$ Date Time State Comment Pressure Bel Pos Batt Volt CTD Temp CTD Sal LPS331 Press LPS311 Temp SHT21 Humid SHT21 Temp FLBB Topt Tphase Rphase NO3 pH LPF PVel Diff PVel LPF PAcc Press Avg Press Var PID SP PID PV PID Y1 PID Y2 PID I PID v PID u PID uCPS Batt Amps 12V Amps 3.3V Amps Debug GPS Irid Modem $ 29-Oct-2015 16:35:13.991 Init Mission Reset Controller Status Register Value = 65537 $ 29-Oct-2015 16:35:13.997 Init Mission File Name = \SD\2015-10-29T16-35-12 $ 29-Oct-2015 16:35:14.002 Init Mission Volume Total Size: 7939817472 $ 29-Oct-2015 16:35:14.008 Init Mission Volume Free Space: 7659847680 $ 29-Oct-2015 16:35:14.071 Init Mission PlatVel PID K = 80 $ 29-Oct-2015 16:35:14.152 Init Mission PlatVel PID Ti = 50000 $ 29-Oct-2015 16:35:14.232 Init Mission PlatVel PID Td = 10 $ 29-Oct-2015 16:35:14.313 Init Mission PlatVel PID Tf = 2 $ 29-Oct-2015 16:35:14.394 Init Mission PlatVel PID Tt = 100 $ 29-Oct-2015 16:35:14.475 Init Mission PlatVel PID B = 1 $ 29-Oct-2015 16:35:14.556 Init Mission PlatVel PID uLow = -50 $ 29-Oct-2015 16:35:14.636 Init Mission PlatVel PID uHigh = 50 $ 29-Oct-2015 16:35:14.717 Init Mission PlatVel PID h = 3 $ 29-Oct-2015 16:35:14.798 Init Mission Engr Logger Initialized $ 29-Oct-2015 16:35:17.883 Init Mission Sending CR/LF $ 29-Oct-2015 16:35:23.889 Init Mission Sending stopProfile $ 29-Oct-2015 16:35:23.894 Init Mission Sending pcutoff $ 29-Oct-2015 16:35:24.899 Init Mission Sending outputPTSyes $ 29-Oct-2015 16:35:25.904 Init Mission Sending tsWait $ 29-Oct-2015 16:35:26.910 Init Mission Reading Mission Configuration File $ 29-Oct-2015 16:35:26.916 Init Mission Recovery mode = True $ 29-Oct-2015 16:35:26.921 Init Mission Park Sample Period = 00:01:00 $ 29-Oct-2015 16:35:26.928 Init Mission Pressure table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:05:00, 7 $ 29-Oct-2015 16:35:26.936 Init Mission Ascend table 0 Pressure, PV, Park Time, sample list: 60, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:26.998 Init Mission Ascend table 1 Pressure, PV, Park Time, sample list: 55, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.080 Init Mission Ascend table 2 Pressure, PV, Park Time, sample list: 50, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.160 Init Mission Ascend table 3 Pressure, PV, Park Time, sample list: 45, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.241 Init Mission Ascend table 4 Pressure, PV, Park Time, sample list: 40, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.322 Init Mission Ascend table 5 Pressure, PV, Park Time, sample list: 35, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.403 Init Mission Ascend table 6 Pressure, PV, Park Time, sample list: 30, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.483 Init Mission Ascend table 7 Pressure, PV, Park Time, sample list: 25, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.564 Init Mission Ascend table 8 Pressure, PV, Park Time, sample list: 20, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.645 Init Mission Ascend table 9 Pressure, PV, Park Time, sample list: 18, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.726 Init Mission Ascend table 10 Pressure, PV, Park Time, sample list: 16, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.806 Init Mission Ascend table 11 Pressure, PV, Park Time, sample list: 14, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.887 Init Mission Ascend table 12 Pressure, PV, Park Time, sample list: 12, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:27.968 Init Mission Ascend table 13 Pressure, PV, Park Time, sample list: 10, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:28.049 Init Mission Ascend table 14 Pressure, PV, Park Time, sample list: 8, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:28.130 Init Mission Ascend table 15 Pressure, PV, Park Time, sample list: 6, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:28.210 Init Mission Ascend table 16 Pressure, PV, Park Time, sample list: 4, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:28.291 Init Mission Ascend table 17 Pressure, PV, Park Time, sample list: 2, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:28.373 Init Mission Ascend table 18 Pressure, PV, Park Time, sample list: 0, 0.100, 00:00:00, 7 $ 29-Oct-2015 16:35:14.888 Init Mission A3LA Message AT&D0 $ 29-Oct-2015 16:35:14.888 Init Mission A3LA Message OK $ 29-Oct-2015 16:35:15.894 Init Mission A3LA Message AT&K0 $ 29-Oct-2015 16:35:15.895 Init Mission A3LA Message OK $ 29-Oct-2015 16:35:16.911 Init Mission A3LA Message AT+SBDD2 $ 29-Oct-2015 16:35:16.911 Init Mission A3LA Message 0 $ 29-Oct-2015 16:35:16.911 Init Mission A3LA Message $ 29-Oct-2015 16:35:16.912 Init Mission A3LA Message OK $ 29-Oct-2015 16:35:31.795 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 13 Num commas: 0 $ 29-Oct-2015 16:35:23.920 Init Mission Unparsed SBE41 Message S>stopprofi $ 29-Oct-2015 16:35:31.956 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 15 Num commas: 0 $ 29-Oct-2015 16:35:24.936 Init Mission Unparsed SBE41 Message S>outputpts=y $ 29-Oct-2015 16:35:32.118 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 12 Num commas: 0 $ 29-Oct-2015 16:35:25.932 Init Mission Unparsed SBE41 Message S>tswait=2 $ 29-Oct-2015 16:35:32.357 Init Mission PTH Message 1223.725830 24.175000 20.424408 24.375374 $ 29-Oct-2015 16:35:32.572 Init Mission State Entry $ 29-Oct-2015 16:35:32.577 Init Mission Bellows Position = 68.391 Battery Voltage = 32.75 and Current = 0.213 32.750000 0.212500 $ 29-Oct-2015 16:35:32.790 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.391566 32.750000 0.212500 -100.000000 $ 29-Oct-2015 16:35:35.621 Init Mission Initializing FLBB $ 29-Oct-2015 16:35:38.440 Init Mission FLBB Message NaN Sending FLBB stop command $ 29-Oct-2015 16:35:38.449 Init Mission FLBB Message NaN $ 29-Oct-2015 16:35:38.458 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 29-Oct-2015 16:35:38.467 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 29-Oct-2015 16:35:38.476 Init Mission FLBB Message NaN Ave 30 $ 29-Oct-2015 16:35:38.529 Init Mission FLBB Message NaN Pkt 0 $ 29-Oct-2015 16:35:38.610 Init Mission FLBB Message NaN Sending FLBB pkt command: $pkt 2 $ 29-Oct-2015 16:35:38.691 Init Mission FLBB Message NaN $ 29-Oct-2015 16:35:38.772 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 29-Oct-2015 16:35:38.852 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 29-Oct-2015 16:35:38.933 Init Mission FLBB Message NaN Ave 30 $ 29-Oct-2015 16:35:39.014 Init Mission FLBB Message NaN Pkt 2 $ 29-Oct-2015 16:35:39.297 Init Mission FLBB Message NaN Sending FLBB ave command: $ave 3 $ 29-Oct-2015 16:35:39.307 Init Mission FLBB Message NaN $ 29-Oct-2015 16:35:39.316 Init Mission FLBB Message NaN Ser FLBB2K-3310 $ 29-Oct-2015 16:35:39.337 Init Mission FLBB Message NaN Ver FLNTU 4.08 $ 29-Oct-2015 16:35:39.418 Init Mission FLBB Message NaN Ave 3 $ 29-Oct-2015 16:35:39.498 Init Mission FLBB Message NaN Pkt 2 $ 29-Oct-2015 16:35:39.579 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.395794 32.775000 0.202500 -100.000000 $ 29-Oct-2015 16:35:39.661 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 NaN 68.395794 32.775000 0.202500 -100.000000 $ 29-Oct-2015 16:35:42.759 Init Mission Bellows inside limits $ 29-Oct-2015 16:35:40.100 Init Mission SBE41 Message 1.230000 1.23 -0.000000 0.000000 0.000000 1.230000 -0.000000 $ 29-Oct-2015 16:35:42.982 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.230000 68.395062 32.750000 0.191250 -100.000000 $ 29-Oct-2015 16:35:46.317 Init Mission Extending Bellows 68.395253 $ 29-Oct-2015 16:35:47.526 Init Mission Extending Bellows 68.436117 $ 29-Oct-2015 16:35:48.736 Init Mission Extending Bellows 68.485406 $ 29-Oct-2015 16:35:49.946 Init Mission Extending Bellows 68.534531 $ 29-Oct-2015 16:35:51.156 Init Mission Extending Bellows 68.579964 $ 29-Oct-2015 16:35:52.368 Init Mission Extending Bellows 68.628212 $ 29-Oct-2015 16:35:53.578 Init Mission Extending Bellows 68.671871 $ 29-Oct-2015 16:35:54.788 Init Mission Extending Bellows 68.720019 $ 29-Oct-2015 16:35:55.998 Init Mission Extending Bellows 68.768095 $ 29-Oct-2015 16:35:57.208 Init Mission Extending Bellows 68.817075 $ 29-Oct-2015 16:35:58.922 Init Mission Retracting Bellows 68.866950 $ 29-Oct-2015 16:36:00.131 Init Mission Retracting Bellows 68.836805 $ 29-Oct-2015 16:36:01.341 Init Mission Retracting Bellows 68.794930 $ 29-Oct-2015 16:36:02.551 Init Mission Retracting Bellows 68.751012 $ 29-Oct-2015 16:36:03.761 Init Mission Retracting Bellows 68.707586 $ 29-Oct-2015 16:36:04.973 Init Mission Retracting Bellows 68.662412 $ 29-Oct-2015 16:36:06.183 Init Mission Retracting Bellows 68.621696 $ 29-Oct-2015 16:36:07.393 Init Mission Retracting Bellows 68.576832 $ 29-Oct-2015 16:36:08.602 Init Mission Retracting Bellows 68.534344 $ 29-Oct-2015 16:36:09.812 Init Mission Retracting Bellows 68.490339 $ 29-Oct-2015 16:36:13.048 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.230000 68.440601 32.775000 0.182500 -100.000000 $ 29-Oct-2015 16:36:13.062 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.230000 68.440601 32.775000 0.182500 -100.000000 $ 29-Oct-2015 16:36:16.093 Init Mission Sending SBE41 ds command $ 29-Oct-2015 16:36:16.321 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 29-Oct-2015 16:36:16.113 Init Mission Unparsed SBE41 Message S>ds $ 29-Oct-2015 16:36:16.374 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 51 Num commas: 0 $ 29-Oct-2015 16:36:16.204 Init Mission Unparsed SBE41 Message firmware compilation date: 18 December 2007 09:20 $ 29-Oct-2015 16:36:16.416 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 56 Num commas: 0 $ 29-Oct-2015 16:36:16.275 Init Mission Unparsed SBE41 Message stop profile when pressure is less than = 2.0 decibars $ 29-Oct-2015 16:36:16.513 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 52 Num commas: 0 $ 29-Oct-2015 16:36:16.335 Init Mission Unparsed SBE41 Message automatic bin averaging at end of profile disabled $ 29-Oct-2015 16:36:16.674 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:16.357 Init Mission Unparsed SBE41 Message number of samples = 287 $ 29-Oct-2015 16:36:16.834 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 20 Num commas: 0 $ 29-Oct-2015 16:36:16.378 Init Mission Unparsed SBE41 Message number of bins = 0 $ 29-Oct-2015 16:36:16.996 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 29-Oct-2015 16:36:16.420 Init Mission Unparsed SBE41 Message top bin interval = 10 $ 29-Oct-2015 16:36:17.157 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 29-Oct-2015 16:36:16.431 Init Mission Unparsed SBE41 Message top bin size = 10 $ 29-Oct-2015 16:36:17.521 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 19 Num commas: 0 $ 29-Oct-2015 16:36:16.462 Init Mission Unparsed SBE41 Message top bin max = 100 $ 29-Oct-2015 16:36:17.556 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 29-Oct-2015 16:36:16.511 Init Mission Unparsed SBE41 Message middle bin interval = 50 $ 29-Oct-2015 16:36:17.642 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 22 Num commas: 0 $ 29-Oct-2015 16:36:16.531 Init Mission Unparsed SBE41 Message middle bin size = 50 $ 29-Oct-2015 16:36:17.803 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 29-Oct-2015 16:36:16.561 Init Mission Unparsed SBE41 Message middle bin max = 1000 $ 29-Oct-2015 16:36:17.971 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:16.594 Init Mission Unparsed SBE41 Message bottom bin interval = 100 $ 29-Oct-2015 16:36:18.126 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 29-Oct-2015 16:36:16.624 Init Mission Unparsed SBE41 Message bottom bin size = 100 $ 29-Oct-2015 16:36:18.288 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 36 Num commas: 0 $ 29-Oct-2015 16:36:16.672 Init Mission Unparsed SBE41 Message do not include two transition bins $ 29-Oct-2015 16:36:18.449 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 32 Num commas: 0 $ 29-Oct-2015 16:36:16.702 Init Mission Unparsed SBE41 Message do not include samples per bin $ 29-Oct-2015 16:36:18.611 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 38 Num commas: 0 $ 29-Oct-2015 16:36:16.741 Init Mission Unparsed SBE41 Message pumped take sample wait time = 2 sec $ 29-Oct-2015 16:36:18.772 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:16.762 Init Mission Unparsed SBE41 Message real-time output is PTS $ 29-Oct-2015 16:36:18.914 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.230000 68.439216 32.750000 0.196250 -100.000000 $ 29-Oct-2015 16:36:19.095 Init Mission Sending SBE41 ds command $ 29-Oct-2015 16:36:19.100 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.230000 68.439216 32.750000 0.196250 -100.000000 $ 29-Oct-2015 16:36:22.173 Init Mission Sending SBE41 dc command $ 29-Oct-2015 16:36:22.387 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 6 Num commas: 0 $ 29-Oct-2015 16:36:22.189 Init Mission Unparsed SBE41 Message S>dc $ 29-Oct-2015 16:36:22.437 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:22.270 Init Mission Unparsed SBE41 Message temperature: 09-oct-12 $ 29-Oct-2015 16:36:22.477 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:22.301 Init Mission Unparsed SBE41 Message TA0 = 3.212005e-05 $ 29-Oct-2015 16:36:22.576 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:22.331 Init Mission Unparsed SBE41 Message TA1 = 2.710063e-04 $ 29-Oct-2015 16:36:22.737 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:22.362 Init Mission Unparsed SBE41 Message TA2 = -2.206761e-06 $ 29-Oct-2015 16:36:22.898 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:22.401 Init Mission Unparsed SBE41 Message TA3 = 1.436900e-07 $ 29-Oct-2015 16:36:23.060 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 26 Num commas: 0 $ 29-Oct-2015 16:36:22.443 Init Mission Unparsed SBE41 Message conductivity: 09-oct-12 $ 29-Oct-2015 16:36:23.423 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 29-Oct-2015 16:36:22.465 Init Mission Unparsed SBE41 Message G = -9.713452e-01 $ 29-Oct-2015 16:36:23.461 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 29-Oct-2015 16:36:22.496 Init Mission Unparsed SBE41 Message H = 1.428729e-01 $ 29-Oct-2015 16:36:23.544 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 29-Oct-2015 16:36:22.526 Init Mission Unparsed SBE41 Message I = -3.602926e-04 $ 29-Oct-2015 16:36:23.705 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 23 Num commas: 0 $ 29-Oct-2015 16:36:22.574 Init Mission Unparsed SBE41 Message J = 4.629943e-05 $ 29-Oct-2015 16:36:23.872 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:22.584 Init Mission Unparsed SBE41 Message CPCOR = -9.570001e-08 $ 29-Oct-2015 16:36:24.034 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:22.625 Init Mission Unparsed SBE41 Message CTCOR = 3.250000e-06 $ 29-Oct-2015 16:36:24.195 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:22.656 Init Mission Unparsed SBE41 Message WBOTC = -8.290229e-07 $ 29-Oct-2015 16:36:24.351 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 55 Num commas: 1 $ 29-Oct-2015 16:36:22.735 Init Mission Unparsed SBE41 Message pressure S/N = 3588090, range = 2900 psia: 04-oct-12 $ 29-Oct-2015 16:36:24.513 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:22.766 Init Mission Unparsed SBE41 Message PA0 = 9.502019e-02 $ 29-Oct-2015 16:36:24.674 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:22.805 Init Mission Unparsed SBE41 Message PA1 = 1.398889e-01 $ 29-Oct-2015 16:36:24.836 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 25 Num commas: 0 $ 29-Oct-2015 16:36:22.835 Init Mission Unparsed SBE41 Message PA2 = -4.043459e-08 $ 29-Oct-2015 16:36:25.003 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:22.866 Init Mission Unparsed SBE41 Message PTCA0 = 4.041972e+01 $ 29-Oct-2015 16:36:25.165 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:22.907 Init Mission Unparsed SBE41 Message PTCA1 = -2.065459e-04 $ 29-Oct-2015 16:36:25.326 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:22.937 Init Mission Unparsed SBE41 Message PTCA2 = 1.354759e-03 $ 29-Oct-2015 16:36:25.488 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:22.979 Init Mission Unparsed SBE41 Message PTCB0 = 2.527550e+01 $ 29-Oct-2015 16:36:25.649 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:23.009 Init Mission Unparsed SBE41 Message PTCB1 = 1.100000e-03 $ 29-Oct-2015 16:36:25.811 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:23.058 Init Mission Unparsed SBE41 Message PTCB2 = 0.000000e+00 $ 29-Oct-2015 16:36:25.972 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:23.078 Init Mission Unparsed SBE41 Message PTHA0 = -6.951193e+01 $ 29-Oct-2015 16:36:26.134 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:23.109 Init Mission Unparsed SBE41 Message PTHA1 = 5.247121e-02 $ 29-Oct-2015 16:36:26.295 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 27 Num commas: 0 $ 29-Oct-2015 16:36:23.148 Init Mission Unparsed SBE41 Message PTHA2 = -6.547758e-07 $ 29-Oct-2015 16:36:26.457 Init Mission SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 29 Num commas: 0 $ 29-Oct-2015 16:36:23.189 Init Mission Unparsed SBE41 Message POFFSET = 0.000000e+00 $ 29-Oct-2015 16:36:26.795 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.230000 68.439470 32.750000 0.196250 -100.000000 $ 29-Oct-2015 16:36:26.809 Init Mission Sending SBE41 dc command $ 29-Oct-2015 16:36:26.814 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.230000 68.439470 32.750000 0.196250 -100.000000 $ 29-Oct-2015 16:36:30.055 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 1.230000 68.439914 32.775000 0.183750 -100.000000 $ 29-Oct-2015 16:36:32.885 Init Mission Sending Optode Get All command $ 29-Oct-2015 16:36:30.790 Init Mission SBE41 Message -0.040000 -0.04 0.038172 0.423333 0.001147 1.048571 0.230414 $ 29-Oct-2015 16:36:33.495 Init Mission PTH Message 1224.753418 23.991667 20.424408 24.364648 $ 29-Oct-2015 16:36:33.491 Init Mission Optode Message -0.040000 !