$ Date Time State Comment Pressure Bel Pos Batt Volt CTD Temp CTD Sal LPS331 Press LPS311 Temp SHT21 Humid SHT21 Temp FLBB Topt Tphase Rphase NO3 pH LPF PVel Diff PVel LPF PAcc Press Avg Press Var PID SP PID PV PID Y1 PID Y2 PID I PID v PID u PID uCPS Batt Amps 12V Amps 3.3V Amps Debug GPS Irid Modem $ 28-Oct-2015 19:51:28.082 Init Mission Reset Controller Status Register Value = 65536 $ 28-Oct-2015 19:51:28.088 Init Mission File Name = \SD\2015-10-28T19-51-27 $ 28-Oct-2015 19:51:28.093 Init Mission Volume Total Size: 7939817472 $ 28-Oct-2015 19:51:28.100 Init Mission Volume Free Space: 7659945984 $ 28-Oct-2015 19:51:28.162 Init Mission PlatVel PID K = 80 $ 28-Oct-2015 19:51:28.242 Init Mission PlatVel PID Ti = 50000 $ 28-Oct-2015 19:51:28.323 Init Mission PlatVel PID Td = 10 $ 28-Oct-2015 19:51:28.404 Init Mission PlatVel PID Tf = 2 $ 28-Oct-2015 19:51:28.485 Init Mission PlatVel PID Tt = 100 $ 28-Oct-2015 19:51:28.565 Init Mission PlatVel PID B = 1 $ 28-Oct-2015 19:51:28.646 Init Mission PlatVel PID uLow = -50 $ 28-Oct-2015 19:51:28.727 Init Mission PlatVel PID uHigh = 50 $ 28-Oct-2015 19:51:28.808 Init Mission PlatVel PID h = 3 $ 28-Oct-2015 19:51:28.888 Init Mission Engr Logger Initialized $ 28-Oct-2015 19:51:40.556 Init Mission Sending CR/LF $ 28-Oct-2015 19:51:46.562 Init Mission Sending stopProfile $ 28-Oct-2015 19:51:46.567 Init Mission Sending pcutoff $ 28-Oct-2015 19:51:47.572 Init Mission Sending outputPTSyes $ 28-Oct-2015 19:51:48.578 Init Mission Sending tsWait $ 28-Oct-2015 19:51:49.583 Init Mission Reading Mission Configuration File $ 28-Oct-2015 19:51:49.590 Init Mission Recovery mode = True $ 28-Oct-2015 19:51:49.595 Init Mission Park Sample Period = 00:01:00 $ 28-Oct-2015 19:51:49.601 Init Mission Pressure table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:05:00, 7 $ 28-Oct-2015 19:51:49.609 Init Mission Ascend table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:49.672 Init Mission Ascend table 1 Pressure, PV, Park Time, sample list: 55, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:49.752 Init Mission Ascend table 2 Pressure, PV, Park Time, sample list: 50, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:49.833 Init Mission Ascend table 3 Pressure, PV, Park Time, sample list: 45, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:49.914 Init Mission Ascend table 4 Pressure, PV, Park Time, sample list: 40, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:49.995 Init Mission Ascend table 5 Pressure, PV, Park Time, sample list: 35, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.076 Init Mission Ascend table 6 Pressure, PV, Park Time, sample list: 30, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.156 Init Mission Ascend table 7 Pressure, PV, Park Time, sample list: 25, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.237 Init Mission Ascend table 8 Pressure, PV, Park Time, sample list: 20, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.318 Init Mission Ascend table 9 Pressure, PV, Park Time, sample list: 18, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.399 Init Mission Ascend table 10 Pressure, PV, Park Time, sample list: 16, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.480 Init Mission Ascend table 11 Pressure, PV, Park Time, sample list: 14, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.560 Init Mission Ascend table 12 Pressure, PV, Park Time, sample list: 12, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.641 Init Mission Ascend table 13 Pressure, PV, Park Time, sample list: 10, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.722 Init Mission Ascend table 14 Pressure, PV, Park Time, sample list: 8, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.803 Init Mission Ascend table 15 Pressure, PV, Park Time, sample list: 6, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.884 Init Mission Ascend table 16 Pressure, PV, Park Time, sample list: 4, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:50.964 Init Mission Ascend table 17 Pressure, PV, Park Time, sample list: 2, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:51.045 Init Mission Ascend table 18 Pressure, PV, Park Time, sample list: 0, 0.100, 00:00:00, 7 $ 28-Oct-2015 19:51:54.135 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 15 Num commas: 0 $ 28-Oct-2015 19:51:46.603 Init Mission Unparsed SBE41 Message S>stopprofile $ 28-Oct-2015 19:51:54.158 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 15 Num commas: 0 $ 28-Oct-2015 19:51:47.609 Init Mission Unparsed SBE41 Message S>outputpts=y $ 28-Oct-2015 19:51:54.180 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 12 Num commas: 0 $ 28-Oct-2015 19:51:48.605 Init Mission Unparsed SBE41 Message S>tswait=2 $ 28-Oct-2015 19:51:54.389 Init Mission PTH Message 1256.259277 24.575000 18.753571 25.008154 $ 28-Oct-2015 19:51:54.603 Init Mission State Entry $ 28-Oct-2015 19:51:54.607 Init Mission Bellows Position = 68.709 Battery Voltage = 32.88 and Current = 0.182 32.875000 0.182500 $ 28-Oct-2015 19:51:54.822 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.708577 32.875000 0.182500 -100.000000 $ 28-Oct-2015 19:51:57.652 Init Mission Initializing FLBB $ 28-Oct-2015 19:51:59.865 Init Mission FLBB Message NaN Sending FLBB stop command $ 28-Oct-2015 19:51:59.874 Init Mission FLBB Message NaN Sending FLBB pkt command: $pkt 2 $ 28-Oct-2015 19:51:59.885 Init Mission FLBB Message NaN $ 28-Oct-2015 19:51:59.894 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 28-Oct-2015 19:51:59.904 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 28-Oct-2015 19:51:59.955 Init Mission FLBB Message NaN Ave 3 $ 28-Oct-2015 19:52:00.036 Init Mission FLBB Message NaN Pkt 2 $ 28-Oct-2015 19:52:00.117 Init Mission FLBB Message NaN Sending FLBB ave command: $ave 3 $ 28-Oct-2015 19:52:00.198 Init Mission FLBB Message NaN $ 28-Oct-2015 19:52:00.278 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 28-Oct-2015 19:52:00.359 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 28-Oct-2015 19:52:00.440 Init Mission FLBB Message NaN Ave 3 $ 28-Oct-2015 19:52:00.521 Init Mission FLBB Message NaN Pkt 2 $ 28-Oct-2015 19:52:00.804 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.708687 32.875000 0.205000 -100.000000 $ 28-Oct-2015 19:52:00.817 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.708687 32.875000 0.205000 -100.000000 $ 28-Oct-2015 19:52:03.850 Init Mission Retracting bellows inside limits $ 28-Oct-2015 19:52:01.251 Init Mission SBE41 Message -0.030000 -0.03 0.000000 0.000000 -0.000000 -0.030000 0.000000 $ 28-Oct-2015 19:52:04.577 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 -0.030000 68.706131 32.825000 0.420000 -100.000000 $ 28-Oct-2015 19:52:06.905 Init Mission Retracting bellows inside limits $ 28-Oct-2015 19:52:07.112 Init Mission RecMode true, PID Off, Ret'g, Scend sub: , depthNum = 0 -0.030000 68.547267 32.825000 0.416250 -100.000000 $ 28-Oct-2015 19:52:09.946 Init Mission Bellows inside limits $ 28-Oct-2015 19:52:10.153 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.337947 32.875000 0.177500 -100.000000 $ 28-Oct-2015 19:52:13.486 Init Mission Extending Bellows 