PH CALIBRATION FILE GENERATED ON: 07/14/2022 13:41
GDF 023
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = XXXX, APEX# 023
8, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-4.07241e-11,1.42499e-08,-1.10654e-03, =k2(fP)*T
-1.24114e-06, =k3*P
5.37391e-09, =k4*P^3
-1.81469e-11, =k5*P^4
1.55660e-14, =k6*P^5
-5.25628e-18, =k7*P^6
6.39139e-22, =k8*P^7
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
07/09-07/14/2022	B		-0.134					-4.07241e-11	1.42499e-08	-1.10654e-03	-1.40157	0.9998			6.39139e-22	-5.25628e-18	1.55660e-14	-1.81469e-11	5.37391e-09	-1.24114e-06	-1.40147e+00	0.9918	GDF		023									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	023	
pH stem mfg:	MBARI	GDF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF023_070722_chanB.csv	
PT test channel :	B	
HCl concentration:	0.01000	Molar
k2 Calibration window:	07/09/2022 06:30	07/14/2022 08:48
Data subset:	ASCENDING	
Vrs drift rate:	-0.13442	mV/day
Vk drift rate:	2.64409	mV/day
Avg std Vk	62.69787	uVolts
Average k2:	-1.1354e-03	V/degC
Std dev k2:	4.4177e-05	V/degC
k2 f(P) c0	-1.1065e-03	
k2 f(P) c1	1.4250e-08	
k2 f(P) c2	-4.0724e-11	
k0 HCL:	-1.4016	Volts
Avg Ik:	-26.81	nano amps
Std dev Ik:	9.36	nano amps
Avg Ib:	-1.43	nano amps
Std dev Ib:	10.21	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
22.7	-1.1007e-03	3.9543e-06	-1.4016	5.5024e-05	0.9998	16	2.3	19.9
39.4	-1.0997e-03	3.3751e-06	-1.4016	5.0671e-05	0.9998	19	2.3	19.9
59.8	-1.1002e-03	3.2329e-06	-1.4016	4.5068e-05	0.9999	18	2.3	19.9
84.3	-1.1035e-03	2.7563e-06	-1.4016	3.8959e-05	0.9999	19	2.3	19.9
121.4	-1.1063e-03	2.2833e-06	-1.4016	3.4643e-05	0.9999	32	2.3	19.9
174.5	-1.1115e-03	2.3108e-06	-1.4015	3.4919e-05	0.9999	34	2.3	19.9
250.6	-1.1136e-03	1.7167e-06	-1.4016	2.4524e-05	0.9998	68	2.3	19.9
346.3	-1.1184e-03	2.1551e-06	-1.4016	3.1878e-05	0.9998	51	2.3	19.9
451.3	-1.1172e-03	3.6815e-06	-1.4019	5.4453e-05	0.9995	51	2.2	19.9
544.6	-1.1150e-03	3.3488e-06	-1.4023	4.8975e-05	0.9995	55	2.2	19.9
648.0	-1.1074e-03	3.1751e-06	-1.4029	4.6633e-05	0.9995	61	2.2	19.9
750.5	-1.1108e-03	3.9380e-06	-1.4034	5.6551e-05	0.9993	60	2.2	19.9
900.7	-1.1212e-03	4.9023e-06	-1.4041	7.0692e-05	0.9978	119	2.3	19.9
1097.1	-1.1379e-03	4.9030e-06	-1.4050	6.9565e-05	0.9978	123	2.3	19.9
1303.5	-1.1493e-03	4.3864e-06	-1.4059	6.3491e-05	0.9983	120	2.3	19.9
1504.7	-1.1780e-03	3.5378e-06	-1.4063	5.0621e-05	0.9989	119	2.3	19.9
1699.3	-1.2108e-03	3.6360e-06	-1.4062	5.4235e-05	0.9991	103	2.3	19.9
1901.7	-1.2334e-03	3.4631e-06	-1.4060	5.1626e-05	0.9992	109	2.3	19.9
2036.1	-1.2380e-03	6.2105e-06	-1.4059	8.8459e-05	0.9992	34	2.4	19.9

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	2.8823e-08	
f(P) R*R:	0.9918	
f(P) c0	-1.4015e+00	
f(P) c1	-1.2411e-06	
f(P) c2	5.3739e-09	
f(P) c3	-1.8147e-11	
f(P) c4	1.5566e-14	
f(P) c5	-5.2563e-18	
f(P) c6	6.3914e-22	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: