PH CALIBRATION FILE GENERATED ON: 07/14/2022 13:39
GDF 023
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = XXXX, APEX# 023
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-3.73204e-11,6.21584e-09,-1.09112e-03, =k2(fP)*T
-2.36126e-06, =k3*P
6.50722e-10, =k4*P^3
-1.45437e-12, =k5*P^4
-1.10200e-15, =k6*P^5
1.67402e-18, =k7*P^6
-4.10807e-22, =k8*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
07/09-07/14/2022	B		-0.134					-3.73204e-11	6.21584e-09	-1.09112e-03	-1.40210	0.9993			-4.10807e-22	1.67402e-18	-1.10200e-15	-1.45437e-12	6.50722e-10	-2.36126e-06	-1.40188e+00	0.9715	GDF		023									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	023	
pH stem mfg:	MBARI	GDF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF023_070722_chanB.csv	
PT test channel :	B	
HCl concentration:	0.01000	Molar
k2 Calibration window:	07/09/2022 00:22	07/14/2022 10:16
Data subset:	ALL	
Vrs drift rate:	-0.13442	mV/day
Vk drift rate:	2.64409	mV/day
Avg std Vk	62.69787	uVolts
Average k2:	-1.1228e-03	V/degC
Std dev k2:	4.5460e-05	V/degC
k2 f(P) c0	-1.0911e-03	
k2 f(P) c1	6.2158e-09	
k2 f(P) c2	-3.7320e-11	
k0 HCL:	-1.4021	Volts
Avg Ik:	-27.02	nano amps
Std dev Ik:	9.59	nano amps
Avg Ib:	-1.37	nano amps
Std dev Ib:	10.16	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
21.0	-1.0769e-03	4.7771e-07	-1.4021	6.4079e-06	0.9993	3468	2.2	19.9
38.8	-1.0851e-03	5.2874e-06	-1.4019	7.8722e-05	0.9990	45	2.3	19.9
61.3	-1.0912e-03	5.8100e-06	-1.4019	8.3102e-05	0.9988	43	2.3	19.9
86.2	-1.0899e-03	7.4332e-06	-1.4020	1.0513e-04	0.9982	41	2.3	19.9
122.9	-1.0922e-03	6.3814e-06	-1.4021	9.3901e-05	0.9976	71	2.3	19.9
174.2	-1.0901e-03	8.5676e-06	-1.4023	1.2566e-04	0.9958	71	2.3	19.9
249.6	-1.1020e-03	7.4371e-06	-1.4023	1.0684e-04	0.9938	140	2.2	19.9
349.0	-1.0963e-03	1.0105e-05	-1.4028	1.4633e-04	0.9899	122	2.2	19.9
449.3	-1.1081e-03	1.1846e-05	-1.4028	1.7574e-04	0.9881	107	2.2	19.9
545.3	-1.1169e-03	1.0462e-05	-1.4030	1.5674e-04	0.9904	112	2.2	19.9
648.0	-1.1007e-03	8.0925e-06	-1.4036	1.1733e-04	0.9934	125	2.2	19.9
749.4	-1.1040e-03	6.5588e-06	-1.4040	9.4010e-05	0.9956	127	2.2	19.9
899.5	-1.1094e-03	4.2284e-06	-1.4046	6.0762e-05	0.9965	244	2.2	19.9
1098.3	-1.1254e-03	3.9110e-06	-1.4053	5.7425e-05	0.9972	233	2.2	19.9
1301.7	-1.1340e-03	3.1001e-06	-1.4061	4.5058e-05	0.9982	238	2.3	19.9
1502.3	-1.1615e-03	2.9103e-06	-1.4064	4.2577e-05	0.9986	233	2.3	19.9
1699.8	-1.1900e-03	2.7234e-06	-1.4065	4.0578e-05	0.9989	215	2.3	19.9
1902.4	-1.2216e-03	2.4707e-06	-1.4061	3.5863e-05	0.9991	214	2.3	19.9
2064.3	-1.2383e-03	1.1946e-06	-1.4058	1.7562e-05	0.9992	861	2.4	19.9

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	9.5167e-08	
f(P) R*R:	0.9715	
f(P) c0	-1.4019e+00	
f(P) c1	-2.3613e-06	
f(P) c2	6.5072e-10	
f(P) c3	-1.4544e-12	
f(P) c4	-1.1020e-15	
f(P) c5	1.6740e-18	
f(P) c6	-4.1081e-22	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: