/** * \file GravityModel.hpp * \brief Header for GeographicLib::GravityModel class * * Copyright (c) Charles Karney (2011) and licensed under * the MIT/X11 License. For more information, see * http://geographiclib.sourceforge.net/ **********************************************************************/ #if !defined(GEOGRAPHICLIB_GRAVITYMODEL_HPP) #define GEOGRAPHICLIB_GRAVITYMODEL_HPP 1 #include #include #include #include #if defined(_MSC_VER) // Squelch warnings about dll vs vector # pragma warning (push) # pragma warning (disable: 4251) #endif namespace GeographicLib { class GravityCircle; /** * \brief Model of the earth's gravity field * * Evaluate the earth's gravity field according to a model. The supported * models treat only the gravitational field exterior to the mass of the * earth. When computing the field at points near (but above) the surface of * the earth a small correction can be applied to account for the mass of the * atomsphere above the point in question; see \ref gravityatmos. * Determining the height of the geoid above the ellipsoid entails correcting * for the mass of the earth above the geoid. The egm96 and egm2008 include * separate correction terms to account for this mass. * * Definitions and terminology (from Heiskanen and Moritz, Sec 2-13): * - \e V = gravitational potential; * - Φ = rotational potential; * - \e W = \e V + Φ = \e T + \e U = total potential; * - V₀ = normal gravitation potential; * - \e U = V₀ + Φ = total normal potential; * - \e T = \e W − \e U = \e V − V₀ = anomalous * or disturbing potential; * - g = ∇\e W = γ + δ; * - f = ∇Φ; * - Γ = ∇V₀; * - γ = ∇\e U; * - δ = ∇\e T = gravity disturbance vector * = g_P − γ_P; * - δ\e g = gravity disturbance = g_P − * γ_P; * - Δg = gravity anomaly vector = g_P * − γ_Q; here the line \e PQ is * perpendicular to ellipsoid and the potential at \e P equals the normal * potential at \e Q; * - Δ\e g = gravity anomaly = g_P − * γ_Q; * - (ξ, η) deflection of the vertical, the difference in * directions of g_P and * γ_Q, ξ = NS, η = EW. * - \e X, \e Y, \e Z, geocentric coordinates; * - \e x, \e y, \e z, local cartesian coordinates used to denote the east, * north and up directions. * * See \ref gravity for details of how to install the gravity models and the * data format. * * References: * - W. A. Heiskanen and H. Moritz, Physical Geodesy (Freeman, San * Francisco, 1967). * * Example of use: * \include example-GravityModel.cpp * * Gravity is a command-line utility providing * access to the functionality of GravityModel and GravityCircle. **********************************************************************/ class GEOGRAPHICLIB_EXPORT GravityModel { private: typedef Math::real real; friend class GravityCircle; static const int idlength_ = 8; std::string _name, _dir, _description, _date, _filename, _id; real _amodel, _GMmodel, _zeta0, _corrmult; SphericalHarmonic::normalization _norm; NormalGravity _earth; std::vector _Cx, _Sx, _CC, _CS, _zonal; real _dzonal0; // A left over contribution to _zonal. SphericalHarmonic _gravitational; SphericalHarmonic1 _disturbing; SphericalHarmonic _correction; void ReadMetadata(const std::string& name); Math::real InternalT(real X, real Y, real Z, real& deltaX, real& deltaY, real& deltaZ, bool gradp, bool correct) const; GravityModel(const GravityModel&); // copy constructor not allowed GravityModel& operator=(const GravityModel&); // nor copy assignment enum captype { CAP_NONE = 0U, CAP_G = 1U<<0, // implies potentials W and V CAP_T = 1U<<1, CAP_DELTA = 1U<<2 | CAP_T, // delta implies T? CAP_C = 1U<<3, CAP_GAMMA0 = 1U<<4, CAP_GAMMA = 1U<<5, CAP_ALL = 0x3FU, }; public: /** * Bit masks for the capabilities to be given to the GravityCircle object * produced by Circle. **********************************************************************/ enum mask { /** * No capabilities. * @hideinitializer **********************************************************************/ NONE = 0U, /** * Allow calls to GravityCircle::Gravity, GravityCircle::W, and * GravityCircle::V. * @hideinitializer **********************************************************************/ GRAVITY = CAP_G, /** * Allow calls to GravityCircle::Disturbance and GravityCircle::T. * @hideinitializer **********************************************************************/ DISTURBANCE = CAP_DELTA, /** * Allow calls to GravityCircle::T(real lon) (i.e., computing the * disturbing potential and not the gravity disturbance vector). * @hideinitializer **********************************************************************/ DISTURBING_POTENTIAL = CAP_T, /** * Allow calls to GravityCircle::SphericalAnomaly. * @hideinitializer **********************************************************************/ SPHERICAL_ANOMALY = CAP_DELTA | CAP_GAMMA, /** * Allow calls to GravityCircle::GeoidHeight. * @hideinitializer **********************************************************************/ GEOID_HEIGHT = CAP_T | CAP_C | CAP_GAMMA0, /** * All capabilities. * @hideinitializer **********************************************************************/ ALL = CAP_ALL, }; /** \name Setting up the gravity model **********************************************************************/ ///@{ /** * Construct a gravity model. * * @param[in] name the name of the model. * @param[in] path (optional) directory for data file. * @exception GeographicErr if the data file cannot be found, is * unreadable, or is corrupt. * @exception std::bad_alloc if the memory necessary for storing the model * can't be allocated. * * A filename is formed by appending ".egm" (World Gravity Model) to the * name. If \e path is specified (and is non-empty), then the file is * loaded from directory, \e path. Otherwise the path is given by * DefaultGravityPath(). * * This file contains the metadata which specifies the properties of the * model. The coefficients for the spherical harmonic sums are obtained * from a file obtained by appending ".cof" to metadata file (so the * filename ends in ".egm.cof"). **********************************************************************/ explicit GravityModel(const std::string& name, const std::string& path = ""); ///@} /** \name Compute gravity in geodetic coordinates **********************************************************************/ ///@{ /** * Evaluate the gravity at an arbitrary point above (or below) the * ellipsoid. * * @param[in] lat the geographic latitude (degrees). * @param[in] lon the geographic longitude (degrees). * @param[in] h the height above the ellipsoid (meters). * @param[out] gx the easterly component of the acceleration * (m s⁻²). * @param[out] gy the northerly component of the acceleration * (m s⁻²). * @param[out] gz the upward component of the acceleration * (m s⁻²); this is usually negative. * @return \e W the sum of the gravitational and centrifugal potentials. * * The function includes the effects of the earth's rotation. **********************************************************************/ Math::real Gravity(real lat, real lon, real h, real& gx, real& gy, real& gz) const; /** * Evaluate the gravity disturbance vector at an arbitrary point above (or * below) the ellipsoid. * * @param[in] lat the geographic latitude (degrees). * @param[in] lon the geographic longitude (degrees). * @param[in] h the height above the ellipsoid (meters). * @param[out] deltax the easterly component of the disturbance vector * (m s⁻²). * @param[out] deltay the northerly component of the disturbance vector * (m s⁻²). * @param[out] deltaz the upward component of the disturbance vector * (m s⁻²). * @return \e T the corresponding disturbing potential. **********************************************************************/ Math::real Disturbance(real lat, real lon, real h, real& deltax, real& deltay, real& deltaz) const; /** * Evaluate the geoid height. * * @param[in] lat the geographic latitude (degrees). * @param[in] lon the geographic longitude (degrees). * @return \e N the height of the geoid above the ReferenceEllipsoid() * (meters). * * This calls NormalGravity::U for ReferenceEllipsoid(). Some * approximations are made in computing the geoid height so that the * results of the NGA codes are reproduced accurately. Details are given * in \ref gravitygeoid. **********************************************************************/ Math::real GeoidHeight(real lat, real lon) const; /** * Evaluate the components of the gravity anomaly vector using the * spherical approximation. * * @param[in] lat the geographic latitude (degrees). * @param[in] lon the geographic longitude (degrees). * @param[in] h the height above the ellipsoid (meters). * @param[out] Dg01 the gravity anomaly (m s⁻²). * @param[out] xi the northerly component of the deflection of the vertical * (degrees). * @param[out] eta the easterly component of the deflection of the vertical * (degrees). * * The spherical approximation (see Heiskanen and Moritz, Sec 2-14) is used * so that the results of the NGA codes are reproduced accurately. * approximations used here. Details are given in \ref gravitygeoid. **********************************************************************/ void SphericalAnomaly(real lat, real lon, real h, real& Dg01, real& xi, real& eta) const; ///@} /** \name Compute gravity in geocentric coordinates **********************************************************************/ ///@{ /** * Evaluate the components of the acceleration due to gravity and the * centrifugal acceleration in geocentric coordinates. * * @param[in] X geocentric coordinate of point (meters). * @param[in] Y geocentric coordinate of point (meters). * @param[in] Z geocentric coordinate of point (meters). * @param[out] gX the \e X component of the acceleration * (m s⁻²). * @param[out] gY the \e Y component of the acceleration * (m s⁻²). * @param[out] gZ the \e Z component of the acceleration * (m s⁻²). * @return \e W = \e V + Φ the sum of the gravitational and * centrifugal potentials (m² s⁻²). * * This calls NormalGravity::U for ReferenceEllipsoid(). **********************************************************************/ Math::real W(real X, real Y, real Z, real& gX, real& gY, real& gZ) const; /** * Evaluate the components of the acceleration due to gravity in geocentric * coordinates. * * @param[in] X geocentric coordinate of point (meters). * @param[in] Y geocentric coordinate of point (meters). * @param[in] Z geocentric coordinate of point (meters). * @param[out] GX the \e X component of the acceleration * (m s⁻²). * @param[out] GY the \e Y component of the acceleration * (m s⁻²). * @param[out] GZ the \e Z component of the acceleration * (m s⁻²). * @return \e V = \e W - Φ the gravitational potential * (m² s⁻²). **********************************************************************/ Math::real V(real X, real Y, real Z, real& GX, real& GY, real& GZ) const; /** * Evaluate the components of the gravity disturbance in geocentric * coordinates. * * @param[in] X geocentric coordinate of point (meters). * @param[in] Y geocentric coordinate of point (meters). * @param[in] Z geocentric coordinate of point (meters). * @param[out] deltaX the \e X component of the gravity disturbance * (m s⁻²). * @param[out] deltaY the \e Y component of the gravity disturbance * (m s⁻²). * @param[out] deltaZ the \e Z component of the gravity disturbance * (m s⁻²). * @return \e T = \e W - \e U the disturbing potential (also called the * anomalous potential) (m² s⁻²). **********************************************************************/ Math::real T(real X, real Y, real Z, real& deltaX, real& deltaY, real& deltaZ) const { return InternalT(X, Y, Z, deltaX, deltaY, deltaZ, true, true); } /** * Evaluate disturbing potential in geocentric coordinates. * * @param[in] X geocentric coordinate of point (meters). * @param[in] Y geocentric coordinate of point (meters). * @param[in] Z geocentric coordinate of point (meters). * @return \e T = \e W - \e U the disturbing potential (also called the * anomalous potential) (m² s⁻²). **********************************************************************/ Math::real T(real X, real Y, real Z) const { real dummy; return InternalT(X, Y, Z, dummy, dummy, dummy, false, true); } /** * Evaluate the components of the acceleration due to normal gravity and * the centrifugal acceleration in geocentric coordinates. * * @param[in] X geocentric coordinate of point (meters). * @param[in] Y geocentric coordinate of point (meters). * @param[in] Z geocentric coordinate of point (meters). * @param[out] gammaX the \e X component of the normal acceleration * (m s⁻²). * @param[out] gammaY the \e Y component of the normal acceleration * (m s⁻²). * @param[out] gammaZ the \e Z component of the normal acceleration * (m s⁻²). * @return \e U = V₀ + Φ the sum of the * normal gravitational and centrifugal potentials * (m² s⁻²). * * This calls NormalGravity::U for ReferenceEllipsoid(). **********************************************************************/ Math::real U(real X, real Y, real Z, real& gammaX, real& gammaY, real& gammaZ) const { return _earth.U(X, Y, Z, gammaX, gammaY, gammaZ); } /** * Evaluate the centrifugal acceleration in geocentric coordinates. * * @param[in] X geocentric coordinate of point (meters). * @param[in] Y geocentric coordinate of point (meters). * @param[out] fX the \e X component of the centrifugal acceleration * (m s⁻²). * @param[out] fY the \e Y component of the centrifugal acceleration * (m s⁻²). * @return Φ the centrifugal potential (m² * s⁻²). * * This calls NormalGravity::Phi for ReferenceEllipsoid(). **********************************************************************/ Math::real Phi(real X, real Y, real& fX, real& fY) const { return _earth.Phi(X, Y, fX, fY); } ///@} /** \name Compute gravity on a circle of constant latitude **********************************************************************/ ///@{ /** * Create a GravityCircle object to allow the gravity field at many points * with constant \e lat and \e h and varying \e lon to be computed * efficiently. * * @param[in] lat latitude of the point (degrees). * @param[in] h the height of the point above the ellipsoid (meters). * @param[in] caps bitor'ed combination of GravityModel::mask values * specifying the capabilities of the resulting GravityCircle object. * @exception std::bad_alloc if the memory necessary for creating a * GravityCircle can't be allocated. * @return a GravityCircle object whose member functions computes the * gravitational field at a particular values of \e lon. * * The GravityModel::mask values are * - \e caps |= GravityModel::GRAVITY * - \e caps |= GravityModel::DISTURBANCE * - \e caps |= GravityModel::DISTURBING_POTENTIAL * - \e caps |= GravityModel::SPHERICAL_ANOMALY * - \e caps |= GravityModel::GEOID_HEIGHT * . * The default value of \e caps is GravityModel::ALL which turns on all the * capabilities. If an unsupported function is invoked, it will return * NaNs. Note that GravityModel::GEOID_HEIGHT will only be honored if \e h * = 0. * * If the field at several points on a circle of latitude need to be * calculated then creating a GravityCircle object and using its member * functions will be substantially faster, especially for high-degree * models. See \ref gravityparallel for an example of using GravityCircle * (together with OpenMP) to speed up the computation of geoid heights. **********************************************************************/ GravityCircle Circle(real lat, real h, unsigned caps = ALL) const; ///@} /** \name Inspector functions **********************************************************************/ ///@{ /** * @return the NormalGravity object for the reference ellipsoid. **********************************************************************/ const NormalGravity& ReferenceEllipsoid() const { return _earth; } /** * @return the description of the gravity model, if available, in the data * file; if absent, return "NONE". **********************************************************************/ const std::string& Description() const { return _description; } /** * @return date of the model; if absent, return "UNKNOWN". **********************************************************************/ const std::string& DateTime() const { return _date; } /** * @return full file name used to load the gravity model. **********************************************************************/ const std::string& GravityFile() const { return _filename; } /** * @return "name" used to load the gravity model (from the first argument * of the constructor, but this may be overridden by the model file). **********************************************************************/ const std::string& GravityModelName() const { return _name; } /** * @return directory used to load the gravity model. **********************************************************************/ const std::string& GravityModelDirectory() const { return _dir; } /** * @return \e a the equatorial radius of the ellipsoid (meters). **********************************************************************/ Math::real MajorRadius() const { return _earth.MajorRadius(); } /** * @return \e GM the mass constant of the model (m³ * s⁻²); this is the product of \e G the gravitational * constant and \e M the mass of the earth (usually including the mass of * the earth's atmosphere). **********************************************************************/ Math::real MassConstant() const { return _GMmodel; } /** * @return \e GM the mass constant of the ReferenceEllipsoid() * (m³ s⁻²). **********************************************************************/ Math::real ReferenceMassConstant() const { return _earth.MassConstant(); } /** * @return ω the angular velocity of the model and the * ReferenceEllipsoid() (rad s⁻¹). **********************************************************************/ Math::real AngularVelocity() const { return _earth.AngularVelocity(); } /** * @return \e f the flattening of the ellipsoid. **********************************************************************/ Math::real Flattening() const { return _earth.Flattening(); } ///@} /** * @return the default path for gravity model data files. * * This is the value of the environment variable * GEOGRAPHICLIB_GRAVITY_PATH, if set; otherwise, it is * $GEOGRAPHICLIB_DATA/gravity if the environment variable * GEOGRAPHICLIB_DATA is set; otherwise, it is a compile-time default * (/usr/local/share/GeographicLib/gravity on non-Windows systems and * C:/ProgramData/GeographicLib/gravity on Windows systems). **********************************************************************/ static std::string DefaultGravityPath(); /** * @return the default name for the gravity model. * * This is the value of the environment variable * GEOGRAPHICLIB_GRAVITY_NAME, if set; otherwise, it is "egm96". The * GravityModel class does not use this function; it is just provided as a * convenience for a calling program when constructing a GravityModel * object. **********************************************************************/ static std::string DefaultGravityName(); }; } // namespace GeographicLib #if defined(_MSC_VER) # pragma warning (pop) #endif #endif // GEOGRAPHICLIB_GRAVITYMODEL_HPP