68.332934 $ 28-Oct-2015 19:52:14.695 Init Mission Extending Bellows 68.370907 $ 28-Oct-2015 19:52:15.908 Init Mission Extending Bellows 68.416322 $ 28-Oct-2015 19:52:17.118 Init Mission Extending Bellows 68.465663 $ 28-Oct-2015 19:52:18.421 Init Mission Extending Bellows 68.516293 $ 28-Oct-2015 19:52:19.817 Init Mission Extending Bellows 68.571208 $ 28-Oct-2015 19:52:21.212 Init Mission Extending Bellows 68.624058 $ 28-Oct-2015 19:52:22.609 Init Mission Extending Bellows 68.679338 $ 28-Oct-2015 19:52:24.005 Init Mission Extending Bellows 68.735660 $ 28-Oct-2015 19:52:25.400 Init Mission Extending Bellows 68.791890 $ 28-Oct-2015 19:52:27.297 Init Mission Retracting Bellows 68.849948 $ 28-Oct-2015 19:52:28.692 Init Mission Retracting Bellows 68.807589 $ 28-Oct-2015 19:52:30.090 Init Mission Retracting Bellows 68.756035 $ 28-Oct-2015 19:52:31.485 Init Mission Retracting Bellows 68.707422 $ 28-Oct-2015 19:52:32.881 Init Mission Retracting Bellows 68.655824 $ 28-Oct-2015 19:52:34.277 Init Mission Retracting Bellows 68.609001 $ 28-Oct-2015 19:52:35.672 Init Mission Retracting Bellows 68.559025 $ 28-Oct-2015 19:52:37.070 Init Mission Retracting Bellows 68.507916 $ 28-Oct-2015 19:52:38.465 Init Mission Retracting Bellows 68.456398 $ 28-Oct-2015 19:52:39.860 Init Mission Retracting Bellows 68.401825 $ 28-Oct-2015 19:52:43.481 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.350807 32.875000 0.170000 -100.000000 $ 28-Oct-2015 19:52:43.682 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.350807 32.875000 0.170000 -100.000000 $ 28-Oct-2015 19:52:46.699 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:52:47.021 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 28-Oct-2015 19:52:46.811 Init Mission Unparsed SBE41 Message S>ds $ 28-Oct-2015 19:52:47.448 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 51 Num commas: 0 $ 28-Oct-2015 19:52:46.903 Init Mission Unparsed SBE41 Message firmware compilation date: 18 December 2007 09:20 $ 28-Oct-2015 19:52:47.857 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 56 Num commas: 0 $ 28-Oct-2015 19:52:46.974 Init Mission Unparsed SBE41 Message stop profile when pressure is less than = 2.0 decibars $ 28-Oct-2015 19:52:48.265 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 52 Num commas: 0 $ 28-Oct-2015 19:52:47.213 Init Mission Unparsed SBE41 Message automatic bin averaging at end of profile disabled $ 28-Oct-2015 19:52:48.671 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:47.213 Init Mission Unparsed SBE41 Message number of samples = 287 $ 28-Oct-2015 19:52:49.078 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 20 Num commas: 0 $ 28-Oct-2015 19:52:47.214 Init Mission Unparsed SBE41 Message number of bins = 0 $ 28-Oct-2015 19:52:49.483 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:52:47.214 Init Mission Unparsed SBE41 Message top bin interval = 10 $ 28-Oct-2015 19:52:49.890 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 28-Oct-2015 19:52:47.215 Init Mission Unparsed SBE41 Message top bin size = 10 $ 28-Oct-2015 19:52:50.295 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 28-Oct-2015 19:52:47.215 Init Mission Unparsed SBE41 Message top bin max = 100 $ 28-Oct-2015 19:52:50.702 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 28-Oct-2015 19:52:47.216 Init Mission Unparsed SBE41 Message middle bin interval = 50 $ 28-Oct-2015 19:52:51.107 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 22 Num commas: 0 $ 28-Oct-2015 19:52:47.411 Init Mission Unparsed SBE41 Message middle bin size = 50 $ 28-Oct-2015 19:52:51.515 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:52:47.411 Init Mission Unparsed SBE41 Message middle bin max = 1000 $ 28-Oct-2015 19:52:51.925 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:47.412 Init Mission Unparsed SBE41 Message bottom bin interval = 100 $ 28-Oct-2015 19:52:52.332 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:52:47.412 Init Mission Unparsed SBE41 Message bottom bin size = 100 $ 28-Oct-2015 19:52:52.737 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 36 Num commas: 0 $ 28-Oct-2015 19:52:47.413 Init Mission Unparsed SBE41 Message do not include two transition bins $ 28-Oct-2015 19:52:53.145 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 32 Num commas: 0 $ 28-Oct-2015 19:52:47.414 Init Mission Unparsed SBE41 Message do not include samples per bin $ 28-Oct-2015 19:52:53.550 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 38 Num commas: 0 $ 28-Oct-2015 19:52:47.435 Init Mission Unparsed SBE41 Message pumped take sample wait time = 2 sec $ 28-Oct-2015 19:52:53.957 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:47.643 Init Mission Unparsed SBE41 Message real-time output is PTS $ 28-Oct-2015 19:52:54.834 Init Mission PTH Message 1257.632080 24.725000 18.715424 25.008154 $ 28-Oct-2015 19:52:55.239 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.349939 32.875000 0.171250 -100.000000 $ 28-Oct-2015 19:52:55.438 Init Mission Sending SBE41 ds command $ 28-Oct-2015 19:52:55.536 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.349939 32.875000 0.171250 -100.000000 $ 28-Oct-2015 19:52:58.452 Init Mission Sending SBE41 dc command $ 28-Oct-2015 19:52:58.760 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 28-Oct-2015 19:52:58.560 Init Mission Unparsed SBE41 Message S>dc $ 28-Oct-2015 19:52:59.189 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:58.642 Init Mission Unparsed SBE41 Message temperature: 09-oct-12 $ 28-Oct-2015 19:52:59.602 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:58.672 Init Mission Unparsed SBE41 Message TA0 = 3.212005e-05 $ 28-Oct-2015 19:53:00.009 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:58.703 Init Mission Unparsed SBE41 Message TA1 = 2.710063e-04 $ 28-Oct-2015 19:53:00.415 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:58.734 Init Mission Unparsed SBE41 Message TA2 = -2.206761e-06 $ 28-Oct-2015 19:53:00.822 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:58.954 Init Mission Unparsed SBE41 Message TA3 = 1.436900e-07 $ 28-Oct-2015 19:53:01.227 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 28-Oct-2015 19:52:58.955 Init Mission Unparsed SBE41 Message conductivity: 09-oct-12 $ 28-Oct-2015 19:53:01.635 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:52:58.955 Init Mission Unparsed SBE41 Message G = -9.713452e-01 $ 28-Oct-2015 19:53:02.040 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:52:58.956 Init Mission Unparsed SBE41 Message H = 1.428729e-01 $ 28-Oct-2015 19:53:02.447 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:52:58.956 Init Mission Unparsed SBE41 Message I = -3.602926e-04 $ 28-Oct-2015 19:53:02.853 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 28-Oct-2015 19:52:58.957 Init Mission Unparsed SBE41 Message J = 4.629943e-05 $ 28-Oct-2015 19:53:03.266 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.151 Init Mission Unparsed SBE41 Message CPCOR = -9.570001e-08 $ 28-Oct-2015 19:53:03.679 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.152 Init Mission Unparsed SBE41 Message CTCOR = 3.250000e-06 $ 28-Oct-2015 19:53:04.090 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.153 Init Mission Unparsed SBE41 Message WBOTC = -8.290229e-07 $ 28-Oct-2015 19:53:04.497 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 55 Num commas: 1 $ 28-Oct-2015 19:52:59.154 Init Mission Unparsed SBE41 Message pressure S/N = 3588090, range = 2900 psia: 04-oct-12 $ 28-Oct-2015 19:53:04.903 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:59.154 Init Mission Unparsed SBE41 Message PA0 = 9.502019e-02 $ 28-Oct-2015 19:53:05.311 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:59.176 Init Mission Unparsed SBE41 Message PA1 = 1.398889e-01 $ 28-Oct-2015 19:53:05.716 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 28-Oct-2015 19:52:59.381 Init Mission Unparsed SBE41 Message PA2 = -4.043459e-08 $ 28-Oct-2015 19:53:06.129 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.382 Init Mission Unparsed SBE41 Message PTCA0 = 4.041972e+01 $ 28-Oct-2015 19:53:06.540 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.382 Init Mission Unparsed SBE41 Message PTCA1 = -2.065459e-04 $ 28-Oct-2015 19:53:06.953 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.383 Init Mission Unparsed SBE41 Message PTCA2 = 1.354759e-03 $ 28-Oct-2015 19:53:07.364 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.384 Init Mission Unparsed SBE41 Message PTCB0 = 2.527550e+01 $ 28-Oct-2015 19:53:07.777 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.384 Init Mission Unparsed SBE41 Message PTCB1 = 1.100000e-03 $ 28-Oct-2015 19:53:08.188 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.579 Init Mission Unparsed SBE41 Message PTCB2 = 0.000000e+00 $ 28-Oct-2015 19:53:08.601 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.580 Init Mission Unparsed SBE41 Message PTHA0 = -6.951193e+01 $ 28-Oct-2015 19:53:09.012 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.581 Init Mission Unparsed SBE41 Message PTHA1 = 5.247121e-02 $ 28-Oct-2015 19:53:09.425 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 28-Oct-2015 19:52:59.581 Init Mission Unparsed SBE41 Message PTHA2 = -6.547758e-07 $ 28-Oct-2015 19:53:09.836 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 29 Num commas: 0 $ 28-Oct-2015 19:52:59.582 Init Mission Unparsed SBE41 Message POFFSET = 0.000000e+00 $ 28-Oct-2015 19:53:11.034 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.348360 32.875000 0.172500 -100.000000 $ 28-Oct-2015 19:53:11.233 Init Mission Sending SBE41 dc command $ 28-Oct-2015 19:53:11.331 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.348360 32.875000 0.172500 -100.000000 $ 28-Oct-2015 19:53:14.454 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.349562 32.875000 0.172500 -100.000000 $ 28-Oct-2015 19:53:17.269 Init Mission Sending Optode Get All command $ 28-Oct-2015 19:53:15.192 Init Mission SBE41 Message -0.040000 -0.04 0.000301 0.003333 0.000009 -0.031429 0.000014 $ 28-Oct-2015 19:53:17.937 Init Mission Optode Message -0.040000 !%!Product Name,4330,1996,Optode Sensor $ 28-Oct-2015 19:53:17.968 Init Mission Optode Message -0.040000 Product Number,4330,1996,4330 $ 28-Oct-2015 19:53:17.998 Init Mission Optode Message -0.040000 Serial Number,4330,1996,1996 $ 28-Oct-2015 19:53:18.019 Init Mission Optode Message -0.040000 SW ID,4330,1996,1940006 $ 28-Oct-2015 19:53:18.049 Init Mission Optode Message -0.040000 SW Version,4330,1996,4,8,1 $ 28-Oct-2015 19:53:18.273 Init Mission SBE41 Message 0.150000 0.15 -0.004906 -0.063333 -0.000132 -0.005714 0.004729 $ 28-Oct-2015 19:53:18.273 Init Mission Optode Message 0.150000 Node Description,4330,1996,Optode Sensor #1996 $ 28-Oct-2015 19:53:18.274 Init Mission Optode Message 0.150000 Owner,4330,1996, $ 28-Oct-2015 19:53:18.274 Init Mission Optode Message 0.150000 Salinity[PSU],4330,1996,0.00 $ 28-Oct-2015 19:53:18.275 Init Mission Optode Message 0.150000 PhaseCoef,4330,1996,-1.360000E+00,1.000000E+00,0.000000E+00,0.000000E+00 $ 28-Oct-2015 19:53:18.276 Init Mission Optode Message 0.150000 FoilID,4330,1996,1206E $ 28-Oct-2015 19:53:18.485 Init Mission Optode Message 0.150000 FoilCoefA,4330,1996,-2.988314E-06,-6.137785E-06,1.684659E-03,-1.857173E-01,6.784399E-04,-5.597908E-07,1.040158E+01,-5.986907E-02,1.360425E-04,-4.776977E-07,-3.032937E+02,2.530496E+00,-1.267045E-02,1.040454E-04 $ 28-Oct-2015 19:53:18.704 Init Mission Optode Message 0.150000 FoilCoefB,4330,1996,-3.560390E-07,3.816713E+03,-4.475507E+01,4.386163E-01,-7.146342E-03,8.906235E-05,-6.343012E-07,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00 $ 28-Oct-2015 19:53:18.705 Init Mission Optode Message 0.150000 FoilPolyDegT,4330,1996,1,0,0,0,1,2,0,1,2,3,0,1,2,3,4,0,1,2,3,4,5,0,0,0,0,0,0,0 $ 28-Oct-2015 19:53:18.923 Init Mission Optode Message 0.150000 FoilPolyDegO,4330,1996,4,5,4,3,3,3,2,2,2,2,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0 $ 28-Oct-2015 19:53:18.924 Init Mission Optode Message 0.150000 SVUFoilCoef,4330,1996,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00 $ 28-Oct-2015 19:53:18.946 Init Mission Optode Message 0.150000 ConcCoef,4330,1996,-1.446043E+00,9.675803E-01 $ 28-Oct-2015 19:53:19.142 Init Mission Optode Message 0.150000 NomAirPress[hPa],4330,1996,1013.25 $ 28-Oct-2015 19:53:19.143 Init Mission Optode Message 0.150000 NomAirMix,4330,1996,0.20946 $ 28-Oct-2015 19:53:19.144 Init Mission Optode Message 0.150000 CalDataSat[Deg],4330,1996,32.69,9.89 $ 28-Oct-2015 19:53:19.144 Init Mission Optode Message 0.150000 CalDataAPress[hPa],4330,1996,936.496 $ 28-Oct-2015 19:53:19.145 Init Mission Optode Message 0.150000 CalDataZero[Deg],4330,1996,62.974,21.484 $ 28-Oct-2015 19:53:19.145 Init Mission Optode Message 0.150000 Mode,4330,1996,AiCaP $ 28-Oct-2015 19:53:19.166 Init Mission Optode Message 0.150000 Enable Sleep,4330,1996,Yes $ 28-Oct-2015 19:53:19.366 Init Mission Optode Message 0.150000 Enable Polled Mode,4330,1996,No $ 28-Oct-2015 19:53:19.366 Init Mission Optode Message 0.150000 Enable Text,4330,1996,Yes $ 28-Oct-2015 19:53:19.367 Init Mission Optode Message 0.150000 Enable Decimalformat,4330,1996,Yes $ 28-Oct-2015 19:53:19.368 Init Mission Optode Message 0.150000 Analog TempLimit[Deg.C],4330,1996,-5.00,35.00 $ 28-Oct-2015 19:53:19.369 Init Mission Optode Message 0.150000 Analog ConcLimit[Deg.C],4330,1996,0.00,800.00 $ 28-Oct-2015 19:53:19.383 Init Mission Optode Message 0.150000 Analog SatLimit[Deg.C],4330,1996,0.00,200.00 $ 28-Oct-2015 19:53:19.423 Init Mission Optode Message 0.150000 Analog PhaseLimit[Deg.C],4330,1996,10.00,70.00 $ 28-Oct-2015 19:53:19.464 Init Mission Optode Message 0.150000 Analog Output,4330,1996,O2Concentration $ 28-Oct-2015 19:53:19.515 Init Mission Optode Message 0.150000 Analog1 Coef,4330,1996,0.000000E+00,1.000000E+00 $ 28-Oct-2015 19:53:19.556 Init Mission Optode Message 0.150000 Analog2 Coef,4330,1996,0.000000E+00,1.000000E+00 $ 28-Oct-2015 19:53:19.787 Init Mission Optode Message 0.150000 Enable AirSaturation,4330,1996,Yes $ 28-Oct-2015 19:53:19.787 Init Mission Optode Message 0.150000 Enable Rawdata,4330,1996,Yes $ 28-Oct-2015 19:53:19.788 Init Mission Optode Message 0.150000 Enable Temperature,4330,1996,Yes $ 28-Oct-2015 19:53:19.789 Init Mission Optode Message 0.150000 Enable HumidityComp,4330,1996,Yes $ 28-Oct-2015 19:53:19.789 Init Mission Optode Message 0.150000 Enable SVUformula,4330,1996,No $ 28-Oct-2015 19:53:19.790 Init Mission Optode Message 0.150000 Interval[s],4330,1996,30.000 $ 28-Oct-2015 19:53:19.790 Init Mission Optode Message 0.150000 Location,4330,1996, $ 28-Oct-2015 19:53:19.995 Init Mission Optode Message 0.150000 Geographic Position,4330,1996,60.323605,5.37225 $ 28-Oct-2015 19:53:19.995 Init Mission Optode Message 0.150000 Vertical Position,4330,1996, $ 28-Oct-2015 19:53:19.995 Init Mission Optode Message 0.150000 Reference,4330,1996, $ 28-Oct-2015 19:53:19.996 Init Mission Optode Message 0.150000 # $ 28-Oct-2015 19:53:21.489 Init Mission SBE41 Message 4.340000 4.34 -0.140116 -1.396667 -0.004450 0.618571 2.697481 $ 28-Oct-2015 19:53:24.213 Init Mission SBE41 Message -3.430000 -3.43 -0.123873 2.590000 -0.010945 0.132857 5.083957 $ 28-Oct-2015 19:53:27.246 Init Mission Unparsed SBE41 Message -5.23 $ 28-Oct-2015 19:53:29.762 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -3.430000 68.348642 32.875000 0.171250 -100.000000 $ 28-Oct-2015 19:53:29.987 Init Mission Sending Optode Get All command $ 28-Oct-2015 19:53:30.086 Init Mission Normal state exit $ 28-Oct-2015 19:53:30.184 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -3.430000 68.348642 32.875000 0.171250 -100.000000 $ 28-Oct-2015 19:53:33.003 Init Profile State Entry $ 28-Oct-2015 19:53:33.102 Init Profile Resetting SBE41 with qs $ 28-Oct-2015 19:53:34.201 Init Profile Synching system time to GPS $ 28-Oct-2015 19:53:30.386 Init Profile SBE41 Message 0.760000 0.76 0.010779 -1.396667 -0.010316 0.245714 5.130229 $ 28-Oct-2015 19:53:33.200 Init Profile SBE41 Message 1.800000 1.80 0.016604 -0.346667 -0.002693 0.507143 5.440457 $ 28-Oct-2015 19:53:47.809 Init Profile Normal state exit $ 28-Oct-2015 19:53:47.907 Init Profile RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.800000 68.349165 32.875000 0.168750 -100.000000 $ 28-Oct-2015 19:53:48.107 Surface Ops Set Bellows State Entry $ 28-Oct-2015 19:53:48.207 Surface Ops Set Bellows Inflating bellows to Surface Ops position = 67.700000000000003 $ 28-Oct-2015 19:53:48.604 Surface Ops Set Bellows Normal state exit $ 28-Oct-2015 19:53:48.702 Surface Ops Set Bellows RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.800000 68.348676 32.875000 0.175000 -100.000000 $ 28-Oct-2015 19:53:51.115 Pre-Mission Delay State Entry $ 28-Oct-2015 19:53:51.221 Pre-Mission Delay SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 4 Num commas: 0 $ 28-Oct-2015 19:53:48.912 Pre-Mission Delay Unparsed SBE41 Message S> $ 28-Oct-2015 19:53:51.214 Pre-Mission Delay SBE41 Message 0.910000 0.91 0.000177 0.296667 0.005801 0.641429 5.398381 $ 28-Oct-2015 19:53:52.018 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 0.910000 68.349263 32.875000 0.173750 -100.000000 $ 28-Oct-2015 19:53:54.130 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 0.910000 68.349263 32.875000 0.173750 -100.000000 $ 28-Oct-2015 19:53:54.331 Pre-Mission Delay SBE41 Message 0.220000 0.22 0.007350 0.230000 0.011839 0.678571 5.348981 $ 28-Oct-2015 19:53:57.350 Pre-Mission Delay SBE41 Message -0.030000 -0.03 -0.057460 0.083333 0.008772 0.652857 5.385324 $ 28-Oct-2015 19:53:57.956 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.030000 68.348928 32.875000 0.177500 -100.000000 $ 28-Oct-2015 19:54:00.201 Pre-Mission Delay SBE41 Message -0.040000 -0.04 -0.012629 0.003333 -0.000388 0.027143 2.742724 $ 28-Oct-2015 19:54:00.574 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.040000 68.349243 32.875000 0.168750 -100.000000