/** ****************************************************************************** * @file stm3220f_eval.h * @author MCD Application Team * @version V4.X.0RC10 * @date 10/15/2010 * @brief This file contains definitions for STM3220F_EVAL's Leds, push-buttons * and COM ports hardware resources. ****************************************************************************** * @copy * * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. * *

© COPYRIGHT 2010 STMicroelectronics

*/ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __IAR_STM32F217ZE_SK_H #define __IAR_STM32F217ZE_SK_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f2xx_conf.h" typedef enum { LED1 = 0, LED2 = 1, LED3 = 2, LED4 = 3 } Led_TypeDef; typedef enum { BUTTON_WAKEUP = 0, BUTTON_TAMPER = 1, BUTTON_RIGHT = 2, BUTTON_LEFT = 3, BUTTON_UP = 4, BUTTON_DOWN = 5, BUTTON_SEL = 6 } Button_TypeDef; typedef enum { BUTTON_MODE_GPIO = 0, BUTTON_MODE_EXTI = 1 } ButtonMode_TypeDef; typedef enum { COM1 = 0, COM2 = 1 } COM_TypeDef; #define LEDn 4 #define LED1_PIN GPIO_Pin_6 #define LED1_GPIO_PORT GPIOF #define LED1_GPIO_CLK RCC_AHB1Periph_GPIOF #define LED2_PIN GPIO_Pin_7 #define LED2_GPIO_PORT GPIOF #define LED2_GPIO_CLK RCC_AHB1Periph_GPIOF #define LED3_PIN GPIO_Pin_8 #define LED3_GPIO_PORT GPIOF #define LED3_GPIO_CLK RCC_AHB1Periph_GPIOF #define LED4_PIN GPIO_Pin_9 #define LED4_GPIO_PORT GPIOF #define LED4_GPIO_CLK RCC_AHB1Periph_GPIOF /** * @} */ /** @addtogroup STM3220F_EVAL_LOW_LEVEL_BUTTON * @{ */ #define BUTTONn 8 /**/ /** * @brief Wakeup push-button */ #define WAKEUP_BUTTON_PIN GPIO_Pin_0 #define WAKEUP_BUTTON_GPIO_PORT GPIOA #define WAKEUP_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOA #define WAKEUP_BUTTON_EXTI_LINE EXTI_Line0 #define WAKEUP_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOA #define WAKEUP_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource0 #define WAKEUP_BUTTON_EXTI_IRQn EXTI0_IRQn /** * @brief Tamper push-button */ #define TAMPER_BUTTON_PIN GPIO_Pin_13 #define TAMPER_BUTTON_GPIO_PORT GPIOC #define TAMPER_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOC #define TAMPER_BUTTON_EXTI_LINE EXTI_Line13 #define TAMPER_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOC #define TAMPER_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource13 #define TAMPER_BUTTON_EXTI_IRQn EXTI15_10_IRQn /** * @brief Joystick Right */ #define RIGHT_BUTTON_PIN GPIO_Pin_6 #define RIGHT_BUTTON_GPIO_PORT GPIOG #define RIGHT_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOG #define RIGHT_BUTTON_EXTI_LINE EXTI_Line6 #define RIGHT_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOG #define RIGHT_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource6 #define RIGHT_BUTTON_EXTI_IRQn EXTI9_5_IRQn /** * @brief Joystick Left */ #define LEFT_BUTTON_PIN GPIO_Pin_11 #define LEFT_BUTTON_GPIO_PORT GPIOG #define LEFT_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOG #define LEFT_BUTTON_EXTI_LINE EXTI_Line11 #define LEFT_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOG #define LEFT_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource11 #define LEFT_BUTTON_EXTI_IRQn EXTI15_10_IRQn /** * @brief Joystick Up */ #define UP_BUTTON_PIN GPIO_Pin_7 #define UP_BUTTON_GPIO_PORT GPIOG #define UP_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOG #define UP_BUTTON_EXTI_LINE EXTI_Line7 #define UP_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOG #define UP_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource7 #define UP_BUTTON_EXTI_IRQn EXTI9_5_IRQn /** * @brief Joystick Down */ #define DOWN_BUTTON_PIN GPIO_Pin_8 #define DOWN_BUTTON_GPIO_PORT GPIOG #define DOWN_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOG #define DOWN_BUTTON_EXTI_LINE EXTI_Line8 #define DOWN_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOG #define DOWN_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource8 #define DOWN_BUTTON_EXTI_IRQn EXTI9_5_IRQn /** * @brief Joystick Sel */ #define SEL_BUTTON_PIN GPIO_Pin_15 #define SEL_BUTTON_GPIO_PORT GPIOG #define SEL_BUTTON_GPIO_CLK RCC_AHB1Periph_GPIOG #define SEL_BUTTON_EXTI_LINE EXTI_Line15 #define SEL_BUTTON_EXTI_PORT_SOURCE EXTI_PortSourceGPIOG #define SEL_BUTTON_EXTI_PIN_SOURCE EXTI_PinSource15 #define SEL_BUTTON_EXTI_IRQn EXTI15_10_IRQn /** * @} */ /** @addtogroup STM3220F_EVAL_LOW_LEVEL_COM * @{ */ #define COMn 2 /** * @brief Definition for COM port1, connected to USART6 */ #define EVAL_COM1 USART6 #define EVAL_COM1_CLK RCC_APB2Periph_USART6 #define EVAL_COM1_TX_PIN GPIO_Pin_6 #define EVAL_COM1_TX_GPIO_PORT GPIOC #define EVAL_COM1_TX_GPIO_CLK RCC_AHB1Periph_GPIOC #define EVAL_COM1_TX_SOURCE GPIO_PinSource6 #define EVAL_COM1_TX_AF GPIO_AF_USART6 #define EVAL_COM1_RX_PIN GPIO_Pin_9 #define EVAL_COM1_RX_GPIO_PORT GPIOG #define EVAL_COM1_RX_GPIO_CLK RCC_AHB1Periph_GPIOG #define EVAL_COM1_RX_SOURCE GPIO_PinSource9 #define EVAL_COM1_RX_AF GPIO_AF_USART6 #define EVAL_COM1_IRQn USART6_IRQn /** * @brief Definition for COM port2, connected to USART3 */ #define EVAL_COM2 USART3 #define EVAL_COM2_CLK RCC_APB1Periph_USART3 #define EVAL_COM2_TX_PIN GPIO_Pin_8 #define EVAL_COM2_TX_GPIO_PORT GPIOD #define EVAL_COM2_TX_GPIO_CLK RCC_AHB1Periph_GPIOD #define EVAL_COM2_TX_SOURCE GPIO_PinSource8 #define EVAL_COM2_TX_AF GPIO_AF_USART3 #define EVAL_COM2_RX_PIN GPIO_Pin_9 #define EVAL_COM2_RX_GPIO_PORT GPIOD #define EVAL_COM2_RX_GPIO_CLK RCC_AHB1Periph_GPIOD #define EVAL_COM2_RX_SOURCE GPIO_PinSource9 #define EVAL_COM2_RX_AF GPIO_AF_USART3 #define EVAL_COM2_RTS_PIN GPIO_Pin_12 #define EVAL_COM2_RTS_GPIO_PORT GPIOD #define EVAL_COM2_RTS_GPIO_CLK RCC_AHB1Periph_GPIOD #define EVAL_COM2_RTS_SOURCE GPIO_PinSource12 #define EVAL_COM2_RTS_AF GPIO_AF_USART3 #define EVAL_COM2_CTS_PIN GPIO_Pin_11 #define EVAL_COM2_CTS_GPIO_PORT GPIOD #define EVAL_COM2_CTS_GPIO_CLK RCC_AHB1Periph_GPIOD #define EVAL_COM2_CTS_SOURCE GPIO_PinSource11 #define EVAL_COM2_CTS_AF GPIO_AF_USART3 #define EVAL_COM2_IRQn USART3_IRQn /** * @BUZZER */ #define BUZZER_GPIO_PIN GPIO_Pin_1 #define BUZZER_GPIO_PORT GPIOB #define BUZZER_GPIO_CLK RCC_AHB1Periph_GPIOB #define BUZZER_PIN_SOURCE GPIO_PinSource1 /** * @USB HOST */ #define OTG_FS_VBUS_PIN GPIO_Pin_9 #define OTG_FS_VBUS_PORT GPIOA #define OTG_FS_VBUS_CLK RCC_AHB1Periph_GPIOA #define OTG_FS_VBUS_SOURCE GPIO_PinSource9 #define USB_FS_VBUSON_PIN GPIO_Pin_2 #define USB_FS_VBUSON_PORT GPIOC #define USB_FS_VBUSON_CLK RCC_AHB1Periph_GPIOC #define USB_FS_VBUSON_SOURCE GPIO_PinSource2 #define USB_FS_FAULT_PIN GPIO_Pin_10 #define USB_FS_FAULT_PORT GPIOB #define USB_FS_FAULT_CLK RCC_AHB1Periph_GPIOB #define USB_FS_FAULT_SOURCE GPIO_PinSource10 /** * @USB OTG */ #define OTG_HS_VBUS_PIN GPIO_Pin_13 #define OTG_HS_VBUS_PORT GPIOB #define OTG_HS_VBUS_CLK RCC_AHB1Periph_GPIOB #define OTG_HS_VBUS_SOURCE GPIO_PinSource13 #define USB_HS_VBUSON_PIN GPIO_Pin_3 #define USB_HS_VBUSON_PORT GPIOE #define USB_HS_VBUSON_CLK RCC_AHB1Periph_GPIOE #define USB_HS_VBUSON_SOURCE GPIO_PinSource3 #define USB_HS_FAULT_PIN GPIO_Pin_13 #define USB_HS_FAULT_PORT GPIOD #define USB_HS_FAULT_CLK RCC_AHB1Periph_GPIOD #define USB_HS_FAULT_SOURCE GPIO_PinSource13 #define OTG_HS_ID_PIN GPIO_Pin_12 #define OTG_HS_ID_PORT GPIOB #define OTG_HS_ID_CLK RCC_AHB1Periph_GPIOB #define OTG_HS_ID_SOURCE GPIO_PinSource12 /** * @TRIMER */ #define TRIMER_PIN GPIO_Pin_0 #define TRIMER_PORT GPIOC #define TRIMER_CLK RCC_AHB1Periph_GPIOC #define TRIMER_SOURCE GPIO_PinSource0 #define TRIMER_CHANNEL ADC_Channel_10 /** * @SD */ // THESE ARE NOT PRESENT OPN THE OLIMEX BOARD!!! //#define SD_CP_PIN GPIO_Pin_3 //#define SD_CP_PORT GPIOD //#define SD_CP_CLK RCC_AHB1Periph_GPIOD //#define SD_CP_SOURCE GPIO_PinSource3 // //#define SD_WP_PIN GPIO_Pin_4 //#define SD_WP_PORT GPIOE //#define SD_WP_CLK RCC_AHB1Periph_GPIOE //#define SD_WP_SOURCE GPIO_PinSource4 #if 0 // MMC mode #define SD_CMD_PIN GPIO_Pin_2 #define SD_CMD_PORT GPIOD #define SD_CMD_CLK RCC_AHB1Periph_GPIOD #define SD_CMD_SOURCE GPIO_PinSource2 #define SD_D0_PIN GPIO_Pin_8 #define SD_D0_PORT GPIOC #define SD_D0_CLK RCC_AHB1Periph_GPIOC #define SD_D0_SOURCE GPIO_PinSource8 #define SD_D1_PIN GPIO_Pin_9 #define SD_D1_PORT GPIOC #define SD_D1_CLK RCC_AHB1Periph_GPIOC #define SD_D1_SOURCE GPIO_PinSource9 #define SD_D2_PIN GPIO_Pin_10 #define SD_D2_PORT GPIOC #define SD_D2_CLK RCC_AHB1Periph_GPIOC #define SD_D2_SOURCE GPIO_PinSource10 #define SD_D3_PIN GPIO_Pin_11 #define SD_D3_PORT GPIOC #define SD_D3_CLK RCC_AHB1Periph_GPIOC #define SD_D3_SOURCE GPIO_PinSource11 #define SD_CLK_PIN GPIO_Pin_12 #define SD_CLK_PORT GPIOC #define SD_CLK_CLK RCC_AHB1Periph_GPIOC #define SD_CLK_SOURCE GPIO_PinSource12 /** @addtogroup STM3220F_EVAL_LOW_LEVEL_SD_FLASH * @{ */ /** * @brief SD FLASH SDIO Interface */ #define SD_SDIO_DMA_STREAM3 3 //#define SD_SDIO_DMA_STREAM6 6 #ifdef SD_SDIO_DMA_STREAM3 #define SD_SDIO_DMA_STREAM DMA2_Stream3 #define SD_SDIO_DMA_CHANNEL DMA_Channel_4 #define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF3 #define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF3 #define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF3 #define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF3 #define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF3 #elif defined SD_SDIO_DMA_STREAM6 #define SD_SDIO_DMA_STREAM DMA2_Stream6 #define SD_SDIO_DMA_CHANNEL DMA_Channel_4 #define SD_SDIO_DMA_FLAG_FEIF DMA_FLAG_FEIF6 #define SD_SDIO_DMA_FLAG_DMEIF DMA_FLAG_DMEIF6 #define SD_SDIO_DMA_FLAG_TEIF DMA_FLAG_TEIF6 #define SD_SDIO_DMA_FLAG_HTIF DMA_FLAG_HTIF6 #define SD_SDIO_DMA_FLAG_TCIF DMA_FLAG_TCIF6 #endif /* SD_SDIO_DMA_STREAM3 */ #else // SPI mode /** * @brief MMC/SD Card Card chip select */ #define MMC_CS_PORT GPIOD #define MMC_CS_CLK RCC_AHB1Periph_GPIOD #define MMC_CS_PIN GPIO_Pin_2 #define MMC_CS_EXTI_LINE EXTI_Line2 #define MMC_CS_PORT_SOURCE GPIO_PortSourceGPIOD #define MMC_CS_PIN_SOURCE GPIO_PinSource2 #define MMC_CS_IRQn EXTI2_IRQn /** * @brief MMC/SD Card SPI */ #define MMC_SPI SPI3 /* SPI pins are remapped by software */ #define MMC_SPI_CLK RCC_APB1Periph_SPI3 #define MMC_SPI_GPIO GPIOC #define MMC_SPI_GPIO_CLK RCC_AHB1Periph_GPIOC #define MMC_PIN_SCK GPIO_Pin_10 #define MMC_PIN_SCK_SOURCE GPIO_PinSource10 #define MMC_PIN_MISO GPIO_Pin_11 #define MMC_PIN_MISO_SOURCE GPIO_PinSource11 #define MMC_PIN_MOSI GPIO_Pin_12 #define MMC_PIN_MOSI_SOURCE GPIO_PinSource12 #endif /** * @} */ /** * @CAN */ #define CAN_TX_PIN GPIO_Pin_9 #define CAN_TX_PORT GPIOB #define CAN_TX_CLK RCC_AHB1Periph_GPIOB #define CAN_TX_AF GPIO_AF_CAN1 #define CAN_TX_SOURCE GPIO_PinSource9 #define CAN_RX_PIN GPIO_Pin_8 #define CAN_RX_PORT GPIOB #define CAN_RX_CLK RCC_AHB1Periph_GPIOB #define CAN_RX_AF GPIO_AF_CAN1 #define CAN_RX_SOURCE GPIO_PinSource8 #define CAN_CTRL_PIN GPIO_Pin_7 #define CAN_CTRL_PORT GPIOF #define CAN_CTRL_CLK RCC_AHB1Periph_GPIOF #define CAN_CTRL_SOURCE GPIO_PinSource7 /** @addtogroup STM3220F_EVAL_LOW_LEVEL_I2C_EE * @{ */ /** * @brief I2C EEPROM Interface pins */ #define sEE_I2C I2C1 #define sEE_I2C_CLK RCC_APB1Periph_I2C1 #define sEE_I2C_SCL_PIN GPIO_Pin_6 /* PB.06 */ #define sEE_I2C_SCL_GPIO_PORT GPIOB /* GPIOB */ #define sEE_I2C_SCL_GPIO_CLK RCC_AHB1Periph_GPIOB #define sEE_I2C_SCL_SOURCE GPIO_PinSource6 #define sEE_I2C_SCL_AF GPIO_AF_I2C1 #define sEE_I2C_SDA_PIN GPIO_Pin_9 /* PB.09 */ #define sEE_I2C_SDA_GPIO_PORT GPIOB /* GPIOB */ #define sEE_I2C_SDA_GPIO_CLK RCC_AHB1Periph_GPIOB #define sEE_I2C_SDA_SOURCE GPIO_PinSource9 #define sEE_I2C_SDA_AF GPIO_AF_I2C1 #define sEE_M24C64_32 #define sEE_I2C_DMA DMA1 #define sEE_I2C_DMA_CHANNEL DMA_Channel_1 #define sEE_I2C_DMA_STREAM_TX DMA1_Stream6 #define sEE_I2C_DMA_STREAM_RX DMA1_Stream0 #define sEE_I2C_DMA_CLK RCC_AHB1Periph_DMA1 #define sEE_I2C_DR_Address ((uint32_t)0x40005410) #define sEE_USE_DMA #define sEE_I2C_DMA_TX_IRQn DMA1_Stream6_IRQn #define sEE_I2C_DMA_RX_IRQn DMA1_Stream0_IRQn #define sEE_I2C_DMA_TX_IRQHandler DMA1_Stream6_IRQHandler #define sEE_I2C_DMA_RX_IRQHandler DMA1_Stream0_IRQHandler #define sEE_I2C_DMA_PREPRIO 0 #define sEE_I2C_DMA_SUBPRIO 0 #define sEE_TX_DMA_FLAG_FEIF DMA_FLAG_FEIF6 #define sEE_TX_DMA_FLAG_DMEIF DMA_FLAG_DMEIF6 #define sEE_TX_DMA_FLAG_TEIF DMA_FLAG_TEIF6 #define sEE_TX_DMA_FLAG_HTIF DMA_FLAG_HTIF6 #define sEE_TX_DMA_FLAG_TCIF DMA_FLAG_TCIF6 #define sEE_RX_DMA_FLAG_FEIF DMA_FLAG_FEIF0 #define sEE_RX_DMA_FLAG_DMEIF DMA_FLAG_DMEIF0 #define sEE_RX_DMA_FLAG_TEIF DMA_FLAG_TEIF0 #define sEE_RX_DMA_FLAG_HTIF DMA_FLAG_HTIF0 #define sEE_RX_DMA_FLAG_TCIF DMA_FLAG_TCIF0 #define sEE_DIRECTION_TX 0 #define sEE_DIRECTION_RX 1 /* Time constant for the delay caclulation allowing to have a millisecond incrementing counter. This value should be equal to (System Clock / 1000). ie. if system clock = 120MHz then sEE_TIME_CONST should be 120. */ #define sEE_TIME_CONST 120 /** * @} */ /** * @} */ /** @defgroup STM3220F_EVAL_LOW_LEVEL_Exported_Macros * @{ */ /** * @} */ /** @defgroup STM3220F_EVAL_LOW_LEVEL_Exported_Functions * @{ */ void STM_EVAL_GPIOReset(void); void STM_EVAL_LEDInit(Led_TypeDef Led); void STM_EVAL_LEDOn(Led_TypeDef Led); void STM_EVAL_LEDOff(Led_TypeDef Led); void STM_EVAL_LEDToggle(Led_TypeDef Led); void STM_EVAL_PBInit(Button_TypeDef Button, ButtonMode_TypeDef Button_Mode); uint32_t STM_EVAL_PBGetState(Button_TypeDef Button); void STM_EVAL_COMInit(COM_TypeDef COM, USART_InitTypeDef* USART_InitStruct); void SD_LowLevel_DeInit(void); void SD_LowLevel_Init(void); void SD_LowLevel_DMA_TxConfig(uint32_t *BufferSRC, uint32_t BufferSize); void SD_LowLevel_DMA_RxConfig(uint32_t *BufferDST, uint32_t BufferSize); uint32_t SD_DMAEndOfTransferStatus(void); void sEE_LowLevel_DeInit(void); void sEE_LowLevel_Init(void); void sEE_LowLevel_DMAConfig(uint32_t pBuffer, uint32_t BufferSize, uint32_t Direction); /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM3220F_EVAL_H */ /** * @} */ /** * @} */ /** * @} */ /** * @} */ /******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/