/**
  ******************************************************************************
  * @file    usbh_diskio_dma_template.c
  * @author  MCD Application Team
  * @brief   USB Host Disk I/O template driver (with internal DMA).
             This file needs to be copied under the application project
	     alongside the respective header file
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2017 STMicroelectronics. All rights reserved.
  *
  * This software component is licensed by ST under BSD 3-Clause license,
  * the "License"; You may not use this file except in compliance with the
  * License. You may obtain a copy of the License at:
  *                       opensource.org/licenses/BSD-3-Clause
  *
  ******************************************************************************
**/
/* Includes ------------------------------------------------------------------*/
#include "ff_gen_drv.h"
#include "usbh_diskio_dma.h"

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/

#define USB_DEFAULT_BLOCK_SIZE 512

/* Private variables ---------------------------------------------------------*/
static DWORD scratch[_MAX_SS / 4];
extern USBH_HandleTypeDef  hUSB_Host;

/* Private function prototypes -----------------------------------------------*/
DSTATUS USBH_initialize (BYTE);
DSTATUS USBH_status (BYTE);
DRESULT USBH_read (BYTE, BYTE*, DWORD, UINT);

#if _USE_WRITE == 1
  DRESULT USBH_write (BYTE, const BYTE*, DWORD, UINT);
#endif /* _USE_WRITE == 1 */

#if _USE_IOCTL == 1
  DRESULT USBH_ioctl (BYTE, BYTE, void*);
#endif /* _USE_IOCTL == 1 */

const Diskio_drvTypeDef  USBH_Driver =
{
  USBH_initialize,
  USBH_status,
  USBH_read,
#if  _USE_WRITE == 1
  USBH_write,
#endif /* _USE_WRITE == 1 */
#if  _USE_IOCTL == 1
  USBH_ioctl,
#endif /* _USE_IOCTL == 1 */
};

/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Initializes a Drive
  * @param  lun : lun id
  * @retval DSTATUS: Operation status
  */
DSTATUS USBH_initialize(BYTE lun)
{
  /* CAUTION : USB Host library has to be initialized in the application */

  return RES_OK;
}

/**
  * @brief  Gets Disk Status
  * @param  lun : lun id
  * @retval DSTATUS: Operation status
  */
DSTATUS USBH_status(BYTE lun)
{
  DRESULT res = RES_ERROR;

  if(USBH_MSC_UnitIsReady(&hUSB_Host, lun))
  {
    res = RES_OK;
  }
  else
  {
    res = RES_ERROR;
  }

  return res;
}
/**
  * @brief  Reads Sector(s)
  * @param  lun : lun id
  * @param  *buff: Data buffer to store read data
  * @param  sector: Sector address (LBA)
  * @param  count: Number of sectors to read (1..128)
  * @retval DRESULT: Operation result
  */
DRESULT USBH_read(BYTE lun, BYTE *buff, DWORD sector, UINT count)
{
  DRESULT res = RES_ERROR;
  MSC_LUNTypeDef info;
  USBH_StatusTypeDef  status = USBH_OK;

  if ((DWORD)buff & 3)
  {
    while ((count--)&&(status == USBH_OK))
    {
      status = USBH_MSC_Read(&hUSB_Host, lun, sector + count, (uint8_t *)scratch, 1);

      if(status == USBH_OK)
      {
        memcpy (&buff[count * _MAX_SS] ,scratch, _MAX_SS);
      }
      else
      {
        break;
      }
    }
  }
  else
  {
    status = USBH_MSC_Read(&hUSB_Host, lun, sector, buff, count);
  }

  if(status == USBH_OK)
  {
    res = RES_OK;
  }
  else
  {
    USBH_MSC_GetLUNInfo(&hUSB_Host, lun, &info);

    switch (info.sense.asc)
    {
    case SCSI_ASC_LOGICAL_UNIT_NOT_READY:
    case SCSI_ASC_MEDIUM_NOT_PRESENT:
    case SCSI_ASC_NOT_READY_TO_READY_CHANGE:
      USBH_ErrLog ("USB Disk is not ready!");
      res = RES_NOTRDY;
      break;

    default:
      res = RES_ERROR;
      break;
    }
  }

  return res;
}

/**
  * @brief  Writes Sector(s)
  * @param  lun : lun id
  * @param  *buff: Data to be written
  * @param  sector: Sector address (LBA)
  * @param  count: Number of sectors to write (1..128)
  * @retval DRESULT: Operation result
  */
#if _USE_WRITE == 1
DRESULT USBH_write(BYTE lun, const BYTE *buff, DWORD sector, UINT count)
{
  DRESULT res = RES_ERROR;
  MSC_LUNTypeDef info;
  USBH_StatusTypeDef  status = USBH_OK;

  if ((DWORD)buff & 3)
  {

    while (count--)
    {
      memcpy (scratch, &buff[count * _MAX_SS], _MAX_SS);

      status = USBH_MSC_Write(&hUSB_Host, lun, sector + count, (BYTE *)scratch, 1) ;
      if(status == USBH_FAIL)
      {
        break;
      }
    }
  }
  else
  {
    status = USBH_MSC_Write(&hUSB_Host, lun, sector, (BYTE *)buff, count);
  }

  if(status == USBH_OK)
  {
    res = RES_OK;
  }
  else
  {
    USBH_MSC_GetLUNInfo(&hUSB_Host, lun, &info);

    switch (info.sense.asc)
    {
    case SCSI_ASC_WRITE_PROTECTED:
      USBH_ErrLog("USB Disk is Write protected!");
      res = RES_WRPRT;
      break;

    case SCSI_ASC_LOGICAL_UNIT_NOT_READY:
    case SCSI_ASC_MEDIUM_NOT_PRESENT:
    case SCSI_ASC_NOT_READY_TO_READY_CHANGE:
      USBH_ErrLog("USB Disk is not ready!");
      res = RES_NOTRDY;
      break;

    default:
      res = RES_ERROR;
      break;
    }
  }

  return res;
}
#endif /* _USE_WRITE == 1 */

/**
  * @brief  I/O control operation
  * @param  lun : lun id
  * @param  cmd: Control code
  * @param  *buff: Buffer to send/receive control data
  * @retval DRESULT: Operation result
  */
#if _USE_IOCTL == 1
DRESULT USBH_ioctl(BYTE lun, BYTE cmd, void *buff)
{
  DRESULT res = RES_ERROR;
  MSC_LUNTypeDef info;

  switch (cmd)
  {
  /* Make sure that no pending write process */
  case CTRL_SYNC:
    res = RES_OK;
    break;

  /* Get number of sectors on the disk (DWORD) */
  case GET_SECTOR_COUNT :
    if(USBH_MSC_GetLUNInfo(&hUSB_Host, lun, &info) == USBH_OK)
    {
      *(DWORD*)buff = info.capacity.block_nbr;
      res = RES_OK;
    }
    else
    {
      res = RES_ERROR;
    }
    break;

  /* Get R/W sector size (WORD) */
  case GET_SECTOR_SIZE :
    if(USBH_MSC_GetLUNInfo(&hUSB_Host, lun, &info) == USBH_OK)
    {
      *(DWORD*)buff = info.capacity.block_size;
      res = RES_OK;
    }
    else
    {
      res = RES_ERROR;
    }
    break;

    /* Get erase block size in unit of sector (DWORD) */
  case GET_BLOCK_SIZE :

    if(USBH_MSC_GetLUNInfo(&hUSB_Host, lun, &info) == USBH_OK)
    {
      *(DWORD*)buff = info.capacity.block_size / USB_DEFAULT_BLOCK_SIZE;
      res = RES_OK;
    }
    else
    {
      res = RES_ERROR;
    }
    break;

  default:
    res = RES_PARERR;
  }

  return res;
}
#endif /* _USE_IOCTL == 1 */

/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/