$ Date Time State Comment Pressure Bel Pos Batt Volt CTD Temp CTD Sal LPS331 Press LPS311 Temp SHT21 Humid SHT21 Temp FLBB Topt Tphase Rphase NO3 pH LPF PVel Diff PVel LPF PAcc Press Avg Press Var PID SP PID PV PID Y1 PID Y2 PID I PID v PID u PID uCPS Batt Amps 12V Amps 3.3V Amps Debug GPS Irid Modem $ 27-Oct-2015 21:37:52.951 Init Mission Reset Controller Status Register Value = 65537 $ 27-Oct-2015 21:37:52.957 Init Mission File Name = \SD\2015-10-27T21-37-51 $ 27-Oct-2015 21:37:52.962 Init Mission Volume Total Size: 7939817472 $ 27-Oct-2015 21:37:52.969 Init Mission Volume Free Space: 7662010368 $ 27-Oct-2015 21:37:53.032 Init Mission PlatVel PID K = 80 $ 27-Oct-2015 21:37:53.112 Init Mission PlatVel PID Ti = 50000 $ 27-Oct-2015 21:37:53.193 Init Mission PlatVel PID Td = 10 $ 27-Oct-2015 21:37:53.274 Init Mission PlatVel PID Tf = 2 $ 27-Oct-2015 21:37:53.354 Init Mission PlatVel PID Tt = 100 $ 27-Oct-2015 21:37:53.435 Init Mission PlatVel PID B = 1 $ 27-Oct-2015 21:37:53.516 Init Mission PlatVel PID uLow = -50 $ 27-Oct-2015 21:37:53.596 Init Mission PlatVel PID uHigh = 50 $ 27-Oct-2015 21:37:53.677 Init Mission PlatVel PID h = 3 $ 27-Oct-2015 21:37:53.758 Init Mission Engr Logger Initialized $ 27-Oct-2015 21:37:56.843 Init Mission Sending CR/LF $ 27-Oct-2015 21:38:02.849 Init Mission Sending stopProfile $ 27-Oct-2015 21:38:02.854 Init Mission Sending pcutoff $ 27-Oct-2015 21:38:03.859 Init Mission Sending outputPTSyes $ 27-Oct-2015 21:38:04.865 Init Mission Sending tsWait $ 27-Oct-2015 21:38:05.870 Init Mission Reading Mission Configuration File $ 27-Oct-2015 21:38:05.876 Init Mission Recovery mode = True $ 27-Oct-2015 21:38:05.881 Init Mission Park Sample Period = 00:01:00 $ 27-Oct-2015 21:38:05.888 Init Mission Pressure table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:05:00, 7 $ 27-Oct-2015 21:38:05.896 Init Mission Ascend table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:05.958 Init Mission Ascend table 1 Pressure, PV, Park Time, sample list: 55, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.039 Init Mission Ascend table 2 Pressure, PV, Park Time, sample list: 50, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.120 Init Mission Ascend table 3 Pressure, PV, Park Time, sample list: 45, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.201 Init Mission Ascend table 4 Pressure, PV, Park Time, sample list: 40, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.281 Init Mission Ascend table 5 Pressure, PV, Park Time, sample list: 35, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.362 Init Mission Ascend table 6 Pressure, PV, Park Time, sample list: 30, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.443 Init Mission Ascend table 7 Pressure, PV, Park Time, sample list: 25, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.524 Init Mission Ascend table 8 Pressure, PV, Park Time, sample list: 20, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.604 Init Mission Ascend table 9 Pressure, PV, Park Time, sample list: 18, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.685 Init Mission Ascend table 10 Pressure, PV, Park Time, sample list: 16, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.766 Init Mission Ascend table 11 Pressure, PV, Park Time, sample list: 14, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.847 Init Mission Ascend table 12 Pressure, PV, Park Time, sample list: 12, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:06.927 Init Mission Ascend table 13 Pressure, PV, Park Time, sample list: 10, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:07.008 Init Mission Ascend table 14 Pressure, PV, Park Time, sample list: 8, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:07.089 Init Mission Ascend table 15 Pressure, PV, Park Time, sample list: 6, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:07.169 Init Mission Ascend table 16 Pressure, PV, Park Time, sample list: 4, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:07.250 Init Mission Ascend table 17 Pressure, PV, Park Time, sample list: 2, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:07.331 Init Mission Ascend table 18 Pressure, PV, Park Time, sample list: 0, 0.100, 00:00:00, 7 $ 27-Oct-2015 21:38:10.420 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 2 Num commas: 0 $ 27-Oct-2015 21:37:56.853 Init Mission Unparsed SBE41 Message $ 27-Oct-2015 21:38:10.442 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 15 Num commas: 0 $ 27-Oct-2015 21:38:02.890 Init Mission Unparsed SBE41 Message S>stopprofile $ 27-Oct-2015 21:38:10.464 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 15 Num commas: 0 $ 27-Oct-2015 21:38:03.896 Init Mission Unparsed SBE41 Message S>outputpts=y $ 27-Oct-2015 21:38:10.594 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 12 Num commas: 0 $ 27-Oct-2015 21:38:04.892 Init Mission Unparsed SBE41 Message S>tswait=2 $ 27-Oct-2015 21:38:10.834 Init Mission PTH Message 1009.676758 22.841667 55.763763 23.099087 $ 27-Oct-2015 21:38:11.049 Init Mission State Entry $ 27-Oct-2015 21:38:11.053 Init Mission Bellows Position = 68.456 Battery Voltage = 30.60 and Current = 0.179 30.600000 0.178750 $ 27-Oct-2015 21:38:11.267 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.454614 30.600000 0.178750 -100.000000 $ 27-Oct-2015 21:38:14.097 Init Mission Initializing FLBB $ 27-Oct-2015 21:38:16.313 Init Mission FLBB Message NaN Sending FLBB stop command $ 27-Oct-2015 21:38:16.322 Init Mission FLBB Message NaN Sending FLBB pkt command: $pkt 2 $ 27-Oct-2015 21:38:16.332 Init Mission FLBB Message NaN Sending FLBB ave command: $ave 3 $ 27-Oct-2015 21:38:16.342 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.453883 30.600000 0.177500 -100.000000 $ 27-Oct-2015 21:38:17.171 Init Mission Bellows inside limits $ 27-Oct-2015 21:38:17.378 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.454813 30.600000 0.172500 -100.000000 $ 27-Oct-2015 21:38:20.710 Init Mission Extending Bellows 68.455520 $ 27-Oct-2015 21:38:21.920 Init Mission Extending Bellows 68.489056 $ 27-Oct-2015 21:38:23.130 Init Mission Extending Bellows 68.527021 $ 27-Oct-2015 21:38:24.343 Init Mission Extending Bellows 68.567168 $ 27-Oct-2015 21:38:25.553 Init Mission Extending Bellows 68.602903 $ 27-Oct-2015 21:38:26.763 Init Mission Extending Bellows 68.638646 $ 27-Oct-2015 21:38:27.973 Init Mission Extending Bellows 68.677731 $ 27-Oct-2015 21:38:29.183 Init Mission Extending Bellows 68.716850 $ 27-Oct-2015 21:38:30.396 Init Mission Extending Bellows 68.758380 $ 27-Oct-2015 21:38:31.606 Init Mission Extending Bellows 68.799599 $ 27-Oct-2015 21:38:33.318 Init Mission Retracting Bellows 68.844229 $ 27-Oct-2015 21:38:34.527 Init Mission Retracting Bellows 68.810946 $ 27-Oct-2015 21:38:35.737 Init Mission Retracting Bellows 68.769190 $ 27-Oct-2015 21:38:36.950 Init Mission Retracting Bellows 68.729328 $ 27-Oct-2015 21:38:38.160 Init Mission Retracting Bellows 68.689733 $ 27-Oct-2015 21:38:39.370 Init Mission Retracting Bellows 68.650256 $ 27-Oct-2015 21:38:40.580 Init Mission Retracting Bellows 68.611192 $ 27-Oct-2015 21:38:41.790 Init Mission Retracting Bellows 68.570780 $ 27-Oct-2015 21:38:43.005 Init Mission Retracting Bellows 68.528305 $ 27-Oct-2015 21:38:44.215 Init Mission Retracting Bellows 68.486677 $ 27-Oct-2015 21:38:47.449 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.442532 30.600000 0.173750 -100.000000 $ 27-Oct-2015 21:38:47.462 Init Mission Sending SBE41 ds command $ 27-Oct-2015 21:38:47.470 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.442532 30.600000 0.173750 -100.000000 $ 27-Oct-2015 21:38:50.502 Init Mission Sending SBE41 ds command $ 27-Oct-2015 21:38:50.513 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 27-Oct-2015 21:38:47.483 Init Mission Unparsed SBE41 Message S>ds $ 27-Oct-2015 21:38:50.528 Init Mission Looking for SBE 41: real-time output is P got: S>ds $ 27-Oct-2015 21:38:50.550 Init Mission Looking for SBE 41: real-time output is P got: SBE 41CP UW V 2.0 SERIAL NO. 4748 $ 27-Oct-2015 21:38:50.607 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 51 Num commas: 0 $ 27-Oct-2015 21:38:47.575 Init Mission Unparsed SBE41 Message firmware compilation date: 18 December 2007 09:20 $ 27-Oct-2015 21:38:50.750 Init Mission Looking for SBE 41: real-time output is P got: firmware compilation date: 18 December 2007 09:20 $ 27-Oct-2015 21:38:50.850 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 56 Num commas: 0 $ 27-Oct-2015 21:38:47.646 Init Mission Unparsed SBE41 Message stop profile when pressure is less than = 2.0 decibars $ 27-Oct-2015 21:38:50.992 Init Mission Looking for SBE 41: real-time output is P got: stop profile when pressure is less than = 2.0 decibars $ 27-Oct-2015 21:38:51.092 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 52 Num commas: 0 $ 27-Oct-2015 21:38:47.697 Init Mission Unparsed SBE41 Message automatic bin averaging at end of profile disabled $ 27-Oct-2015 21:38:51.234 Init Mission Looking for SBE 41: real-time output is P got: automatic bin averaging at end of profile disabled $ 27-Oct-2015 21:38:51.334 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 21:38:47.718 Init Mission Unparsed SBE41 Message number of samples = 0 $ 27-Oct-2015 21:38:51.476 Init Mission Looking for SBE 41: real-time output is P got: number of samples = 0 $ 27-Oct-2015 21:38:51.576 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 20 Num commas: 0 $ 27-Oct-2015 21:38:47.738 Init Mission Unparsed SBE41 Message number of bins = 0 $ 27-Oct-2015 21:38:51.718 Init Mission Looking for SBE 41: real-time output is P got: number of bins = 0 $ 27-Oct-2015 21:38:51.818 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 21:38:47.769 Init Mission Unparsed SBE41 Message top bin interval = 10 $ 27-Oct-2015 21:38:51.960 Init Mission Looking for SBE 41: real-time output is P got: top bin interval = 10 $ 27-Oct-2015 21:38:52.060 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 27-Oct-2015 21:38:47.799 Init Mission Unparsed SBE41 Message top bin size = 10 $ 27-Oct-2015 21:38:52.202 Init Mission Looking for SBE 41: real-time output is P got: top bin size = 10 $ 27-Oct-2015 21:38:52.302 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 27-Oct-2015 21:38:47.830 Init Mission Unparsed SBE41 Message top bin max = 100 $ 27-Oct-2015 21:38:52.444 Init Mission Looking for SBE 41: real-time output is P got: top bin max = 100 $ 27-Oct-2015 21:38:52.544 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 27-Oct-2015 21:38:47.870 Init Mission Unparsed SBE41 Message middle bin interval = 50 $ 27-Oct-2015 21:38:52.687 Init Mission Looking for SBE 41: real-time output is P got: middle bin interval = 50 $ 27-Oct-2015 21:38:52.787 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 22 Num commas: 0 $ 27-Oct-2015 21:38:47.901 Init Mission Unparsed SBE41 Message middle bin size = 50 $ 27-Oct-2015 21:38:52.929 Init Mission Looking for SBE 41: real-time output is P got: middle bin size = 50 $ 27-Oct-2015 21:38:53.042 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 21:38:47.932 Init Mission Unparsed SBE41 Message middle bin max = 1000 $ 27-Oct-2015 21:38:53.171 Init Mission Looking for SBE 41: real-time output is P got: middle bin max = 1000 $ 27-Oct-2015 21:38:53.277 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:47.962 Init Mission Unparsed SBE41 Message bottom bin interval = 100 $ 27-Oct-2015 21:38:53.413 Init Mission Looking for SBE 41: real-time output is P got: bottom bin interval = 100 $ 27-Oct-2015 21:38:53.513 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 21:38:47.993 Init Mission Unparsed SBE41 Message bottom bin size = 100 $ 27-Oct-2015 21:38:53.655 Init Mission Looking for SBE 41: real-time output is P got: bottom bin size = 100 $ 27-Oct-2015 21:38:53.755 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 36 Num commas: 0 $ 27-Oct-2015 21:38:48.034 Init Mission Unparsed SBE41 Message do not include two transition bins $ 27-Oct-2015 21:38:53.898 Init Mission Looking for SBE 41: real-time output is P got: do not include two transition bins $ 27-Oct-2015 21:38:53.998 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 32 Num commas: 0 $ 27-Oct-2015 21:38:48.064 Init Mission Unparsed SBE41 Message do not include samples per bin $ 27-Oct-2015 21:38:54.140 Init Mission Looking for SBE 41: real-time output is P got: do not include samples per bin $ 27-Oct-2015 21:38:54.240 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 38 Num commas: 0 $ 27-Oct-2015 21:38:48.105 Init Mission Unparsed SBE41 Message pumped take sample wait time = 2 sec $ 27-Oct-2015 21:38:54.382 Init Mission Looking for SBE 41: real-time output is P got: pumped take sample wait time = 2 sec $ 27-Oct-2015 21:38:54.482 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:48.135 Init Mission Unparsed SBE41 Message real-time output is PTS $ 27-Oct-2015 21:38:54.624 Init Mission Looking for SBE 41: real-time output is P got: real-time output is PTS $ 27-Oct-2015 21:38:55.110 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.439660 30.600000 0.180000 -100.000000 $ 27-Oct-2015 21:38:55.123 Init Mission Sending SBE41 ds command $ 27-Oct-2015 21:38:55.128 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.439660 30.600000 0.180000 -100.000000 $ 27-Oct-2015 21:38:58.159 Init Mission Sending SBE41 dc command $ 27-Oct-2015 21:38:58.376 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 27-Oct-2015 21:38:58.177 Init Mission Unparsed SBE41 Message S>dc $ 27-Oct-2015 21:38:58.391 Init Mission Looking for SBE 41: POFFSET got: S>dc $ 27-Oct-2015 21:38:58.411 Init Mission Looking for SBE 41: POFFSET got: SBE 41CP UW V 2.0 SERIAL NO. 4748 $ 27-Oct-2015 21:38:58.438 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:58.258 Init Mission Unparsed SBE41 Message temperature: 09-oct-12 $ 27-Oct-2015 21:38:58.544 Init Mission Looking for SBE 41: POFFSET got: temperature: 09-oct-12 $ 27-Oct-2015 21:38:58.644 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:58.289 Init Mission Unparsed SBE41 Message TA0 = 3.212005e-05 $ 27-Oct-2015 21:38:58.786 Init Mission Looking for SBE 41: POFFSET got: TA0 = 3.212005e-05 $ 27-Oct-2015 21:38:58.886 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:58.320 Init Mission Unparsed SBE41 Message TA1 = 2.710063e-04 $ 27-Oct-2015 21:38:59.028 Init Mission Looking for SBE 41: POFFSET got: TA1 = 2.710063e-04 $ 27-Oct-2015 21:38:59.129 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:58.350 Init Mission Unparsed SBE41 Message TA2 = -2.206761e-06 $ 27-Oct-2015 21:38:59.270 Init Mission Looking for SBE 41: POFFSET got: TA2 = -2.206761e-06 $ 27-Oct-2015 21:38:59.370 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:58.390 Init Mission Unparsed SBE41 Message TA3 = 1.436900e-07 $ 27-Oct-2015 21:38:59.512 Init Mission Looking for SBE 41: POFFSET got: TA3 = 1.436900e-07 $ 27-Oct-2015 21:38:59.815 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 27-Oct-2015 21:38:58.432 Init Mission Unparsed SBE41 Message conductivity: 09-oct-12 $ 27-Oct-2015 21:38:59.831 Init Mission Looking for SBE 41: POFFSET got: conductivity: 09-oct-12 $ 27-Oct-2015 21:38:59.858 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 21:38:58.445 Init Mission Unparsed SBE41 Message G = -9.713452e-01 $ 27-Oct-2015 21:38:59.997 Init Mission Looking for SBE 41: POFFSET got: G = -9.713452e-01 $ 27-Oct-2015 21:39:00.097 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 21:38:58.480 Init Mission Unparsed SBE41 Message H = 1.428729e-01 $ 27-Oct-2015 21:39:00.239 Init Mission Looking for SBE 41: POFFSET got: H = 1.428729e-01 $ 27-Oct-2015 21:39:00.339 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 21:38:58.511 Init Mission Unparsed SBE41 Message I = -3.602926e-04 $ 27-Oct-2015 21:39:00.481 Init Mission Looking for SBE 41: POFFSET got: I = -3.602926e-04 $ 27-Oct-2015 21:39:00.581 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 21:38:58.541 Init Mission Unparsed SBE41 Message J = 4.629943e-05 $ 27-Oct-2015 21:39:00.724 Init Mission Looking for SBE 41: POFFSET got: J = 4.629943e-05 $ 27-Oct-2015 21:39:00.829 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:58.572 Init Mission Unparsed SBE41 Message CPCOR = -9.570001e-08 $ 27-Oct-2015 21:39:00.966 Init Mission Looking for SBE 41: POFFSET got: CPCOR = -9.570001e-08 $ 27-Oct-2015 21:39:01.072 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:58.613 Init Mission Unparsed SBE41 Message CTCOR = 3.250000e-06 $ 27-Oct-2015 21:39:01.208 Init Mission Looking for SBE 41: POFFSET got: CTCOR = 3.250000e-06 $ 27-Oct-2015 21:39:01.314 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:58.643 Init Mission Unparsed SBE41 Message WBOTC = -8.290229e-07 $ 27-Oct-2015 21:39:01.451 Init Mission Looking for SBE 41: POFFSET got: WBOTC = -8.290229e-07 $ 27-Oct-2015 21:39:01.550 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 55 Num commas: 1 $ 27-Oct-2015 21:38:58.724 Init Mission Unparsed SBE41 Message pressure S/N = 3588090, range = 2900 psia: 04-oct-12 $ 27-Oct-2015 21:39:01.693 Init Mission Looking for SBE 41: POFFSET got: pressure S/N = 3588090, range = 2900 psia: 04-oct-12 $ 27-Oct-2015 21:39:01.793 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:58.755 Init Mission Unparsed SBE41 Message PA0 = 9.502019e-02 $ 27-Oct-2015 21:39:01.935 Init Mission Looking for SBE 41: POFFSET got: PA0 = 9.502019e-02 $ 27-Oct-2015 21:39:02.035 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:58.791 Init Mission Unparsed SBE41 Message PA1 = 1.398889e-01 $ 27-Oct-2015 21:39:02.177 Init Mission Looking for SBE 41: POFFSET got: PA1 = 1.398889e-01 $ 27-Oct-2015 21:39:02.277 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 21:38:58.821 Init Mission Unparsed SBE41 Message PA2 = -4.043459e-08 $ 27-Oct-2015 21:39:02.420 Init Mission Looking for SBE 41: POFFSET got: PA2 = -4.043459e-08 $ 27-Oct-2015 21:39:02.525 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:58.862 Init Mission Unparsed SBE41 Message PTCA0 = 4.041972e+01 $ 27-Oct-2015 21:39:02.662 Init Mission Looking for SBE 41: POFFSET got: PTCA0 = 4.041972e+01 $ 27-Oct-2015 21:39:02.767 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:58.895 Init Mission Unparsed SBE41 Message PTCA1 = -2.065459e-04 $ 27-Oct-2015 21:39:02.904 Init Mission Looking for SBE 41: POFFSET got: PTCA1 = -2.065459e-04 $ 27-Oct-2015 21:39:03.010 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:58.926 Init Mission Unparsed SBE41 Message PTCA2 = 1.354759e-03 $ 27-Oct-2015 21:39:03.146 Init Mission Looking for SBE 41: POFFSET got: PTCA2 = 1.354759e-03 $ 27-Oct-2015 21:39:03.252 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:58.965 Init Mission Unparsed SBE41 Message PTCB0 = 2.527550e+01 $ 27-Oct-2015 21:39:03.389 Init Mission Looking for SBE 41: POFFSET got: PTCB0 = 2.527550e+01 $ 27-Oct-2015 21:39:03.494 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:58.995 Init Mission Unparsed SBE41 Message PTCB1 = 1.100000e-03 $ 27-Oct-2015 21:39:03.631 Init Mission Looking for SBE 41: POFFSET got: PTCB1 = 1.100000e-03 $ 27-Oct-2015 21:39:03.737 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:59.036 Init Mission Unparsed SBE41 Message PTCB2 = 0.000000e+00 $ 27-Oct-2015 21:39:03.873 Init Mission Looking for SBE 41: POFFSET got: PTCB2 = 0.000000e+00 $ 27-Oct-2015 21:39:03.979 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:59.067 Init Mission Unparsed SBE41 Message PTHA0 = -6.951193e+01 $ 27-Oct-2015 21:39:04.115 Init Mission Looking for SBE 41: POFFSET got: PTHA0 = -6.951193e+01 $ 27-Oct-2015 21:39:04.221 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:59.127 Init Mission Unparsed SBE41 Message PTHA1 = 5.247121e-02 $ 27-Oct-2015 21:39:04.358 Init Mission Looking for SBE 41: POFFSET got: PTHA1 = 5.247121e-02 $ 27-Oct-2015 21:39:04.463 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 21:38:59.137 Init Mission Unparsed SBE41 Message PTHA2 = -6.547758e-07 $ 27-Oct-2015 21:39:04.600 Init Mission Looking for SBE 41: POFFSET got: PTHA2 = -6.547758e-07 $ 27-Oct-2015 21:39:04.706 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 29 Num commas: 0 $ 27-Oct-2015 21:38:59.178 Init Mission Unparsed SBE41 Message POFFSET = 0.000000e+00 $ 27-Oct-2015 21:39:04.842 Init Mission Looking for SBE 41: POFFSET got: POFFSET = 0.000000e+00 $ 27-Oct-2015 21:39:05.328 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.440364 30.600000 0.181250 -100.000000 $ 27-Oct-2015 21:39:05.341 Init Mission Sending SBE41 dc command $ 27-Oct-2015 21:39:05.346 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.440364 30.600000 0.181250 -100.000000 $ 27-Oct-2015 21:39:08.580 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.441598 30.600000 0.181250 -100.000000 $ 27-Oct-2015 21:39:11.412 Init Mission Sending Optode Get All command $ 27-Oct-2015 21:39:09.317 Init Mission SBE41 Message -0.100000 -0.10 0.000000 0.000000 -0.000000 -0.100000 0.000000 $ 27-Oct-2015 21:39:12.020 Init Mission PTH Message 1010.318359 22.883333 55.084747 23.313589 $ 27-Oct-2015 21:39:12.016 Init Mission Optode Message -0.100000 !%!Product Name,4330,1996,Optode Sensor $ 27-Oct-2015 21:39:12.016 Init Mission Optode Message -0.100000 Product Number,4330,1996,4330 $ 27-Oct-2015 21:39:12.042 Init Mission Optode Message -0.100000 Serial Number,4330,1996,1996 $ 27-Oct-2015 21:39:12.072 Init Mission Optode Message -0.100000 SW ID,4330,1996,1940006 $ 27-Oct-2015 21:39:12.093 Init Mission Optode Message -0.100000 SW Version,4330,1996,4,8,1 $ 27-Oct-2015 21:39:12.143 Init Mission Optode Message -0.100000 Node Description,4330,1996,Optode Sensor #1996 $ 27-Oct-2015 21:39:12.164 Init Mission Optode Message -0.100000 Owner,4330,1996, $ 27-Oct-2015 21:39:12.184 Init Mission Optode Message -0.100000 Salinity[PSU],4330,1996,0.00 $ 27-Oct-2015 21:39:12.254 Init Mission Optode Message -0.100000 PhaseCoef,4330,1996,-1.360000E+00,1.000000E+00,0.000000E+00,0.000000E+00 $ 27-Oct-2015 21:39:12.296 Init Mission Optode Message -0.100000 FoilID,4330,1996,1206E $ 27-Oct-2015 21:39:12.317 Init Mission SBE41 Message -0.110000 -0.11 0.000301 0.003333 0.000009 -0.101429 0.000014 $ 27-Oct-2015 21:39:12.484 Init Mission Optode Message -0.110000 FoilCoefA,4330,1996,-2.988314E-06,-6.137785E-06,1.684659E-03,-1.857173E-01,6.784399E-04,-5.597908E-07,1.040158E+01,-5.986907E-02,1.360425E-04,-4.776977E-07,-3.032937E+02,2.530496E+00,-1.267045E-02,1.040454E-04 $ 27-Oct-2015 21:39:12.676 Init Mission Optode Message -0.110000 FoilCoefB,4330,1996,-3.560390E-07,3.816713E+03,-4.475507E+01,4.386163E-01,-7.146342E-03,8.906235E-05,-6.343012E-07,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00 $ 27-Oct-2015 21:39:12.757 Init Mission Optode Message -0.110000 FoilPolyDegT,4330,1996,1,0,0,0,1,2,0,1,2,3,0,1,2,3,4,0,1,2,3,4,5,0,0,0,0,0,0,0 $ 27-Oct-2015 21:39:12.838 Init Mission Optode Message -0.110000 FoilPolyDegO,4330,1996,4,5,4,3,3,3,2,2,2,2,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0 $ 27-Oct-2015 21:39:12.935 Init Mission Optode Message -0.110000 SVUFoilCoef,4330,1996,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00 $ 27-Oct-2015 21:39:12.999 Init Mission Optode Message -0.110000 ConcCoef,4330,1996,-1.446043E+00,9.675803E-01 $ 27-Oct-2015 21:39:13.016 Init Mission Optode Message -0.110000 NomAirPress[hPa],4330,1996,1013.25 $ 27-Oct-2015 21:39:13.046 Init Mission Optode Message -0.110000 NomAirMix,4330,1996,0.20946 $ 27-Oct-2015 21:39:13.080 Init Mission Optode Message -0.110000 CalDataSat[Deg],4330,1996,32.69,9.89 $ 27-Oct-2015 21:39:13.113 Init Mission Optode Message -0.110000 CalDataAPress[hPa],4330,1996,936.496 $ 27-Oct-2015 21:39:13.162 Init Mission Optode Message -0.110000 CalDataZero[Deg],4330,1996,62.974,21.484 $ 27-Oct-2015 21:39:13.177 Init Mission Optode Message -0.110000 Mode,4330,1996,AiCaP $ 27-Oct-2015 21:39:13.208 Init Mission Optode Message -0.110000 Enable Sleep,4330,1996,Yes $ 27-Oct-2015 21:39:13.241 Init Mission Optode Message -0.110000 Enable Polled Mode,4330,1996,No $ 27-Oct-2015 21:39:13.265 Init Mission Optode Message -0.110000 Enable Text,4330,1996,Yes $ 27-Oct-2015 21:39:13.295 Init Mission Optode Message -0.110000 Enable Decimalformat,4330,1996,Yes $ 27-Oct-2015 21:39:13.344 Init Mission Optode Message -0.110000 Analog TempLimit[Deg.C],4330,1996,-5.00,35.00 $ 27-Oct-2015 21:39:13.403 Init Mission Optode Message -0.110000 Analog ConcLimit[Deg.C],4330,1996,0.00,800.00 $ 27-Oct-2015 21:39:13.425 Init Mission Optode Message -0.110000 Analog SatLimit[Deg.C],4330,1996,0.00,200.00 $ 27-Oct-2015 21:39:13.484 Init Mission Optode Message -0.110000 Analog PhaseLimit[Deg.C],4330,1996,10.00,70.00 $ 27-Oct-2015 21:39:13.508 Init Mission Optode Message -0.110000 Analog Output,4330,1996,O2Concentration $ 27-Oct-2015 21:39:13.565 Init Mission Optode Message -0.110000 Analog1 Coef,4330,1996,0.000000E+00,1.000000E+00 $ 27-Oct-2015 21:39:13.607 Init Mission Optode Message -0.110000 Analog2 Coef,4330,1996,0.000000E+00,1.000000E+00 $ 27-Oct-2015 21:39:13.645 Init Mission Optode Message -0.110000 Enable AirSaturation,4330,1996,Yes $ 27-Oct-2015 21:39:13.668 Init Mission Optode Message -0.110000 Enable Rawdata,4330,1996,Yes $ 27-Oct-2015 21:39:13.698 Init Mission Optode Message -0.110000 Enable Temperature,4330,1996,Yes $ 27-Oct-2015 21:39:13.737 Init Mission Optode Message -0.110000 Enable HumidityComp,4330,1996,Yes $ 27-Oct-2015 21:39:13.768 Init Mission Optode Message -0.110000 Enable SVUformula,4330,1996,No $ 27-Oct-2015 21:39:13.807 Init Mission Optode Message -0.110000 Interval[s],4330,1996,30.000 $ 27-Oct-2015 21:39:13.820 Init Mission Optode Message -0.110000 Location,4330,1996, $ 27-Oct-2015 21:39:13.861 Init Mission Optode Message -0.110000 Geographic Position,4330,1996,60.323605,5.37225 $ 27-Oct-2015 21:39:13.888 Init Mission Optode Message -0.110000 Vertical Position,4330,1996, $ 27-Oct-2015 21:39:13.909 Init Mission Optode Message -0.110000 Reference,4330,1996, $ 27-Oct-2015 21:39:13.910 Init Mission Optode Message -0.110000 # $ 27-Oct-2015 21:39:15.312 Init Mission SBE41 Message -0.100000 -0.10 0.000504 -0.003333 0.000030 -0.101429 0.000014 $ 27-Oct-2015 21:39:15.645 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.100000 68.440319 30.600000 0.183750 -100.000000 $ 27-Oct-2015 21:39:15.726 Init Mission Sending Optode Get All command $ 27-Oct-2015 21:39:15.806 Init Mission Normal state exit $ 27-Oct-2015 21:39:15.887 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.100000 68.440319 30.600000 0.183750 -100.000000 $ 27-Oct-2015 21:39:18.785 Init Profile State Entry $ 27-Oct-2015 21:39:18.318 Init Profile SBE41 Message -0.100000 -0.10 0.000313 0.000000 0.000044 -0.101429 0.000014 $ 27-Oct-2015 21:39:19.010 Init Profile Normal state exit $ 27-Oct-2015 21:39:19.015 Init Profile RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.100000 68.441312 30.600000 0.178750 -100.000000 $ 27-Oct-2015 21:39:21.846 Surface Ops Set Bellows State Entry $ 27-Oct-2015 21:39:21.851 Surface Ops Set Bellows Inflating bellows to Surface Ops position = 67.700000000000003 $ 27-Oct-2015 21:39:21.316 Surface Ops Set Bellows SBE41 Message -0.120000 -0.12 0.000601 0.006667 0.000050 -0.104286 0.000062 $ 27-Oct-2015 21:39:22.078 Surface Ops Set Bellows Normal state exit $ 27-Oct-2015 21:39:22.083 Surface Ops Set Bellows RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.120000 68.438927 30.600000 0.186250 -100.000000 $ 27-Oct-2015 21:39:24.915 Pre-Mission Delay State Entry $ 27-Oct-2015 21:39:24.314 Pre-Mission Delay SBE41 Message -0.100000 -0.10 0.000696 -0.006667 0.000052 -0.104286 0.000062 $ 27-Oct-2015 21:39:25.140 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.100000 68.439490 30.600000 0.186250 -100.000000 $ 27-Oct-2015 21:39:27.310 Pre-Mission Delay SBE41 Message -0.090000 -0.09 -0.000180 -0.003333 0.000018 -0.102857 0.000090 $ 27-Oct-2015 21:39:28.192 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.090000 68.439813 30.600000 0.175000 -100.000000 $ 27-Oct-2015 21:39:30.311 Pre-Mission Delay SBE41 Message -0.090000 -0.09 -0.001106 0.000000 -0.000065 -0.101429 0.000114 $ 27-Oct-2015 21:39:31.242 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.090000 68.439832 30.600000 0.176250 -100.000000 $ 27-Oct-2015 21:39:33.312 Pre-Mission Delay SBE41 Message -0.090000 -0.09 -0.001743 0.000000 -0.000164 -0.098571 0.000114 $ 27-Oct-2015 21:39:34.294 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.090000 68.439436 30.600000 0.176250 -100.000000 $ 27-Oct-2015 21:39:34.980 Pre-Mission Delay State timed out $ 27-Oct-2015 21:39:34.985 Surface Ops State Entry $ 27-Oct-2015 21:39:34.990 Surface Ops Optode Message -0.090000 Sending Optode Do Sample $ 27-Oct-2015 21:39:35.714 Surface Ops RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.090000 68.440718 30.600000 0.190000 -100.000000 $ 27-Oct-2015 21:39:36.318 Surface Ops SBE41 Message -0.090000 -0.09 -0.002127 0.000000 -0.000248 -0.097143 0.000124 $ 27-Oct-2015 21:39:36.491 Surface Ops Optode Message -0.090000 MEASUREMENT,4330,1996,*O2Concentration[uM],0.000,*AirSaturation[%],0.000,*Temperature[Deg.C],0.000,*CalPhase[Deg],0.000,*TCPhase[Deg],0.000,*C1RPh[Deg],0.000,*C2RPh[Deg],0.000,*C1Amp[mV],0.0,*C2Amp[mV],0.0,*RawTemp[mV],0.0 $ 27-Oct-2015 21:39:36.491 Surface Ops Optode Message -0.090000 # $ 27-Oct-2015 21:39:38.304 Surface Ops RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.090000 68.438745 30.600000 0.180000 -100.000000 $ 27-Oct-2015 21:39:39.314 Surface Ops SBE41 Message -0.110000 -0.11 -0.000805 0.006667 -0.000234 -0.098571 0.000148 $ 27-Oct-2015 21:39:41.358 Surface Ops RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.110000 68.439991 30.600000 0.180000 -100.000000 $ 27-Oct-2015 21:39:42.317 Surface Ops SBE41 Message -0.110000 -0.11 0.001309 0.000000 -0.000045 -0.097143 0.000090 $ 27-Oct-2015 21:39:44.407 Surface Ops RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.110000 68.439900 30.600000 0.172500 -100.000000 $ 27-Oct-2015 21:39:45.313 Surface Ops SBE41 Message -0.100000 -0.10 0.001935 -0.003333 0.000215 -0.097143 0.000090 $ 27-Oct-2015 21:39:47.478 Surface Ops RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.100000 68.438728 30.600000 0.175000 -100.000000 $ 27-Oct-2015 21:39:48.315 Surface Ops SBE41 Message -0.110000 -0.11 0.001731 0.003333 0.000378 -0.100000 0.000100 $ 27-Oct-2015 21:39:50.530 Surface Ops RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.110000 68.439865 30.600000 0.177500 -100.000000 $ 27-Oct-2015 21:39:51.316 Surface Ops SBE41 Message -0.100000 -0.10 0.000997 -0.003333 0.000363 -0.101429 0.000081 $ 27-Oct-2015 21:39:53.579 Surface Ops RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.100000 68.440006 30.600000 0.178750 -100.000000