/*!
LTC SMBus Support: API for a LTC2978 Fault Log

@verbatim

This API is shared with Linduino and RTOS code. End users should code to this
API to enable use of the PMBus code without modifications.

@endverbatim


Copyright 2018(c) Analog Devices, Inc.

All rights reserved.

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
 - Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.
 - Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in
   the documentation and/or other materials provided with the
   distribution.
 - Neither the name of Analog Devices, Inc. nor the names of its
   contributors may be used to endorse or promote products derived
   from this software without specific prior written permission.
 - The use of this software may or may not infringe the patent rights
   of one or more patent holders.  This license does not release you
   from the requirement that you obtain separate licenses from these
   patent holders to use this software.
 - Use of the software either in source or binary form, must be run
   on or directly connected to an Analog Devices Inc. component.

THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/

//! @ingroup PMBus_SMBus
//! @{
//! @defgroup LT_2978FaultLog LT_2978FaultLog
//! @}

/*! @file
    @ingroup LT_2978FaultLog
    Library Header File for LT_2978FaultLog
*/

#include <Arduino.h>
#include "LT_2978FaultLog.h"


LT_2978FaultLog::LT_2978FaultLog(LT_PMBus *pmbus):LT_EEDataFaultLog(pmbus)
{
  faultLog2978 = NULL;

  buffer = NULL;
  voutPeaks = NULL;
  voutDatas = NULL;
}


bool LT_2978FaultLog::FaultLogLtc2978::isValidData(void *pos, uint8_t size)
{
  return (uint8_t *)pos >= (uint8_t *)this + firstValidByte && (uint8_t *)pos + (size - 1) <= (uint8_t *)this + lastValidByte;
}

/*
 * Read LTC2978 fault log
 *
 * address: PMBUS address
 */
void
LT_2978FaultLog::read(uint8_t address)
{
  uint16_t size = sizeof(struct LT_2978FaultLog::FaultLogLtc2978);
  uint8_t *data = (uint8_t *) malloc(size);
  if (data == 0)
    Serial.print(F("bad malloc."));
  data[0] = 0x00;


  // Copy to RAM
  pmbus_->smbus()->sendByte(address, MFR_FAULT_LOG_RESTORE);
  // MFR_FAULT_LOG_RESTORE requires a delay (see datasheet), typical delay is 2ms, multiplying by 10 for safety
  delay(20);
  // Read block data with log
  pmbus_->smbus()->readBlock(address, MFR_FAULT_LOG, data, 255);

  struct LT_2978FaultLog::FaultLogLtc2978 *log = (struct LT_2978FaultLog::FaultLogLtc2978 *)data;

  log->firstValidByte = 47;

  log->lastValidByte = 237;

  uint8_t cycle_start = log->preamble.position_last;

  log->loops = (LT_2978FaultLog::FaultLogReadLoopLtc2978 *) (log->telemetryData - 39 + cycle_start);

  faultLog2978 = log;
}


void LT_2978FaultLog::release()
{
  free(faultLog2978);
  faultLog2978 = 0;
}

uint8_t *LT_2978FaultLog::getBinary()
{
  return (uint8_t *)faultLog2978;
}

uint16_t LT_2978FaultLog::getBinarySize()
{
  return 255;
}

void LT_2978FaultLog::dumpBinary(Print *printer)
{
  dumpBin(printer, (uint8_t *)faultLog2978, 255);
}

void LT_2978FaultLog::print(Print *printer)
{
  if (printer == 0)
    printer = &Serial;
  buffer = new char[FILE_TEXT_LINE_MAX];

  printTitle(printer);

  printTime(printer);

  printPeaks(printer);

  printAllLoops(printer);


  delete [] buffer;
}


void LT_2978FaultLog::printTitle(Print *printer)
{
  printer->print(F("LTC2978 Log Data\n"));
}

void LT_2978FaultLog::printTime(Print *printer)
{
  uint8_t *time = (uint8_t *)&faultLog2978->preamble.shared_time;
  snprintf_P(buffer, FILE_TEXT_LINE_MAX, PSTR("Fault Time 0x%02x%02x%02x%02x%02x%02x\n"), time[5], time[4], time[3], time[2], time[1], time[0]);
  printer->print(buffer);
  printer->print((long) getSharedTime200us(faultLog2978->preamble.shared_time));
  printer->println(F(" Ticks (200us each)"));
}

void LT_2978FaultLog::printPeaks(Print *printer)
{
  voutPeaks = new Peak16Words*[8];

  voutPeaks[0] = &faultLog2978->preamble.peaks.vout0_peaks;
  voutPeaks[1] = &faultLog2978->preamble.peaks.vout1_peaks;
  voutPeaks[2] = &faultLog2978->preamble.peaks.vout2_peaks;
  voutPeaks[3] = &faultLog2978->preamble.peaks.vout3_peaks;
  voutPeaks[4] = &faultLog2978->preamble.peaks.vout4_peaks;
  voutPeaks[5] = &faultLog2978->preamble.peaks.vout5_peaks;
  voutPeaks[6] = &faultLog2978->preamble.peaks.vout6_peaks;
  voutPeaks[7] = &faultLog2978->preamble.peaks.vout7_peaks;


  printer->println(F("\nPeak Values:"));
  printer->println(F("--------"));

  printFastChannel(0, printer);
  printFastChannel(1, printer);

  float vin_max, vin_min;
  vin_max = math_.lin11_to_float(getLin5_11WordVal(faultLog2978->preamble.peaks.vin_peaks.peak));
  vin_min = math_.lin11_to_float(getLin5_11WordVal(faultLog2978->preamble.peaks.vin_peaks.min));
  printer->print(F("Vin: Min: "));
  printer->print(vin_min, 6);
  printer->print(F(", Peak: "));
  printer->print(vin_max, 6);
  printer->println();

  printFastChannel(2, printer);
  printFastChannel(3, printer);

  float temp_max, temp_min;
  temp_max = math_.lin11_to_float(getLin5_11WordVal(faultLog2978->preamble.peaks.temp_peaks.peak));
  temp_min = math_.lin11_to_float(getLin5_11WordVal(faultLog2978->preamble.peaks.temp_peaks.min));
  printer->print(F("Temp: Min: "));
  printer->print(temp_min, 6);
  printer->print(F(", Peak: "));
  printer->print(temp_max, 6);
  printer->println();

  printFastChannel(4, printer);
  printFastChannel(5, printer);
  printFastChannel(6, printer);
  printFastChannel(7, printer);

  delete [] voutPeaks;
}

void LT_2978FaultLog::printFastChannel(uint8_t index, Print *printer)
{
  float vout_peak, vout_min;
  vout_peak = math_.lin16_to_float(getLin16WordVal(voutPeaks[index]->peak), 0x13);
  vout_min = math_.lin16_to_float(getLin16WordVal(voutPeaks[index]->min), 0x13);
  printer->print(F("Vout"));
  printer->print(index);
  printer->print(F(": Min: "));
  printer->print(vout_min, 6);
  printer->print(F(", Peak: "));
  printer->println(vout_peak, 6);
}

void LT_2978FaultLog::printAllLoops(Print *printer)
{
  voutDatas = new VoutData*[8];

  printer->println(F("Fault Log Loops Follow:"));
  printer->println(F("(most recent data first)"));

  for (int index = 0; index <= 5 && (index < 5 || faultLog2978->isValidData(&faultLog2978->loops[index])); index++)
  {
    printLoop(index, printer);
  }

  delete [] voutDatas;
}

void LT_2978FaultLog::printLoop(uint8_t index, Print *printer)
{
  printer->println(F("-------"));
  printer->print(F("Loop: "));
  printer->println(index);
  printer->println(F("-------"));

  voutDatas[0] = &faultLog2978->loops[index].vout_data0;
  voutDatas[1] = &faultLog2978->loops[index].vout_data1;
  voutDatas[2] = &faultLog2978->loops[index].vout_data2;
  voutDatas[3] = &faultLog2978->loops[index].vout_data3;
  voutDatas[4] = &faultLog2978->loops[index].vout_data4;
  voutDatas[5] = &faultLog2978->loops[index].vout_data5;
  voutDatas[6] = &faultLog2978->loops[index].vout_data6;
  voutDatas[7] = &faultLog2978->loops[index].vout_data7;

  uint8_t stat;
  float val;

  printLoopChannel(7, printer);
  printLoopChannel(6, printer);
  printLoopChannel(5, printer);
  printLoopChannel(4, printer);

  if (faultLog2978->isValidData(&faultLog2978->loops[index].temp_data.status_temp, 1))
  {
    printer->println(F("TEMPERATURE:"));
    stat = getRawByteVal(faultLog2978->loops[index].temp_data.status_temp);
    snprintf_P(buffer, FILE_TEXT_LINE_MAX, PSTR("  STATUS_TEMP: 0x%02x\n"), stat);
    printer->print(buffer);
  }
  if (faultLog2978->isValidData(&faultLog2978->loops[index].temp_data.read_temp1))
  {
    val = math_.lin11_to_float(getLin5_11WordReverseVal(faultLog2978->loops[index].temp_data.read_temp1));
    printer->print(F("  READ_TEMP: "));
    printer->print(val, 6);
    printer->println(F(" C"));
  }

  printLoopChannel(3, printer);
  printLoopChannel(2, printer);

  if (faultLog2978->isValidData(&faultLog2978->loops[index].vin_data.status_vin, 1))
  {
    printer->println(F("VIN:"));
    stat = getRawByteVal(faultLog2978->loops[index].vin_data.status_vin);
    snprintf_P(buffer, FILE_TEXT_LINE_MAX, PSTR("  STATUS_INPUT: 0x%02x\n"), stat);
    printer->print(buffer);
  }
  if (faultLog2978->isValidData(&faultLog2978->loops[index].vin_data.vin))
  {
    val = math_.lin11_to_float(getLin5_11WordReverseVal(faultLog2978->loops[index].vin_data.vin));
    printer->print(F("  READ_VIN: "));
    printer->print(val, 6);
    printer->println(F(" V"));
  }

  printLoopChannel(1, printer);
  printLoopChannel(0, printer);
  printer->println();

}

void LT_2978FaultLog::printLoopChannel(uint8_t index, Print *printer)
{
  uint8_t stat;
  float val;

  if (faultLog2978->isValidData(&voutDatas[index]->status_mfr, 1))
  {
    printer->print(F("CHAN"));
    printer->print(index);
    printer->println(F(":"));
    stat = getRawByteVal(voutDatas[index]->status_mfr);
    snprintf_P(buffer, FILE_TEXT_LINE_MAX, PSTR("  STATUS_MFR: 0x%02x\n"), stat);
    printer->print(buffer);
  }
  if (faultLog2978->isValidData(&voutDatas[index]->status_vout, 1))
  {
    stat = getRawByteVal(voutDatas[index]->status_vout);
    snprintf_P(buffer, FILE_TEXT_LINE_MAX, PSTR("  STATUS_VOUT: 0x%02x\n"), stat);
    printer->print(buffer);
  }
  if (faultLog2978->isValidData(&voutDatas[index]->read_vout))
  {
    val = math_.lin16_to_float(getLin16WordReverseVal(voutDatas[index]->read_vout), 0x13);
    printer->print(F("  READ_VOUT: "));
    printer->print(val, 6);
    printer->println(F(" V"));
  }
}