 09:38 238K 
[ ]rotary endcap.SLDPRT2021-08-31 08:28 169K 
[ ]rotary endcap2.SLDPRT2021-08-31 08:28 123K 
[ ]rotary motor housing.SLDPRT2021-08-31 08:28 251K 
[ ]rotary motor standoff screw.SLDPRT2021-08-31 08:28 83K 
[ ]rotary mount.SLDPRT2017-01-20 09:32 574K 
[ ]rotary shaft.SLDPRT2021-08-31 08:28 67K 
[ ]round vicor housing.SLDASM2024-05-08 14:08 1.5M 
[ ]rovtool_positioncontroller_110516.SLDPRT2024-08-19 14:57 5.1M 
[ ]seal.SLDPRT2024-05-08 09:39 60K 
[ ]seal_12x20x5mm.SLDPRT2024-08-19 14:57 102K 
[ ]seal cap.sldprt2024-05-08 09:39 1.2M 
[ ]shroud2.SLDPRT2017-01-20 09:12 663K 
[ ]shroud post.SLDPRT2024-05-08 09:39 86K 
[ ]side plate.SLDPRT2024-05-08 14:08 294K 
[ ]small prop.SLDPRT2017-12-01 07:34 102K 
[ ]small shroud.SLDPRT2024-05-08 09:39 239K 
[ ]sonar.SLDPRT2024-05-08 14:08 68K 
[ ]square maxon gear motor assembly.SLDASM2024-08-13 15:45 1.9M 
[ ]square maxon gear pivot shaft.SLDPRT2018-04-18 15:12 99K 
[ ]square motor endcap_1.SLDPRT2024-08-01 14:12 192K 
[ ]square motor endcap_2.SLDPRT2024-08-01 14:12 203K 
[ ]square motor housing.SLDPRT2024-08-01 14:12 519K 
[ ]ss bottom plate2.SLDPRT2019-02-19 09:32 118K 
[ ]ss bucket assembly.SLDASM2019-02-19 09:32 224K 
[ ]ss bucket bottom.SLDPRT2019-02-19 09:32 104K 
[ ]ss bucket lid.SLDPRT2019-02-19 09:32 250K 
[ ]ss bucket screen keeper.SLDPRT2019-02-19 09:32 187K 
[ ]ss bucket shell.SLDPRT2019-02-19 09:32 91K 
[ ]ss bucket top ring.SLDPRT2019-02-19 09:32 82K 
[ ]ss head2.SLDPRT2019-02-19 09:32 1.0M 
[ ]ss inner support rod.SLDPRT2019-04-22 10:43 93K 
[ ]ss motor jbox.SLDASM2023-03-13 14:39 590K 
[ ]ss motor jbox.SLDPRT2023-03-13 14:39 308K 
[ ]ss motor jbox lid.SLDPRT2023-03-13 14:39 136K 
[ ]ss retainer washer.SLDPRT2019-02-19 09:32 101K 
[ ]ss shroud.SLDPRT2023-03-13 14:39 252K 
[ ]ss square motor mount.SLDPRT2019-02-19 09:32 346K 
[ ]ss square motor mount assembly.SLDASM2019-04-22 10:43 2.0M 
[ ]ss suction motor assembly.SLDASM2023-03-13 15:01 4.0M 
[ ]ss suction sampler assem.SLDASM2019-04-22 10:43 10M 
[ ]ss top inner plate.SLDPRT2019-02-19 09:32 136K 
[ ]ss top plate.SLDPRT2019-02-19 09:32 151K 
[ ]standoff_.5.SLDPRT2024-05-08 14:08 65K 
[ ]strain relief collar.SLDPRT2024-05-08 14:08 163K 
[ ]strut rod_long.SLDPRT2024-05-08 14:08 65K 
[ ]subconn conn.SLDPRT2024-05-08 09:39 79K 
[ ]subconn locking sleave.SLDPRT2024-05-08 14:08 103K 
[ ]swing arm shaft key coupler.SLDPRT2024-08-01 14:12 122K 
[ ]syntactic block.SLDPRT2024-08-19 14:57 169K 
[ ]temp swing arm mount.SLDPRT2017-01-20 09:32 62K 
[ ]terminal strip.SLDPRT2024-05-08 14:08 72K 
[ ]terminal strip backing plate.SLDPRT2024-05-08 14:08 77K 
[ ]terminal strip track.SLDPRT2024-05-08 14:08 52K 
[ ]thruster comp base.SLDPRT2024-05-08 09:39 1.7M 
[ ]thruster mount.SLDPRT2024-05-08 14:08 365K 
[ ]thruster shaft.SLDPRT2024-05-08 09:39 120K 
[ ]thruster shaft assembly.SLDASM2024-05-08 09:39 1.0M 
[ ]tilt2 harmonic inner ring.SLDPRT2021-08-31 08:28 62K 
[ ]tilt2 resolver ring.SLDPRT2021-08-31 08:28 273K 
[ ]tilt lever arm.SLDPRT2017-01-20 09:14 260K 
[ ]tilt pillow block.SLDPRT2024-05-08 14:08 100K 
[ ]tilt rotary motor assembly.SLDASM2019-01-17 09:49 4.4M 
[ ]timing pully.SLDPRT2019-01-17 09:49 185K 
[ ]toolsed assembly.SLDASM2018-04-18 14:52 786K 
[ ]toolsled box rail.SLDPRT2019-02-19 09:32 57K 
[ ]toolsled box side.SLDPRT2019-04-22 10:43 222K 
[ ]toolsled rail.SLDPRT2018-04-18 14:52 173K 
[ ]toolsled rib.SLDPRT2018-04-18 14:52 471K 
[ ]toolsled side pannel.SLDPRT2018-04-18 14:52 554K 
[ ]umbilical_jbox gland fitting.SLDPRT2024-05-08 09:39 153K 
[ ]upper bumper rod.SLDPRT2024-05-08 14:08 54K 
[ ]vicor_maxi_carrier_SOLID.SLDPRT2024-05-08 14:08 570K 
[ ]vicor_micro_short_2015.SLDPRT2017-01-20 09:33 240K 
[ ]vicor_mini.SLDPRT2024-05-08 14:08 1.2M 
[ ]vicor jbox endcap ring.SLDPRT2024-05-08 14:08 117K 
[ ]vicor round heat sink.SLDPRT2024-05-08 14:08 657K 
[ ]vicor round jbox bracket.SLDPRT2024-05-08 14:08 81K 
[ ]vicor round jbox main endcap.SLDPRT2024-05-08 14:08 281K 
[ ]vicor round jbox retaining ring.SLDPRT2024-05-08 14:08 113K 
[ ]vicor round jbox small endcap.SLDPRT2024-05-08 14:08 212K 
[ ]vicor round jbox tube.SLDPRT2024-05-08 14:08 159K 
[ ]~$A-201022-11-Core-Vehicle.SLDASM2023-09-19 12:15 6  
Apache/2.4.52 (Ubuntu) Server at docs.mbari.org Port 80