%!Product Name,4330,1996,Optode Sensor $ 29-Oct-2015 16:36:33.491 Init Mission Optode Message -0.040000 Product Number,4330,1996,4330 $ 29-Oct-2015 16:36:33.516 Init Mission Optode Message -0.040000 Serial Number,4330,1996,1996 $ 29-Oct-2015 16:36:33.547 Init Mission Optode Message -0.040000 SW ID,4330,1996,1940006 $ 29-Oct-2015 16:36:33.567 Init Mission Optode Message -0.040000 SW Version,4330,1996,4,8,1 $ 29-Oct-2015 16:36:33.618 Init Mission Optode Message -0.040000 Node Description,4330,1996,Optode Sensor #1996 $ 29-Oct-2015 16:36:33.628 Init Mission Optode Message -0.040000 Owner,4330,1996, $ 29-Oct-2015 16:36:33.659 Init Mission Optode Message -0.040000 Salinity[PSU],4330,1996,0.00 $ 29-Oct-2015 16:36:33.729 Init Mission Optode Message -0.040000 PhaseCoef,4330,1996,-1.360000E+00,1.000000E+00,0.000000E+00,0.000000E+00 $ 29-Oct-2015 16:36:33.750 Init Mission Optode Message -0.040000 FoilID,4330,1996,1206E $ 29-Oct-2015 16:36:33.792 Init Mission SBE41 Message -0.040000 -0.04 0.102235 0.000000 0.004998 0.867143 0.384024 $ 29-Oct-2015 16:36:33.959 Init Mission Optode Message -0.040000 FoilCoefA,4330,1996,-2.988314E-06,-6.137785E-06,1.684659E-03,-1.857173E-01,6.784399E-04,-5.597908E-07,1.040158E+01,-5.986907E-02,1.360425E-04,-4.776977E-07,-3.032937E+02,2.530496E+00,-1.267045E-02,1.040454E-04 $ 29-Oct-2015 16:36:34.149 Init Mission Optode Message -0.040000 FoilCoefB,4330,1996,-3.560390E-07,3.816713E+03,-4.475507E+01,4.386163E-01,-7.146342E-03,8.906235E-05,-6.343012E-07,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00 $ 29-Oct-2015 16:36:34.230 Init Mission Optode Message -0.040000 FoilPolyDegT,4330,1996,1,0,0,0,1,2,0,1,2,3,0,1,2,3,4,0,1,2,3,4,5,0,0,0,0,0,0,0 $ 29-Oct-2015 16:36:34.311 Init Mission Optode Message -0.040000 FoilPolyDegO,4330,1996,4,5,4,3,3,3,2,2,2,2,1,1,1,1,1,0,0,0,0,0,0,0,0,0,0,0,0,0 $ 29-Oct-2015 16:36:34.410 Init Mission Optode Message -0.040000 SVUFoilCoef,4330,1996,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00,0.000000E+00 $ 29-Oct-2015 16:36:34.472 Init Mission Optode Message -0.040000 ConcCoef,4330,1996,-1.446043E+00,9.675803E-01 $ 29-Oct-2015 16:36:34.486 Init Mission Optode Message -0.040000 NomAirPress[hPa],4330,1996,1013.25 $ 29-Oct-2015 16:36:34.517 Init Mission Optode Message -0.040000 NomAirMix,4330,1996,0.20946 $ 29-Oct-2015 16:36:34.553 Init Mission Optode Message -0.040000 CalDataSat[Deg],4330,1996,32.69,9.89 $ 29-Oct-2015 16:36:34.588 Init Mission Optode Message -0.040000 CalDataAPress[hPa],4330,1996,936.496 $ 29-Oct-2015 16:36:34.634 Init Mission Optode Message -0.040000 CalDataZero[Deg],4330,1996,62.974,21.484 $ 29-Oct-2015 16:36:34.648 Init Mission Optode Message -0.040000 Mode,4330,1996,AiCaP $ 29-Oct-2015 16:36:34.678 Init Mission Optode Message -0.040000 Enable Sleep,4330,1996,Yes $ 29-Oct-2015 16:36:34.710 Init Mission Optode Message -0.040000 Enable Polled Mode,4330,1996,No $ 29-Oct-2015 16:36:34.730 Init Mission Optode Message -0.040000 Enable Text,4330,1996,Yes $ 29-Oct-2015 16:36:34.771 Init Mission Optode Message -0.040000 Enable Decimalformat,4330,1996,Yes $ 29-Oct-2015 16:36:34.811 Init Mission Optode Message -0.040000 Analog TempLimit[Deg.C],4330,1996,-5.00,35.00 $ 29-Oct-2015 16:36:34.862 Init Mission Optode Message -0.040000 Analog ConcLimit[Deg.C],4330,1996,0.00,800.00 $ 29-Oct-2015 16:36:34.903 Init Mission Optode Message -0.040000 Analog SatLimit[Deg.C],4330,1996,0.00,200.00 $ 29-Oct-2015 16:36:34.953 Init Mission Optode Message -0.040000 Analog PhaseLimit[Deg.C],4330,1996,10.00,70.00 $ 29-Oct-2015 16:36:34.995 Init Mission Optode Message -0.040000 Analog Output,4330,1996,O2Concentration $ 29-Oct-2015 16:36:35.037 Init Mission Optode Message -0.040000 Analog1 Coef,4330,1996,0.000000E+00,1.000000E+00 $ 29-Oct-2015 16:36:35.079 Init Mission Optode Message -0.040000 Analog2 Coef,4330,1996,0.000000E+00,1.000000E+00 $ 29-Oct-2015 16:36:35.119 Init Mission Optode Message -0.040000 Enable AirSaturation,4330,1996,Yes $ 29-Oct-2015 16:36:35.143 Init Mission Optode Message -0.040000 Enable Rawdata,4330,1996,Yes $ 29-Oct-2015 16:36:35.173 Init Mission Optode Message -0.040000 Enable Temperature,4330,1996,Yes $ 29-Oct-2015 16:36:35.210 Init Mission Optode Message -0.040000 Enable HumidityComp,4330,1996,Yes $ 29-Oct-2015 16:36:35.241 Init Mission Optode Message -0.040000 Enable SVUformula,4330,1996,No $ 29-Oct-2015 16:36:35.280 Init Mission Optode Message -0.040000 Interval[s],4330,1996,30.000 $ 29-Oct-2015 16:36:35.291 Init Mission Optode Message -0.040000 Location,4330,1996, $ 29-Oct-2015 16:36:35.332 Init Mission Optode Message -0.040000 Geographic Position,4330,1996,60.323605,5.37225 $ 29-Oct-2015 16:36:35.361 Init Mission Optode Message -0.040000 Vertical Position,4330,1996, $ 29-Oct-2015 16:36:35.382 Init Mission Optode Message -0.040000 Reference,4330,1996, $ 29-Oct-2015 16:36:35.383 Init Mission Optode Message -0.040000 # $ 29-Oct-2015 16:36:36.785 Init Mission SBE41 Message -0.620000 -0.62 0.159387 0.193333 0.011142 0.602857 0.649190 $ 29-Oct-2015 16:36:37.118 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.620000 68.439071 32.750000 0.187500 -100.000000 $ 29-Oct-2015 16:36:37.200 Init Mission Sending Optode Get All command $ 29-Oct-2015 16:36:37.280 Init Mission Normal state exit $ 29-Oct-2015 16:36:37.360 Init Mission RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.620000 68.439071 32.750000 0.187500 -100.000000 $ 29-Oct-2015 16:36:40.258 Init Profile State Entry $ 29-Oct-2015 16:36:40.263 Init Profile Resetting SBE41 with qs $ 29-Oct-2015 16:36:41.268 Init Profile Synching system time to GPS $ 29-Oct-2015 16:36:39.786 Init Profile SBE41 Message -0.050000 -0.05 0.171512 -0.190000 0.016393 0.420000 0.615667 $ 29-Oct-2015 16:36:51.427 Init Profile SBE41 parse in bytes didn't look like fp or pts response. in bytes length: 4 Num commas: 0 $ 29-Oct-2015 16:36:41.276 Init Profile Unparsed SBE41 Message S> $ 29-Oct-2015 16:36:51.444 Init Profile Normal state exit $ 29-Oct-2015 16:36:51.448 Init Profile RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.050000 68.440002 32.775000 0.191250 -100.000000 $ 29-Oct-2015 16:36:52.166 Surface Ops Set Bellows State Entry $ 29-Oct-2015 16:36:52.172 Surface Ops Set Bellows Inflating bellows to Surface Ops position = 67.700000000000003 $ 29-Oct-2015 16:36:51.613 Surface Ops Set Bellows SBE41 Message -0.350000 -0.35 0.130197 0.100000 0.016356 0.194286 0.545695 $ 29-Oct-2015 16:36:52.203 Surface Ops Set Bellows Normal state exit $ 29-Oct-2015 16:36:52.208 Surface Ops Set Bellows RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.350000 68.440002 32.775000 0.191250 -100.000000 $ 29-Oct-2015 16:36:55.169 Pre-Mission Delay State Entry $ 29-Oct-2015 16:36:54.611 Pre-Mission Delay SBE41 Message -0.070000 -0.07 0.055024 -0.093333 0.008462 0.008571 0.338314 $ 29-Oct-2015 16:36:55.595 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.070000 68.439191 32.775000 0.195000 -100.000000 $ 29-Oct-2015 16:36:57.611 Pre-Mission Delay SBE41 Message -0.050000 -0.05 -0.006630 -0.006667 -0.004641 -0.174286 0.051229 $ 29-Oct-2015 16:36:58.242 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.050000 68.439191 32.775000 0.195000 -100.000000 $ 29-Oct-2015 16:37:00.614 Pre-Mission Delay SBE41 Message -0.060000 -0.06 -0.027526 0.003333 -0.015918 -0.177143 0.050390 $ 29-Oct-2015 16:37:01.695 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.060000 68.440002 32.775000 0.186250 -100.000000 $ 29-Oct-2015 16:37:03.611 Pre-Mission Delay SBE41 Message -0.070000 -0.07 -0.025409 0.003333 -0.019874 -0.181429 0.049148 $ 29-Oct-2015 16:37:04.545 Pre-Mission Delay RecMode true, PID Off, Stopped, Scend sub: , depthNum = 0 -0.070000 68.438800 32.750000 0.183750 -100.000000