PH CALIBRATION FILE GENERATED ON: 08/12/2024 10:29
GDF 033
MSC XXXX
APEX ID XXXX

** START CONFIG FILE COPY BLOCK **
Durafet SN = 033, APEX# XXXX
7, number of calibration coefficients
NO K0 DATA WAS PEOCESSED YET OR LOADED INTO GUI!!!!   Pre-deployment test tank k0: -1.27397044684969
-2.48579e-08,-8.03187e-04, =k2(fP)*T
-2.79153e-06, =k3*P^1
1.01838e-08, =k4*P^2
-1.19397e-11, =k5*P^3
6.03407e-15, =k6*P^4
-1.06988e-18, =k7*P^5
** END CONFIG FILE COPY BLOCK **

** START pHlog.xlsx COPY BLOCK **
Ptchamber	Ch	PT runs	VrsDrift	k2 f(P) C6	k2 f(P) C5	k2 f(P) C4	k2 f(P) C3	k2 f(P) C2	k2 f(P) C1	k2 f(P) C0	k0(HCl)	R^2	f(P) k8	f(P) k7	f(P) k6	f(P) k5	f(P) k4	f(P) k3	f(P) k2	f(P) k1	f(P) k0	R^2	pH Design	Die	DF#	k0CalDates	k0Soln	k0_pOFF	Stdk0_pOFF	k0_pON	Stdk0_pON
04/12-04/17/2024			-0.064						-2.48579e-08	-8.03187e-04	-1.27341	0.9993				-1.06988e-18	6.03407e-15	-1.19397e-11	1.01838e-08	-2.79153e-06	-1.27328e+00	0.9471	GDF		033									
** END pHlog.xlsx COPY BLOCK **


** SUMMARY K2 DATA: **
Durafet SN:	033	
pH stem mfg:	MBARI	GDF
PT Source directory :	\\atlas\chem\DuraFET\CALIBRATION\K2_PTChamber_data\	
PT Source file :	GDF033_04102024_Ch A.csv	
PT test channel :		
HCl concentration:	0.01000	Molar
k2 Calibration window:	04/12/2024 03:23	04/17/2024 05:45
Data subset:	ASCENDING	
Vrs drift rate:	-0.06407	mV/day
Vk drift rate:	-1.13582	mV/day
Avg std Vk	191.92757	uVolts
Average k2:	-8.1972e-04	V/degC
Std dev k2:	1.6678e-05	V/degC
k2 f(P) c0	-8.0319e-04	
k2 f(P) c1	-2.4858e-08	
k0 HCL:	-1.2734	Volts
Avg Ik:	-22.77	nano amps
Std dev Ik:	3.04	nano amps
Avg Ib:	3.89	nano amps
Std dev Ib:	2.53	nano amps

** PRESSURE BINNED K2 DATA: **
Avg Press	k2	std k2	k0	std k0	R*R	N	Tmin	Tmax
6.9	-7.9747e-04	7.2023e-06	-1.2734	1.0145e-04	0.9993	10	2.1	19.9
14.9	-7.9994e-04	2.8273e-06	-1.2734	3.9966e-05	0.9992	69	2.1	19.9
24.8	-8.0232e-04	3.6652e-06	-1.2734	5.0125e-05	0.9991	43	2.1	19.9
39.3	-8.0315e-04	2.5646e-06	-1.2734	3.6659e-05	0.9994	65	2.1	19.9
61.6	-8.0482e-04	3.0617e-06	-1.2734	4.3118e-05	0.9992	57	2.1	19.9
86.8	-8.0514e-04	3.4433e-06	-1.2734	4.8249e-05	0.9991	51	2.1	19.9
124.4	-8.0673e-04	2.4812e-06	-1.2734	3.4738e-05	0.9992	86	2.1	19.9
175.2	-8.0855e-04	2.6176e-06	-1.2735	3.6625e-05	0.9992	79	2.1	19.9
250.0	-8.0973e-04	1.8744e-06	-1.2735	2.6348e-05	0.9992	145	2.1	19.9
349.7	-8.1304e-04	1.8275e-06	-1.2734	2.5366e-05	0.9993	140	2.1	19.9
449.4	-8.1596e-04	1.7494e-06	-1.2733	2.4585e-05	0.9994	138	2.1	19.9
547.2	-8.2314e-04	1.8311e-06	-1.2731	2.6790e-05	0.9994	122	2.1	19.9
649.9	-8.2763e-04	1.1361e-06	-1.2730	1.6026e-05	0.9997	136	2.1	19.9
750.6	-8.2571e-04	1.3425e-06	-1.2730	1.8800e-05	0.9996	135	2.1	19.9
901.3	-8.2367e-04	1.3868e-06	-1.2729	1.9346e-05	0.9992	267	2.1	19.9
1100.9	-8.2375e-04	1.4713e-06	-1.2729	2.0600e-05	0.9992	261	2.1	19.9
1299.5	-8.3241e-04	1.3527e-06	-1.2727	1.8867e-05	0.9993	259	2.1	19.9
1499.2	-8.4236e-04	1.4175e-06	-1.2724	1.9925e-05	0.9993	259	2.1	19.9
1700.6	-8.4721e-04	1.6967e-06	-1.2720	2.3668e-05	0.9990	259	2.2	19.9
1900.9	-8.4982e-04	1.8119e-06	-1.2716	2.5424e-05	0.9989	252	2.2	19.9
2034.2	-8.5156e-04	2.6288e-06	-1.2713	3.6189e-05	0.9992	86	2.2	19.9

** PH POLYNOMIAL PRESSURE COEFFICIENTS: **
f(P) NSSR:	2.1821e-08	
f(P) R*R:	0.9471	
f(P) c0	-1.2733e+00	
f(P) c1	-2.7915e-06	
f(P) c2	1.0184e-08	
f(P) c3	-1.1940e-11	
f(P) c4	6.0341e-15	
f(P) c5	-1.0699e-18	

NO KO DATA FILE LOADED INTO CALIBRATION GUI!!!:
Has the k0 calibration be completed yet?:
Is the MSC # correct? Check MSC / SN match up: