/*! LTC6947: Ultralow Noise and Spurious 0.35GHz to 6GHz FracN Synthesizer @verbatim The LTC®6947 is a high performance, low noise, 6GHz phase-locked loop (PLL), including a reference divider, phase-frequency detector (PFD), ultralow noise charge pump, fractional feedback divider, and VCO output divider. The fractional divider uses an advanced, 4th order ΔΣ modulator which provides exceptionally low spurious levels. This allows wide loop bandwidths, producing extremely low integrated phase noise values. The programmable VCO output divider, with a range of 1 through 6, extends the output frequency range. @endverbatim http://www.linear.com/product/LTC6947 http://www.linear.com/product/LTC6947#demoboards Copyright 2018(c) Analog Devices, Inc. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: - Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. - Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. - Neither the name of Analog Devices, Inc. nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. - The use of this software may or may not infringe the patent rights of one or more patent holders. This license does not release you from the requirement that you obtain separate licenses from these patent holders to use this software. - Use of the software either in source or binary form, must be run on or directly connected to an Analog Devices Inc. component. THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ //! @ingroup RF_Timing //! @{ //! @defgroup LTC6947 LTC6947: Ultralow Noise and Spurious 0.35GHz to 6GHz FracN Synthesizer //! @} /*! @file @ingroup LTC6947 Library for LTC6947: Ultralow Noise and Spurious 0.35GHz to 6GHz FracN Synthesizer */ #include #include #include "Linduino.h" #include "UserInterface.h" #include "LT_SPI.h" #include "LTC6947.h" #include uint8_t LTC6947_reg[LTC6947_NUM_REGADDR]; //!< number of LTC6947 spi addresses uint8_t LTC6947_spi_map[(LTC6947_NUM_REGFIELD+1)][4]; //!< LTC6947 spi map, stores MSB address location, MSB bit location, field length in bits, and R or RW capability unsigned long LTC6947_Fref_MHz = 100; //!< Default Fref frequency - MHz portion (xxx); Fref = xxx, yyy,yyy unsigned long LTC6947_Fref_Hz = 0; //!< Default Fref frequency - Hz portion (yyy,yyy); Fref = x,xxx, yyy,yyy unsigned long LTC6947_Frf_MHz = 2415; //!< Default Frf frequency - MHz portion (xxxx); Frf = x,xxx, yyy,yyy unsigned long LTC6947_Frf_Hz = 0; //!< Default Frf frequency - Hz portion (yyy,yyy); Frf = x,xxx, yyy,yyy unsigned long LTC6947_VCO_Max_Freq_MHz = 2536; //!< Max Vco frequency for default on board VCO - MHz portion (xxxx); Fvco max = xxx, yyy,yyy unsigned long LTC6947_VCO_Min_Freq_MHz = 2328; //!< Min Vco frequency for default on board VCO - MHz portion (xxxx); Fvco min = x,xxx, yyy,yyy unsigned long LTC6947_VCO_Max_Freq_Hz = 0; //!< Max Vco frequency for default on board VCO - Hz portion (yyy,yyy); Fvco max = x,xxx, yyy,yyy unsigned long LTC6947_VCO_Min_Freq_Hz = 0; //!< Min Vco frequency for default on board VCO - Hz portion (yyy,yyy); Fvco min= x,xxx, yyy,yyy unsigned long zero64[]= {0,0}; //!< for 64bit math functions /* ------------------------------------------------------------------------- FUNCTION: LTC6947_read - reads 8 bit Data field to LTC6947. - has to shift data by one bit to account for RW bit -------------------------------------------------------------------------- */ uint8_t LTC6947_read(uint8_t cs, int8_t address) { int8_t address_shift; LT_union_int16_2bytes rx; address_shift =(address << 1) | 0x01; // shift to left to account for R/W bit, set bit high for read spi_transfer_word(cs, address_shift<<8 , &rx.LT_uint16); LTC6947_reg[address]=rx.LT_byte[0]; return(rx.LT_byte[0]); } /* ------------------------------------------------------------------------- FUNCTION: LTC6947_read_field For SPI FIELDS located in 1 or multiple address location - reads specific address locations - identifies and returns specific field in question - can handle SPI fields in multiple addresses, if MSB bit is in the lower number address --------------------------------------------------------------------------- */ long LTC6947_read_field(uint8_t cs, uint8_t address, uint8_t MSB_loc, uint8_t numbits) { int bit_shift, i, num_reg; long field_val, maskbits, pow2; num_reg=0; field_val=0; // determines how many register are used do { bit_shift = (MSB_loc+1)- (numbits-num_reg*8); // determines bit_shift for last register location field_val=LTC6947_read(cs, (address+num_reg))+(field_val<<8); // reads current address locations, shifts previous address location 8 bits num_reg++; } while ((bit_shift<0) && (num_reg<4)); // creates a bit mask for complete word, maskbits = 1; pow2=1; for (i=1, maskbits=1; i>bit_shift) &maskbits; return field_val; } /* ------------------------------------------------------------------------- FUNCTION: get_LTC6947_SPI_FIELD For SPI FIELDS - reads specific address locations - identifies and returns specific field in question - can handle SPI fields in multiple addresses, if MSB bit is in the lower number address --------------------------------------------------------------------------- */ long get_LTC6947_SPI_FIELD(uint8_t cs, uint8_t f) { return LTC6947_read_field(cs, LTC6947_spi_map[f][ADDRx], LTC6947_spi_map[f][DxMSB], LTC6947_spi_map[f][NUMBITS]); } /* ------------------------------------------------------------------------- FUNCTION: LTC6947_write - writes 8 bit Data field to LTC6947. - has to shift data by one bit to account for RW bit --------------------------------------------------------------------------- */ void LTC6947_write(uint8_t cs, uint8_t address, uint8_t Data) { LT_union_int16_2bytes rx; address=address << 1; // shift to left to account for R/W bit spi_transfer_word(cs, (address<<8) | Data, &rx.LT_uint16); } /* ------------------------------------------------------------------------- FUNCTION: LTC6947_write_field For SPI FIELDS - reads specific address location - identifies and returns specific field in question - can handle SPI fields in multiple addresses, if MSB bit is in the lower number address ---------------------------------------------------------------------------- */ uint8_t LTC6947_write_field(uint8_t cs, long field_data, uint8_t address, uint8_t MSB_loc, uint8_t numbits) { long current_content, desired_content, reg_val; int LSB_loc, i, j, num_reg, bit_shift; long temp_arr[32]; for (i=0; i<32 ; i++) temp_arr[i]=0; // init temp_arr // read data in current address location and put in a bit array num_reg=0; current_content=0; do { bit_shift=(MSB_loc+1)-(numbits-num_reg*8); current_content=LTC6947_read(cs, (address+num_reg)) + (current_content<<8); num_reg++; } while ((bit_shift<0) && (num_reg<4)); for (i=0; i<(8*num_reg); i++) { temp_arr[i]=(current_content>>i) & 1; } // exchange current bits with desired bits LSB_loc = 8*(num_reg-1)+MSB_loc-numbits+1; for (i=LSB_loc, j=0; i<=(MSB_loc+(num_reg-1)*8); i++, j++) { temp_arr[i] = (field_data>>j) &1; } // end of for loop // reconstruct bits into an integer desired_content = 0; for (i=0; i<(8*num_reg); i++) { desired_content = desired_content | (temp_arr[i]<> 8*(num_reg-1-i)) & 0xff; LTC6947_write(cs, (address+i), reg_val); } // end of for loop } // end of LTC6947_write_field /* ------------------------------------------------------------------------- FUNCTION: get_LTC6947_REGSIZE - returns # of addresses in parts register map (array size) ---------------------------------------------------------------------------- */ uint8_t get_LTC6947_REGSIZE() { return sizeof(LTC6947_reg); } /* ------------------------------------------------------------------------- FUNCTION: get_LTC6947_SPI_FIELD_NUMBITS - returns the number of bits for a given field name in the SPI map ---------------------------------------------------------------------------- */ uint8_t get_LTC6947_SPI_FIELD_NUMBITS(uint8_t f) { return LTC6947_spi_map[f][NUMBITS]; } /* ------------------------------------------------------------------------- FUNCTION: get_LTC6947_SPI_FIELD_RW - returns if the given field name is (0)read/write or (1)read_only field ---------------------------------------------------------------------------- */ uint8_t get_LTC6947_SPI_FIELD_RW(uint8_t f) { return LTC6947_spi_map[f][R_ONLY]; } /* ------------------------------------------------------------------------- FUNCTION: set_LTC6947_SPI_FIELD For SPI FIELDS - reads specific address location - identifies and returns specific field in question - can handle SPI fields in multiple addresses, if MSB bit is in the lower number address ---------------------------------------------------------------------------- */ void set_LTC6947_SPI_FIELD(uint8_t cs, uint8_t f, long field_data) { LTC6947_write_field(cs, field_data, LTC6947_spi_map[f][ADDRx], LTC6947_spi_map[f][DxMSB], LTC6947_spi_map[f][NUMBITS]); } /* ------------------------------------------------------------------------- FUNCTION: set_LTC6947_ALLREGS - writes data to all registers at once --------------------------------------------------------------------------- */ void set_LTC6947_ALLREGS(uint8_t cs, uint8_t reg01, uint8_t reg02, uint8_t reg03, uint8_t reg04, uint8_t reg05, uint8_t reg06, uint8_t reg07, uint8_t reg08, uint8_t reg09, uint8_t reg0A, uint8_t reg0B, uint8_t reg0C, uint8_t reg0D) { uint8_t i; LTC6947_reg[1] = reg01; LTC6947_reg[2] = reg02; LTC6947_reg[3] = reg03; LTC6947_reg[4] = reg04; LTC6947_reg[5] = reg05; LTC6947_reg[6] = reg06; LTC6947_reg[7] = reg07; LTC6947_reg[8] = reg08; LTC6947_reg[9] = reg09; LTC6947_reg[10] = reg0A; LTC6947_reg[11] = reg0B; LTC6947_reg[12] = reg0C; LTC6947_reg[13] = reg0D; for (i=1; i<14; i++) LTC6947_write(cs, i, LTC6947_reg[i]); } // end of set_LTC6947_ALLREGS /* ------------------------------------------------------------------------- FUNCTION: LTC6947_init - initializes the SPI MAP - for ease of programming there is spreadsheet that automates this some. ----------------------------------------------------------------------------*/ void LTC6947_init() { // spi map LTC6947_spi_map[LTC6947_AUTORST][ADDRx]=0x03; LTC6947_spi_map[LTC6947_AUTORST][DxMSB]= 2; LTC6947_spi_map[LTC6947_AUTORST][NUMBITS]= 1; LTC6947_spi_map[LTC6947_BST][ADDRx]=0x0b; LTC6947_spi_map[LTC6947_BST][DxMSB]= 7; LTC6947_spi_map[LTC6947_BST][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CP][ADDRx]=0x0c; LTC6947_spi_map[LTC6947_CP][DxMSB]= 2; LTC6947_spi_map[LTC6947_CP][NUMBITS]= 3; LTC6947_spi_map[LTC6947_CPCHI][ADDRx]=0x0d; LTC6947_spi_map[LTC6947_CPCHI][DxMSB]= 7; LTC6947_spi_map[LTC6947_CPCHI][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CPCLO][ADDRx]=0x0d; LTC6947_spi_map[LTC6947_CPCLO][DxMSB]= 6; LTC6947_spi_map[LTC6947_CPCLO][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CPDN][ADDRx]=0x0d; LTC6947_spi_map[LTC6947_CPDN][DxMSB]= 0; LTC6947_spi_map[LTC6947_CPDN][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CPINV][ADDRx]=0x0d; LTC6947_spi_map[LTC6947_CPINV][DxMSB]= 4; LTC6947_spi_map[LTC6947_CPINV][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CPLE][ADDRx]=0x04; LTC6947_spi_map[LTC6947_CPLE][DxMSB]= 3; LTC6947_spi_map[LTC6947_CPLE][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CPMID][ADDRx]=0x0d; LTC6947_spi_map[LTC6947_CPMID][DxMSB]= 5; LTC6947_spi_map[LTC6947_CPMID][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CPRST][ADDRx]=0x0d; LTC6947_spi_map[LTC6947_CPRST][DxMSB]= 2; LTC6947_spi_map[LTC6947_CPRST][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CPUP][ADDRx]=0x0d; LTC6947_spi_map[LTC6947_CPUP][DxMSB]= 1; LTC6947_spi_map[LTC6947_CPUP][NUMBITS]= 1; LTC6947_spi_map[LTC6947_CPWIDE][ADDRx]=0x0d; LTC6947_spi_map[LTC6947_CPWIDE][DxMSB]= 3; LTC6947_spi_map[LTC6947_CPWIDE][NUMBITS]= 1; LTC6947_spi_map[LTC6947_DITHEN][ADDRx]=0x03; LTC6947_spi_map[LTC6947_DITHEN][DxMSB]= 1; LTC6947_spi_map[LTC6947_DITHEN][NUMBITS]= 1; LTC6947_spi_map[LTC6947_FILT][ADDRx]=0x0b; LTC6947_spi_map[LTC6947_FILT][DxMSB]= 6; LTC6947_spi_map[LTC6947_FILT][NUMBITS]= 2; LTC6947_spi_map[LTC6947_INTN][ADDRx]=0x03; LTC6947_spi_map[LTC6947_INTN][DxMSB]= 0; LTC6947_spi_map[LTC6947_INTN][NUMBITS]= 1; LTC6947_spi_map[LTC6947_LDOEN][ADDRx]=0x04; LTC6947_spi_map[LTC6947_LDOEN][DxMSB]= 2; LTC6947_spi_map[LTC6947_LDOEN][NUMBITS]= 1; LTC6947_spi_map[LTC6947_LDOV][ADDRx]=0x04; LTC6947_spi_map[LTC6947_LDOV][DxMSB]= 1; LTC6947_spi_map[LTC6947_LDOV][NUMBITS]= 2; LTC6947_spi_map[LTC6947_LKCT][ADDRx]=0x0c; LTC6947_spi_map[LTC6947_LKCT][DxMSB]= 4; LTC6947_spi_map[LTC6947_LKCT][NUMBITS]= 2; LTC6947_spi_map[LTC6947_LKWIN][ADDRx]=0x0c; LTC6947_spi_map[LTC6947_LKWIN][DxMSB]= 7; LTC6947_spi_map[LTC6947_LKWIN][NUMBITS]= 3; LTC6947_spi_map[LTC6947_LOCK][ADDRx]=0x00; LTC6947_spi_map[LTC6947_LOCK][DxMSB]= 2; LTC6947_spi_map[LTC6947_LOCK][NUMBITS]= 1; LTC6947_spi_map[LTC6947_ND][ADDRx]=0x06; LTC6947_spi_map[LTC6947_ND][DxMSB]= 1; LTC6947_spi_map[LTC6947_ND][NUMBITS]= 10; LTC6947_spi_map[LTC6947_NUM][ADDRx]=0x08; LTC6947_spi_map[LTC6947_NUM][DxMSB]= 5; LTC6947_spi_map[LTC6947_NUM][NUMBITS]= 18; LTC6947_spi_map[LTC6947_OD][ADDRx]=0x0b; LTC6947_spi_map[LTC6947_OD][DxMSB]= 2; LTC6947_spi_map[LTC6947_OD][NUMBITS]= 3; LTC6947_spi_map[LTC6947_OMUTE][ADDRx]=0x02; LTC6947_spi_map[LTC6947_OMUTE][DxMSB]= 1; LTC6947_spi_map[LTC6947_OMUTE][NUMBITS]= 1; LTC6947_spi_map[LTC6947_PART][ADDRx]=0x0e; LTC6947_spi_map[LTC6947_PART][DxMSB]= 3; LTC6947_spi_map[LTC6947_PART][NUMBITS]= 4; LTC6947_spi_map[LTC6947_PDALL][ADDRx]=0x02; LTC6947_spi_map[LTC6947_PDALL][DxMSB]= 7; LTC6947_spi_map[LTC6947_PDALL][NUMBITS]= 1; LTC6947_spi_map[LTC6947_PDFN][ADDRx]=0x02; LTC6947_spi_map[LTC6947_PDFN][DxMSB]= 3; LTC6947_spi_map[LTC6947_PDFN][NUMBITS]= 1; LTC6947_spi_map[LTC6947_PDOUT][ADDRx]=0x02; LTC6947_spi_map[LTC6947_PDOUT][DxMSB]= 4; LTC6947_spi_map[LTC6947_PDOUT][NUMBITS]= 1; LTC6947_spi_map[LTC6947_PDPLL][ADDRx]=0x02; LTC6947_spi_map[LTC6947_PDPLL][DxMSB]= 6; LTC6947_spi_map[LTC6947_PDPLL][NUMBITS]= 1; LTC6947_spi_map[LTC6947_POR][ADDRx]=0x02; LTC6947_spi_map[LTC6947_POR][DxMSB]= 0; LTC6947_spi_map[LTC6947_POR][NUMBITS]= 1; LTC6947_spi_map[LTC6947_RD][ADDRx]=0x06; LTC6947_spi_map[LTC6947_RD][DxMSB]= 7; LTC6947_spi_map[LTC6947_RD][NUMBITS]= 5; LTC6947_spi_map[LTC6947_REV][ADDRx]=0x0e; LTC6947_spi_map[LTC6947_REV][DxMSB]= 7; LTC6947_spi_map[LTC6947_REV][NUMBITS]= 4; LTC6947_spi_map[LTC6947_RFO][ADDRx]=0x0b; LTC6947_spi_map[LTC6947_RFO][DxMSB]= 4; LTC6947_spi_map[LTC6947_RFO][NUMBITS]= 2; LTC6947_spi_map[LTC6947_RSTFN][ADDRx]=0x0a; LTC6947_spi_map[LTC6947_RSTFN][DxMSB]= 1; LTC6947_spi_map[LTC6947_RSTFN][NUMBITS]= 1; LTC6947_spi_map[LTC6947_SEED][ADDRx]=0x05; LTC6947_spi_map[LTC6947_SEED][DxMSB]= 7; LTC6947_spi_map[LTC6947_SEED][NUMBITS]= 8; LTC6947_spi_map[LTC6947_THI][ADDRx]=0x00; LTC6947_spi_map[LTC6947_THI][DxMSB]= 1; LTC6947_spi_map[LTC6947_THI][NUMBITS]= 1; LTC6947_spi_map[LTC6947_TLO][ADDRx]=0x00; LTC6947_spi_map[LTC6947_TLO][DxMSB]= 0; LTC6947_spi_map[LTC6947_TLO][NUMBITS]= 1; LTC6947_spi_map[LTC6947_UNLOK][ADDRx]=0x00; LTC6947_spi_map[LTC6947_UNLOK][DxMSB]= 5; LTC6947_spi_map[LTC6947_UNLOK][NUMBITS]= 1; LTC6947_spi_map[LTC6947_x][ADDRx]=0x01; LTC6947_spi_map[LTC6947_x][DxMSB]= 5; LTC6947_spi_map[LTC6947_x][NUMBITS]= 6; LTC6947_spi_map[LTC6947_AUTORST][R_ONLY]= 0; LTC6947_spi_map[LTC6947_BST][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CP][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPCHI][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPCLO][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPDN][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPINV][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPLE][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPMID][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPRST][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPUP][R_ONLY]= 0; LTC6947_spi_map[LTC6947_CPWIDE][R_ONLY]= 0; LTC6947_spi_map[LTC6947_DITHEN][R_ONLY]= 0; LTC6947_spi_map[LTC6947_FILT][R_ONLY]= 0; LTC6947_spi_map[LTC6947_INTN][R_ONLY]= 0; LTC6947_spi_map[LTC6947_LDOEN][R_ONLY]= 0; LTC6947_spi_map[LTC6947_LDOV][R_ONLY]= 0; LTC6947_spi_map[LTC6947_LKCT][R_ONLY]= 0; LTC6947_spi_map[LTC6947_LKWIN][R_ONLY]= 0; LTC6947_spi_map[LTC6947_LOCK][R_ONLY]= 1; LTC6947_spi_map[LTC6947_ND][R_ONLY]= 0; LTC6947_spi_map[LTC6947_NUM][R_ONLY]= 0; LTC6947_spi_map[LTC6947_OD][R_ONLY]= 0; LTC6947_spi_map[LTC6947_OMUTE][R_ONLY]= 0; LTC6947_spi_map[LTC6947_PART][R_ONLY]= 1; LTC6947_spi_map[LTC6947_PDALL][R_ONLY]= 0; LTC6947_spi_map[LTC6947_PDFN][R_ONLY]= 0; LTC6947_spi_map[LTC6947_PDOUT][R_ONLY]= 0; LTC6947_spi_map[LTC6947_PDPLL][R_ONLY]= 0; LTC6947_spi_map[LTC6947_POR][R_ONLY]= 0; LTC6947_spi_map[LTC6947_RD][R_ONLY]= 0; LTC6947_spi_map[LTC6947_REV][R_ONLY]= 1; LTC6947_spi_map[LTC6947_RFO][R_ONLY]= 0; LTC6947_spi_map[LTC6947_RSTFN][R_ONLY]= 0; LTC6947_spi_map[LTC6947_SEED][R_ONLY]= 0; LTC6947_spi_map[LTC6947_THI][R_ONLY]= 1; LTC6947_spi_map[LTC6947_TLO][R_ONLY]= 1; LTC6947_spi_map[LTC6947_UNLOK][R_ONLY]= 1; LTC6947_spi_map[LTC6947_x][R_ONLY]= 0; } // end of LTC6947_init void set_LTC6947_global_fref(unsigned long fref_MHz, unsigned long fref_Hz) { LTC6947_Fref_MHz=fref_MHz; LTC6947_Fref_Hz=fref_Hz; } void set_LTC6947_global_frf(unsigned long frf_MHz, unsigned long frf_Hz) { LTC6947_Frf_MHz=frf_MHz; LTC6947_Frf_Hz=frf_Hz; } void set_LTC6947_global_vcolim(unsigned long fvco_max_MHz, unsigned long fvco_max_Hz, unsigned long fvco_min_MHz, unsigned long fvco_min_Hz) { LTC6947_VCO_Max_Freq_MHz=fvco_max_MHz; LTC6947_VCO_Max_Freq_Hz=fvco_max_Hz; LTC6947_VCO_Min_Freq_MHz=fvco_min_MHz; LTC6947_VCO_Min_Freq_Hz=fvco_min_Hz; } unsigned long get_LTC6947_global_fref_MHz() { return LTC6947_Fref_MHz; } unsigned long get_LTC6947_global_fref_Hz() { return LTC6947_Fref_Hz; } unsigned long get_LTC6947_global_frf_MHz() { return LTC6947_Frf_MHz; } unsigned long get_LTC6947_global_frf_Hz() { return LTC6947_Frf_Hz; } unsigned long get_LTC6947_global_VCO_MAX_MHz() { return LTC6947_VCO_Max_Freq_MHz; } unsigned long get_LTC6947_global_VCO_MIN_MHz() { return LTC6947_VCO_Min_Freq_MHz; } unsigned long get_LTC6947_global_VCO_MAX_Hz() { return LTC6947_VCO_Max_Freq_Hz; } unsigned long get_LTC6947_global_VCO_MIN_Hz() { return LTC6947_VCO_Min_Freq_Hz; } /* ------------------------------------------------------------------------- FUNCTION: calc_odiv - calculates the output divider setting based on the frf and on board VCO frequencies of LTC6947 - @return odiv = 1-6 for valid setting, 999 as invalid frequency ---------------------------------------------------------------------------- */ unsigned long LTC6947_calc_odiv(unsigned long frf[2]) { unsigned long odiv, i; unsigned long max_fout64[2]; unsigned long min_fout64[2]; unsigned long temp_fout[2]; unsigned long temp_i[2]; boolean valid_input=false; HZto64(max_fout64,LTC6947_VCO_Max_Freq_MHz,LTC6947_VCO_Max_Freq_Hz); HZto64(min_fout64,LTC6947_VCO_Min_Freq_MHz,LTC6947_VCO_Min_Freq_Hz); // verify desired frequency falls within a divider range (1-6) valid_input=false; for (i=1; i<=6; i++) { init64(temp_i,0L,i); temp_fout[0] = frf[0]; temp_fout[1] = frf[1]; mul64(temp_fout,temp_i); if (lt64(temp_fout,max_fout64) || eq64(temp_fout, max_fout64)) // same as frf*i <= max_fout { if (lt64(min_fout64,temp_fout) || eq64(temp_fout, min_fout64)) // same as frf*i >= min_fout { valid_input=true; odiv=i; } } } // end of for loop if (valid_input == false) odiv= 999L; return odiv; } // end of LTC6947_calc_odiv /* ------------------------------------------------------------------------- FUNCTION: LTC6947_set_frf Calculates the integer (N), fractional (NUM) and output divider (OD) SPI values using self created 64bit math functions. Datasheet equations fvco = fpfd*(N + F) frf = fvco/O fpfd = fref/R F=NUM/2^18 = NUM/262144 can be modified to the following equations N = (int) (fvco/fpfd) = (int) frf*O*R/fref NUM = (int) [262144 * (frf*O*R/fref -N)] where N = ndiv, O= odiv, NUM=fracN_num in the code below Linduino One (Arduino Uno) is limited to 32 bit floats/double/long. 32 bit math functions will create rounding errors with the above equations, tha can result in frequency errors. Therefore, the following code uses self created 64bit functions for 64bit integer math. frf (33 bits) LTC6947-4 max frf/fvco = 6.4GHZ, which is 23 bit number (2^33 = 8.59G) fref (23 bits) LTC6947 min fref = 10MHz, which is a 23 bit number (2^23 = 8.3M) O (3 bits) R (5 bits) step 1: create 64 bit frf and fref numbers step 2: calculate O (output divider) step 3: get current R-divider setting step 4: calculate frf*O*R max bit count/resolution: 33b+3b+5b= 41b step 5: calculate N(10b), using value from step 1 N = (int) frf*O*R/fref max bit count/resolution: 41b-23b = 18b step 6: calculate NUM (18b) NUM = (int) [262144 * (frf*O*R/fref -N)] = (int) [2^18 * (frf*O*R/fref -N)] to get the correct value the above calculation are performed like this = ((int)((frf*O*R/fref)<<23) - N<<23 + rounding) >> 5, where << & >> are bit shift left, right * note << 23b was chosen, because step one use 41b, 41b +23b = 64b (max number for 64 bit math) ** note >> 5 was chosen because 23-5 = 2^18, which is the same as multiplying by 262144 *** the rounding variable is equivalent to adding 0.5 to the NUM number. the integer operation always rounds down, so adding a 0.5 to the number before rounding down ensures the closest value is selected. In this function the lower 5 bits of (frf*O*R/fref)<<23) - N<<23 (possible variable 0-31) are check to see if they are >=16. If they are then 16 is added to this number before performing the int and >>5 functions. ---------------------------------------------------------------------------- */ void LTC6947_set_frf() { unsigned long frf_MHz, frf_Hz, fref_MHz, fref_Hz, odiv, rdiv, ndiv, fracN_num, frac_num_remainder; unsigned long N64[2], NUM64[2], R64[2], O64[2], temp_long[2]; char buffer[100]; unsigned long frf[2], frf_act[2]; unsigned long fref[2]; unsigned long temp_math[2]; unsigned long frf_rdiv_odiv[2]; unsigned long frf_rdiv_odiv_int[2]; unsigned long roundup[2]; /* step 1: create 64 bit frf and fref numbers 32 bit xxxx MHz number and 32 bit yyy yyy Hz number. */ frf_MHz=LTC6947_Frf_MHz; frf_Hz=LTC6947_Frf_Hz; HZto64(frf, frf_MHz, frf_Hz); fref_MHz=LTC6947_Fref_MHz; fref_Hz=LTC6947_Fref_Hz; HZto64(fref,fref_MHz,fref_Hz); // step 2: calculate O (output divider) odiv=LTC6947_calc_odiv(frf); // step 3: get current R-divider setting rdiv=get_LTC6947_SPI_FIELD(LTC6947_CS,LTC6947_RD); // reads selected field // step 3: calculate frf*O*R frf_rdiv_odiv[0]=0; frf_rdiv_odiv[1]=odiv*rdiv; mul64(frf_rdiv_odiv, frf); // odiv*rdiv*frf frf_rdiv_odiv_int[0]=frf_rdiv_odiv[0]; // copy odiv*rdiv*frf to another variable frf_rdiv_odiv_int[1]=frf_rdiv_odiv[1]; // step 4: calculate N(10b), using value from step 3; N = (int) frf*O*R/fref temp_math[0]=fref[0]; // copy fref to temp variable for math operation temp_math[1]=fref[1]; div64(frf_rdiv_odiv_int, temp_math); // frf_rdiv_odiv_int= [(frf*odiv*rdiv)]/fref --> int(fvco/fpfd) ndiv=frf_rdiv_odiv_int[1]; // step 5: calculate NUM (18b), NUM = (int) [262144 * (frf*O*R/fref -N)] // SEE notes in function header for step 5 // ((int)((frf*O*R/fref)<<23) - N<<23 + rounding) >> 5, where << & >> are bit shift left, right shl64by(frf_rdiv_odiv,23); div64(frf_rdiv_odiv, fref); // frf_rdiv_odiv --> [(frf*odiv*rdiv)<<23]/fref shl64by(frf_rdiv_odiv_int,23); // frf_rdiv_odiv_int --> [(int)((frf*odiv*rdiv)/fref)] <<23 sub64(frf_rdiv_odiv,frf_rdiv_odiv_int); // NUM is a 18 bit number in the spi register // At this point in the program it is represented by 23 bits // if the lower 5 bits are >=16 (16/31), // then add 16 to the frac_num_remainder. After the bits are // shifted down 5 bits this will be close to added 0.5 bits. frac_num_remainder=(frf_rdiv_odiv[1] & 31L); if (frac_num_remainder >= 16L) { roundup[0]=0L; roundup[1]=16L; add64(frf_rdiv_odiv,roundup); } // shift NUM to get desired 18 bit number for SPI map. shr64by(frf_rdiv_odiv,5); fracN_num=frf_rdiv_odiv[1]; // program part and print out results to screen set_LTC6947_SPI_FIELD(LTC6947_CS,LTC6947_OD,odiv); // programs output divider Serial.print("OD = "); Serial.println(odiv); Serial.print("RD = "); Serial.println(rdiv); set_LTC6947_SPI_FIELD(LTC6947_CS,LTC6947_ND,ndiv); // programs N-divider Serial.print(F("ND = ")); Serial.println(ndiv); if (fracN_num > 0L) { set_LTC6947_SPI_FIELD(LTC6947_CS,LTC6947_INTN,0L); // programs fractional mode set_LTC6947_SPI_FIELD(LTC6947_CS,LTC6947_NUM,fracN_num); // programs NUM if ( (ndiv<35) || (ndiv>1019) ) Serial.print(F("N DIV set to invalid setting - REFER TO DATASHEET\n")); } else { set_LTC6947_SPI_FIELD(LTC6947_CS,LTC6947_INTN,1L); // programs INTN Serial.print(F("When NUM=0, changes to Integer Mode (NUM can not be 0)\n")); if ( (ndiv<32) || (ndiv>1023) ) Serial.print(F("N DIV set to invalid setting - REFER TO DATASHEET\n")); } Serial.print(F("NUM = ")); Serial.println(fracN_num); ///// calculate actual fout here and print out frf_act[0]=fref[0]; frf_act[1]=fref[1]; N64[0]=0; NUM64[0]=0; R64[0]=0; O64[0]=0; N64[1]=ndiv; NUM64[1]=fracN_num; R64[1]=rdiv; O64[1]=odiv; shl64by(N64,18); add64(N64,NUM64); // (N*262144 +NUM) div64(frf_act,R64); // fref/rdiv (or fpfd) mul64(frf_act,N64); // (N*262144 +NUM)*fpdf div64(frf_act,O64); // ((N*262144 +NUM)*fpdf)/odiv shr64by(frf_act,17); if (frf_act[0]==0) // no 32 bit overflow case { Serial.print(F("Actual Output Frequency (closest available) is ")); Serial.print(frf_act[1]); Serial.println("Hz"); } else // overflow case { temp_math[0]=frf_act[0]; temp_math[1]=frf_act[1]; temp_long[0]=0; temp_long[1]=OneMHz; div64(temp_math,temp_long); // frf/1e6 Serial.print(F("Actual Output Frequency (closest available) is ")); Serial.print(temp_math[1]); Serial.print("MHz + "); temp_long[0]=0; temp_long[1]=OneMHz; mul64(temp_math,temp_long); // int(frf/1e6)*1e6 sub64(frf_act,temp_math); // frf-int(frf/1e6)*1e6 Serial.print(frf_act[1]); Serial.println("Hz"); } } /* ------------------------------------------------------------------------- FUNCTION: prt Prints HEX representation of 64 bit an ---------------------------------------------------------------------------- */ void prt(unsigned long an[]) { Serial.print(an[0],HEX); Serial.print(" "); Serial.println(an[1],HEX); } /* ------------------------------------------------------------------------- FUNCTION: init64 Creates a equivalent 64 bit number from 2 32 bit numbers an[0]=bigPart //upper 32 bits an[1]=littlePart //lower 32 bits ---------------------------------------------------------------------------- */ void init64(unsigned long an[], unsigned long bigPart, unsigned long littlePart ) { an[0]=bigPart; an[1]=littlePart; } /* ------------------------------------------------------------------------- FUNCTION: HZto64 create a 64 bit Hz number from 32 bit xxxx MHz number and 32 bit yyy yyy Hz number. A) if an < 2^32 bits an(upper 32b) = 0 an(lower 32b) = MHzPart(32b)*1MHz + HzPart (32b) B) if an > 2^32 bits (4,294,967,296) an(upper 32b) = 1 an(lower 32b) = ((MHzPart-4294)*1MHz+HzPart)-967296 ---------------------------------------------------------------------------- */ void HZto64(unsigned long an[], unsigned long MHzPart, unsigned long HzPart ) { if ((MHzPart>4295) || ((MHzPart==4294) && (HzPart>=967296))) { an[0]=1L; // upper 32 bits an[1] =(MHzPart-4294L)*OneMHz + HzPart-967296L; // lower 32 bits } else { an[0] = 0; // upper 32 bits an[1] = MHzPart*OneMHz+HzPart; // lower 32 bits } } /* ------------------------------------------------------------------------- FUNCTION: shl64 Single Bit shift left of equivalent 64 bit number (an[] = an[]<<1) ---------------------------------------------------------------------------- */ void shl64(unsigned long an[]) { an[0] <<= 1; if (an[1] & 0x80000000) an[0]++; an[1] <<= 1; } /* ------------------------------------------------------------------------- FUNCTION: shr64 Single Bit shift right of equivalent 64 bit number (an[] = an[]>>1) ---------------------------------------------------------------------------- */ void shr64(unsigned long an[]) { an[1] >>= 1; if (an[0] & 0x1) an[1]+=0x80000000; an[0] >>= 1; } /* ------------------------------------------------------------------------- FUNCTION: shl64by Multi Bit shift left of equivalent 64 bit number (an[] = an[]<>shiftnum) ---------------------------------------------------------------------------- */ void shr64by(unsigned long an[], uint8_t shiftnum) { uint8_t i; for (i=0; i>= 1; if (an[0] & 0x1) an[1]+=0x80000000; an[0] >>= 1; } } /* ------------------------------------------------------------------------- FUNCTION: add64 64 bit Add ann to an (an[] = an[] + ann[]) ---------------------------------------------------------------------------- */ void add64(unsigned long an[], unsigned long ann[]) { an[0]+=ann[0]; if (an[1] + ann[1] < ann[1]) an[0]++; an[1]+=ann[1]; } /* ------------------------------------------------------------------------- FUNCTION: sub64 64 bit Subtract ann from an (an[] = an[] - ann[]) ---------------------------------------------------------------------------- */ void sub64(unsigned long an[], unsigned long ann[]) { an[0]-=ann[0]; if (an[1] < ann[1]) { an[0]--; } an[1]-= ann[1]; } /* ------------------------------------------------------------------------- FUNCTION: eq64 64 bit, if an == ann, then true ---------------------------------------------------------------------------- */ boolean eq64(unsigned long an[], unsigned long ann[]) { return (an[0]==ann[0]) && (an[1]==ann[1]); } /* ------------------------------------------------------------------------- FUNCTION: lt64 64 bit, if an < ann, then true ---------------------------------------------------------------------------- */ boolean lt64(unsigned long an[], unsigned long ann[]) { if (an[0]>ann[0]) return false; return (an[0]