/*!
LTC2412: 2-Channel Differential Input 24-Bit No Latency Delta Sigma ADC
LTC2413: 24-Bit No Latency Delta Sigma ADC with Simultaneous 50Hz/60Hz Rejection ADC

@verbatim

The LTC2412 is a 2-channel differential input micropower 24-bit No Latency
Delta-Sigma analog-to-digital converter with an integrated oscillator. It
provides 2ppm INL and 0.16ppm RMS noise over the entire supply range. The two
differential channels are converted alternately with channel ID included in
the conversion results.

The converter accepts any external differential reference voltage from 0.1V to
VCC for flexible ratiometric and remote sensingmeasurement configurations. The
full-scale differential input range is from –0.5VREF to 0.5VREF. The LTC2412
communicates through a flexible 3-wire digital interface which is compatible
with SPI and MICROWIRE protocols.

SPI DATA FORMAT (MSB First):

            Byte #1                            Byte #2                           Byte #3                    Byte #4

Data Out :  !EOC CH SIG  D23 D22 D21 D20 D19   D18 D17 D16 D15 D14 D13 D12 D11   D10 D9 D8 D7 D6 D5 D4 D3   D2 D1 D0  X  X  X  X  X

!EOC : End of Conversion Bit (Active Low)
CH   : Channel selected
SIG  : Sign Bit (1-data positive, 0-data negative)
Dx   : Data Bits


Example Code:

Read Channel 0 in Single-Ended mode

    uint16_t miso_timeout = 1000;

    if(LTC2412_EOC_timeout(LTC2412_CS, miso_timeout))    // Check for EOC
        return(1);
    LTC2412_read(LTC2412_CS, &adc_code);   // Obtains the current reading and stores to adc_code variable

    // Convert adc_code to voltage
    adc_voltage = LTC2412_code_to_voltage(adc_code, LTC2412_lsb , LTC2412_offset_code);

@endverbatim

http://www.linear.com/product/LTC2412
http://www.linear.com/product/LTC2413

http://www.linear.com/product/LTC2412#demoboards
http://www.linear.com/product/LTC2413#demoboards


Copyright 2018(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
 - Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
 - Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in
   the documentation and/or other materials provided with the
   distribution.
 - Neither the name of Analog Devices, Inc. nor the names of its
   contributors may be used to endorse or promote products derived
   from this software without specific prior written permission.
 - The use of this software may or may not infringe the patent rights
   of one or more patent holders.  This license does not release you
   from the requirement that you obtain separate licenses from these
   patent holders to use this software.
 - Use of the software either in source or binary form, must be run
   on or directly connected to an Analog Devices Inc. component.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

/*! @file
    @ingroup LTC2412
    Header for LTC2412: 2-Channel Differential Input 24-Bit No Latency Delta Sigma ADC
*/

#ifndef LTC2412_H
#define LTC2412_H

#include <SPI.h>

//! Define the SPI CS pin
#ifndef LTC2412_CS
#define LTC2412_CS QUIKEVAL_CS
#endif

//! Checks for EOC with a specified timeout
//! @return 0=successful, 1=unsuccessful (exceeded timeout)
int8_t LTC2412_EOC_timeout(uint8_t cs,           //!< Chip Select pin
                           uint16_t miso_timeout //!< Timeout (ms)
                          );

//! Reads the LTC2412 result
//! @return void
void LTC2412_read(uint8_t cs,           //!< Chip Select pin
                  uint32_t *adc_code    //!< Returns raw 32-bit code read from ADC
                 );

//! Calculates the LTC2412 input voltage
//! @return Calculated voltage
float LTC2412_code_to_voltage(int32_t adc_code,           //!< Raw ADC code
                              float LTC2412_lsb,          //!< LSB value (volts)
                              int32_t LTC2412_offset_code //!< Offset (Code)
                             );

#endif  // LTC2412_H