/*!
LT3965 - Octal Matrix LED Bypass Switch

@verbatim

The LT3965 is an LED bypass switching device for dimming indiviadual LEDs in a
string using a common current source. It features eight individually controlled
floating source N-channel MOSFET switches rated for 17V/330 mΩ. The eight
switches can be connected in parallel and/or in series to bypass current around
one or more LEDs in a string. The LT3965 as a slave uses the I2C serial interface
to communicate with the master. Each of eight channels can be independently
programmed to bypass the LED string in constant on, constant off, dimming without
fade transition or dimming with fade transition mode.

@endverbatim

http://www.linear.com/product/LT3965

http://www.linear.com/product/LT3965#demoboards


Copyright 2018(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
 - Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
 - Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in
   the documentation and/or other materials provided with the
   distribution.
 - Neither the name of Analog Devices, Inc. nor the names of its
   contributors may be used to endorse or promote products derived
   from this software without specific prior written permission.
 - The use of this software may or may not infringe the patent rights
   of one or more patent holders.  This license does not release you
   from the requirement that you obtain separate licenses from these
   patent holders to use this software.
 - Use of the software either in source or binary form, must be run
   on or directly connected to an Analog Devices Inc. component.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

//! @ingroup Switching_Regulators
//! @{
//! @defgroup LT3965 LT3965: Octal Matrix LED Bypass Switch
//! @}

/*! @file
   @ingroup LT3965
   Library for LT3965 Octal Matrix LED Bypass Switch
*/

#include <stdio.h>
#include "Linduino.h"
#include "LT_I2C.h"
#include "LT3965.h"


// ACMODE Write Command to write a "value" byte to device at "address"
int8_t i2c_acwrite(uint8_t address, uint8_t value)
{
  int8_t ret = 0 ;
  address = address | AC_ADDR_0;
  ret |= i2c_write_byte(address, value);
  return ret;
}


// ACMODE Read Command to read 3 data bytes from device at "address"
int8_t i2c_acread(uint8_t address, uint8_t *values)
{
  int8_t ret = 0 ;
  address = address | AC_ADDR_0;
  ret |= i2c_read_block_data(address, 3, values);
  return ret;
}


// SCMODE Write Command Short Format to write a "value" byte to device at "address"
int8_t i2c_scwriteshort(uint8_t address, uint8_t channel, uint8_t data_SCMREG)
{
  int8_t ret = 0 ;
  uint8_t data = 0;

  address = address | SC_ADDR_0;
  data = (channel << 4) | data_SCMREG;      //Write value

  ret |= i2c_write_byte(address, data);
  return ret;
}


// SCMODE Write Command Long Format to write 2 "value" bytes to device at "address"
int8_t i2c_scwritelong(uint8_t address, uint8_t channel, uint8_t data_SCMREG, uint8_t dimming_value)
{
  int8_t ret = 0;
  uint8_t command = 0x80;

  address = address | SC_ADDR_0;
  command |= ((channel << 4) | data_SCMREG);

  ret |= i2c_write_byte_data(address, command, dimming_value);
  return ret;
}


// SCMODE Write Short + SCMODE Read Command
int8_t i2c_scwriteshort_scread(uint8_t address, uint8_t channel, uint8_t data_SCMREG, uint8_t *values)
{
  int8_t ret = 0;
  uint8_t command = 0;

  address = address | SC_ADDR_0;
  command |= ((channel << 4) | data_SCMREG);

  ret |= i2c_read_block_data(address, command, 2, values);
  return ret;
}


// BCMODE Read Command
int8_t i2c_bcread(uint8_t *value)
{
  int8_t ret = 0 ;
  uint8_t address = BC_ADDR;
  ret |= i2c_read_byte(address, value);
  return ret;
}