oildyneStand4:
Screws that attach oildyneStandUpperPlate to oildyne pump need to be 10-24
91780A081_Alum.... needs to indicate that it is an altered item
    (maybe the altered part needs to have the part name as an assembly, and the parts that make up that assembly is the COTS item?)

motorizedValveSmall:
SwagelokSS-6P4T part needs to be changed from COTS to Altered Item
8-32 x 1.5" shcs that hold mvvalve plate and motor plate together (through standoffs) need to be 8-32x1.625 per earlier change order
titanium #4 washers?


#27 100221193_HexPRV_SAE4 needs to be an assembly that includes this part and the actual PRV from The Lee Company (part no:PCHR5510060S):
    SAE4_PRVassy
      100221193_HexPRV_SAE4
      5.5mmPRV_60bar_PCHR5510060S
      
*************************
2-22-19
      
#8 Screws through PumpMtgPlate into hex standoffs need to be .5". (eDrawing shows both .375" and .5")

M5 screws through EC90MountingPlate3 into EC90 motor need to be 12mm with added flat washer (.02-.05 thick) to prevent bottoming against exposed (WTF??) circuit board on motor. (On eDrawing they are specked as 8mm)

How is innerReservoirLeg mounted to endcap?  Assuming set screw?  8-32 x 1"


2/26/2019
SHCS through oildyneStandLowerPlate are spec'd as 3/4", but should be 5/8"

2/27/2019
innerBellowsBulkheadClampRing holes do not match/mate with the holes in the innerBellowsMtgPlate
No screws identified for this connection, either.  Should be 11/16?
Should this innerBellowsBulkheadClampRing be metal for the lower one?  Or .375 stock thickness?

holes in innerBellowsLowerBulkhead are 1/4-28 (and not tapped all the way through) and the beswick parts are 10-32

It seems that pump stand legs can remain at 3" instead of the 2.75" that is specified?  
The NPT fittings that screw into the filter to not bury as deep as drawn.

The NPT thread engagement for the 1/4NPT fitting into the filter in the drawing is different than the actual engagement
-The drawing shows .219 threads showing (meaning .375 thread engagement)
-The actual has and average of showing .303 showing (.3115, .2955, .2905, .3145) showing indicating a .291 thread engagement