PH CALIBRATION FILE GENERATED ON: 10/05/2022 09:40
GDF 015
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = XXXX, APEX# 015
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
8.09848e-12,-5.43762e-08,-1.69334e-03, =k2(fP)*T
-4.47064e-06, =k3*P
-2.15526e-09, =k4*P^3
1.39995e-11, =k5*P^4
-1.47649e-14, =k6*P^5
6.26038e-18, =k7*P^6
-9.38381e-22, =k8*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
08/23-08/28/2022	A		-0.018					8.09848e-12	-5.43762e-08	-1.69334e-03	-1.04467	0.9998			-9.38381e-22	6.26038e-18	-1.47649e-14	1.39995e-11	-2.15526e-09	-4.47064e-06	-1.04449e+00	0.9275	GDF		015									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	015	
pH stem mfg:	MBARI	GDF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF015_RFD_082222_chanA.csv	
PT test channel :	A	
HCl concentration:	0.01000	Molar
k2 Calibration window:	08/23/2022 20:16	08/28/2022 22:38
Data subset:	ASCENDING	
Vrs drift rate:	-0.01801	mV/day
Vk drift rate:	0.51807	mV/day
Avg std Vk	362.62873	uVolts
Average k2:	-1.7254e-03	V/degC
Std dev k2:	2.5992e-05	V/degC
k2 f(P) c0	-1.6933e-03	
k2 f(P) c1	-5.4376e-08	
k2 f(P) c2	8.0985e-12	
k0 HCL:	-1.0447	Volts
Avg Ik:	6.15	nano amps
Std dev Ik:	7.06	nano amps
Avg Ib:	17.48	nano amps
Std dev Ib:	8.27	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
24.0	-1.6879e-03	4.7926e-06	-1.0447	7.0633e-05	0.9998	22	2.1	19.9
39.0	-1.6945e-03	3.2538e-06	-1.0446	4.6717e-05	0.9998	43	2.1	19.9
61.8	-1.6946e-03	3.8222e-06	-1.0448	5.4598e-05	0.9998	41	2.1	19.9
86.5	-1.6973e-03	3.2754e-06	-1.0449	4.6787e-05	0.9999	41	2.1	19.9
123.9	-1.6990e-03	2.2429e-06	-1.0451	3.1358e-05	0.9999	77	2.2	19.9
174.1	-1.7035e-03	2.5386e-06	-1.0453	3.5234e-05	0.9998	74	2.2	19.9
248.4	-1.7097e-03	2.4102e-06	-1.0456	3.2392e-05	0.9997	131	2.2	19.9
349.8	-1.7151e-03	2.1387e-06	-1.0458	2.8940e-05	0.9998	133	2.2	19.9
448.2	-1.7171e-03	1.8911e-06	-1.0461	2.5775e-05	0.9998	131	2.2	19.9
550.8	-1.7267e-03	2.0133e-06	-1.0462	2.7582e-05	0.9998	134	2.2	19.9
650.4	-1.7291e-03	1.8282e-06	-1.0464	2.5448e-05	0.9998	138	2.2	19.9
749.7	-1.7353e-03	1.6322e-06	-1.0465	2.2923e-05	0.9999	134	2.2	19.9
899.5	-1.7367e-03	1.2656e-06	-1.0465	1.7854e-05	0.9999	266	2.2	19.9
1098.8	-1.7345e-03	1.3372e-06	-1.0467	1.8845e-05	0.9998	263	2.2	19.9
1298.9	-1.7434e-03	1.2678e-06	-1.0467	1.7886e-05	0.9999	257	2.2	19.9
1499.0	-1.7492e-03	1.7047e-06	-1.0468	2.4091e-05	0.9998	261	2.2	19.9
1699.9	-1.7663e-03	1.5671e-06	-1.0466	2.2459e-05	0.9998	246	2.2	19.9
1901.1	-1.7709e-03	1.8764e-06	-1.0462	2.7062e-05	0.9997	241	2.3	19.9
2034.8	-1.7722e-03	2.8846e-06	-1.0459	4.1377e-05	0.9998	79	2.3	19.9

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	2.3047e-08	
f(P) R*R:	0.9275	
f(P) c0	-1.0445e+00	
f(P) c1	-4.4706e-06	
f(P) c2	-2.1553e-09	
f(P) c3	1.4000e-11	
f(P) c4	-1.4765e-14	
f(P) c5	6.2604e-18	
f(P) c6	-9.3838e-22	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: