/*********************************************************************************************************
*
* File                : usart.c
* Hardware Environment: 
* Build Environment   : RealView MDK-ARM  Version: 4.20
* Version             : V1.0
* By                  : 
*
*                                  (c) Copyright 2005-2011, WaveShare
*                                       http://www.waveshare.net
*                                          All Rights Reserved
*
*********************************************************************************************************/

#include "usart.h"

#ifdef __GNUC__
  /* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
     set to 'Yes') calls __io_putchar() */
  #define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
  #define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */


/*******************************************************************************
* Function Name  : USART_Configuration
* Description    : Configure USART1 
* Input          : None
* Output         : None
* Return         : None
* Attention		 : None
*******************************************************************************/
void USART_Configuration(void)
{ 
  GPIO_InitTypeDef GPIO_InitStructure;
  USART_InitTypeDef USART_InitStructure; 

  RCC_APB2PeriphClockCmd( RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1,ENABLE);
  /*
  *  USART1_TX -> PA9 , USART1_RX ->	PA10
  */				
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;	         
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; 
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; 
  GPIO_Init(GPIOA, &GPIO_InitStructure);		   

  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;	        
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;  
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; 
  GPIO_Init(GPIOA, &GPIO_InitStructure);

  USART_InitStructure.USART_BaudRate = 115200;
  USART_InitStructure.USART_WordLength = USART_WordLength_8b;
  USART_InitStructure.USART_StopBits = USART_StopBits_1;
  USART_InitStructure.USART_Parity = USART_Parity_No;
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;

  USART_Init(USART1, &USART_InitStructure); 
  USART_ClearFlag(USART1,USART_FLAG_TC);
  USART_ITConfig(USART1, USART_IT_RXNE, ENABLE);
  //USART_ITConfig(USART1, USART_IT_TXE, ENABLE);
  USART_Cmd(USART1, ENABLE);
}


void UsartGPIO_CTRT_Configuration(void)
{
  	GPIO_InitTypeDef GPIO_InitStruct;

	GPIO_InitStruct.GPIO_Mode = GPIO_Mode_AF_PP;
	GPIO_InitStruct.GPIO_Pin = GPIO_Pin_9 | GPIO_Pin_12;
	GPIO_InitStruct.GPIO_Speed = GPIO_Speed_50MHz;

	GPIO_Init(GPIOA, &GPIO_InitStruct);

	GPIO_InitStruct.GPIO_Mode = GPIO_Mode_IN_FLOATING;
	GPIO_InitStruct.GPIO_Pin = GPIO_Pin_10 | GPIO_Pin_11;
	
	GPIO_Init(GPIOA, &GPIO_InitStruct);
}


void USART_CTRT_Configuartion(void)
{
	USART_InitTypeDef USART_InitStruct;

	RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_USART1 | RCC_APB2Periph_AFIO,ENABLE);

	USART_InitStruct.USART_BaudRate = 115200;
	USART_InitStruct.USART_StopBits = USART_StopBits_1;
	USART_InitStruct.USART_WordLength = USART_WordLength_8b;
	USART_InitStruct.USART_Parity = USART_Parity_No;
	USART_InitStruct.USART_HardwareFlowControl = USART_HardwareFlowControl_RTS_CTS;
	USART_InitStruct.USART_Mode = USART_Mode_Tx | USART_Mode_Rx;
	
	USART_Init(USART1, &USART_InitStruct);

	USART_Cmd(USART1, ENABLE);

	UsartGPIO_CTRT_Configuration();
}

/* Use no semihosting */
#if 1
#pragma import(__use_no_semihosting)
struct __FILE
{  
	int handle;
};
FILE __stdout;

_sys_exit(int x)
{
	x = x;
}
#endif

/**
  * @brief  Retargets the C library printf function to the USART.
  * @param  None
  * @retval None
  */
PUTCHAR_PROTOTYPE
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(USART1, (uint8_t) ch);
	//USART_SendData(USART1,(u8)ch);

  /* Loop until the end of transmission */
  while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET)
	//while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET)
  {}

  return ch;
}