PH CALIBRATION FILE GENERATED ON: 04/10/2024 15:18
GDF 033
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 033, APEX# XXXX
6, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-2.81033e-08,-8.72352e-04, =k2(fP)*T
3.43447e-07, =k3*P^1
4.27204e-11, =k4*P^2
1.19850e-13, =k5*P^3
3.66785e-17, =k6*P^4
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
04/08-04/10/2024			-0.971						-2.81033e-08	-8.72352e-04	-1.26878	0.9972					3.66785e-17	1.19850e-13	4.27204e-11	3.43447e-07	-1.26861e+00	0.8958	GDF		033									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	033	
pH stem mfg:	MBARI	GDF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF033_04082024_Ch A.csv	
PT test channel :		
HCl concentration:	0.01000	Molar
k2 Calibration window:	04/08/2024 16:27	04/10/2024 14:10
Data subset:	ALL	
Vrs drift rate:	-0.97093	mV/day
Vk drift rate:	14.20425	mV/day
Avg std Vk	207.28017	uVolts
Average k2:	-8.9107e-04	V/degC
Std dev k2:	1.9593e-05	V/degC
k2 f(P) c0	-8.7235e-04	
k2 f(P) c1	-2.8103e-08	
k0 HCL:	-1.2688	Volts
Avg Ik:	-22.13	nano amps
Std dev Ik:	3.22	nano amps
Avg Ib:	4.26	nano amps
Std dev Ib:	3.53	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
6.9	-8.6018e-04	9.5558e-07	-1.2688	1.2339e-05	0.9972	2240	2.1	19.9
14.9	-8.7789e-04	4.6555e-06	-1.2685	6.7080e-05	0.9979	76	2.2	19.9
25.1	-8.6970e-04	7.5136e-06	-1.2686	1.1318e-04	0.9973	38	2.2	19.9
39.2	-8.7054e-04	5.5747e-06	-1.2686	8.5379e-05	0.9977	57	2.2	19.9
62.2	-8.8213e-04	5.6131e-06	-1.2684	8.7036e-05	0.9981	49	2.2	19.9
87.6	-8.6801e-04	8.2015e-06	-1.2687	1.1855e-04	0.9969	37	2.2	19.9
124.8	-8.8015e-04	5.1442e-06	-1.2685	7.6479e-05	0.9979	65	2.2	19.9
176.8	-8.7765e-04	5.6170e-06	-1.2686	8.1120e-05	0.9977	59	2.1	19.9
252.0	-8.8540e-04	4.0820e-06	-1.2685	5.8554e-05	0.9977	111	2.1	19.9
348.8	-8.9316e-04	4.3724e-06	-1.2684	5.9812e-05	0.9976	101	2.1	19.9
449.1	-8.8611e-04	4.2124e-06	-1.2685	6.0858e-05	0.9976	109	2.1	19.9
550.1	-8.9375e-04	4.2639e-06	-1.2683	5.8346e-05	0.9978	101	2.1	19.9
648.4	-8.8814e-04	4.4993e-06	-1.2684	6.3002e-05	0.9975	100	2.1	19.9
751.5	-8.9397e-04	3.9486e-06	-1.2682	5.6191e-05	0.9979	109	2.1	19.9
900.2	-8.9141e-04	2.9150e-06	-1.2682	4.0809e-05	0.9980	190	2.1	19.9
1098.4	-8.9680e-04	2.5553e-06	-1.2680	3.6057e-05	0.9984	204	2.1	19.9
1297.5	-9.0303e-04	3.0212e-06	-1.2678	4.3159e-05	0.9980	181	2.1	19.9
1497.8	-9.0387e-04	3.8618e-06	-1.2676	5.7686e-05	0.9970	167	2.1	19.9
1697.0	-9.2666e-04	4.0648e-06	-1.2669	6.0321e-05	0.9966	178	2.2	20.0
1895.3	-9.2471e-04	4.6356e-06	-1.2665	6.4678e-05	0.9967	133	2.2	20.0
2065.0	-9.3925e-04	1.9153e-06	-1.2660	2.6324e-05	0.9975	612	2.2	20.0

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	9.0930e-08	
f(P) R*R:	0.8958	
f(P) c0	-1.2686e+00	
f(P) c1	3.4345e-07	
f(P) c2	4.2720e-11	
f(P) c3	1.1985e-13	
f(P) c4	3.6678e-17	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: