$ Date Time State Comment Pressure Bel Pos Batt Volt CTD Temp CTD Sal LPS331 Press LPS311 Temp SHT21 Humid SHT21 Temp FLBB Topt Tphase Rphase NO3 pH LPF PVel Diff PVel LPF PAcc Press Avg Press Var PID SP PID PV PID Y1 PID Y2 PID I PID v PID u PID uCPS Batt Amps 12V Amps 3.3V Amps Debug GPS Irid Modem $ 27-Oct-2015 23:20:41.062 Init Mission Reset Controller Status Register Value = 65536 $ 27-Oct-2015 23:20:41.068 Init Mission File Name = \SD\2015-10-27T23-20-40 $ 27-Oct-2015 23:20:41.074 Init Mission Volume Total Size: 7939817472 $ 27-Oct-2015 23:20:41.080 Init Mission Volume Free Space: 7661649920 $ 27-Oct-2015 23:20:41.143 Init Mission PlatVel PID K = 80 $ 27-Oct-2015 23:20:41.223 Init Mission PlatVel PID Ti = 50000 $ 27-Oct-2015 23:20:41.304 Init Mission PlatVel PID Td = 10 $ 27-Oct-2015 23:20:41.385 Init Mission PlatVel PID Tf = 2 $ 27-Oct-2015 23:20:41.466 Init Mission PlatVel PID Tt = 100 $ 27-Oct-2015 23:20:41.547 Init Mission PlatVel PID B = 1 $ 27-Oct-2015 23:20:41.627 Init Mission PlatVel PID uLow = -50 $ 27-Oct-2015 23:20:41.708 Init Mission PlatVel PID uHigh = 50 $ 27-Oct-2015 23:20:41.789 Init Mission PlatVel PID h = 3 $ 27-Oct-2015 23:20:41.869 Init Mission Engr Logger Initialized $ 27-Oct-2015 23:20:44.956 Init Mission Sending CR/LF $ 27-Oct-2015 23:20:50.961 Init Mission Sending stopProfile $ 27-Oct-2015 23:20:50.966 Init Mission Sending pcutoff $ 27-Oct-2015 23:20:51.971 Init Mission Sending outputPTSyes $ 27-Oct-2015 23:20:52.977 Init Mission Sending tsWait $ 27-Oct-2015 23:20:53.982 Init Mission Reading Mission Configuration File $ 27-Oct-2015 23:20:53.988 Init Mission Recovery mode = True $ 27-Oct-2015 23:20:53.993 Init Mission Park Sample Period = 00:01:00 $ 27-Oct-2015 23:20:54.000 Init Mission Pressure table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:05:00, 7 $ 27-Oct-2015 23:20:54.008 Init Mission Ascend table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.070 Init Mission Ascend table 1 Pressure, PV, Park Time, sample list: 55, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.151 Init Mission Ascend table 2 Pressure, PV, Park Time, sample list: 50, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.232 Init Mission Ascend table 3 Pressure, PV, Park Time, sample list: 45, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.313 Init Mission Ascend table 4 Pressure, PV, Park Time, sample list: 40, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.394 Init Mission Ascend table 5 Pressure, PV, Park Time, sample list: 35, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.474 Init Mission Ascend table 6 Pressure, PV, Park Time, sample list: 30, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.555 Init Mission Ascend table 7 Pressure, PV, Park Time, sample list: 25, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.636 Init Mission Ascend table 8 Pressure, PV, Park Time, sample list: 20, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.717 Init Mission Ascend table 9 Pressure, PV, Park Time, sample list: 18, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.797 Init Mission Ascend table 10 Pressure, PV, Park Time, sample list: 16, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.878 Init Mission Ascend table 11 Pressure, PV, Park Time, sample list: 14, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:54.959 Init Mission Ascend table 12 Pressure, PV, Park Time, sample list: 12, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:55.040 Init Mission Ascend table 13 Pressure, PV, Park Time, sample list: 10, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:55.121 Init Mission Ascend table 14 Pressure, PV, Park Time, sample list: 8, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:55.201 Init Mission Ascend table 15 Pressure, PV, Park Time, sample list: 6, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:55.282 Init Mission Ascend table 16 Pressure, PV, Park Time, sample list: 4, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:55.363 Init Mission Ascend table 17 Pressure, PV, Park Time, sample list: 2, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:55.444 Init Mission Ascend table 18 Pressure, PV, Park Time, sample list: 0, 0.100, 00:00:00, 7 $ 27-Oct-2015 23:20:58.532 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 15 Num commas: 0 $ 27-Oct-2015 23:20:51.002 Init Mission Unparsed SBE41 Message S>stopprofile $ 27-Oct-2015 23:20:58.555 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 15 Num commas: 0 $ 27-Oct-2015 23:20:52.008 Init Mission Unparsed SBE41 Message S>outputpts=y $ 27-Oct-2015 23:20:58.577 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 12 Num commas: 0 $ 27-Oct-2015 23:20:53.004 Init Mission Unparsed SBE41 Message S>tswait=2 $ 27-Oct-2015 23:20:58.785 Init Mission PTH Message 1256.696045 25.283333 39.375824 25.608760 $ 27-Oct-2015 23:20:58.999 Init Mission State Entry $ 27-Oct-2015 23:20:59.004 Init Mission Bellows Position = 73.426 Battery Voltage = 30.48 and Current = 0.209 30.475000 0.208750 $ 27-Oct-2015 23:20:59.219 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 73.426183 30.475000 0.212500 -100.000000 $ 27-Oct-2015 23:21:02.049 Init Mission Initializing FLBB $ 27-Oct-2015 23:21:04.262 Init Mission FLBB Message NaN Sending FLBB stop command $ 27-Oct-2015 23:21:04.271 Init Mission FLBB Message NaN Sending FLBB pkt command: $pkt 2 $ 27-Oct-2015 23:21:04.282 Init Mission FLBB Message NaN $ 27-Oct-2015 23:21:04.291 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 27-Oct-2015 23:21:04.300 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 27-Oct-2015 23:21:04.352 Init Mission FLBB Message NaN Ave 3 $ 27-Oct-2015 23:21:04.432 Init Mission FLBB Message NaN Pkt 2 $ 27-Oct-2015 23:21:04.513 Init Mission FLBB Message NaN Sending FLBB ave command: $ave 3 $ 27-Oct-2015 23:21:04.594 Init Mission FLBB Message NaN $ 27-Oct-2015 23:21:04.675 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 27-Oct-2015 23:21:04.756 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 27-Oct-2015 23:21:04.836 Init Mission FLBB Message NaN Ave 3 $ 27-Oct-2015 23:21:04.917 Init Mission FLBB Message NaN Pkt 2 $ 27-Oct-2015 23:21:05.200 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 73.428063 30.475000 0.192500 -100.000000 $ 27-Oct-2015 23:21:05.214 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:05.720 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 73.428063 30.475000 0.192500 -100.000000 $ 27-Oct-2015 23:21:08.251 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:08.459 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 73.247579 30.425000 0.426250 -100.000000 $ 27-Oct-2015 23:21:11.290 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:11.497 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 73.038879 30.425000 0.418750 -100.000000 $ 27-Oct-2015 23:21:14.330 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:14.537 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 72.831835 30.425000 0.423750 -100.000000 $ 27-Oct-2015 23:21:17.368 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:17.576 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 72.615050 30.425000 0.427500 -100.000000 $ 27-Oct-2015 23:21:20.406 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:20.616 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 72.404592 30.425000 0.421250 -100.000000 $ 27-Oct-2015 23:21:23.446 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:23.654 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 72.187741 30.425000 0.432500 -100.000000 $ 27-Oct-2015 23:21:26.484 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:26.694 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 71.979411 30.425000 0.432500 -100.000000 $ 27-Oct-2015 23:21:29.525 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:29.732 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 71.770813 30.425000 0.417500 -100.000000 $ 27-Oct-2015 23:21:32.563 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:32.773 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 71.563259 30.425000 0.425000 -100.000000 $ 27-Oct-2015 23:21:35.603 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:35.811 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 71.354961 30.425000 0.425000 -100.000000 $ 27-Oct-2015 23:21:38.641 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:38.849 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 71.146391 30.425000 0.425000 -100.000000 $ 27-Oct-2015 23:21:41.682 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:41.889 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 70.941683 30.425000 0.421250 -100.000000 $ 27-Oct-2015 23:21:44.720 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:44.927 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 70.732619 30.425000 0.422500 -100.000000 $ 27-Oct-2015 23:21:47.760 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:47.968 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 70.525356 30.425000 0.413750 -100.000000 $ 27-Oct-2015 23:21:50.798 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:51.006 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 70.322076 30.425000 0.421250 -100.000000 $ 27-Oct-2015 23:21:53.839 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:54.046 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 70.111108 30.425000 0.426250 -100.000000 $ 27-Oct-2015 23:21:56.877 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:21:57.084 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 69.904392 30.425000 0.415000 -100.000000 $ 27-Oct-2015 23:21:59.917 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:22:00.007 Init Mission PTH Message 1255.815674 25.358333 39.345306 25.608760 $ 27-Oct-2015 23:22:00.221 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 69.688995 30.425000 0.441250 -100.000000 $ 27-Oct-2015 23:22:02.951 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:22:03.161 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 69.486446 30.425000 0.451250 -100.000000 $ 27-Oct-2015 23:22:05.991 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:22:06.199 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 69.277384 30.425000 0.440000 -100.000000 $ 27-Oct-2015 23:22:09.029 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:22:09.239 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 69.063883 30.425000 0.431250 -100.000000 $ 27-Oct-2015 23:22:12.069 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:22:12.277 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 68.856819 30.425000 0.458750 -100.000000 $ 27-Oct-2015 23:22:15.108 Init Mission Retracting bellows inside limits $ 27-Oct-2015 23:22:15.317 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 NaN 68.644877 30.425000 0.433750 -100.000000 $ 27-Oct-2015 23:22:18.148 Init Mission Bellows inside limits $ 27-Oct-2015 23:22:18.355 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.434773 30.475000 0.201250 -100.000000 $ 27-Oct-2015 23:22:21.687 Init Mission Extending Bellows 68.431929 $ 27-Oct-2015 23:22:22.899 Init Mission Extending Bellows 68.475190 $ 27-Oct-2015 23:22:24.109 Init Mission Extending Bellows 68.520354 $ 27-Oct-2015 23:22:25.320 Init Mission Extending Bellows 68.567691 $ 27-Oct-2015 23:22:26.530 Init Mission Extending Bellows 68.611862 $ 27-Oct-2015 23:22:27.740 Init Mission Extending Bellows 68.658521 $ 27-Oct-2015 23:22:28.952 Init Mission Extending Bellows 68.704380 $ 27-Oct-2015 23:22:30.162 Init Mission Extending Bellows 68.752932 $ 27-Oct-2015 23:22:31.372 Init Mission Extending Bellows 68.802878 $ 27-Oct-2015 23:22:32.582 Init Mission Extending Bellows 68.850121 $ 27-Oct-2015 23:22:34.294 Init Mission Retracting Bellows 68.900027 $ 27-Oct-2015 23:22:35.506 Init Mission Retracting Bellows 68.873100 $ 27-Oct-2015 23:22:36.716 Init Mission Retracting Bellows 68.837210 $ 27-Oct-2015 23:22:37.926 Init Mission Retracting Bellows 68.800302 $ 27-Oct-2015 23:22:39.136 Init Mission Retracting Bellows 68.760365 $ 27-Oct-2015 23:22:40.346 Init Mission Retracting Bellows 68.724327 $ 27-Oct-2015 23:22:41.559 Init Mission Retracting Bellows 68.685130 $ 27-Oct-2015 23:22:42.777 Init Mission Retracting Bellows 68.647044 $ 27-Oct-2015 23:22:43.987 Init Mission Retracting Bellows 68.605483 $ 27-Oct-2015 23:22:45.197 Init Mission Retracting Bellows 68.568414 $ 27-Oct-2015 23:22:48.430 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.525779 30.475000 0.188750 -100.000000 $ 27-Oct-2015 23:22:48.446 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:22:48.451 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.525779 30.475000 0.188750 -100.000000 $ 27-Oct-2015 23:22:51.483 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:22:51.494 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 21 Num commas: 0 $ 27-Oct-2015 23:22:48.739 Init Mission Unparsed SBE41 Message S>SBE 41CP UW V 2.0 $ 27-Oct-2015 23:22:51.512 Init Mission Looking for SBE 41: real-time output is P got: S>SBE 41CP UW V 2.0 $ 27-Oct-2015 23:22:51.733 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.526902 30.450000 0.203750 -100.000000 $ 27-Oct-2015 23:22:54.564 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:22:54.772 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.523863 30.475000 0.186250 -100.000000 $ 27-Oct-2015 23:22:57.605 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:22:57.812 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.526296 30.475000 0.191250 -100.000000 $ 27-Oct-2015 23:23:00.643 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:00.732 Init Mission PTH Message 1266.267822 25.325000 39.238495 25.640935 $ 27-Oct-2015 23:23:00.948 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.524010 30.475000 0.186250 -100.000000 $ 27-Oct-2015 23:23:03.678 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:03.886 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.527007 30.475000 0.187500 -100.000000 $ 27-Oct-2015 23:23:06.717 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:06.926 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.524495 30.475000 0.186250 -100.000000 $ 27-Oct-2015 23:23:09.757 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:09.964 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.523865 30.475000 0.186250 -100.000000 $ 27-Oct-2015 23:23:12.795 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:13.005 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.524471 30.475000 0.193750 -100.000000 $ 27-Oct-2015 23:23:15.835 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:16.043 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.523664 30.475000 0.186250 -100.000000 $ 27-Oct-2015 23:23:18.874 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:19.081 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.525917 30.475000 0.185000 -100.000000 $ 27-Oct-2015 23:23:21.914 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:22.122 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.525368 30.475000 0.186250 -100.000000 $ 27-Oct-2015 23:23:24.952 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:25.160 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.526248 30.475000 0.188750 -100.000000 $ 27-Oct-2015 23:23:27.993 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:28.200 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.524660 30.475000 0.195000 -100.000000 $ 27-Oct-2015 23:23:31.031 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:31.238 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.523295 30.450000 0.186250 -100.000000 $ 27-Oct-2015 23:23:34.071 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:34.285 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 27-Oct-2015 23:23:34.089 Init Mission Unparsed SBE41 Message S>ds $ 27-Oct-2015 23:23:34.301 Init Mission Looking for SBE 41: real-time output is P got: S>ds $ 27-Oct-2015 23:23:34.321 Init Mission Looking for SBE 41: real-time output is P got: SBE 41CP UW V 2.0 SERIAL NO. 4748 $ 27-Oct-2015 23:23:34.349 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 51 Num commas: 0 $ 27-Oct-2015 23:23:34.181 Init Mission Unparsed SBE41 Message firmware compilation date: 18 December 2007 09:20 $ 27-Oct-2015 23:23:34.453 Init Mission Looking for SBE 41: real-time output is P got: firmware compilation date: 18 December 2007 09:20 $ 27-Oct-2015 23:23:34.554 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 56 Num commas: 0 $ 27-Oct-2015 23:23:34.252 Init Mission Unparsed SBE41 Message stop profile when pressure is less than = 2.0 decibars $ 27-Oct-2015 23:23:34.696 Init Mission Looking for SBE 41: real-time output is P got: stop profile when pressure is less than = 2.0 decibars $ 27-Oct-2015 23:23:34.796 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 52 Num commas: 0 $ 27-Oct-2015 23:23:34.299 Init Mission Unparsed SBE41 Message automatic bin averaging at end of profile disabled $ 27-Oct-2015 23:23:34.938 Init Mission Looking for SBE 41: real-time output is P got: automatic bin averaging at end of profile disabled $ 27-Oct-2015 23:23:35.038 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 23:23:34.341 Init Mission Unparsed SBE41 Message number of samples = 127 $ 27-Oct-2015 23:23:35.180 Init Mission Looking for SBE 41: real-time output is P got: number of samples = 127 $ 27-Oct-2015 23:23:35.280 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 20 Num commas: 0 $ 27-Oct-2015 23:23:34.354 Init Mission Unparsed SBE41 Message number of bins = 0 $ 27-Oct-2015 23:23:35.423 Init Mission Looking for SBE 41: real-time output is P got: number of bins = 0 $ 27-Oct-2015 23:23:35.523 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 23:23:34.380 Init Mission Unparsed SBE41 Message top bin interval = 10 $ 27-Oct-2015 23:23:35.665 Init Mission Looking for SBE 41: real-time output is P got: top bin interval = 10 $ 27-Oct-2015 23:23:35.765 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 27-Oct-2015 23:23:34.410 Init Mission Unparsed SBE41 Message top bin size = 10 $ 27-Oct-2015 23:23:35.908 Init Mission Looking for SBE 41: real-time output is P got: top bin size = 10 $ 27-Oct-2015 23:23:36.008 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 27-Oct-2015 23:23:34.441 Init Mission Unparsed SBE41 Message top bin max = 100 $ 27-Oct-2015 23:23:36.150 Init Mission Looking for SBE 41: real-time output is P got: top bin max = 100 $ 27-Oct-2015 23:23:36.250 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 27-Oct-2015 23:23:34.481 Init Mission Unparsed SBE41 Message middle bin interval = 50 $ 27-Oct-2015 23:23:36.393 Init Mission Looking for SBE 41: real-time output is P got: middle bin interval = 50 $ 27-Oct-2015 23:23:36.493 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 22 Num commas: 0 $ 27-Oct-2015 23:23:34.511 Init Mission Unparsed SBE41 Message middle bin size = 50 $ 27-Oct-2015 23:23:36.635 Init Mission Looking for SBE 41: real-time output is P got: middle bin size = 50 $ 27-Oct-2015 23:23:36.937 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 23:23:34.552 Init Mission Unparsed SBE41 Message middle bin max = 1000 $ 27-Oct-2015 23:23:36.955 Init Mission Looking for SBE 41: real-time output is P got: middle bin max = 1000 $ 27-Oct-2015 23:23:36.986 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 27-Oct-2015 23:23:34.573 Init Mission Unparsed SBE41 Message bottom bin interval = 100 $ 27-Oct-2015 23:23:37.120 Init Mission Looking for SBE 41: real-time output is P got: bottom bin interval = 100 $ 27-Oct-2015 23:23:37.220 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 23:23:34.603 Init Mission Unparsed SBE41 Message bottom bin size = 100 $ 27-Oct-2015 23:23:37.362 Init Mission Looking for SBE 41: real-time output is P got: bottom bin size = 100 $ 27-Oct-2015 23:23:37.462 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 36 Num commas: 0 $ 27-Oct-2015 23:23:34.643 Init Mission Unparsed SBE41 Message do not include two transition bins $ 27-Oct-2015 23:23:37.605 Init Mission Looking for SBE 41: real-time output is P got: do not include two transition bins $ 27-Oct-2015 23:23:37.705 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 32 Num commas: 0 $ 27-Oct-2015 23:23:34.674 Init Mission Unparsed SBE41 Message do not include samples per bin $ 27-Oct-2015 23:23:37.847 Init Mission Looking for SBE 41: real-time output is P got: do not include samples per bin $ 27-Oct-2015 23:23:37.947 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 38 Num commas: 0 $ 27-Oct-2015 23:23:34.711 Init Mission Unparsed SBE41 Message pumped take sample wait time = 2 sec $ 27-Oct-2015 23:23:38.090 Init Mission Looking for SBE 41: real-time output is P got: pumped take sample wait time = 2 sec $ 27-Oct-2015 23:23:38.190 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 23:23:34.741 Init Mission Unparsed SBE41 Message real-time output is PTS $ 27-Oct-2015 23:23:38.332 Init Mission Looking for SBE 41: real-time output is P got: real-time output is PTS $ 27-Oct-2015 23:23:38.615 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.525762 30.475000 0.205000 -100.000000 $ 27-Oct-2015 23:23:38.631 Init Mission Sending SBE41 ds command $ 27-Oct-2015 23:23:38.636 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.525762 30.475000 0.205000 -100.000000 $ 27-Oct-2015 23:23:41.673 Init Mission Sending SBE41 dc command $ 27-Oct-2015 23:23:41.887 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 27-Oct-2015 23:23:41.688 Init Mission Unparsed SBE41 Message S>dc $ 27-Oct-2015 23:23:41.905 Init Mission Looking for SBE 41: POFFSET got: S>dc $ 27-Oct-2015 23:23:41.925 Init Mission Looking for SBE 41: POFFSET got: SBE 41CP UW V 2.0 SERIAL NO. 4748 $ 27-Oct-2015 23:23:41.951 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 23:23:41.770 Init Mission Unparsed SBE41 Message temperature: 09-oct-12 $ 27-Oct-2015 23:23:42.057 Init Mission Looking for SBE 41: POFFSET got: temperature: 09-oct-12 $ 27-Oct-2015 23:23:42.158 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 23:23:41.800 Init Mission Unparsed SBE41 Message TA0 = 3.212005e-05 $ 27-Oct-2015 23:23:42.300 Init Mission Looking for SBE 41: POFFSET got: TA0 = 3.212005e-05 $ 27-Oct-2015 23:23:42.400 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 23:23:41.831 Init Mission Unparsed SBE41 Message TA1 = 2.710063e-04 $ 27-Oct-2015 23:23:42.542 Init Mission Looking for SBE 41: POFFSET got: TA1 = 2.710063e-04 $ 27-Oct-2015 23:23:42.643 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 23:23:41.862 Init Mission Unparsed SBE41 Message TA2 = -2.206761e-06 $ 27-Oct-2015 23:23:42.784 Init Mission Looking for SBE 41: POFFSET got: TA2 = -2.206761e-06 $ 27-Oct-2015 23:23:42.885 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 27-Oct-2015 23:23:41.901 Init Mission Unparsed SBE41 Message TA3 = 1.436900e-07 $ 27-Oct-2015 23:23:43.027 Init Mission Looking for SBE 41: POFFSET got: TA3 = 1.436900e-07 $ 27-Oct-2015 23:23:43.127 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 27-Oct-2015 23:23:41.943 Init Mission Unparsed SBE41 Message conductivity: 09-oct-12 $ 27-Oct-2015 23:23:43.270 Init Mission Looking for SBE 41: POFFSET got: conductivity: 09-oct-12 $ 27-Oct-2015 23:23:43.369 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 23:23:41.956 Init Mission Unparsed SBE41 Message G = -9.713452e-01 $ 27-Oct-2015 23:23:43.512 Init Mission Looking for SBE 41: POFFSET got: G = -9.713452e-01 $ 27-Oct-2015 23:23:43.612 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 23:23:41.986 Init Mission Unparsed SBE41 Message H = 1.428729e-01 $ 27-Oct-2015 23:23:43.754 Init Mission Looking for SBE 41: POFFSET got: H = 1.428729e-01 $ 27-Oct-2015 23:23:43.854 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 27-Oct-2015 23:23:42.026 Init Mission Unparsed SBE41 Message I = -3.602926e-04 $ 27-Oct-2015 23:23:43.997 Init Mission Looking for SBE 41: POFFSET got: I = -3.602926e-04