$ Date Time State Comment Pressure Bel Pos Batt Volt CTD Temp CTD Sal LPS331 Press LPS311 Temp SHT21 Humid SHT21 Temp FLBB Topt Tphase Rphase NO3 pH LPF PVel Diff PVel LPF PAcc Press Avg Press Var PID SP PID PV PID Y1 PID Y2 PID I PID v PID u PID uCPS Batt Amps 12V Amps 3.3V Amps Debug GPS Irid Modem $ 28-Oct-2015 19:36:10.075 Init Mission Reset Controller Status Register Value = 65536 $ 28-Oct-2015 19:36:10.081 Init Mission File Name = \SD\2015-10-28T19-36-9 $ 28-Oct-2015 19:36:10.087 Init Mission Volume Total Size: 7939817472 $ 28-Oct-2015 19:36:10.093 Init Mission Volume Free Space: 7660109824 $ 28-Oct-2015 19:36:10.156 Init Mission PlatVel PID K = 80 $ 28-Oct-2015 19:36:10.237 Init Mission PlatVel PID Ti = 50000 $ 28-Oct-2015 19:36:10.317 Init Mission PlatVel PID Td = 10 $ 28-Oct-2015 19:36:10.398 Init Mission PlatVel PID Tf = 2 $ 28-Oct-2015 19:36:10.479 Init Mission PlatVel PID Tt = 100 $ 28-Oct-2015 19:36:10.560 Init Mission PlatVel PID B = 1 $ 28-Oct-2015 19:36:10.641 Init Mission PlatVel PID uLow = -50 $ 28-Oct-2015 19:36:10.721 Init Mission PlatVel PID uHigh = 50 $ 28-Oct-2015 19:36:10.802 Init Mission PlatVel PID h = 3 $ 28-Oct-2015 19:36:10.883 Init Mission Engr Logger Initialized $ 28-Oct-2015 19:36:13.969 Init Mission Sending CR/LF $ 28-Oct-2015 19:36:19.974 Init Mission Sending stopProfile $ 28-Oct-2015 19:36:19.979 Init Mission Sending pcutoff $ 28-Oct-2015 19:36:20.984 Init Mission Sending outputPTSyes $ 28-Oct-2015 19:36:21.990 Init Mission Sending tsWait $ 28-Oct-2015 19:36:22.995 Init Mission Reading Mission Configuration File $ 28-Oct-2015 19:36:23.001 Init Mission Recovery mode = True $ 28-Oct-2015 19:36:23.006 Init Mission Park Sample Period = 00:01:00 $ 28-Oct-2015 19:36:23.013 Init Mission Pressure table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:05:00, 7 $ 28-Oct-2015 19:36:23.021 Init Mission Ascend table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.083 Init Mission Ascend table 1 Pressure, PV, Park Time, sample list: 55, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.164 Init Mission Ascend table 2 Pressure, PV, Park Time, sample list: 50, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.245 Init Mission Ascend table 3 Pressure, PV, Park Time, sample list: 45, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.326 Init Mission Ascend table 4 Pressure, PV, Park Time, sample list: 40, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.407 Init Mission Ascend table 5 Pressure, PV, Park Time, sample list: 35, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.487 Init Mission Ascend table 6 Pressure, PV, Park Time, sample list: 30, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.568 Init Mission Ascend table 7 Pressure, PV, Park Time, sample list: 25, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.649 Init Mission Ascend table 8 Pressure, PV, Park Time, sample list: 20, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.730 Init Mission Ascend table 9 Pressure, PV, Park Time, sample list: 18, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.811 Init Mission Ascend table 10 Pressure, PV, Park Time, sample list: 16, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.892 Init Mission Ascend table 11 Pressure, PV, Park Time, sample list: 14, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:23.972 Init Mission Ascend table 12 Pressure, PV, Park Time, sample list: 12, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:24.053 Init Mission Ascend table 13 Pressure, PV, Park Time, sample list: 10, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:24.134 Init Mission Ascend table 14 Pressure, PV, Park Time, sample list: 8, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:24.215 Init Mission Ascend table 15 Pressure, PV, Park Time, sample list: 6, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:24.296 Init Mission Ascend table 16 Pressure, PV, Park Time, sample list: 4, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:24.377 Init Mission Ascend table 17 Pressure, PV, Park Time, sample list: 2, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:24.457 Init Mission Ascend table 18 Pressure, PV, Park Time, sample list: 0, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:36:27.547 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 13 Num commas: 0 $ 28-Oct-2015 19:36:20.005 Init Mission Unparsed SBE41 Message S>stopprofi $ 28-Oct-2015 19:36:27.569 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 15 Num commas: 0 $ 28-Oct-2015 19:36:21.021 Init Mission Unparsed SBE41 Message S>outputpts=y $ 28-Oct-2015 19:36:27.591 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 12 Num commas: 0 $ 28-Oct-2015 19:36:22.017 Init Mission Unparsed SBE41 Message S>tswait=2 $ 28-Oct-2015 19:36:27.800 Init Mission PTH Message 1256.611084 24.700000 19.012970 24.933079 $ 28-Oct-2015 19:36:28.014 Init Mission State Entry $ 28-Oct-2015 19:36:28.019 Init Mission Bellows Position = 68.579 Battery Voltage = 32.88 and Current = 0.213 32.875000 0.212500 $ 28-Oct-2015 19:36:28.233 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.578804 32.875000 0.212500 -100.000000 $ 28-Oct-2015 19:36:31.063 Init Mission Initializing FLBB $ 28-Oct-2015 19:36:33.276 Init Mission FLBB Message NaN Sending FLBB stop command $ 28-Oct-2015 19:36:33.285 Init Mission FLBB Message NaN Sending FLBB pkt command: $pkt 2 $ 28-Oct-2015 19:36:33.296 Init Mission FLBB Message NaN $ 28-Oct-2015 19:36:33.305 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 28-Oct-2015 19:36:33.315 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 28-Oct-2015 19:36:33.366 Init Mission FLBB Message NaN Ave 3 $ 28-Oct-2015 19:36:33.447 Init Mission FLBB Message NaN Pkt 2 $ 28-Oct-2015 19:36:33.528 Init Mission FLBB Message NaN Sending FLBB ave command: $ave 3 $ 28-Oct-2015 19:36:33.609 Init Mission FLBB Message NaN $ 28-Oct-2015 19:36:33.689 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 28-Oct-2015 19:36:33.770 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 28-Oct-2015 19:36:33.851 Init Mission FLBB Message NaN Ave 3 $ 28-Oct-2015 19:36:33.932 Init Mission FLBB Message NaN Pkt 2 $ 28-Oct-2015 19:36:34.215 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.579394 32.875000 0.186250 -100.000000 $ 28-Oct-2015 19:36:34.229 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.579394 32.875000 0.186250 -100.000000 $ 28-Oct-2015 19:36:37.260 Init Mission Bellows inside limits $ 28-Oct-2015 19:36:34.662 Init Mission SBE41 Message -0.030000 -0.03 0.000000 0.000000 -0.000000 -0.030000 0.000000 $ 28-Oct-2015 19:36:37.487 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.578924 32.900000 0.195000 -100.000000 $ 28-Oct-2015 19:36:40.819 Init Mission Extending Bellows 68.579770 $ 28-Oct-2015 19:36:42.029 Init Mission Extending Bellows 68.617696 $ 28-Oct-2015 19:36:43.241 Init Mission Extending Bellows 68.660478 $ 28-Oct-2015 19:36:44.452 Init Mission Extending Bellows 68.707868 $ 28-Oct-2015 19:36:45.662 Init Mission Extending Bellows 68.754722 $ 28-Oct-2015 19:36:46.872 Init Mission Extending Bellows 68.802178 $ 28-Oct-2015 19:36:48.082 Init Mission Extending Bellows 68.850345 $ 28-Oct-2015 19:36:49.294 Init Mission Extending Bellows 68.897803 $ 28-Oct-2015 19:36:50.505 Init Mission Extending Bellows 68.945679 $ 28-Oct-2015 19:36:51.715 Init Mission Extending Bellows 68.991005 $ 28-Oct-2015 19:36:53.426 Init Mission Retracting Bellows 69.037662 $ 28-Oct-2015 19:36:54.636 Init Mission Retracting Bellows 69.005812 $ 28-Oct-2015 19:36:55.848 Init Mission Retracting Bellows 68.966264 $ 28-Oct-2015 19:36:57.059 Init Mission Retracting Bellows 68.926314 $ 28-Oct-2015 19:36:58.269 Init Mission Retracting Bellows 68.884629 $ 28-Oct-2015 19:36:59.479 Init Mission Retracting Bellows 68.838245 $ 28-Oct-2015 19:37:00.689 Init Mission Retracting Bellows 68.797281 $ 28-Oct-2015 19:37:01.901 Init Mission Retracting Bellows 68.753604 $ 28-Oct-2015 19:37:03.112 Init Mission Retracting Bellows 68.708272 $ 28-Oct-2015 19:37:04.322 Init Mission Retracting Bellows 68.667331 $ 28-Oct-2015 19:37:07.555 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.623384 32.900000 0.171250 -100.000000 $ 28-Oct-2015 19:37:07.571 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:07.577 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.623384 32.900000 0.171250 -100.000000 $ 28-Oct-2015 19:37:10.608 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:10.830 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622947 32.900000 0.172500 -100.000000 $ 28-Oct-2015 19:37:13.663 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:13.871 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.621764 32.900000 0.177500 -100.000000 $ 28-Oct-2015 19:37:16.702 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:16.910 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.620316 32.900000 0.182500 -100.000000 $ 28-Oct-2015 19:37:19.741 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:19.950 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622113 32.900000 0.183750 -100.000000 $ 28-Oct-2015 19:37:22.765 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:23.066 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622123 32.900000 0.171250 -100.000000 $ 28-Oct-2015 19:37:25.780 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:26.083 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622457 32.900000 0.172500 -100.000000 $ 28-Oct-2015 19:37:28.798 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:28.981 Init Mission PTH Message 1259.081055 24.700000 18.974823 24.933079 $ 28-Oct-2015 19:37:29.379 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622746 32.900000 0.178750 -100.000000 $ 28-Oct-2015 19:37:31.895 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:32.195 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622359 32.900000 0.176250 -100.000000 $ 28-Oct-2015 19:37:34.910 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:35.210 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622738 32.900000 0.178750 -100.000000 $ 28-Oct-2015 19:37:37.927 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:38.228 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.621894 32.900000 0.173750 -100.000000 $ 28-Oct-2015 19:37:40.942 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:41.243 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622800 32.900000 0.172500 -100.000000 $ 28-Oct-2015 19:37:43.959 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:44.260 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622911 32.900000 0.171250 -100.000000 $ 28-Oct-2015 19:37:46.974 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:47.275 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622427 32.900000 0.172500 -100.000000 $ 28-Oct-2015 19:37:49.992 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:50.294 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622679 32.900000 0.175000 -100.000000 $ 28-Oct-2015 19:37:53.008 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:37:53.316 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 28-Oct-2015 19:37:53.116 Init Mission Unparsed SBE41 Message S>ds $ 28-Oct-2015 19:37:53.745 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 51 Num commas: 0 $ 28-Oct-2015 19:37:53.218 Init Mission Unparsed SBE41 Message firmware compilation date: 18 December 2007 09:20 $ 28-Oct-2015 19:37:54.152 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 56 Num commas: 0 $ 28-Oct-2015 19:37:53.279 Init Mission Unparsed SBE41 Message stop profile when pressure is less than = 2.0 decibars $ 28-Oct-2015 19:37:54.560 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 52 Num commas: 0 $ 28-Oct-2015 19:37:53.508 Init Mission Unparsed SBE41 Message automatic bin averaging at end of profile disabled $ 28-Oct-2015 19:37:54.966 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:37:53.509 Init Mission Unparsed SBE41 Message number of samples = 287 $ 28-Oct-2015 19:37:55.373 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 20 Num commas: 0 $ 28-Oct-2015 19:37:53.509 Init Mission Unparsed SBE41 Message number of bins = 0 $ 28-Oct-2015 19:37:55.778 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:37:53.510 Init Mission Unparsed SBE41 Message top bin interval = 10 $ 28-Oct-2015 19:37:56.191 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 28-Oct-2015 19:37:53.510 Init Mission Unparsed SBE41 Message top bin size = 10 $ 28-Oct-2015 19:37:56.596 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 28-Oct-2015 19:37:53.511 Init Mission Unparsed SBE41 Message top bin max = 100 $ 28-Oct-2015 19:37:57.003 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 28-Oct-2015 19:37:53.511 Init Mission Unparsed SBE41 Message middle bin interval = 50 $ 28-Oct-2015 19:37:57.408 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 22 Num commas: 0 $ 28-Oct-2015 19:37:53.708 Init Mission Unparsed SBE41 Message middle bin size = 50 $ 28-Oct-2015 19:37:57.816 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:37:53.709 Init Mission Unparsed SBE41 Message middle bin max = 1000 $ 28-Oct-2015 19:37:58.226 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:37:53.709 Init Mission Unparsed SBE41 Message bottom bin interval = 100 $ 28-Oct-2015 19:37:58.633 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:37:53.710 Init Mission Unparsed SBE41 Message bottom bin size = 100 $ 28-Oct-2015 19:37:59.038 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 36 Num commas: 0 $ 28-Oct-2015 19:37:53.711 Init Mission Unparsed SBE41 Message do not include two transition bins $ 28-Oct-2015 19:37:59.445 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 32 Num commas: 0 $ 28-Oct-2015 19:37:53.711 Init Mission Unparsed SBE41 Message do not include samples per bin $ 28-Oct-2015 19:37:59.850 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 38 Num commas: 0 $ 28-Oct-2015 19:37:53.937 Init Mission Unparsed SBE41 Message pumped take sample wait time = 2 sec $ 28-Oct-2015 19:38:00.258 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:37:53.938 Init Mission Unparsed SBE41 Message real-time output is PTS $ 28-Oct-2015 19:38:01.251 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622692 32.900000 0.172500 -100.000000 $ 28-Oct-2015 19:38:01.452 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:38:01.551 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.622692 32.900000 0.172500 -100.000000 $ 28-Oct-2015 19:38:04.466 Init Mission Sending SBE41 dc command $ 28-Oct-2015 19:38:04.774 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 28-Oct-2015 19:38:04.575 Init Mission Unparsed SBE41 Message S>dc $ 28-Oct-2015 19:38:05.203 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:38:04.656 Init Mission Unparsed SBE41 Message temperature: 09-oct-12 $ 28-Oct-2015 19:38:05.616 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:38:04.687 Init Mission Unparsed SBE41 Message TA0 = 3.212005e-05 $ 28-Oct-2015 19:38:06.023 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:38:04.717 Init Mission Unparsed SBE41 Message TA1 = 2.710063e-04 $ 28-Oct-2015 19:38:06.429 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:38:04.748 Init Mission Unparsed SBE41 Message TA2 = -2.206761e-06 $ 28-Oct-2015 19:38:06.836 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:38:04.968 Init Mission Unparsed SBE41 Message TA3 = 1.436900e-07 $ 28-Oct-2015 19:38:07.241 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 28-Oct-2015 19:38:04.969 Init Mission Unparsed SBE41 Message conductivity: 09-oct-12 $ 28-Oct-2015 19:38:07.649 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:38:04.970 Init Mission Unparsed SBE41 Message G = -9.713452e-01 $ 28-Oct-2015 19:38:08.054 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:38:04.970 Init Mission Unparsed SBE41 Message H = 1.428729e-01 $ 28-Oct-2015 19:38:08.461 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:38:04.971 Init Mission Unparsed SBE41 Message I = -3.602926e-04 $ 28-Oct-2015 19:38:08.866 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:38:04.971 Init Mission Unparsed SBE41 Message J = 4.629943e-05 $ 28-Oct-2015 19:38:09.279 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.166 Init Mission Unparsed SBE41 Message CPCOR = -9.570001e-08 $ 28-Oct-2015 19:38:09.690 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.167 Init Mission Unparsed SBE41 Message CTCOR = 3.250000e-06 $ 28-Oct-2015 19:38:10.103 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.167 Init Mission Unparsed SBE41 Message WBOTC = -8.290229e-07 $ 28-Oct-2015 19:38:10.508 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 55 Num commas: 1 $ 28-Oct-2015 19:38:05.168 Init Mission Unparsed SBE41 Message pressure S/N = 3588090, range = 2900 psia: 04-oct-12 $ 28-Oct-2015 19:38:10.916 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:38:05.169 Init Mission Unparsed SBE41 Message PA0 = 9.502019e-02 $ 28-Oct-2015 19:38:11.321 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:38:05.190 Init Mission Unparsed SBE41 Message PA1 = 1.398889e-01 $ 28-Oct-2015 19:38:11.756 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:38:05.395 Init Mission Unparsed SBE41 Message PA2 = -4.043459e-08 $ 28-Oct-2015 19:38:12.167 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.396 Init Mission Unparsed SBE41 Message PTCA0 = 4.041972e+01 $ 28-Oct-2015 19:38:12.580 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.396 Init Mission Unparsed SBE41 Message PTCA1 = -2.065459e-04 $ 28-Oct-2015 19:38:12.991 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.397 Init Mission Unparsed SBE41 Message PTCA2 = 1.354759e-03 $ 28-Oct-2015 19:38:13.404 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.398 Init Mission Unparsed SBE41 Message PTCB0 = 2.527550e+01 $ 28-Oct-2015 19:38:13.817 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.398 Init Mission Unparsed SBE41 Message PTCB1 = 1.100000e-03 $ 28-Oct-2015 19:38:14.228 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.593 Init Mission Unparsed SBE41 Message PTCB2 = 0.000000e+00 $ 28-Oct-2015 19:38:14.641 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.594 Init Mission Unparsed SBE41 Message PTHA0 = -6.951193e+01 $ 28-Oct-2015 19:38:15.052 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.595 Init Mission Unparsed SBE41 Message PTHA1 = 5.247121e-02 $ 28-Oct-2015 19:38:15.465 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:38:05.595 Init Mission Unparsed SBE41 Message PTHA2 = -6.547758e-07 $ 28-Oct-2015 19:38:15.876 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 29 Num commas: 0 $ 28-Oct-2015 19:38:05.596 Init Mission Unparsed SBE41 Message POFFSET = 0.000000e+00 $ 28-Oct-2015 19:38:17.074 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.621931 32.900000 0.175000 -100.000000 $ 28-Oct-2015 19:38:17.272 Init Mission Sending SBE41 dc command $ 28-Oct-2015 19:38:17.371 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.621931 32.900000 0.175000 -100.000000 $ 28-Oct-2015 19:38:20.489 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.621757 32.900000 0.171250 -100.000000 $ 28-Oct-2015 19:38:23.306 Init Mission Sending Optode Get All command $ 28-Oct-2015 19:38:21.219 Init Mission SBE41 Message -0.040000 -0.04 0.000301 0.003333 0.000009 -0.031429 0.000014 $ 28-Oct-2015 19:38:24.107 Init Mission Optode Message -0.040000 !%!Product Name,4330,1996,Optode Sensor $ 28-Oct-2015 19:38:24.108 Init Mission Optode Message -0.040000 Product Number,4330,1996,4330 $ 28-Oct-2015 19:38:24.108 Init Mission Optode Message -0.040000 Serial Number,4330,1996,1996 $ 28-Oct-2015 19:38:24.109 Init Mission Optode Message -0.040000 SW ID,4330,1996,1940006 $ 28-Oct-2015 19:38:24.109 Init Mission Optode Message -0.040000 SW Version,4330,1996,4,8,1 $ 28-Oct-2015 19:38:24.127 Init Mission Optode Message -0.040000 Node Description,4330,1996,Optode Sensor #1996 $ 28-Oct-2015 19:38:24.148 Init Mission Optode Message -0.040000 Owner,4330,1996, $ 28-Oct-2015 19:38:24.178 Init Mission Optode Message -0.040000 Salinity[PSU],4330,1996,0.00 $ 28-Oct-2015 19:38:24.219 Init Mission SBE41 Message -0.040000 -0.04 0.000805 0.000000 0.000039 -0.032857 0.000024 $ 28-Oct-2015 19:38:24.249 Init Mission Optode Message -0.040000 PhaseCoef,4330,1996,-1.360000E+00,1.000000E+00,0.000000E+00,0.000000E+00 $ 28-Oct-2015 19:38:24.270 Init Mission Optode Message -0.040000 FoilID,4330,1996,1206E $ 28-Oct-2015 19:38:24.518 Init Mission Optode Message -0.040000 FoilCoefA,4330,1996,-2.988314E-06,-6.137785E-06,1.684659E-03,-1.857173E-01,6.784399E-04,-5.597908E-07,1.040158E+01,-5.986907E-02,1.360425E-04,-4.776977E-07,-3.032937E+02,2.530496E+00,-1.267045E-02,1.040454E-04 $ 28-Oct-2015 19:38:24.739 Init Mission Optode Message -0.040000 FoilCoefB,4330,1996,-3.560390E-07,3.816713E+03,-4.475507E+01,4.386163E-01,-7.146342E-03,8.906235E-05,-6.343012E-07,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00 $ 28-Oct-2015 19:38:24.741 Init Mission Optode Message -0.040000 FoilPolyDegT,4330,1996,1,0,0,0,1,2,0,1,2,3,0,1,2,3,4,0,1,2,3,4,5,0,0,0,0,0,0,0 $ 28-Oct-2015 19:38:24.958 Init Mission Optode Message -0.040000 FoilPolyDegO,4330,1996,4,5,4,3,3,3,2,2,2,2,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0 $ 28-Oct-2015 19:38:24.960 Init Mission Optode Message -0.040000 SVUFoilCoef,4330,1996,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00 $ 28-Oct-2015 19:38:24.981 Init Mission Optode Message -0.040000 ConcCoef,4330,1996,-1.446043E+00,9.675803E-01 $ 28-Oct-2015 19:38:25.177 Init Mission Optode Message -0.040000 NomAirPress[hPa],4330,1996,1013.25 $ 28-Oct-2015 19:38:25.178 Init Mission Optode Message -0.040000 NomAirMix,4330,1996,0.20946 $ 28-Oct-2015 19:38:25.178 Init Mission Optode Message -0.040000 CalDataSat[Deg],4330,1996,32.69,9.89 $ 28-Oct-2015 19:38:25.179 Init Mission Optode Message -0.040000 CalDataAPress[hPa],4330,1996,936.496 $ 28-Oct-2015 19:38:25.180 Init Mission Optode Message -0.040000 CalDataZero[Deg],4330,1996,62.974,21.484 $ 28-Oct-2015 19:38:25.180 Init Mission Optode Message -0.040000 Mode,4330,1996,AiCaP $ 28-Oct-2015 19:38:25.201 Init Mission Optode Message -0.040000 Enable Sleep,4330,1996,Yes $ 28-Oct-2015 19:38:25.398 Init Mission Optode Message -0.040000 Enable Polled Mode,4330,1996,No $ 28-Oct-2015 19:38:25.399 Init Mission Optode Message -0.040000 Enable Text,4330,1996,Yes $ 28-Oct-2015 19:38:25.399 Init Mission Optode Message -0.040000 Enable Decimalformat,4330,1996,Yes $ 28-Oct-2015 19:38:25.400 Init Mission Optode Message -0.040000 Analog TempLimit[Deg.C],4330,1996,-5.00,35.00 $ 28-Oct-2015 19:38:25.401 Init Mission Optode Message -0.040000 Analog ConcLimit[Deg.C],4330,1996,0.00,800.00 $ 28-Oct-2015 19:38:25.422 Init Mission Optode Message -0.040000 Analog SatLimit[Deg.C],4330,1996,0.00,200.00 $ 28-Oct-2015 19:38:25.621 Init Mission Optode Message -0.040000 Analog PhaseLimit[Deg.C],4330,1996,10.00,70.00 $ 28-Oct-2015 19:38:25.622 Init Mission Optode Message -0.040000 Analog Output,4330,1996,O2Concentration $ 28-Oct-2015 19:38:25.623 Init Mission Optode Message -0.040000 Analog1 Coef,4330,1996,0.000000E+00,1.000000E+00 $ 28-Oct-2015 19:38:25.624 Init Mission Optode Message -0.040000 Analog2 Coef,4330,1996,0.000000E+00,1.000000E+00 $ 28-Oct-2015 19:38:25.645 Init Mission Optode Message -0.040000 Enable AirSaturation,4330,1996,Yes $ 28-Oct-2015 19:38:25.841 Init Mission Optode Message -0.040000 Enable Rawdata,4330,1996,Yes $ 28-Oct-2015 19:38:25.841 Init Mission Optode Message -0.040000 Enable Temperature,4330,1996,Yes $ 28-Oct-2015 19:38:25.842 Init Mission Optode Message -0.040000 Enable HumidityComp,4330,1996,Yes $ 28-Oct-2015 19:38:25.843 Init Mission Optode Message -0.040000 Enable SVUformula,4330,1996,No $ 28-Oct-2015 19:38:25.843 Init Mission Optode Message -0.040000 Interval[s],4330,1996,30.000 $ 28-Oct-2015 19:38:25.843 Init Mission Optode Message -0.040000 Location,4330,1996, $ 28-Oct-2015 19:38:25.865 Init Mission Optode Message -0.040000 Geographic Position,4330,1996,60.323605,5.37225 $ 28-Oct-2015 19:38:26.061 Init Mission Optode Message -0.040000 Vertical Position,4330,1996, $ 28-Oct-2015 19:38:26.061 Init Mission Optode Message -0.040000 Reference,4330,1996, $ 28-Oct-2015 19:38:26.062 Init Mission Optode Message -0.040000 # $ 28-Oct-2015 19:38:27.525 Init Mission SBE41 Message -3.570000 -3.57 0.107219 1.176667 0.003273 -0.538571 1.786881 $ 28-Oct-2015 19:38:34.879 Init Mission PTH Message 1258.553467 24.550000 18.974823 24.943804 $ 28-Oct-2015 19:38:30.244 Init Mission SBE41 Message -1.390000 -1.39 0.219760 -0.726667 0.012039 -0.732857 1.820557 $ 28-Oct-2015 19:38:33.276 Init Mission SBE41 Message -2.940000 -2.94 0.266468 0.516667 0.022438 -1.148571 2.348514 $ 28-Oct-2015 19:38:36.086 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -2.940000 68.621341 32.900000 0.175000 -100.000000 $ 28-Oct-2015 19:38:36.285 Init Mission Sending Optode Get All command $ 28-Oct-2015 19:38:36.386 Init Mission SBE41 Message -0.320000 -0.32 0.197223 -0.873333 0.026202 -1.190000 2.252400 $ 28-Oct-2015 19:38:36.789 Init Mission Normal state exit $ 28-Oct-2015 19:38:36.888 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.320000 68.621473 32.900000 0.170000 -100.000000 $ 28-Oct-2015 19:38:39.301 Init Profile State Entry $ 28-Oct-2015 19:38:39.400 Init Profile Resetting SBE41 with qs $ 28-Oct-2015 19:38:40.501 Init Profile Synching system time to GPS $ 28-Oct-2015 19:38:39.221 Init Profile SBE41 Message -0.050000 -0.05 -0.005278 -0.090000 0.014721 -1.192857 2.244724 $ 28-Oct-2015 19:38:56.410 Init Profile SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 4 Num commas: 0 $ 28-Oct-2015 19:38:40.600 Init Profile Unparsed SBE41 Message S> $ 28-Oct-2015 19:38:56.795 Init Profile SBE41 Message -0.650000 -0.65 -0.192690 0.200000 -0.012195 -1.280000 2.063467 $ 28-Oct-2015 19:38:57.201 Init Profile Normal state exit $ 28-Oct-2015 19:38:57.299 Init Profile RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.650000 68.621717 32.900000 0.172500 -100.000000 $ 28-Oct-2015 19:38:57.498 Surface Ops Set Bellows State Entry $ 28-Oct-2015 19:38:57.598 Surface Ops Set Bellows Inflating bellows to Surface Ops position = 67.700000000000003 $ 28-Oct-2015 19:38:57.792 Surface Ops Set Bellows Normal state exit $ 28-Oct-2015 19:38:57.891 Surface Ops Set Bellows RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.650000 68.621717 32.900000 0.172500 -100.000000 $ 28-Oct-2015 19:39:00.505 Pre-Mission Delay State Entry $ 28-Oct-2015 19:38:59.645 Pre-Mission Delay SBE41 Message -0.040000 -0.04 -0.233813 -0.203333 -0.039554 -1.280000 2.063467 $ 28-Oct-2015 19:39:01.007 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.040000 68.621493 32.900000 0.171250 -100.000000 $ 28-Oct-2015 19:39:02.651 Pre-Mission Delay SBE41 Message -0.030000 -0.03 -0.176843 -0.003333 -0.049351 -0.774286 1.151495 $ 28-Oct-2015 19:39:03.926 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.623671 32.900000 0.175000 -100.000000 $ 28-Oct-2015 19:39:05.651 Pre-Mission Delay SBE41 Message -0.040000 -0.04 -0.102107 0.003333 -0.037095 -0.581429 1.134781 $ 28-Oct-2015 19:39:06.944 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.040000 68.621402 32.900000 0.171250 -100.000000 $ 28-Oct-2015 19:39:08.647 Pre-Mission Delay SBE41 Message -0.050000 -0.05 -0.028010 0.003333 -0.011159 -0.168571 0.055848 $ 28-Oct-2015 19:39:09.962 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.050000 68.622314 32.900000 0.173750 -100.000000