PH CALIBRATION FILE GENERATED ON: 04/17/2024 08:36
GDF 033
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 033, APEX# XXXX
7, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!
-2.74140e-08,-7.98659e-04, =k2(fP)*T
-2.29386e-06, =k3*P^1
7.49732e-09, =k4*P^2
-7.86974e-12, =k5*P^3
3.70776e-15, =k6*P^4
-6.12702e-19, =k7*P^5
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
04/11-04/17/2024			-0.063						-2.74140e-08	-7.98659e-04	-1.27342	0.9990				-6.12702e-19	3.70776e-15	-7.86974e-12	7.49732e-09	-2.29386e-06	-1.27330e+00	0.9573	GDF		033									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	033	
pH stem mfg:	MBARI	GDF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF033_04102024_Ch A.csv	
PT test channel :		
HCl concentration:	0.01000	Molar
k2 Calibration window:	04/11/2024 21:27	04/17/2024 08:24
Data subset:	ALL	
Vrs drift rate:	-0.06254	mV/day
Vk drift rate:	-1.12003	mV/day
Avg std Vk	191.83059	uVolts
Average k2:	-8.1693e-04	V/degC
Std dev k2:	1.8159e-05	V/degC
k2 f(P) c0	-7.9866e-04	
k2 f(P) c1	-2.7414e-08	
k0 HCL:	-1.2734	Volts
Avg Ik:	-22.80	nano amps
Std dev Ik:	2.99	nano amps
Avg Ib:	3.85	nano amps
Std dev Ib:	2.52	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
6.9	-7.9463e-04	2.8557e-07	-1.2734	3.7813e-06	0.9990	7682	2.1	19.9
14.8	-7.9786e-04	2.0060e-06	-1.2734	2.8311e-05	0.9991	144	2.1	19.9
24.8	-7.9974e-04	2.6083e-06	-1.2734	3.6132e-05	0.9991	89	2.1	19.9
39.1	-7.9943e-04	1.8543e-06	-1.2734	2.6363e-05	0.9993	134	2.1	19.9
61.6	-8.0024e-04	2.1842e-06	-1.2734	3.0519e-05	0.9991	120	2.1	19.9
86.8	-8.0255e-04	2.4007e-06	-1.2734	3.4063e-05	0.9991	103	2.1	19.9
124.0	-8.0507e-04	1.7530e-06	-1.2734	2.4558e-05	0.9992	175	2.1	19.9
174.6	-8.0579e-04	1.7488e-06	-1.2735	2.4412e-05	0.9992	162	2.1	19.9
249.7	-8.0698e-04	1.2295e-06	-1.2735	1.7251e-05	0.9993	295	2.1	19.9
349.4	-8.0723e-04	1.2620e-06	-1.2735	1.7625e-05	0.9993	281	2.1	19.9
449.3	-8.0870e-04	1.2352e-06	-1.2734	1.7357e-05	0.9994	279	2.1	19.9
548.4	-8.1273e-04	1.4501e-06	-1.2733	2.0661e-05	0.9992	258	2.1	19.9
649.6	-8.1812e-04	1.3024e-06	-1.2732	1.8319e-05	0.9993	273	2.1	19.9
750.2	-8.1899e-04	1.2722e-06	-1.2731	1.7861e-05	0.9994	270	2.1	19.9
900.6	-8.2237e-04	9.3523e-07	-1.2730	1.3057e-05	0.9993	534	2.1	19.9
1100.3	-8.2749e-04	1.0247e-06	-1.2728	1.4360e-05	0.9992	525	2.1	19.9
1299.7	-8.3561e-04	1.2555e-06	-1.2726	1.7561e-05	0.9988	523	2.1	19.9
1499.9	-8.4211e-04	1.5474e-06	-1.2723	2.1767e-05	0.9983	514	2.1	19.9
1702.3	-8.4609e-04	1.8611e-06	-1.2719	2.6643e-05	0.9976	496	2.1	19.9
1900.1	-8.4984e-04	1.8160e-06	-1.2714	2.5453e-05	0.9977	508	2.2	19.9
2064.1	-8.5395e-04	7.0112e-07	-1.2710	9.9609e-06	0.9987	1978	2.2	19.9

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	3.3311e-08	
f(P) R*R:	0.9573	
f(P) c0	-1.2733e+00	
f(P) c1	-2.2939e-06	
f(P) c2	7.4973e-09	
f(P) c3	-7.8697e-12	
f(P) c4	3.7078e-15	
f(P) c5	-6.1270e-19	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: