/*! LTC4151: High Voltage I2C Current and Voltage Monitor @verbatim The LTC4151 is a high side power monitor that operates over a wide voltage range of 7V to 80V. In default operation mode, the onboard 12-bit ADC continuously measures high side current, input voltage and an external voltage. Data is reported through the I2C interface when polled by a host. The LTC4151 can also perform on-demand measurement in a snapshot mode. The LTC4151 features a dedicated shutdown pin to reduce power consumption. The LTC4151-1/LTC4151-2 feature split I2C data pins to drive opto-isolators. The data out on the LTC4151-1 is inverted while that on the LTC4151-2 is not. I2C DATA FORMAT (MSB FIRST); Data Out: Byte #1 Byte #2 Byte #3 START SA6 SA5 SA4 SA3 SA2 SA1 SA0 W SACK X X X X C3 C2 C1 C0 SACK D7 D6 D5 D4 D3 D2 D1 D0 SACK STOP Data In: Byte #1 Byte #2 Byte #3 MSB LSB START SA6 SA5 SA4 SA3 SA2 SA1 SA0 W SACK X X X X C3 C2 C1 C0 SACK REPEAT START SA6 SA5 SA4 SA3 SA2 SA1 SA0 R SACK Byte #4 Byte #5 D15 D14 D13 D12 D11 D10 D0 D8 MACK D7 D6 D5 D4 D3 D2 D1 D0 MNACK STOP START : I2C Start REPEAT START : I2C Repeat Start STOP : I2C Stop SACK : I2C Slave Generated Acknowledge (Active Low) MACK : I2C Master Generated Acknowledge (Active Low) MNACK : I2C Master Generated Not Acknowledge SAx : I2C Address W : I2C Write (0) R : I2C Read (1) Cx : Command Code Dx : Data Bits X : Don't care Example Code: @endverbatim http://www.linear.com/product/LTC4151 http://www.linear.com/product/LTC4151#demoboards Copyright 2018(c) Analog Devices, Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software. - Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component. THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /*! @file @ingroup LTC4151 Library Header File for LTC4151: High Voltage I2C Current and Voltage Monitor */ #ifndef LTC4151_H #define LTC4151_H #include //! Address Choices: //! To choose an address, comment out all options except the //! configuration on the demo board. /*! | LTC4151 I2C Address | Value | AD1 | AD2 | | :------------------ | :------: | :------: | :------: | | LTC4151_I2C_ADDRESS | 0x67 | High | Low | | LTC4151_I2C_ADDRESS | 0x68 | Float | High | | LTC4151_I2C_ADDRESS | 0x69 | High | High | | LTC4151_I2C_ADDRESS | 0x6A | Float | Float | | LTC4151_I2C_ADDRESS | 0x6B | Float | Low | | LTC4151_I2C_ADDRESS | 0x6C | Low | High | | LTC4151_I2C_ADDRESS | 0x6D | High | Float | | LTC4151_I2C_ADDRESS | 0x6E | Low | Float | | LTC4151_I2C_ADDRESS | 0x6F | Low | Low | | LTC4151_I2C_GLOBAL_ADDRESS | 0x66 | X | X | */ /*! @name I2C_Addresses @{ */ // Address assignment // LTC4151 I2C Address // AD1 AD0 // #define LTC4151_I2C_ADDRESS 0x67 // High Low // #define LTC4151_I2C_ADDRESS 0x68 // Float High // #define LTC4151_I2C_ADDRESS 0x69 // High High // #define LTC4151_I2C_ADDRESS 0x6A // Float Float // #define LTC4151_I2C_ADDRESS 0x6B // Float Low // #define LTC4151_I2C_ADDRESS 0x6C // Low High // #define LTC4151_I2C_ADDRESS 0x6D // High Float // #define LTC4151_I2C_ADDRESS 0x6E // Low Float #define LTC4151_I2C_ADDRESS 0x6F // Low Low // LTC4151 Global I2C Address. // #define LTC4151_I2C_GLOBAL_ADDRESS 0x66 // Global Address //! @} */ //! Note: Register 0x07 is Reserved. /*! | Registers | Location | Descrition | | :------------------------ | :-----------: | :---------------------------------------- | | LTC4151_SENSE_MSB_REG | 0x00 | ADC Current Sense Voltage Data (8 MSB) | | LTC4151_SENSE_LSB_REG | 0x01 | ADC Current Sense Voltage Data (4 LSB) | | LTC4151_VIN_MSB_REG | 0x02 | ADC V_IN Voltage Data (8 MSB) | | LTC4151_VIN_LSB_REG | 0x03 | ADC V_IN Voltage Data (4 LSB) | | LTC4151_ADIN_MSB_REG | 0x04 | ADC ADIN Voltage Data (8 MSB) | | LTC4151_ADIN_LSB_REG | 0x05 | ADC ADIN Voltage Data (4 LSB) | | LTC4151_CONTROL_REG | 0x06 | Controls ADC Operation Mode and Test Mode | */ /*! @name REGISTERS @{ */ // Registers #define LTC4151_SENSE_MSB_REG 0x00 // ADC Current Sense Voltage Data (8 MSB) #define LTC4151_SENSE_LSB_REG 0x01 // ADC Current Sense Voltage Data (4 LSB) #define LTC4151_VIN_MSB_REG 0x02 // ADC V_IN Voltage Data (8 MSB) #define LTC4151_VIN_LSB_REG 0x03 // ADC V_IN Voltage Data (4 LSB) #define LTC4151_ADIN_MSB_REG 0x04 // ADC ADIN Voltage Data (8 MSB) #define LTC4151_ADIN_LSB_REG 0x05 // ADC ADIN Voltage Data (4 LSB) #define LTC4151_CONTROL_REG 0x06 // Controls ADC Operation Mode and Test Mode //!@} */ //! Bitwise AND with channel register, and write to LTC4151_CONTROL_REG. /*! | Commands and Channel Registers | Value | Descrition | | :---------------------------- | :---: | :--------- | | LTC4151_CONTINUOUS_MODE | 0x00 | Sets LTC4151 in Continuous Mode | | LTC4151_SNAPSHOT_MODE | 0x80 | Sets LTC4151 in Snapshot Mode | | LTC4151_SENSE_CHANNEL_REG | 0x00 | ADC Sense Channel For Snapshot Mode | | LTC4151_VIN_CHANNEL_REG | 0x20 | DC V_IN Channel For Snapshot Mode | | LTC4151_ADIN_CHANNEL_REG | 0x40 | ADC ADIN Channel For Snapshot Mode | */ /*! @name LTC4151 Commands @{ */ #define LTC4151_SENSE_CHANNEL_REG 0x00 // ADC Sense Channel For Snapshot Mode #define LTC4151_VIN_CHANNEL_REG 0x20 // ADC V_IN Channel For Snapshot Mode #define LTC4151_ADIN_CHANNEL_REG 0x40 // ADC ADIN Channel For Snapshot Mode #define LTC4151_CONTINUOUS_MODE 0x00 #define LTC4151_SNAPSHOT_MODE 0x80 //! @} */ //! Write one byte to an LTC4151 register. //! @return Returns the state of the acknowledge bit after the I2C address write. 0=acknowledge, 1=no acknowledge. int8_t LTC4151_write(uint8_t i2c_address, //!< I2C address of the LTC4151. Configured by tying the ADR0 and ADR1 pins high or low. See Table 1 of datasheet. uint8_t adc_command, //!< The "command byte" for the LTC4151. uint8_t code //!< Value that will be written to the register. ); //! Reads a 12-bit value from LTC4151 //! @return Returns the state of the acknowledge bit after the I2C address write. 0=acknowledge, 1=no acknowledge. int8_t LTC4151_read_12_bits(uint8_t i2c_address, //!< I2C address of the LTC4151. Configured by tying the ADR0 and ADR1 pins high or low. See Table 1 of datasheet. uint8_t adc_command, //!< The "command byte" for the LTC4151. uint16_t *adc_code //!< Returns 12-bit value read from the adc ); //! Calculates the LTC4151 sense current in Amps given "resistor" value in ohms and "LTC4151_sense_lsb" LSB weight in volts. //! @return Returns the current in Amperes. float LTC4151_code_to_sense_current(uint16_t adc_code, //!< Code read from the adc (from a function such as LTC4151_read_12_bits) float resistor, //!< The sense resistor value float LTC4151_sense_lsb //!< Current LSB weight. ); //! Calculates the LTC4151 V_IN voltage given "LTC_vin_lsb" LSB weight in volts //! @return the V_IN voltage in volts. float LTC4151_code_to_vin_voltage(uint16_t adc_code, //!< Code read from the adc (from a function such as LTC4151_read_12_bits) float LTC4151_vin_lsb //!< Voltage LSB weight. ); //! Calculates the LTC4151 ADIN voltage in mV given "LTC4151_adin_lsb" LSB weight in mV //! @return the ADIN voltage in volts. float LTC4151_code_to_ADIN_voltage(uint16_t adc_code, //!< Code read from the adc (from a function such as LTC4151_read_12_bits) float LTC4151_adin_lsb //!< ADIN voltage LSB weight. ); #endif // LTC4151_H